|  | /*====================================================================== | 
|  |  | 
|  | Aironet driver for 4500 and 4800 series cards | 
|  |  | 
|  | This code is released under both the GPL version 2 and BSD licenses. | 
|  | Either license may be used.  The respective licenses are found at | 
|  | the end of this file. | 
|  |  | 
|  | This code was developed by Benjamin Reed <breed@users.sourceforge.net> | 
|  | including portions of which come from the Aironet PC4500 | 
|  | Developer's Reference Manual and used with permission.  Copyright | 
|  | (C) 1999 Benjamin Reed.  All Rights Reserved.  Permission to use | 
|  | code in the Developer's manual was granted for this driver by | 
|  | Aironet.  Major code contributions were received from Javier Achirica | 
|  | <achirica@users.sourceforge.net> and Jean Tourrilhes <jt@hpl.hp.com>. | 
|  | Code was also integrated from the Cisco Aironet driver for Linux. | 
|  | Support for MPI350 cards was added by Fabrice Bellet | 
|  | <fabrice@bellet.info>. | 
|  |  | 
|  | ======================================================================*/ | 
|  |  | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/smp_lock.h> | 
|  |  | 
|  | #include <linux/sched.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/scatterlist.h> | 
|  | #include <linux/crypto.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/system.h> | 
|  |  | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/pci.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <net/ieee80211.h> | 
|  |  | 
|  | #include "airo.h" | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | static struct pci_device_id card_ids[] = { | 
|  | { 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0x14b9, 0x4500, PCI_ANY_ID, PCI_ANY_ID }, | 
|  | { 0x14b9, 0x4800, PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0x14b9, 0x0340, PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0x14b9, 0x0350, PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0x14b9, 0x5000, PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0x14b9, 0xa504, PCI_ANY_ID, PCI_ANY_ID, }, | 
|  | { 0, } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, card_ids); | 
|  |  | 
|  | static int airo_pci_probe(struct pci_dev *, const struct pci_device_id *); | 
|  | static void airo_pci_remove(struct pci_dev *); | 
|  | static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state); | 
|  | static int airo_pci_resume(struct pci_dev *pdev); | 
|  |  | 
|  | static struct pci_driver airo_driver = { | 
|  | .name     = "airo", | 
|  | .id_table = card_ids, | 
|  | .probe    = airo_pci_probe, | 
|  | .remove   = __devexit_p(airo_pci_remove), | 
|  | .suspend  = airo_pci_suspend, | 
|  | .resume   = airo_pci_resume, | 
|  | }; | 
|  | #endif /* CONFIG_PCI */ | 
|  |  | 
|  | /* Include Wireless Extension definition and check version - Jean II */ | 
|  | #include <linux/wireless.h> | 
|  | #define WIRELESS_SPY		// enable iwspy support | 
|  | #include <net/iw_handler.h>	// New driver API | 
|  |  | 
|  | #define CISCO_EXT		// enable Cisco extensions | 
|  | #ifdef CISCO_EXT | 
|  | #include <linux/delay.h> | 
|  | #endif | 
|  |  | 
|  | /* Hack to do some power saving */ | 
|  | #define POWER_ON_DOWN | 
|  |  | 
|  | /* As you can see this list is HUGH! | 
|  | I really don't know what a lot of these counts are about, but they | 
|  | are all here for completeness.  If the IGNLABEL macro is put in | 
|  | infront of the label, that statistic will not be included in the list | 
|  | of statistics in the /proc filesystem */ | 
|  |  | 
|  | #define IGNLABEL(comment) NULL | 
|  | static char *statsLabels[] = { | 
|  | "RxOverrun", | 
|  | IGNLABEL("RxPlcpCrcErr"), | 
|  | IGNLABEL("RxPlcpFormatErr"), | 
|  | IGNLABEL("RxPlcpLengthErr"), | 
|  | "RxMacCrcErr", | 
|  | "RxMacCrcOk", | 
|  | "RxWepErr", | 
|  | "RxWepOk", | 
|  | "RetryLong", | 
|  | "RetryShort", | 
|  | "MaxRetries", | 
|  | "NoAck", | 
|  | "NoCts", | 
|  | "RxAck", | 
|  | "RxCts", | 
|  | "TxAck", | 
|  | "TxRts", | 
|  | "TxCts", | 
|  | "TxMc", | 
|  | "TxBc", | 
|  | "TxUcFrags", | 
|  | "TxUcPackets", | 
|  | "TxBeacon", | 
|  | "RxBeacon", | 
|  | "TxSinColl", | 
|  | "TxMulColl", | 
|  | "DefersNo", | 
|  | "DefersProt", | 
|  | "DefersEngy", | 
|  | "DupFram", | 
|  | "RxFragDisc", | 
|  | "TxAged", | 
|  | "RxAged", | 
|  | "LostSync-MaxRetry", | 
|  | "LostSync-MissedBeacons", | 
|  | "LostSync-ArlExceeded", | 
|  | "LostSync-Deauth", | 
|  | "LostSync-Disassoced", | 
|  | "LostSync-TsfTiming", | 
|  | "HostTxMc", | 
|  | "HostTxBc", | 
|  | "HostTxUc", | 
|  | "HostTxFail", | 
|  | "HostRxMc", | 
|  | "HostRxBc", | 
|  | "HostRxUc", | 
|  | "HostRxDiscard", | 
|  | IGNLABEL("HmacTxMc"), | 
|  | IGNLABEL("HmacTxBc"), | 
|  | IGNLABEL("HmacTxUc"), | 
|  | IGNLABEL("HmacTxFail"), | 
|  | IGNLABEL("HmacRxMc"), | 
|  | IGNLABEL("HmacRxBc"), | 
|  | IGNLABEL("HmacRxUc"), | 
|  | IGNLABEL("HmacRxDiscard"), | 
|  | IGNLABEL("HmacRxAccepted"), | 
|  | "SsidMismatch", | 
|  | "ApMismatch", | 
|  | "RatesMismatch", | 
|  | "AuthReject", | 
|  | "AuthTimeout", | 
|  | "AssocReject", | 
|  | "AssocTimeout", | 
|  | IGNLABEL("ReasonOutsideTable"), | 
|  | IGNLABEL("ReasonStatus1"), | 
|  | IGNLABEL("ReasonStatus2"), | 
|  | IGNLABEL("ReasonStatus3"), | 
|  | IGNLABEL("ReasonStatus4"), | 
|  | IGNLABEL("ReasonStatus5"), | 
|  | IGNLABEL("ReasonStatus6"), | 
|  | IGNLABEL("ReasonStatus7"), | 
|  | IGNLABEL("ReasonStatus8"), | 
|  | IGNLABEL("ReasonStatus9"), | 
|  | IGNLABEL("ReasonStatus10"), | 
|  | IGNLABEL("ReasonStatus11"), | 
|  | IGNLABEL("ReasonStatus12"), | 
|  | IGNLABEL("ReasonStatus13"), | 
|  | IGNLABEL("ReasonStatus14"), | 
|  | IGNLABEL("ReasonStatus15"), | 
|  | IGNLABEL("ReasonStatus16"), | 
|  | IGNLABEL("ReasonStatus17"), | 
|  | IGNLABEL("ReasonStatus18"), | 
|  | IGNLABEL("ReasonStatus19"), | 
|  | "RxMan", | 
|  | "TxMan", | 
|  | "RxRefresh", | 
|  | "TxRefresh", | 
|  | "RxPoll", | 
|  | "TxPoll", | 
|  | "HostRetries", | 
|  | "LostSync-HostReq", | 
|  | "HostTxBytes", | 
|  | "HostRxBytes", | 
|  | "ElapsedUsec", | 
|  | "ElapsedSec", | 
|  | "LostSyncBetterAP", | 
|  | "PrivacyMismatch", | 
|  | "Jammed", | 
|  | "DiscRxNotWepped", | 
|  | "PhyEleMismatch", | 
|  | (char*)-1 }; | 
|  | #ifndef RUN_AT | 
|  | #define RUN_AT(x) (jiffies+(x)) | 
|  | #endif | 
|  |  | 
|  |  | 
|  | /* These variables are for insmod, since it seems that the rates | 
|  | can only be set in setup_card.  Rates should be a comma separated | 
|  | (no spaces) list of rates (up to 8). */ | 
|  |  | 
|  | static int rates[8]; | 
|  | static int basic_rate; | 
|  | static char *ssids[3]; | 
|  |  | 
|  | static int io[4]; | 
|  | static int irq[4]; | 
|  |  | 
|  | static | 
|  | int maxencrypt /* = 0 */; /* The highest rate that the card can encrypt at. | 
|  | 0 means no limit.  For old cards this was 4 */ | 
|  |  | 
|  | static int auto_wep /* = 0 */; /* If set, it tries to figure out the wep mode */ | 
|  | static int aux_bap /* = 0 */; /* Checks to see if the aux ports are needed to read | 
|  | the bap, needed on some older cards and buses. */ | 
|  | static int adhoc; | 
|  |  | 
|  | static int probe = 1; | 
|  |  | 
|  | static int proc_uid /* = 0 */; | 
|  |  | 
|  | static int proc_gid /* = 0 */; | 
|  |  | 
|  | static int airo_perm = 0555; | 
|  |  | 
|  | static int proc_perm = 0644; | 
|  |  | 
|  | MODULE_AUTHOR("Benjamin Reed"); | 
|  | MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ | 
|  | cards.  Direct support for ISA/PCI/MPI cards and support \ | 
|  | for PCMCIA when used with airo_cs."); | 
|  | MODULE_LICENSE("Dual BSD/GPL"); | 
|  | MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350"); | 
|  | module_param_array(io, int, NULL, 0); | 
|  | module_param_array(irq, int, NULL, 0); | 
|  | module_param(basic_rate, int, 0); | 
|  | module_param_array(rates, int, NULL, 0); | 
|  | module_param_array(ssids, charp, NULL, 0); | 
|  | module_param(auto_wep, int, 0); | 
|  | MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \ | 
|  | the authentication options until an association is made.  The value of \ | 
|  | auto_wep is number of the wep keys to check.  A value of 2 will try using \ | 
|  | the key at index 0 and index 1."); | 
|  | module_param(aux_bap, int, 0); | 
|  | MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \ | 
|  | than seems to work better for older cards with some older buses.  Before \ | 
|  | switching it checks that the switch is needed."); | 
|  | module_param(maxencrypt, int, 0); | 
|  | MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \ | 
|  | encryption.  Units are in 512kbs.  Zero (default) means there is no limit. \ | 
|  | Older cards used to be limited to 2mbs (4)."); | 
|  | module_param(adhoc, int, 0); | 
|  | MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode."); | 
|  | module_param(probe, int, 0); | 
|  | MODULE_PARM_DESC(probe, "If zero, the driver won't start the card."); | 
|  |  | 
|  | module_param(proc_uid, int, 0); | 
|  | MODULE_PARM_DESC(proc_uid, "The uid that the /proc files will belong to."); | 
|  | module_param(proc_gid, int, 0); | 
|  | MODULE_PARM_DESC(proc_gid, "The gid that the /proc files will belong to."); | 
|  | module_param(airo_perm, int, 0); | 
|  | MODULE_PARM_DESC(airo_perm, "The permission bits of /proc/[driver/]aironet."); | 
|  | module_param(proc_perm, int, 0); | 
|  | MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc"); | 
|  |  | 
|  | /* This is a kind of sloppy hack to get this information to OUT4500 and | 
|  | IN4500.  I would be extremely interested in the situation where this | 
|  | doesn't work though!!! */ | 
|  | static int do8bitIO = 0; | 
|  |  | 
|  | /* Return codes */ | 
|  | #define SUCCESS 0 | 
|  | #define ERROR -1 | 
|  | #define NO_PACKET -2 | 
|  |  | 
|  | /* Commands */ | 
|  | #define NOP2		0x0000 | 
|  | #define MAC_ENABLE	0x0001 | 
|  | #define MAC_DISABLE	0x0002 | 
|  | #define CMD_LOSE_SYNC	0x0003 /* Not sure what this does... */ | 
|  | #define CMD_SOFTRESET	0x0004 | 
|  | #define HOSTSLEEP	0x0005 | 
|  | #define CMD_MAGIC_PKT	0x0006 | 
|  | #define CMD_SETWAKEMASK	0x0007 | 
|  | #define CMD_READCFG	0x0008 | 
|  | #define CMD_SETMODE	0x0009 | 
|  | #define CMD_ALLOCATETX	0x000a | 
|  | #define CMD_TRANSMIT	0x000b | 
|  | #define CMD_DEALLOCATETX 0x000c | 
|  | #define NOP		0x0010 | 
|  | #define CMD_WORKAROUND	0x0011 | 
|  | #define CMD_ALLOCATEAUX 0x0020 | 
|  | #define CMD_ACCESS	0x0021 | 
|  | #define CMD_PCIBAP	0x0022 | 
|  | #define CMD_PCIAUX	0x0023 | 
|  | #define CMD_ALLOCBUF	0x0028 | 
|  | #define CMD_GETTLV	0x0029 | 
|  | #define CMD_PUTTLV	0x002a | 
|  | #define CMD_DELTLV	0x002b | 
|  | #define CMD_FINDNEXTTLV	0x002c | 
|  | #define CMD_PSPNODES	0x0030 | 
|  | #define CMD_SETCW	0x0031 | 
|  | #define CMD_SETPCF	0x0032 | 
|  | #define CMD_SETPHYREG	0x003e | 
|  | #define CMD_TXTEST	0x003f | 
|  | #define MAC_ENABLETX	0x0101 | 
|  | #define CMD_LISTBSS	0x0103 | 
|  | #define CMD_SAVECFG	0x0108 | 
|  | #define CMD_ENABLEAUX	0x0111 | 
|  | #define CMD_WRITERID	0x0121 | 
|  | #define CMD_USEPSPNODES	0x0130 | 
|  | #define MAC_ENABLERX	0x0201 | 
|  |  | 
|  | /* Command errors */ | 
|  | #define ERROR_QUALIF 0x00 | 
|  | #define ERROR_ILLCMD 0x01 | 
|  | #define ERROR_ILLFMT 0x02 | 
|  | #define ERROR_INVFID 0x03 | 
|  | #define ERROR_INVRID 0x04 | 
|  | #define ERROR_LARGE 0x05 | 
|  | #define ERROR_NDISABL 0x06 | 
|  | #define ERROR_ALLOCBSY 0x07 | 
|  | #define ERROR_NORD 0x0B | 
|  | #define ERROR_NOWR 0x0C | 
|  | #define ERROR_INVFIDTX 0x0D | 
|  | #define ERROR_TESTACT 0x0E | 
|  | #define ERROR_TAGNFND 0x12 | 
|  | #define ERROR_DECODE 0x20 | 
|  | #define ERROR_DESCUNAV 0x21 | 
|  | #define ERROR_BADLEN 0x22 | 
|  | #define ERROR_MODE 0x80 | 
|  | #define ERROR_HOP 0x81 | 
|  | #define ERROR_BINTER 0x82 | 
|  | #define ERROR_RXMODE 0x83 | 
|  | #define ERROR_MACADDR 0x84 | 
|  | #define ERROR_RATES 0x85 | 
|  | #define ERROR_ORDER 0x86 | 
|  | #define ERROR_SCAN 0x87 | 
|  | #define ERROR_AUTH 0x88 | 
|  | #define ERROR_PSMODE 0x89 | 
|  | #define ERROR_RTYPE 0x8A | 
|  | #define ERROR_DIVER 0x8B | 
|  | #define ERROR_SSID 0x8C | 
|  | #define ERROR_APLIST 0x8D | 
|  | #define ERROR_AUTOWAKE 0x8E | 
|  | #define ERROR_LEAP 0x8F | 
|  |  | 
|  | /* Registers */ | 
|  | #define COMMAND 0x00 | 
|  | #define PARAM0 0x02 | 
|  | #define PARAM1 0x04 | 
|  | #define PARAM2 0x06 | 
|  | #define STATUS 0x08 | 
|  | #define RESP0 0x0a | 
|  | #define RESP1 0x0c | 
|  | #define RESP2 0x0e | 
|  | #define LINKSTAT 0x10 | 
|  | #define SELECT0 0x18 | 
|  | #define OFFSET0 0x1c | 
|  | #define RXFID 0x20 | 
|  | #define TXALLOCFID 0x22 | 
|  | #define TXCOMPLFID 0x24 | 
|  | #define DATA0 0x36 | 
|  | #define EVSTAT 0x30 | 
|  | #define EVINTEN 0x32 | 
|  | #define EVACK 0x34 | 
|  | #define SWS0 0x28 | 
|  | #define SWS1 0x2a | 
|  | #define SWS2 0x2c | 
|  | #define SWS3 0x2e | 
|  | #define AUXPAGE 0x3A | 
|  | #define AUXOFF 0x3C | 
|  | #define AUXDATA 0x3E | 
|  |  | 
|  | #define FID_TX 1 | 
|  | #define FID_RX 2 | 
|  | /* Offset into aux memory for descriptors */ | 
|  | #define AUX_OFFSET 0x800 | 
|  | /* Size of allocated packets */ | 
|  | #define PKTSIZE 1840 | 
|  | #define RIDSIZE 2048 | 
|  | /* Size of the transmit queue */ | 
|  | #define MAXTXQ 64 | 
|  |  | 
|  | /* BAP selectors */ | 
|  | #define BAP0 0 // Used for receiving packets | 
|  | #define BAP1 2 // Used for xmiting packets and working with RIDS | 
|  |  | 
|  | /* Flags */ | 
|  | #define COMMAND_BUSY 0x8000 | 
|  |  | 
|  | #define BAP_BUSY 0x8000 | 
|  | #define BAP_ERR 0x4000 | 
|  | #define BAP_DONE 0x2000 | 
|  |  | 
|  | #define PROMISC 0xffff | 
|  | #define NOPROMISC 0x0000 | 
|  |  | 
|  | #define EV_CMD 0x10 | 
|  | #define EV_CLEARCOMMANDBUSY 0x4000 | 
|  | #define EV_RX 0x01 | 
|  | #define EV_TX 0x02 | 
|  | #define EV_TXEXC 0x04 | 
|  | #define EV_ALLOC 0x08 | 
|  | #define EV_LINK 0x80 | 
|  | #define EV_AWAKE 0x100 | 
|  | #define EV_TXCPY 0x400 | 
|  | #define EV_UNKNOWN 0x800 | 
|  | #define EV_MIC 0x1000 /* Message Integrity Check Interrupt */ | 
|  | #define EV_AWAKEN 0x2000 | 
|  | #define STATUS_INTS (EV_AWAKE|EV_LINK|EV_TXEXC|EV_TX|EV_TXCPY|EV_RX|EV_MIC) | 
|  |  | 
|  | #ifdef CHECK_UNKNOWN_INTS | 
|  | #define IGNORE_INTS ( EV_CMD | EV_UNKNOWN) | 
|  | #else | 
|  | #define IGNORE_INTS (~STATUS_INTS) | 
|  | #endif | 
|  |  | 
|  | /* RID TYPES */ | 
|  | #define RID_RW 0x20 | 
|  |  | 
|  | /* The RIDs */ | 
|  | #define RID_CAPABILITIES 0xFF00 | 
|  | #define RID_APINFO     0xFF01 | 
|  | #define RID_RADIOINFO  0xFF02 | 
|  | #define RID_UNKNOWN3   0xFF03 | 
|  | #define RID_RSSI       0xFF04 | 
|  | #define RID_CONFIG     0xFF10 | 
|  | #define RID_SSID       0xFF11 | 
|  | #define RID_APLIST     0xFF12 | 
|  | #define RID_DRVNAME    0xFF13 | 
|  | #define RID_ETHERENCAP 0xFF14 | 
|  | #define RID_WEP_TEMP   0xFF15 | 
|  | #define RID_WEP_PERM   0xFF16 | 
|  | #define RID_MODULATION 0xFF17 | 
|  | #define RID_OPTIONS    0xFF18 | 
|  | #define RID_ACTUALCONFIG 0xFF20 /*readonly*/ | 
|  | #define RID_FACTORYCONFIG 0xFF21 | 
|  | #define RID_UNKNOWN22  0xFF22 | 
|  | #define RID_LEAPUSERNAME 0xFF23 | 
|  | #define RID_LEAPPASSWORD 0xFF24 | 
|  | #define RID_STATUS     0xFF50 | 
|  | #define RID_BEACON_HST 0xFF51 | 
|  | #define RID_BUSY_HST   0xFF52 | 
|  | #define RID_RETRIES_HST 0xFF53 | 
|  | #define RID_UNKNOWN54  0xFF54 | 
|  | #define RID_UNKNOWN55  0xFF55 | 
|  | #define RID_UNKNOWN56  0xFF56 | 
|  | #define RID_MIC        0xFF57 | 
|  | #define RID_STATS16    0xFF60 | 
|  | #define RID_STATS16DELTA 0xFF61 | 
|  | #define RID_STATS16DELTACLEAR 0xFF62 | 
|  | #define RID_STATS      0xFF68 | 
|  | #define RID_STATSDELTA 0xFF69 | 
|  | #define RID_STATSDELTACLEAR 0xFF6A | 
|  | #define RID_ECHOTEST_RID 0xFF70 | 
|  | #define RID_ECHOTEST_RESULTS 0xFF71 | 
|  | #define RID_BSSLISTFIRST 0xFF72 | 
|  | #define RID_BSSLISTNEXT  0xFF73 | 
|  | #define RID_WPA_BSSLISTFIRST 0xFF74 | 
|  | #define RID_WPA_BSSLISTNEXT  0xFF75 | 
|  |  | 
|  | typedef struct { | 
|  | u16 cmd; | 
|  | u16 parm0; | 
|  | u16 parm1; | 
|  | u16 parm2; | 
|  | } Cmd; | 
|  |  | 
|  | typedef struct { | 
|  | u16 status; | 
|  | u16 rsp0; | 
|  | u16 rsp1; | 
|  | u16 rsp2; | 
|  | } Resp; | 
|  |  | 
|  | /* | 
|  | * Rids and endian-ness:  The Rids will always be in cpu endian, since | 
|  | * this all the patches from the big-endian guys end up doing that. | 
|  | * so all rid access should use the read/writeXXXRid routines. | 
|  | */ | 
|  |  | 
|  | /* This is redundant for x86 archs, but it seems necessary for ARM */ | 
|  | #pragma pack(1) | 
|  |  | 
|  | /* This structure came from an email sent to me from an engineer at | 
|  | aironet for inclusion into this driver */ | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u16 kindex; | 
|  | u8 mac[ETH_ALEN]; | 
|  | u16 klen; | 
|  | u8 key[16]; | 
|  | } WepKeyRid; | 
|  |  | 
|  | /* These structures are from the Aironet's PC4500 Developers Manual */ | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u8 ssid[32]; | 
|  | } Ssid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | Ssid ssids[3]; | 
|  | } SsidRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u16 modulation; | 
|  | #define MOD_DEFAULT 0 | 
|  | #define MOD_CCK 1 | 
|  | #define MOD_MOK 2 | 
|  | } ModulationRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; /* sizeof(ConfigRid) */ | 
|  | u16 opmode; /* operating mode */ | 
|  | #define MODE_STA_IBSS 0 | 
|  | #define MODE_STA_ESS 1 | 
|  | #define MODE_AP 2 | 
|  | #define MODE_AP_RPTR 3 | 
|  | #define MODE_ETHERNET_HOST (0<<8) /* rx payloads converted */ | 
|  | #define MODE_LLC_HOST (1<<8) /* rx payloads left as is */ | 
|  | #define MODE_AIRONET_EXTEND (1<<9) /* enable Aironet extenstions */ | 
|  | #define MODE_AP_INTERFACE (1<<10) /* enable ap interface extensions */ | 
|  | #define MODE_ANTENNA_ALIGN (1<<11) /* enable antenna alignment */ | 
|  | #define MODE_ETHER_LLC (1<<12) /* enable ethernet LLC */ | 
|  | #define MODE_LEAF_NODE (1<<13) /* enable leaf node bridge */ | 
|  | #define MODE_CF_POLLABLE (1<<14) /* enable CF pollable */ | 
|  | #define MODE_MIC (1<<15) /* enable MIC */ | 
|  | u16 rmode; /* receive mode */ | 
|  | #define RXMODE_BC_MC_ADDR 0 | 
|  | #define RXMODE_BC_ADDR 1 /* ignore multicasts */ | 
|  | #define RXMODE_ADDR 2 /* ignore multicast and broadcast */ | 
|  | #define RXMODE_RFMON 3 /* wireless monitor mode */ | 
|  | #define RXMODE_RFMON_ANYBSS 4 | 
|  | #define RXMODE_LANMON 5 /* lan style monitor -- data packets only */ | 
|  | #define RXMODE_DISABLE_802_3_HEADER (1<<8) /* disables 802.3 header on rx */ | 
|  | #define RXMODE_NORMALIZED_RSSI (1<<9) /* return normalized RSSI */ | 
|  | u16 fragThresh; | 
|  | u16 rtsThres; | 
|  | u8 macAddr[ETH_ALEN]; | 
|  | u8 rates[8]; | 
|  | u16 shortRetryLimit; | 
|  | u16 longRetryLimit; | 
|  | u16 txLifetime; /* in kusec */ | 
|  | u16 rxLifetime; /* in kusec */ | 
|  | u16 stationary; | 
|  | u16 ordering; | 
|  | u16 u16deviceType; /* for overriding device type */ | 
|  | u16 cfpRate; | 
|  | u16 cfpDuration; | 
|  | u16 _reserved1[3]; | 
|  | /*---------- Scanning/Associating ----------*/ | 
|  | u16 scanMode; | 
|  | #define SCANMODE_ACTIVE 0 | 
|  | #define SCANMODE_PASSIVE 1 | 
|  | #define SCANMODE_AIROSCAN 2 | 
|  | u16 probeDelay; /* in kusec */ | 
|  | u16 probeEnergyTimeout; /* in kusec */ | 
|  | u16 probeResponseTimeout; | 
|  | u16 beaconListenTimeout; | 
|  | u16 joinNetTimeout; | 
|  | u16 authTimeout; | 
|  | u16 authType; | 
|  | #define AUTH_OPEN 0x1 | 
|  | #define AUTH_ENCRYPT 0x101 | 
|  | #define AUTH_SHAREDKEY 0x102 | 
|  | #define AUTH_ALLOW_UNENCRYPTED 0x200 | 
|  | u16 associationTimeout; | 
|  | u16 specifiedApTimeout; | 
|  | u16 offlineScanInterval; | 
|  | u16 offlineScanDuration; | 
|  | u16 linkLossDelay; | 
|  | u16 maxBeaconLostTime; | 
|  | u16 refreshInterval; | 
|  | #define DISABLE_REFRESH 0xFFFF | 
|  | u16 _reserved1a[1]; | 
|  | /*---------- Power save operation ----------*/ | 
|  | u16 powerSaveMode; | 
|  | #define POWERSAVE_CAM 0 | 
|  | #define POWERSAVE_PSP 1 | 
|  | #define POWERSAVE_PSPCAM 2 | 
|  | u16 sleepForDtims; | 
|  | u16 listenInterval; | 
|  | u16 fastListenInterval; | 
|  | u16 listenDecay; | 
|  | u16 fastListenDelay; | 
|  | u16 _reserved2[2]; | 
|  | /*---------- Ap/Ibss config items ----------*/ | 
|  | u16 beaconPeriod; | 
|  | u16 atimDuration; | 
|  | u16 hopPeriod; | 
|  | u16 channelSet; | 
|  | u16 channel; | 
|  | u16 dtimPeriod; | 
|  | u16 bridgeDistance; | 
|  | u16 radioID; | 
|  | /*---------- Radio configuration ----------*/ | 
|  | u16 radioType; | 
|  | #define RADIOTYPE_DEFAULT 0 | 
|  | #define RADIOTYPE_802_11 1 | 
|  | #define RADIOTYPE_LEGACY 2 | 
|  | u8 rxDiversity; | 
|  | u8 txDiversity; | 
|  | u16 txPower; | 
|  | #define TXPOWER_DEFAULT 0 | 
|  | u16 rssiThreshold; | 
|  | #define RSSI_DEFAULT 0 | 
|  | u16 modulation; | 
|  | #define PREAMBLE_AUTO 0 | 
|  | #define PREAMBLE_LONG 1 | 
|  | #define PREAMBLE_SHORT 2 | 
|  | u16 preamble; | 
|  | u16 homeProduct; | 
|  | u16 radioSpecific; | 
|  | /*---------- Aironet Extensions ----------*/ | 
|  | u8 nodeName[16]; | 
|  | u16 arlThreshold; | 
|  | u16 arlDecay; | 
|  | u16 arlDelay; | 
|  | u16 _reserved4[1]; | 
|  | /*---------- Aironet Extensions ----------*/ | 
|  | u8 magicAction; | 
|  | #define MAGIC_ACTION_STSCHG 1 | 
|  | #define MAGIC_ACTION_RESUME 2 | 
|  | #define MAGIC_IGNORE_MCAST (1<<8) | 
|  | #define MAGIC_IGNORE_BCAST (1<<9) | 
|  | #define MAGIC_SWITCH_TO_PSP (0<<10) | 
|  | #define MAGIC_STAY_IN_CAM (1<<10) | 
|  | u8 magicControl; | 
|  | u16 autoWake; | 
|  | } ConfigRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u8 mac[ETH_ALEN]; | 
|  | u16 mode; | 
|  | u16 errorCode; | 
|  | u16 sigQuality; | 
|  | u16 SSIDlen; | 
|  | char SSID[32]; | 
|  | char apName[16]; | 
|  | u8 bssid[4][ETH_ALEN]; | 
|  | u16 beaconPeriod; | 
|  | u16 dimPeriod; | 
|  | u16 atimDuration; | 
|  | u16 hopPeriod; | 
|  | u16 channelSet; | 
|  | u16 channel; | 
|  | u16 hopsToBackbone; | 
|  | u16 apTotalLoad; | 
|  | u16 generatedLoad; | 
|  | u16 accumulatedArl; | 
|  | u16 signalQuality; | 
|  | u16 currentXmitRate; | 
|  | u16 apDevExtensions; | 
|  | u16 normalizedSignalStrength; | 
|  | u16 shortPreamble; | 
|  | u8 apIP[4]; | 
|  | u8 noisePercent; /* Noise percent in last second */ | 
|  | u8 noisedBm; /* Noise dBm in last second */ | 
|  | u8 noiseAvePercent; /* Noise percent in last minute */ | 
|  | u8 noiseAvedBm; /* Noise dBm in last minute */ | 
|  | u8 noiseMaxPercent; /* Highest noise percent in last minute */ | 
|  | u8 noiseMaxdBm; /* Highest noise dbm in last minute */ | 
|  | u16 load; | 
|  | u8 carrier[4]; | 
|  | u16 assocStatus; | 
|  | #define STAT_NOPACKETS 0 | 
|  | #define STAT_NOCARRIERSET 10 | 
|  | #define STAT_GOTCARRIERSET 11 | 
|  | #define STAT_WRONGSSID 20 | 
|  | #define STAT_BADCHANNEL 25 | 
|  | #define STAT_BADBITRATES 30 | 
|  | #define STAT_BADPRIVACY 35 | 
|  | #define STAT_APFOUND 40 | 
|  | #define STAT_APREJECTED 50 | 
|  | #define STAT_AUTHENTICATING 60 | 
|  | #define STAT_DEAUTHENTICATED 61 | 
|  | #define STAT_AUTHTIMEOUT 62 | 
|  | #define STAT_ASSOCIATING 70 | 
|  | #define STAT_DEASSOCIATED 71 | 
|  | #define STAT_ASSOCTIMEOUT 72 | 
|  | #define STAT_NOTAIROAP 73 | 
|  | #define STAT_ASSOCIATED 80 | 
|  | #define STAT_LEAPING 90 | 
|  | #define STAT_LEAPFAILED 91 | 
|  | #define STAT_LEAPTIMEDOUT 92 | 
|  | #define STAT_LEAPCOMPLETE 93 | 
|  | } StatusRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u16 spacer; | 
|  | u32 vals[100]; | 
|  | } StatsRid; | 
|  |  | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u8 ap[4][ETH_ALEN]; | 
|  | } APListRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | char oui[3]; | 
|  | char zero; | 
|  | u16 prodNum; | 
|  | char manName[32]; | 
|  | char prodName[16]; | 
|  | char prodVer[8]; | 
|  | char factoryAddr[ETH_ALEN]; | 
|  | char aironetAddr[ETH_ALEN]; | 
|  | u16 radioType; | 
|  | u16 country; | 
|  | char callid[ETH_ALEN]; | 
|  | char supportedRates[8]; | 
|  | char rxDiversity; | 
|  | char txDiversity; | 
|  | u16 txPowerLevels[8]; | 
|  | u16 hardVer; | 
|  | u16 hardCap; | 
|  | u16 tempRange; | 
|  | u16 softVer; | 
|  | u16 softSubVer; | 
|  | u16 interfaceVer; | 
|  | u16 softCap; | 
|  | u16 bootBlockVer; | 
|  | u16 requiredHard; | 
|  | u16 extSoftCap; | 
|  | } CapabilityRid; | 
|  |  | 
|  |  | 
|  | /* Only present on firmware >= 5.30.17 */ | 
|  | typedef struct { | 
|  | u16 unknown[4]; | 
|  | u8 fixed[12]; /* WLAN management frame */ | 
|  | u8 iep[624]; | 
|  | } BSSListRidExtra; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u16 index; /* First is 0 and 0xffff means end of list */ | 
|  | #define RADIO_FH 1 /* Frequency hopping radio type */ | 
|  | #define RADIO_DS 2 /* Direct sequence radio type */ | 
|  | #define RADIO_TMA 4 /* Proprietary radio used in old cards (2500) */ | 
|  | u16 radioType; | 
|  | u8 bssid[ETH_ALEN]; /* Mac address of the BSS */ | 
|  | u8 zero; | 
|  | u8 ssidLen; | 
|  | u8 ssid[32]; | 
|  | u16 dBm; | 
|  | #define CAP_ESS (1<<0) | 
|  | #define CAP_IBSS (1<<1) | 
|  | #define CAP_PRIVACY (1<<4) | 
|  | #define CAP_SHORTHDR (1<<5) | 
|  | u16 cap; | 
|  | u16 beaconInterval; | 
|  | u8 rates[8]; /* Same as rates for config rid */ | 
|  | struct { /* For frequency hopping only */ | 
|  | u16 dwell; | 
|  | u8 hopSet; | 
|  | u8 hopPattern; | 
|  | u8 hopIndex; | 
|  | u8 fill; | 
|  | } fh; | 
|  | u16 dsChannel; | 
|  | u16 atimWindow; | 
|  |  | 
|  | /* Only present on firmware >= 5.30.17 */ | 
|  | BSSListRidExtra extra; | 
|  | } BSSListRid; | 
|  |  | 
|  | typedef struct { | 
|  | BSSListRid bss; | 
|  | struct list_head list; | 
|  | } BSSListElement; | 
|  |  | 
|  | typedef struct { | 
|  | u8 rssipct; | 
|  | u8 rssidBm; | 
|  | } tdsRssiEntry; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | tdsRssiEntry x[256]; | 
|  | } tdsRssiRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 len; | 
|  | u16 state; | 
|  | u16 multicastValid; | 
|  | u8  multicast[16]; | 
|  | u16 unicastValid; | 
|  | u8  unicast[16]; | 
|  | } MICRid; | 
|  |  | 
|  | typedef struct { | 
|  | u16 typelen; | 
|  |  | 
|  | union { | 
|  | u8 snap[8]; | 
|  | struct { | 
|  | u8 dsap; | 
|  | u8 ssap; | 
|  | u8 control; | 
|  | u8 orgcode[3]; | 
|  | u8 fieldtype[2]; | 
|  | } llc; | 
|  | } u; | 
|  | u32 mic; | 
|  | u32 seq; | 
|  | } MICBuffer; | 
|  |  | 
|  | typedef struct { | 
|  | u8 da[ETH_ALEN]; | 
|  | u8 sa[ETH_ALEN]; | 
|  | } etherHead; | 
|  |  | 
|  | #pragma pack() | 
|  |  | 
|  | #define TXCTL_TXOK (1<<1) /* report if tx is ok */ | 
|  | #define TXCTL_TXEX (1<<2) /* report if tx fails */ | 
|  | #define TXCTL_802_3 (0<<3) /* 802.3 packet */ | 
|  | #define TXCTL_802_11 (1<<3) /* 802.11 mac packet */ | 
|  | #define TXCTL_ETHERNET (0<<4) /* payload has ethertype */ | 
|  | #define TXCTL_LLC (1<<4) /* payload is llc */ | 
|  | #define TXCTL_RELEASE (0<<5) /* release after completion */ | 
|  | #define TXCTL_NORELEASE (1<<5) /* on completion returns to host */ | 
|  |  | 
|  | #define BUSY_FID 0x10000 | 
|  |  | 
|  | #ifdef CISCO_EXT | 
|  | #define AIROMAGIC	0xa55a | 
|  | /* Warning : SIOCDEVPRIVATE may disapear during 2.5.X - Jean II */ | 
|  | #ifdef SIOCIWFIRSTPRIV | 
|  | #ifdef SIOCDEVPRIVATE | 
|  | #define AIROOLDIOCTL	SIOCDEVPRIVATE | 
|  | #define AIROOLDIDIFC 	AIROOLDIOCTL + 1 | 
|  | #endif /* SIOCDEVPRIVATE */ | 
|  | #else /* SIOCIWFIRSTPRIV */ | 
|  | #define SIOCIWFIRSTPRIV SIOCDEVPRIVATE | 
|  | #endif /* SIOCIWFIRSTPRIV */ | 
|  | /* This may be wrong. When using the new SIOCIWFIRSTPRIV range, we probably | 
|  | * should use only "GET" ioctls (last bit set to 1). "SET" ioctls are root | 
|  | * only and don't return the modified struct ifreq to the application which | 
|  | * is usually a problem. - Jean II */ | 
|  | #define AIROIOCTL	SIOCIWFIRSTPRIV | 
|  | #define AIROIDIFC 	AIROIOCTL + 1 | 
|  |  | 
|  | /* Ioctl constants to be used in airo_ioctl.command */ | 
|  |  | 
|  | #define	AIROGCAP  		0	// Capability rid | 
|  | #define AIROGCFG		1       // USED A LOT | 
|  | #define AIROGSLIST		2	// System ID list | 
|  | #define AIROGVLIST		3       // List of specified AP's | 
|  | #define AIROGDRVNAM		4	//  NOTUSED | 
|  | #define AIROGEHTENC		5	// NOTUSED | 
|  | #define AIROGWEPKTMP		6 | 
|  | #define AIROGWEPKNV		7 | 
|  | #define AIROGSTAT		8 | 
|  | #define AIROGSTATSC32		9 | 
|  | #define AIROGSTATSD32		10 | 
|  | #define AIROGMICRID		11 | 
|  | #define AIROGMICSTATS		12 | 
|  | #define AIROGFLAGS		13 | 
|  | #define AIROGID			14 | 
|  | #define AIRORRID		15 | 
|  | #define AIRORSWVERSION		17 | 
|  |  | 
|  | /* Leave gap of 40 commands after AIROGSTATSD32 for future */ | 
|  |  | 
|  | #define AIROPCAP               	AIROGSTATSD32 + 40 | 
|  | #define AIROPVLIST              AIROPCAP      + 1 | 
|  | #define AIROPSLIST		AIROPVLIST    + 1 | 
|  | #define AIROPCFG		AIROPSLIST    + 1 | 
|  | #define AIROPSIDS		AIROPCFG      + 1 | 
|  | #define AIROPAPLIST		AIROPSIDS     + 1 | 
|  | #define AIROPMACON		AIROPAPLIST   + 1	/* Enable mac  */ | 
|  | #define AIROPMACOFF		AIROPMACON    + 1 	/* Disable mac */ | 
|  | #define AIROPSTCLR		AIROPMACOFF   + 1 | 
|  | #define AIROPWEPKEY		AIROPSTCLR    + 1 | 
|  | #define AIROPWEPKEYNV		AIROPWEPKEY   + 1 | 
|  | #define AIROPLEAPPWD            AIROPWEPKEYNV + 1 | 
|  | #define AIROPLEAPUSR            AIROPLEAPPWD  + 1 | 
|  |  | 
|  | /* Flash codes */ | 
|  |  | 
|  | #define AIROFLSHRST	       AIROPWEPKEYNV  + 40 | 
|  | #define AIROFLSHGCHR           AIROFLSHRST    + 1 | 
|  | #define AIROFLSHSTFL           AIROFLSHGCHR   + 1 | 
|  | #define AIROFLSHPCHR           AIROFLSHSTFL   + 1 | 
|  | #define AIROFLPUTBUF           AIROFLSHPCHR   + 1 | 
|  | #define AIRORESTART            AIROFLPUTBUF   + 1 | 
|  |  | 
|  | #define FLASHSIZE	32768 | 
|  | #define AUXMEMSIZE	(256 * 1024) | 
|  |  | 
|  | typedef struct aironet_ioctl { | 
|  | unsigned short command;		// What to do | 
|  | unsigned short len;		// Len of data | 
|  | unsigned short ridnum;		// rid number | 
|  | unsigned char __user *data;	// d-data | 
|  | } aironet_ioctl; | 
|  |  | 
|  | static char swversion[] = "2.1"; | 
|  | #endif /* CISCO_EXT */ | 
|  |  | 
|  | #define NUM_MODULES       2 | 
|  | #define MIC_MSGLEN_MAX    2400 | 
|  | #define EMMH32_MSGLEN_MAX MIC_MSGLEN_MAX | 
|  | #define AIRO_DEF_MTU      2312 | 
|  |  | 
|  | typedef struct { | 
|  | u32   size;            // size | 
|  | u8    enabled;         // MIC enabled or not | 
|  | u32   rxSuccess;       // successful packets received | 
|  | u32   rxIncorrectMIC;  // pkts dropped due to incorrect MIC comparison | 
|  | u32   rxNotMICed;      // pkts dropped due to not being MIC'd | 
|  | u32   rxMICPlummed;    // pkts dropped due to not having a MIC plummed | 
|  | u32   rxWrongSequence; // pkts dropped due to sequence number violation | 
|  | u32   reserve[32]; | 
|  | } mic_statistics; | 
|  |  | 
|  | typedef struct { | 
|  | u32 coeff[((EMMH32_MSGLEN_MAX)+3)>>2]; | 
|  | u64 accum;	// accumulated mic, reduced to u32 in final() | 
|  | int position;	// current position (byte offset) in message | 
|  | union { | 
|  | u8  d8[4]; | 
|  | u32 d32; | 
|  | } part;	// saves partial message word across update() calls | 
|  | } emmh32_context; | 
|  |  | 
|  | typedef struct { | 
|  | emmh32_context seed;	    // Context - the seed | 
|  | u32		 rx;	    // Received sequence number | 
|  | u32		 tx;	    // Tx sequence number | 
|  | u32		 window;    // Start of window | 
|  | u8		 valid;	    // Flag to say if context is valid or not | 
|  | u8		 key[16]; | 
|  | } miccntx; | 
|  |  | 
|  | typedef struct { | 
|  | miccntx mCtx;		// Multicast context | 
|  | miccntx uCtx;		// Unicast context | 
|  | } mic_module; | 
|  |  | 
|  | typedef struct { | 
|  | unsigned int  rid: 16; | 
|  | unsigned int  len: 15; | 
|  | unsigned int  valid: 1; | 
|  | dma_addr_t host_addr; | 
|  | } Rid; | 
|  |  | 
|  | typedef struct { | 
|  | unsigned int  offset: 15; | 
|  | unsigned int  eoc: 1; | 
|  | unsigned int  len: 15; | 
|  | unsigned int  valid: 1; | 
|  | dma_addr_t host_addr; | 
|  | } TxFid; | 
|  |  | 
|  | typedef struct { | 
|  | unsigned int  ctl: 15; | 
|  | unsigned int  rdy: 1; | 
|  | unsigned int  len: 15; | 
|  | unsigned int  valid: 1; | 
|  | dma_addr_t host_addr; | 
|  | } RxFid; | 
|  |  | 
|  | /* | 
|  | * Host receive descriptor | 
|  | */ | 
|  | typedef struct { | 
|  | unsigned char __iomem *card_ram_off; /* offset into card memory of the | 
|  | desc */ | 
|  | RxFid         rx_desc;		     /* card receive descriptor */ | 
|  | char          *virtual_host_addr;    /* virtual address of host receive | 
|  | buffer */ | 
|  | int           pending; | 
|  | } HostRxDesc; | 
|  |  | 
|  | /* | 
|  | * Host transmit descriptor | 
|  | */ | 
|  | typedef struct { | 
|  | unsigned char __iomem *card_ram_off;	     /* offset into card memory of the | 
|  | desc */ | 
|  | TxFid         tx_desc;		     /* card transmit descriptor */ | 
|  | char          *virtual_host_addr;    /* virtual address of host receive | 
|  | buffer */ | 
|  | int           pending; | 
|  | } HostTxDesc; | 
|  |  | 
|  | /* | 
|  | * Host RID descriptor | 
|  | */ | 
|  | typedef struct { | 
|  | unsigned char __iomem *card_ram_off;      /* offset into card memory of the | 
|  | descriptor */ | 
|  | Rid           rid_desc;		  /* card RID descriptor */ | 
|  | char          *virtual_host_addr; /* virtual address of host receive | 
|  | buffer */ | 
|  | } HostRidDesc; | 
|  |  | 
|  | typedef struct { | 
|  | u16 sw0; | 
|  | u16 sw1; | 
|  | u16 status; | 
|  | u16 len; | 
|  | #define HOST_SET (1 << 0) | 
|  | #define HOST_INT_TX (1 << 1) /* Interrupt on successful TX */ | 
|  | #define HOST_INT_TXERR (1 << 2) /* Interrupt on unseccessful TX */ | 
|  | #define HOST_LCC_PAYLOAD (1 << 4) /* LLC payload, 0 = Ethertype */ | 
|  | #define HOST_DONT_RLSE (1 << 5) /* Don't release buffer when done */ | 
|  | #define HOST_DONT_RETRY (1 << 6) /* Don't retry trasmit */ | 
|  | #define HOST_CLR_AID (1 << 7) /* clear AID failure */ | 
|  | #define HOST_RTS (1 << 9) /* Force RTS use */ | 
|  | #define HOST_SHORT (1 << 10) /* Do short preamble */ | 
|  | u16 ctl; | 
|  | u16 aid; | 
|  | u16 retries; | 
|  | u16 fill; | 
|  | } TxCtlHdr; | 
|  |  | 
|  | typedef struct { | 
|  | u16 ctl; | 
|  | u16 duration; | 
|  | char addr1[6]; | 
|  | char addr2[6]; | 
|  | char addr3[6]; | 
|  | u16 seq; | 
|  | char addr4[6]; | 
|  | } WifiHdr; | 
|  |  | 
|  |  | 
|  | typedef struct { | 
|  | TxCtlHdr ctlhdr; | 
|  | u16 fill1; | 
|  | u16 fill2; | 
|  | WifiHdr wifihdr; | 
|  | u16 gaplen; | 
|  | u16 status; | 
|  | } WifiCtlHdr; | 
|  |  | 
|  | static WifiCtlHdr wifictlhdr8023 = { | 
|  | .ctlhdr = { | 
|  | .ctl	= HOST_DONT_RLSE, | 
|  | } | 
|  | }; | 
|  |  | 
|  | // Frequency list (map channels to frequencies) | 
|  | static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, | 
|  | 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; | 
|  |  | 
|  | // A few details needed for WEP (Wireless Equivalent Privacy) | 
|  | #define MAX_KEY_SIZE 13			// 128 (?) bits | 
|  | #define MIN_KEY_SIZE  5			// 40 bits RC4 - WEP | 
|  | typedef struct wep_key_t { | 
|  | u16	len; | 
|  | u8	key[16];	/* 40-bit and 104-bit keys */ | 
|  | } wep_key_t; | 
|  |  | 
|  | /* Backward compatibility */ | 
|  | #ifndef IW_ENCODE_NOKEY | 
|  | #define IW_ENCODE_NOKEY         0x0800  /* Key is write only, so not present */ | 
|  | #define IW_ENCODE_MODE  (IW_ENCODE_DISABLED | IW_ENCODE_RESTRICTED | IW_ENCODE_OPEN) | 
|  | #endif /* IW_ENCODE_NOKEY */ | 
|  |  | 
|  | /* List of Wireless Handlers (new API) */ | 
|  | static const struct iw_handler_def	airo_handler_def; | 
|  |  | 
|  | static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)"; | 
|  |  | 
|  | struct airo_info; | 
|  |  | 
|  | static int get_dec_u16( char *buffer, int *start, int limit ); | 
|  | static void OUT4500( struct airo_info *, u16 register, u16 value ); | 
|  | static unsigned short IN4500( struct airo_info *, u16 register ); | 
|  | static u16 setup_card(struct airo_info*, u8 *mac, int lock); | 
|  | static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock ); | 
|  | static void disable_MAC(struct airo_info *ai, int lock); | 
|  | static void enable_interrupts(struct airo_info*); | 
|  | static void disable_interrupts(struct airo_info*); | 
|  | static u16 issuecommand(struct airo_info*, Cmd *pCmd, Resp *pRsp); | 
|  | static int bap_setup(struct airo_info*, u16 rid, u16 offset, int whichbap); | 
|  | static int aux_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen, | 
|  | int whichbap); | 
|  | static int fast_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen, | 
|  | int whichbap); | 
|  | static int bap_write(struct airo_info*, const u16 *pu16Src, int bytelen, | 
|  | int whichbap); | 
|  | static int PC4500_accessrid(struct airo_info*, u16 rid, u16 accmd); | 
|  | static int PC4500_readrid(struct airo_info*, u16 rid, void *pBuf, int len, int lock); | 
|  | static int PC4500_writerid(struct airo_info*, u16 rid, const void | 
|  | *pBuf, int len, int lock); | 
|  | static int do_writerid( struct airo_info*, u16 rid, const void *rid_data, | 
|  | int len, int dummy ); | 
|  | static u16 transmit_allocate(struct airo_info*, int lenPayload, int raw); | 
|  | static int transmit_802_3_packet(struct airo_info*, int len, char *pPacket); | 
|  | static int transmit_802_11_packet(struct airo_info*, int len, char *pPacket); | 
|  |  | 
|  | static int mpi_send_packet (struct net_device *dev); | 
|  | static void mpi_unmap_card(struct pci_dev *pci); | 
|  | static void mpi_receive_802_3(struct airo_info *ai); | 
|  | static void mpi_receive_802_11(struct airo_info *ai); | 
|  | static int waitbusy (struct airo_info *ai); | 
|  |  | 
|  | static irqreturn_t airo_interrupt( int irq, void* dev_id, struct pt_regs | 
|  | *regs); | 
|  | static int airo_thread(void *data); | 
|  | static void timer_func( struct net_device *dev ); | 
|  | static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | 
|  | static struct iw_statistics *airo_get_wireless_stats (struct net_device *dev); | 
|  | static void airo_read_wireless_stats (struct airo_info *local); | 
|  | #ifdef CISCO_EXT | 
|  | static int readrids(struct net_device *dev, aironet_ioctl *comp); | 
|  | static int writerids(struct net_device *dev, aironet_ioctl *comp); | 
|  | static int flashcard(struct net_device *dev, aironet_ioctl *comp); | 
|  | #endif /* CISCO_EXT */ | 
|  | static void micinit(struct airo_info *ai); | 
|  | static int micsetup(struct airo_info *ai); | 
|  | static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len); | 
|  | static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen); | 
|  |  | 
|  | static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi); | 
|  | static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm); | 
|  |  | 
|  | static void airo_networks_free(struct airo_info *ai); | 
|  |  | 
|  | struct airo_info { | 
|  | struct net_device_stats	stats; | 
|  | struct net_device             *dev; | 
|  | /* Note, we can have MAX_FIDS outstanding.  FIDs are 16-bits, so we | 
|  | use the high bit to mark whether it is in use. */ | 
|  | #define MAX_FIDS 6 | 
|  | #define MPI_MAX_FIDS 1 | 
|  | int                           fids[MAX_FIDS]; | 
|  | ConfigRid config; | 
|  | char keyindex; // Used with auto wep | 
|  | char defindex; // Used with auto wep | 
|  | struct proc_dir_entry *proc_entry; | 
|  | spinlock_t aux_lock; | 
|  | #define FLAG_RADIO_OFF	0	/* User disabling of MAC */ | 
|  | #define FLAG_RADIO_DOWN	1	/* ifup/ifdown disabling of MAC */ | 
|  | #define FLAG_RADIO_MASK 0x03 | 
|  | #define FLAG_ENABLED	2 | 
|  | #define FLAG_ADHOC	3	/* Needed by MIC */ | 
|  | #define FLAG_MIC_CAPABLE 4 | 
|  | #define FLAG_UPDATE_MULTI 5 | 
|  | #define FLAG_UPDATE_UNI 6 | 
|  | #define FLAG_802_11	7 | 
|  | #define FLAG_PROMISC	8	/* IFF_PROMISC 0x100 - include/linux/if.h */ | 
|  | #define FLAG_PENDING_XMIT 9 | 
|  | #define FLAG_PENDING_XMIT11 10 | 
|  | #define FLAG_MPI	11 | 
|  | #define FLAG_REGISTERED	12 | 
|  | #define FLAG_COMMIT	13 | 
|  | #define FLAG_RESET	14 | 
|  | #define FLAG_FLASHING	15 | 
|  | #define FLAG_WPA_CAPABLE	16 | 
|  | unsigned long flags; | 
|  | #define JOB_DIE	0 | 
|  | #define JOB_XMIT	1 | 
|  | #define JOB_XMIT11	2 | 
|  | #define JOB_STATS	3 | 
|  | #define JOB_PROMISC	4 | 
|  | #define JOB_MIC	5 | 
|  | #define JOB_EVENT	6 | 
|  | #define JOB_AUTOWEP	7 | 
|  | #define JOB_WSTATS	8 | 
|  | #define JOB_SCAN_RESULTS  9 | 
|  | unsigned long jobs; | 
|  | int (*bap_read)(struct airo_info*, u16 *pu16Dst, int bytelen, | 
|  | int whichbap); | 
|  | unsigned short *flash; | 
|  | tdsRssiEntry *rssi; | 
|  | struct task_struct *task; | 
|  | struct semaphore sem; | 
|  | pid_t thr_pid; | 
|  | wait_queue_head_t thr_wait; | 
|  | struct completion thr_exited; | 
|  | unsigned long expires; | 
|  | struct { | 
|  | struct sk_buff *skb; | 
|  | int fid; | 
|  | } xmit, xmit11; | 
|  | struct net_device *wifidev; | 
|  | struct iw_statistics	wstats;		// wireless stats | 
|  | unsigned long		scan_timeout;	/* Time scan should be read */ | 
|  | struct iw_spy_data	spy_data; | 
|  | struct iw_public_data	wireless_data; | 
|  | /* MIC stuff */ | 
|  | struct crypto_tfm	*tfm; | 
|  | mic_module		mod[2]; | 
|  | mic_statistics		micstats; | 
|  | HostRxDesc rxfids[MPI_MAX_FIDS]; // rx/tx/config MPI350 descriptors | 
|  | HostTxDesc txfids[MPI_MAX_FIDS]; | 
|  | HostRidDesc config_desc; | 
|  | unsigned long ridbus; // phys addr of config_desc | 
|  | struct sk_buff_head txq;// tx queue used by mpi350 code | 
|  | struct pci_dev          *pci; | 
|  | unsigned char		__iomem *pcimem; | 
|  | unsigned char		__iomem *pciaux; | 
|  | unsigned char		*shared; | 
|  | dma_addr_t		shared_dma; | 
|  | pm_message_t		power; | 
|  | SsidRid			*SSID; | 
|  | APListRid		*APList; | 
|  | #define	PCI_SHARED_LEN		2*MPI_MAX_FIDS*PKTSIZE+RIDSIZE | 
|  | char			proc_name[IFNAMSIZ]; | 
|  |  | 
|  | /* WPA-related stuff */ | 
|  | unsigned int bssListFirst; | 
|  | unsigned int bssListNext; | 
|  | unsigned int bssListRidLen; | 
|  |  | 
|  | struct list_head network_list; | 
|  | struct list_head network_free_list; | 
|  | BSSListElement *networks; | 
|  | }; | 
|  |  | 
|  | static inline int bap_read(struct airo_info *ai, u16 *pu16Dst, int bytelen, | 
|  | int whichbap) { | 
|  | return ai->bap_read(ai, pu16Dst, bytelen, whichbap); | 
|  | } | 
|  |  | 
|  | static int setup_proc_entry( struct net_device *dev, | 
|  | struct airo_info *apriv ); | 
|  | static int takedown_proc_entry( struct net_device *dev, | 
|  | struct airo_info *apriv ); | 
|  |  | 
|  | static int cmdreset(struct airo_info *ai); | 
|  | static int setflashmode (struct airo_info *ai); | 
|  | static int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime); | 
|  | static int flashputbuf(struct airo_info *ai); | 
|  | static int flashrestart(struct airo_info *ai,struct net_device *dev); | 
|  |  | 
|  | #define airo_print(type, name, fmt, args...) \ | 
|  | { printk(type "airo(%s): " fmt "\n", name, ##args); } | 
|  |  | 
|  | #define airo_print_info(name, fmt, args...) \ | 
|  | airo_print(KERN_INFO, name, fmt, ##args) | 
|  |  | 
|  | #define airo_print_dbg(name, fmt, args...) \ | 
|  | airo_print(KERN_DEBUG, name, fmt, ##args) | 
|  |  | 
|  | #define airo_print_warn(name, fmt, args...) \ | 
|  | airo_print(KERN_WARNING, name, fmt, ##args) | 
|  |  | 
|  | #define airo_print_err(name, fmt, args...) \ | 
|  | airo_print(KERN_ERR, name, fmt, ##args) | 
|  |  | 
|  |  | 
|  | /*********************************************************************** | 
|  | *                              MIC ROUTINES                           * | 
|  | *********************************************************************** | 
|  | */ | 
|  |  | 
|  | static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq); | 
|  | static void MoveWindow(miccntx *context, u32 micSeq); | 
|  | static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *); | 
|  | static void emmh32_init(emmh32_context *context); | 
|  | static void emmh32_update(emmh32_context *context, u8 *pOctets, int len); | 
|  | static void emmh32_final(emmh32_context *context, u8 digest[4]); | 
|  | static int flashpchar(struct airo_info *ai,int byte,int dwelltime); | 
|  |  | 
|  | /* micinit - Initialize mic seed */ | 
|  |  | 
|  | static void micinit(struct airo_info *ai) | 
|  | { | 
|  | MICRid mic_rid; | 
|  |  | 
|  | clear_bit(JOB_MIC, &ai->jobs); | 
|  | PC4500_readrid(ai, RID_MIC, &mic_rid, sizeof(mic_rid), 0); | 
|  | up(&ai->sem); | 
|  |  | 
|  | ai->micstats.enabled = (mic_rid.state & 0x00FF) ? 1 : 0; | 
|  |  | 
|  | if (ai->micstats.enabled) { | 
|  | /* Key must be valid and different */ | 
|  | if (mic_rid.multicastValid && (!ai->mod[0].mCtx.valid || | 
|  | (memcmp (ai->mod[0].mCtx.key, mic_rid.multicast, | 
|  | sizeof(ai->mod[0].mCtx.key)) != 0))) { | 
|  | /* Age current mic Context */ | 
|  | memcpy(&ai->mod[1].mCtx,&ai->mod[0].mCtx,sizeof(miccntx)); | 
|  | /* Initialize new context */ | 
|  | memcpy(&ai->mod[0].mCtx.key,mic_rid.multicast,sizeof(mic_rid.multicast)); | 
|  | ai->mod[0].mCtx.window  = 33; //Window always points to the middle | 
|  | ai->mod[0].mCtx.rx      = 0;  //Rx Sequence numbers | 
|  | ai->mod[0].mCtx.tx      = 0;  //Tx sequence numbers | 
|  | ai->mod[0].mCtx.valid   = 1;  //Key is now valid | 
|  |  | 
|  | /* Give key to mic seed */ | 
|  | emmh32_setseed(&ai->mod[0].mCtx.seed,mic_rid.multicast,sizeof(mic_rid.multicast), ai->tfm); | 
|  | } | 
|  |  | 
|  | /* Key must be valid and different */ | 
|  | if (mic_rid.unicastValid && (!ai->mod[0].uCtx.valid || | 
|  | (memcmp(ai->mod[0].uCtx.key, mic_rid.unicast, | 
|  | sizeof(ai->mod[0].uCtx.key)) != 0))) { | 
|  | /* Age current mic Context */ | 
|  | memcpy(&ai->mod[1].uCtx,&ai->mod[0].uCtx,sizeof(miccntx)); | 
|  | /* Initialize new context */ | 
|  | memcpy(&ai->mod[0].uCtx.key,mic_rid.unicast,sizeof(mic_rid.unicast)); | 
|  |  | 
|  | ai->mod[0].uCtx.window  = 33; //Window always points to the middle | 
|  | ai->mod[0].uCtx.rx      = 0;  //Rx Sequence numbers | 
|  | ai->mod[0].uCtx.tx      = 0;  //Tx sequence numbers | 
|  | ai->mod[0].uCtx.valid   = 1;  //Key is now valid | 
|  |  | 
|  | //Give key to mic seed | 
|  | emmh32_setseed(&ai->mod[0].uCtx.seed, mic_rid.unicast, sizeof(mic_rid.unicast), ai->tfm); | 
|  | } | 
|  | } else { | 
|  | /* So next time we have a valid key and mic is enabled, we will update | 
|  | * the sequence number if the key is the same as before. | 
|  | */ | 
|  | ai->mod[0].uCtx.valid = 0; | 
|  | ai->mod[0].mCtx.valid = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* micsetup - Get ready for business */ | 
|  |  | 
|  | static int micsetup(struct airo_info *ai) { | 
|  | int i; | 
|  |  | 
|  | if (ai->tfm == NULL) | 
|  | ai->tfm = crypto_alloc_tfm("aes", CRYPTO_TFM_REQ_MAY_SLEEP); | 
|  |  | 
|  | if (ai->tfm == NULL) { | 
|  | airo_print_err(ai->dev->name, "failed to load transform for AES"); | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | for (i=0; i < NUM_MODULES; i++) { | 
|  | memset(&ai->mod[i].mCtx,0,sizeof(miccntx)); | 
|  | memset(&ai->mod[i].uCtx,0,sizeof(miccntx)); | 
|  | } | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static char micsnap[] = {0xAA,0xAA,0x03,0x00,0x40,0x96,0x00,0x02}; | 
|  |  | 
|  | /*=========================================================================== | 
|  | * Description: Mic a packet | 
|  | * | 
|  | *      Inputs: etherHead * pointer to an 802.3 frame | 
|  | * | 
|  | *     Returns: BOOLEAN if successful, otherwise false. | 
|  | *             PacketTxLen will be updated with the mic'd packets size. | 
|  | * | 
|  | *    Caveats: It is assumed that the frame buffer will already | 
|  | *             be big enough to hold the largets mic message possible. | 
|  | *            (No memory allocation is done here). | 
|  | * | 
|  | *    Author: sbraneky (10/15/01) | 
|  | *    Merciless hacks by rwilcher (1/14/02) | 
|  | */ | 
|  |  | 
|  | static int encapsulate(struct airo_info *ai ,etherHead *frame, MICBuffer *mic, int payLen) | 
|  | { | 
|  | miccntx   *context; | 
|  |  | 
|  | // Determine correct context | 
|  | // If not adhoc, always use unicast key | 
|  |  | 
|  | if (test_bit(FLAG_ADHOC, &ai->flags) && (frame->da[0] & 0x1)) | 
|  | context = &ai->mod[0].mCtx; | 
|  | else | 
|  | context = &ai->mod[0].uCtx; | 
|  |  | 
|  | if (!context->valid) | 
|  | return ERROR; | 
|  |  | 
|  | mic->typelen = htons(payLen + 16); //Length of Mic'd packet | 
|  |  | 
|  | memcpy(&mic->u.snap, micsnap, sizeof(micsnap)); // Add Snap | 
|  |  | 
|  | // Add Tx sequence | 
|  | mic->seq = htonl(context->tx); | 
|  | context->tx += 2; | 
|  |  | 
|  | emmh32_init(&context->seed); // Mic the packet | 
|  | emmh32_update(&context->seed,frame->da,ETH_ALEN * 2); // DA,SA | 
|  | emmh32_update(&context->seed,(u8*)&mic->typelen,10); // Type/Length and Snap | 
|  | emmh32_update(&context->seed,(u8*)&mic->seq,sizeof(mic->seq)); //SEQ | 
|  | emmh32_update(&context->seed,frame->da + ETH_ALEN * 2,payLen); //payload | 
|  | emmh32_final(&context->seed, (u8*)&mic->mic); | 
|  |  | 
|  | /*    New Type/length ?????????? */ | 
|  | mic->typelen = 0; //Let NIC know it could be an oversized packet | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | typedef enum { | 
|  | NONE, | 
|  | NOMIC, | 
|  | NOMICPLUMMED, | 
|  | SEQUENCE, | 
|  | INCORRECTMIC, | 
|  | } mic_error; | 
|  |  | 
|  | /*=========================================================================== | 
|  | *  Description: Decapsulates a MIC'd packet and returns the 802.3 packet | 
|  | *               (removes the MIC stuff) if packet is a valid packet. | 
|  | * | 
|  | *       Inputs: etherHead  pointer to the 802.3 packet | 
|  | * | 
|  | *      Returns: BOOLEAN - TRUE if packet should be dropped otherwise FALSE | 
|  | * | 
|  | *      Author: sbraneky (10/15/01) | 
|  | *    Merciless hacks by rwilcher (1/14/02) | 
|  | *--------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *eth, u16 payLen) | 
|  | { | 
|  | int      i; | 
|  | u32      micSEQ; | 
|  | miccntx  *context; | 
|  | u8       digest[4]; | 
|  | mic_error micError = NONE; | 
|  |  | 
|  | // Check if the packet is a Mic'd packet | 
|  |  | 
|  | if (!ai->micstats.enabled) { | 
|  | //No Mic set or Mic OFF but we received a MIC'd packet. | 
|  | if (memcmp ((u8*)eth + 14, micsnap, sizeof(micsnap)) == 0) { | 
|  | ai->micstats.rxMICPlummed++; | 
|  | return ERROR; | 
|  | } | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | if (ntohs(mic->typelen) == 0x888E) | 
|  | return SUCCESS; | 
|  |  | 
|  | if (memcmp (mic->u.snap, micsnap, sizeof(micsnap)) != 0) { | 
|  | // Mic enabled but packet isn't Mic'd | 
|  | ai->micstats.rxMICPlummed++; | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | micSEQ = ntohl(mic->seq);            //store SEQ as CPU order | 
|  |  | 
|  | //At this point we a have a mic'd packet and mic is enabled | 
|  | //Now do the mic error checking. | 
|  |  | 
|  | //Receive seq must be odd | 
|  | if ( (micSEQ & 1) == 0 ) { | 
|  | ai->micstats.rxWrongSequence++; | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < NUM_MODULES; i++) { | 
|  | int mcast = eth->da[0] & 1; | 
|  | //Determine proper context | 
|  | context = mcast ? &ai->mod[i].mCtx : &ai->mod[i].uCtx; | 
|  |  | 
|  | //Make sure context is valid | 
|  | if (!context->valid) { | 
|  | if (i == 0) | 
|  | micError = NOMICPLUMMED; | 
|  | continue; | 
|  | } | 
|  | //DeMic it | 
|  |  | 
|  | if (!mic->typelen) | 
|  | mic->typelen = htons(payLen + sizeof(MICBuffer) - 2); | 
|  |  | 
|  | emmh32_init(&context->seed); | 
|  | emmh32_update(&context->seed, eth->da, ETH_ALEN*2); | 
|  | emmh32_update(&context->seed, (u8 *)&mic->typelen, sizeof(mic->typelen)+sizeof(mic->u.snap)); | 
|  | emmh32_update(&context->seed, (u8 *)&mic->seq,sizeof(mic->seq)); | 
|  | emmh32_update(&context->seed, eth->da + ETH_ALEN*2,payLen); | 
|  | //Calculate MIC | 
|  | emmh32_final(&context->seed, digest); | 
|  |  | 
|  | if (memcmp(digest, &mic->mic, 4)) { //Make sure the mics match | 
|  | //Invalid Mic | 
|  | if (i == 0) | 
|  | micError = INCORRECTMIC; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | //Check Sequence number if mics pass | 
|  | if (RxSeqValid(ai, context, mcast, micSEQ) == SUCCESS) { | 
|  | ai->micstats.rxSuccess++; | 
|  | return SUCCESS; | 
|  | } | 
|  | if (i == 0) | 
|  | micError = SEQUENCE; | 
|  | } | 
|  |  | 
|  | // Update statistics | 
|  | switch (micError) { | 
|  | case NOMICPLUMMED: ai->micstats.rxMICPlummed++;   break; | 
|  | case SEQUENCE:    ai->micstats.rxWrongSequence++; break; | 
|  | case INCORRECTMIC: ai->micstats.rxIncorrectMIC++; break; | 
|  | case NONE:  break; | 
|  | case NOMIC: break; | 
|  | } | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | /*=========================================================================== | 
|  | * Description:  Checks the Rx Seq number to make sure it is valid | 
|  | *               and hasn't already been received | 
|  | * | 
|  | *     Inputs: miccntx - mic context to check seq against | 
|  | *             micSeq  - the Mic seq number | 
|  | * | 
|  | *    Returns: TRUE if valid otherwise FALSE. | 
|  | * | 
|  | *    Author: sbraneky (10/15/01) | 
|  | *    Merciless hacks by rwilcher (1/14/02) | 
|  | *--------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq) | 
|  | { | 
|  | u32 seq,index; | 
|  |  | 
|  | //Allow for the ap being rebooted - if it is then use the next | 
|  | //sequence number of the current sequence number - might go backwards | 
|  |  | 
|  | if (mcast) { | 
|  | if (test_bit(FLAG_UPDATE_MULTI, &ai->flags)) { | 
|  | clear_bit (FLAG_UPDATE_MULTI, &ai->flags); | 
|  | context->window = (micSeq > 33) ? micSeq : 33; | 
|  | context->rx     = 0;        // Reset rx | 
|  | } | 
|  | } else if (test_bit(FLAG_UPDATE_UNI, &ai->flags)) { | 
|  | clear_bit (FLAG_UPDATE_UNI, &ai->flags); | 
|  | context->window = (micSeq > 33) ? micSeq : 33; // Move window | 
|  | context->rx     = 0;        // Reset rx | 
|  | } | 
|  |  | 
|  | //Make sequence number relative to START of window | 
|  | seq = micSeq - (context->window - 33); | 
|  |  | 
|  | //Too old of a SEQ number to check. | 
|  | if ((s32)seq < 0) | 
|  | return ERROR; | 
|  |  | 
|  | if ( seq > 64 ) { | 
|  | //Window is infinite forward | 
|  | MoveWindow(context,micSeq); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | // We are in the window. Now check the context rx bit to see if it was already sent | 
|  | seq >>= 1;         //divide by 2 because we only have odd numbers | 
|  | index = 1 << seq;  //Get an index number | 
|  |  | 
|  | if (!(context->rx & index)) { | 
|  | //micSEQ falls inside the window. | 
|  | //Add seqence number to the list of received numbers. | 
|  | context->rx |= index; | 
|  |  | 
|  | MoveWindow(context,micSeq); | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | static void MoveWindow(miccntx *context, u32 micSeq) | 
|  | { | 
|  | u32 shift; | 
|  |  | 
|  | //Move window if seq greater than the middle of the window | 
|  | if (micSeq > context->window) { | 
|  | shift = (micSeq - context->window) >> 1; | 
|  |  | 
|  | //Shift out old | 
|  | if (shift < 32) | 
|  | context->rx >>= shift; | 
|  | else | 
|  | context->rx = 0; | 
|  |  | 
|  | context->window = micSeq;      //Move window | 
|  | } | 
|  | } | 
|  |  | 
|  | /*==============================================*/ | 
|  | /*========== EMMH ROUTINES  ====================*/ | 
|  | /*==============================================*/ | 
|  |  | 
|  | /* mic accumulate */ | 
|  | #define MIC_ACCUM(val)	\ | 
|  | context->accum += (u64)(val) * context->coeff[coeff_position++]; | 
|  |  | 
|  | static unsigned char aes_counter[16]; | 
|  |  | 
|  | /* expand the key to fill the MMH coefficient array */ | 
|  | static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *tfm) | 
|  | { | 
|  | /* take the keying material, expand if necessary, truncate at 16-bytes */ | 
|  | /* run through AES counter mode to generate context->coeff[] */ | 
|  |  | 
|  | int i,j; | 
|  | u32 counter; | 
|  | u8 *cipher, plain[16]; | 
|  | struct scatterlist sg[1]; | 
|  |  | 
|  | crypto_cipher_setkey(tfm, pkey, 16); | 
|  | counter = 0; | 
|  | for (i = 0; i < (sizeof(context->coeff)/sizeof(context->coeff[0])); ) { | 
|  | aes_counter[15] = (u8)(counter >> 0); | 
|  | aes_counter[14] = (u8)(counter >> 8); | 
|  | aes_counter[13] = (u8)(counter >> 16); | 
|  | aes_counter[12] = (u8)(counter >> 24); | 
|  | counter++; | 
|  | memcpy (plain, aes_counter, 16); | 
|  | sg_set_buf(sg, plain, 16); | 
|  | crypto_cipher_encrypt(tfm, sg, sg, 16); | 
|  | cipher = kmap(sg->page) + sg->offset; | 
|  | for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) { | 
|  | context->coeff[i++] = ntohl(*(u32 *)&cipher[j]); | 
|  | j += 4; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* prepare for calculation of a new mic */ | 
|  | static void emmh32_init(emmh32_context *context) | 
|  | { | 
|  | /* prepare for new mic calculation */ | 
|  | context->accum = 0; | 
|  | context->position = 0; | 
|  | } | 
|  |  | 
|  | /* add some bytes to the mic calculation */ | 
|  | static void emmh32_update(emmh32_context *context, u8 *pOctets, int len) | 
|  | { | 
|  | int	coeff_position, byte_position; | 
|  |  | 
|  | if (len == 0) return; | 
|  |  | 
|  | coeff_position = context->position >> 2; | 
|  |  | 
|  | /* deal with partial 32-bit word left over from last update */ | 
|  | byte_position = context->position & 3; | 
|  | if (byte_position) { | 
|  | /* have a partial word in part to deal with */ | 
|  | do { | 
|  | if (len == 0) return; | 
|  | context->part.d8[byte_position++] = *pOctets++; | 
|  | context->position++; | 
|  | len--; | 
|  | } while (byte_position < 4); | 
|  | MIC_ACCUM(htonl(context->part.d32)); | 
|  | } | 
|  |  | 
|  | /* deal with full 32-bit words */ | 
|  | while (len >= 4) { | 
|  | MIC_ACCUM(htonl(*(u32 *)pOctets)); | 
|  | context->position += 4; | 
|  | pOctets += 4; | 
|  | len -= 4; | 
|  | } | 
|  |  | 
|  | /* deal with partial 32-bit word that will be left over from this update */ | 
|  | byte_position = 0; | 
|  | while (len > 0) { | 
|  | context->part.d8[byte_position++] = *pOctets++; | 
|  | context->position++; | 
|  | len--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* mask used to zero empty bytes for final partial word */ | 
|  | static u32 mask32[4] = { 0x00000000L, 0xFF000000L, 0xFFFF0000L, 0xFFFFFF00L }; | 
|  |  | 
|  | /* calculate the mic */ | 
|  | static void emmh32_final(emmh32_context *context, u8 digest[4]) | 
|  | { | 
|  | int	coeff_position, byte_position; | 
|  | u32	val; | 
|  |  | 
|  | u64 sum, utmp; | 
|  | s64 stmp; | 
|  |  | 
|  | coeff_position = context->position >> 2; | 
|  |  | 
|  | /* deal with partial 32-bit word left over from last update */ | 
|  | byte_position = context->position & 3; | 
|  | if (byte_position) { | 
|  | /* have a partial word in part to deal with */ | 
|  | val = htonl(context->part.d32); | 
|  | MIC_ACCUM(val & mask32[byte_position]);	/* zero empty bytes */ | 
|  | } | 
|  |  | 
|  | /* reduce the accumulated u64 to a 32-bit MIC */ | 
|  | sum = context->accum; | 
|  | stmp = (sum  & 0xffffffffLL) - ((sum >> 32)  * 15); | 
|  | utmp = (stmp & 0xffffffffLL) - ((stmp >> 32) * 15); | 
|  | sum = utmp & 0xffffffffLL; | 
|  | if (utmp > 0x10000000fLL) | 
|  | sum -= 15; | 
|  |  | 
|  | val = (u32)sum; | 
|  | digest[0] = (val>>24) & 0xFF; | 
|  | digest[1] = (val>>16) & 0xFF; | 
|  | digest[2] = (val>>8) & 0xFF; | 
|  | digest[3] = val & 0xFF; | 
|  | } | 
|  |  | 
|  | static int readBSSListRid(struct airo_info *ai, int first, | 
|  | BSSListRid *list) { | 
|  | int rc; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | if (first == 1) { | 
|  | if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN; | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd=CMD_LISTBSS; | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return -ERESTARTSYS; | 
|  | issuecommand(ai, &cmd, &rsp); | 
|  | up(&ai->sem); | 
|  | /* Let the command take effect */ | 
|  | ai->task = current; | 
|  | ssleep(3); | 
|  | ai->task = NULL; | 
|  | } | 
|  | rc = PC4500_readrid(ai, first ? ai->bssListFirst : ai->bssListNext, | 
|  | list, ai->bssListRidLen, 1); | 
|  |  | 
|  | list->len = le16_to_cpu(list->len); | 
|  | list->index = le16_to_cpu(list->index); | 
|  | list->radioType = le16_to_cpu(list->radioType); | 
|  | list->cap = le16_to_cpu(list->cap); | 
|  | list->beaconInterval = le16_to_cpu(list->beaconInterval); | 
|  | list->fh.dwell = le16_to_cpu(list->fh.dwell); | 
|  | list->dsChannel = le16_to_cpu(list->dsChannel); | 
|  | list->atimWindow = le16_to_cpu(list->atimWindow); | 
|  | list->dBm = le16_to_cpu(list->dBm); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int readWepKeyRid(struct airo_info*ai, WepKeyRid *wkr, int temp, int lock) { | 
|  | int rc = PC4500_readrid(ai, temp ? RID_WEP_TEMP : RID_WEP_PERM, | 
|  | wkr, sizeof(*wkr), lock); | 
|  |  | 
|  | wkr->len = le16_to_cpu(wkr->len); | 
|  | wkr->kindex = le16_to_cpu(wkr->kindex); | 
|  | wkr->klen = le16_to_cpu(wkr->klen); | 
|  | return rc; | 
|  | } | 
|  | /* In the writeXXXRid routines we copy the rids so that we don't screwup | 
|  | * the originals when we endian them... */ | 
|  | static int writeWepKeyRid(struct airo_info*ai, WepKeyRid *pwkr, int perm, int lock) { | 
|  | int rc; | 
|  | WepKeyRid wkr = *pwkr; | 
|  |  | 
|  | wkr.len = cpu_to_le16(wkr.len); | 
|  | wkr.kindex = cpu_to_le16(wkr.kindex); | 
|  | wkr.klen = cpu_to_le16(wkr.klen); | 
|  | rc = PC4500_writerid(ai, RID_WEP_TEMP, &wkr, sizeof(wkr), lock); | 
|  | if (rc!=SUCCESS) airo_print_err(ai->dev->name, "WEP_TEMP set %x", rc); | 
|  | if (perm) { | 
|  | rc = PC4500_writerid(ai, RID_WEP_PERM, &wkr, sizeof(wkr), lock); | 
|  | if (rc!=SUCCESS) { | 
|  | airo_print_err(ai->dev->name, "WEP_PERM set %x", rc); | 
|  | } | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int readSsidRid(struct airo_info*ai, SsidRid *ssidr) { | 
|  | int i; | 
|  | int rc = PC4500_readrid(ai, RID_SSID, ssidr, sizeof(*ssidr), 1); | 
|  |  | 
|  | ssidr->len = le16_to_cpu(ssidr->len); | 
|  | for(i = 0; i < 3; i++) { | 
|  | ssidr->ssids[i].len = le16_to_cpu(ssidr->ssids[i].len); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  | static int writeSsidRid(struct airo_info*ai, SsidRid *pssidr, int lock) { | 
|  | int rc; | 
|  | int i; | 
|  | SsidRid ssidr = *pssidr; | 
|  |  | 
|  | ssidr.len = cpu_to_le16(ssidr.len); | 
|  | for(i = 0; i < 3; i++) { | 
|  | ssidr.ssids[i].len = cpu_to_le16(ssidr.ssids[i].len); | 
|  | } | 
|  | rc = PC4500_writerid(ai, RID_SSID, &ssidr, sizeof(ssidr), lock); | 
|  | return rc; | 
|  | } | 
|  | static int readConfigRid(struct airo_info*ai, int lock) { | 
|  | int rc; | 
|  | u16 *s; | 
|  | ConfigRid cfg; | 
|  |  | 
|  | if (ai->config.len) | 
|  | return SUCCESS; | 
|  |  | 
|  | rc = PC4500_readrid(ai, RID_ACTUALCONFIG, &cfg, sizeof(cfg), lock); | 
|  | if (rc != SUCCESS) | 
|  | return rc; | 
|  |  | 
|  | for(s = &cfg.len; s <= &cfg.rtsThres; s++) *s = le16_to_cpu(*s); | 
|  |  | 
|  | for(s = &cfg.shortRetryLimit; s <= &cfg.radioType; s++) | 
|  | *s = le16_to_cpu(*s); | 
|  |  | 
|  | for(s = &cfg.txPower; s <= &cfg.radioSpecific; s++) | 
|  | *s = le16_to_cpu(*s); | 
|  |  | 
|  | for(s = &cfg.arlThreshold; s <= &cfg._reserved4[0]; s++) | 
|  | *s = cpu_to_le16(*s); | 
|  |  | 
|  | for(s = &cfg.autoWake; s <= &cfg.autoWake; s++) | 
|  | *s = cpu_to_le16(*s); | 
|  |  | 
|  | ai->config = cfg; | 
|  | return SUCCESS; | 
|  | } | 
|  | static inline void checkThrottle(struct airo_info *ai) { | 
|  | int i; | 
|  | /* Old hardware had a limit on encryption speed */ | 
|  | if (ai->config.authType != AUTH_OPEN && maxencrypt) { | 
|  | for(i=0; i<8; i++) { | 
|  | if (ai->config.rates[i] > maxencrypt) { | 
|  | ai->config.rates[i] = 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | static int writeConfigRid(struct airo_info*ai, int lock) { | 
|  | u16 *s; | 
|  | ConfigRid cfgr; | 
|  |  | 
|  | if (!test_bit (FLAG_COMMIT, &ai->flags)) | 
|  | return SUCCESS; | 
|  |  | 
|  | clear_bit (FLAG_COMMIT, &ai->flags); | 
|  | clear_bit (FLAG_RESET, &ai->flags); | 
|  | checkThrottle(ai); | 
|  | cfgr = ai->config; | 
|  |  | 
|  | if ((cfgr.opmode & 0xFF) == MODE_STA_IBSS) | 
|  | set_bit(FLAG_ADHOC, &ai->flags); | 
|  | else | 
|  | clear_bit(FLAG_ADHOC, &ai->flags); | 
|  |  | 
|  | for(s = &cfgr.len; s <= &cfgr.rtsThres; s++) *s = cpu_to_le16(*s); | 
|  |  | 
|  | for(s = &cfgr.shortRetryLimit; s <= &cfgr.radioType; s++) | 
|  | *s = cpu_to_le16(*s); | 
|  |  | 
|  | for(s = &cfgr.txPower; s <= &cfgr.radioSpecific; s++) | 
|  | *s = cpu_to_le16(*s); | 
|  |  | 
|  | for(s = &cfgr.arlThreshold; s <= &cfgr._reserved4[0]; s++) | 
|  | *s = cpu_to_le16(*s); | 
|  |  | 
|  | for(s = &cfgr.autoWake; s <= &cfgr.autoWake; s++) | 
|  | *s = cpu_to_le16(*s); | 
|  |  | 
|  | return PC4500_writerid( ai, RID_CONFIG, &cfgr, sizeof(cfgr), lock); | 
|  | } | 
|  | static int readStatusRid(struct airo_info*ai, StatusRid *statr, int lock) { | 
|  | int rc = PC4500_readrid(ai, RID_STATUS, statr, sizeof(*statr), lock); | 
|  | u16 *s; | 
|  |  | 
|  | statr->len = le16_to_cpu(statr->len); | 
|  | for(s = &statr->mode; s <= &statr->SSIDlen; s++) *s = le16_to_cpu(*s); | 
|  |  | 
|  | for(s = &statr->beaconPeriod; s <= &statr->shortPreamble; s++) | 
|  | *s = le16_to_cpu(*s); | 
|  | statr->load = le16_to_cpu(statr->load); | 
|  | statr->assocStatus = le16_to_cpu(statr->assocStatus); | 
|  | return rc; | 
|  | } | 
|  | static int readAPListRid(struct airo_info*ai, APListRid *aplr) { | 
|  | int rc =  PC4500_readrid(ai, RID_APLIST, aplr, sizeof(*aplr), 1); | 
|  | aplr->len = le16_to_cpu(aplr->len); | 
|  | return rc; | 
|  | } | 
|  | static int writeAPListRid(struct airo_info*ai, APListRid *aplr, int lock) { | 
|  | int rc; | 
|  | aplr->len = cpu_to_le16(aplr->len); | 
|  | rc = PC4500_writerid(ai, RID_APLIST, aplr, sizeof(*aplr), lock); | 
|  | return rc; | 
|  | } | 
|  | static int readCapabilityRid(struct airo_info*ai, CapabilityRid *capr, int lock) { | 
|  | int rc = PC4500_readrid(ai, RID_CAPABILITIES, capr, sizeof(*capr), lock); | 
|  | u16 *s; | 
|  |  | 
|  | capr->len = le16_to_cpu(capr->len); | 
|  | capr->prodNum = le16_to_cpu(capr->prodNum); | 
|  | capr->radioType = le16_to_cpu(capr->radioType); | 
|  | capr->country = le16_to_cpu(capr->country); | 
|  | for(s = &capr->txPowerLevels[0]; s <= &capr->requiredHard; s++) | 
|  | *s = le16_to_cpu(*s); | 
|  | return rc; | 
|  | } | 
|  | static int readStatsRid(struct airo_info*ai, StatsRid *sr, int rid, int lock) { | 
|  | int rc = PC4500_readrid(ai, rid, sr, sizeof(*sr), lock); | 
|  | u32 *i; | 
|  |  | 
|  | sr->len = le16_to_cpu(sr->len); | 
|  | for(i = &sr->vals[0]; i <= &sr->vals[99]; i++) *i = le32_to_cpu(*i); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int airo_open(struct net_device *dev) { | 
|  | struct airo_info *info = dev->priv; | 
|  | Resp rsp; | 
|  |  | 
|  | if (test_bit(FLAG_FLASHING, &info->flags)) | 
|  | return -EIO; | 
|  |  | 
|  | /* Make sure the card is configured. | 
|  | * Wireless Extensions may postpone config changes until the card | 
|  | * is open (to pipeline changes and speed-up card setup). If | 
|  | * those changes are not yet commited, do it now - Jean II */ | 
|  | if (test_bit (FLAG_COMMIT, &info->flags)) { | 
|  | disable_MAC(info, 1); | 
|  | writeConfigRid(info, 1); | 
|  | } | 
|  |  | 
|  | if (info->wifidev != dev) { | 
|  | /* Power on the MAC controller (which may have been disabled) */ | 
|  | clear_bit(FLAG_RADIO_DOWN, &info->flags); | 
|  | enable_interrupts(info); | 
|  | } | 
|  | enable_MAC(info, &rsp, 1); | 
|  |  | 
|  | netif_start_queue(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) { | 
|  | int npacks, pending; | 
|  | unsigned long flags; | 
|  | struct airo_info *ai = dev->priv; | 
|  |  | 
|  | if (!skb) { | 
|  | airo_print_err(dev->name, "%s: skb == NULL!",__FUNCTION__); | 
|  | return 0; | 
|  | } | 
|  | npacks = skb_queue_len (&ai->txq); | 
|  |  | 
|  | if (npacks >= MAXTXQ - 1) { | 
|  | netif_stop_queue (dev); | 
|  | if (npacks > MAXTXQ) { | 
|  | ai->stats.tx_fifo_errors++; | 
|  | return 1; | 
|  | } | 
|  | skb_queue_tail (&ai->txq, skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&ai->aux_lock, flags); | 
|  | skb_queue_tail (&ai->txq, skb); | 
|  | pending = test_bit(FLAG_PENDING_XMIT, &ai->flags); | 
|  | spin_unlock_irqrestore(&ai->aux_lock,flags); | 
|  | netif_wake_queue (dev); | 
|  |  | 
|  | if (pending == 0) { | 
|  | set_bit(FLAG_PENDING_XMIT, &ai->flags); | 
|  | mpi_send_packet (dev); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * @mpi_send_packet | 
|  | * | 
|  | * Attempt to transmit a packet. Can be called from interrupt | 
|  | * or transmit . return number of packets we tried to send | 
|  | */ | 
|  |  | 
|  | static int mpi_send_packet (struct net_device *dev) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | unsigned char *buffer; | 
|  | s16 len, *payloadLen; | 
|  | struct airo_info *ai = dev->priv; | 
|  | u8 *sendbuf; | 
|  |  | 
|  | /* get a packet to send */ | 
|  |  | 
|  | if ((skb = skb_dequeue(&ai->txq)) == 0) { | 
|  | airo_print_err(dev->name, | 
|  | "%s: Dequeue'd zero in send_packet()", | 
|  | __FUNCTION__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* check min length*/ | 
|  | len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; | 
|  | buffer = skb->data; | 
|  |  | 
|  | ai->txfids[0].tx_desc.offset = 0; | 
|  | ai->txfids[0].tx_desc.valid = 1; | 
|  | ai->txfids[0].tx_desc.eoc = 1; | 
|  | ai->txfids[0].tx_desc.len =len+sizeof(WifiHdr); | 
|  |  | 
|  | /* | 
|  | * Magic, the cards firmware needs a length count (2 bytes) in the host buffer | 
|  | * right after  TXFID_HDR.The TXFID_HDR contains the status short so payloadlen | 
|  | * is immediatly after it. ------------------------------------------------ | 
|  | *                         |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA| | 
|  | *                         ------------------------------------------------ | 
|  | */ | 
|  |  | 
|  | memcpy((char *)ai->txfids[0].virtual_host_addr, | 
|  | (char *)&wifictlhdr8023, sizeof(wifictlhdr8023)); | 
|  |  | 
|  | payloadLen = (s16 *)(ai->txfids[0].virtual_host_addr + | 
|  | sizeof(wifictlhdr8023)); | 
|  | sendbuf = ai->txfids[0].virtual_host_addr + | 
|  | sizeof(wifictlhdr8023) + 2 ; | 
|  |  | 
|  | /* | 
|  | * Firmware automaticly puts 802 header on so | 
|  | * we don't need to account for it in the length | 
|  | */ | 
|  | if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled && | 
|  | (ntohs(((u16 *)buffer)[6]) != 0x888E)) { | 
|  | MICBuffer pMic; | 
|  |  | 
|  | if (encapsulate(ai, (etherHead *)buffer, &pMic, len - sizeof(etherHead)) != SUCCESS) | 
|  | return ERROR; | 
|  |  | 
|  | *payloadLen = cpu_to_le16(len-sizeof(etherHead)+sizeof(pMic)); | 
|  | ai->txfids[0].tx_desc.len += sizeof(pMic); | 
|  | /* copy data into airo dma buffer */ | 
|  | memcpy (sendbuf, buffer, sizeof(etherHead)); | 
|  | buffer += sizeof(etherHead); | 
|  | sendbuf += sizeof(etherHead); | 
|  | memcpy (sendbuf, &pMic, sizeof(pMic)); | 
|  | sendbuf += sizeof(pMic); | 
|  | memcpy (sendbuf, buffer, len - sizeof(etherHead)); | 
|  | } else { | 
|  | *payloadLen = cpu_to_le16(len - sizeof(etherHead)); | 
|  |  | 
|  | dev->trans_start = jiffies; | 
|  |  | 
|  | /* copy data into airo dma buffer */ | 
|  | memcpy(sendbuf, buffer, len); | 
|  | } | 
|  |  | 
|  | memcpy_toio(ai->txfids[0].card_ram_off, | 
|  | &ai->txfids[0].tx_desc, sizeof(TxFid)); | 
|  |  | 
|  | OUT4500(ai, EVACK, 8); | 
|  |  | 
|  | dev_kfree_skb_any(skb); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void get_tx_error(struct airo_info *ai, s32 fid) | 
|  | { | 
|  | u16 status; | 
|  |  | 
|  | if (fid < 0) | 
|  | status = ((WifiCtlHdr *)ai->txfids[0].virtual_host_addr)->ctlhdr.status; | 
|  | else { | 
|  | if (bap_setup(ai, ai->fids[fid] & 0xffff, 4, BAP0) != SUCCESS) | 
|  | return; | 
|  | bap_read(ai, &status, 2, BAP0); | 
|  | } | 
|  | if (le16_to_cpu(status) & 2) /* Too many retries */ | 
|  | ai->stats.tx_aborted_errors++; | 
|  | if (le16_to_cpu(status) & 4) /* Transmit lifetime exceeded */ | 
|  | ai->stats.tx_heartbeat_errors++; | 
|  | if (le16_to_cpu(status) & 8) /* Aid fail */ | 
|  | { } | 
|  | if (le16_to_cpu(status) & 0x10) /* MAC disabled */ | 
|  | ai->stats.tx_carrier_errors++; | 
|  | if (le16_to_cpu(status) & 0x20) /* Association lost */ | 
|  | { } | 
|  | /* We produce a TXDROP event only for retry or lifetime | 
|  | * exceeded, because that's the only status that really mean | 
|  | * that this particular node went away. | 
|  | * Other errors means that *we* screwed up. - Jean II */ | 
|  | if ((le16_to_cpu(status) & 2) || | 
|  | (le16_to_cpu(status) & 4)) { | 
|  | union iwreq_data	wrqu; | 
|  | char junk[0x18]; | 
|  |  | 
|  | /* Faster to skip over useless data than to do | 
|  | * another bap_setup(). We are at offset 0x6 and | 
|  | * need to go to 0x18 and read 6 bytes - Jean II */ | 
|  | bap_read(ai, (u16 *) junk, 0x18, BAP0); | 
|  |  | 
|  | /* Copy 802.11 dest address. | 
|  | * We use the 802.11 header because the frame may | 
|  | * not be 802.3 or may be mangled... | 
|  | * In Ad-Hoc mode, it will be the node address. | 
|  | * In managed mode, it will be most likely the AP addr | 
|  | * User space will figure out how to convert it to | 
|  | * whatever it needs (IP address or else). | 
|  | * - Jean II */ | 
|  | memcpy(wrqu.addr.sa_data, junk + 0x12, ETH_ALEN); | 
|  | wrqu.addr.sa_family = ARPHRD_ETHER; | 
|  |  | 
|  | /* Send event to user space */ | 
|  | wireless_send_event(ai->dev, IWEVTXDROP, &wrqu, NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void airo_end_xmit(struct net_device *dev) { | 
|  | u16 status; | 
|  | int i; | 
|  | struct airo_info *priv = dev->priv; | 
|  | struct sk_buff *skb = priv->xmit.skb; | 
|  | int fid = priv->xmit.fid; | 
|  | u32 *fids = priv->fids; | 
|  |  | 
|  | clear_bit(JOB_XMIT, &priv->jobs); | 
|  | clear_bit(FLAG_PENDING_XMIT, &priv->flags); | 
|  | status = transmit_802_3_packet (priv, fids[fid], skb->data); | 
|  | up(&priv->sem); | 
|  |  | 
|  | i = 0; | 
|  | if ( status == SUCCESS ) { | 
|  | dev->trans_start = jiffies; | 
|  | for (; i < MAX_FIDS / 2 && (priv->fids[i] & 0xffff0000); i++); | 
|  | } else { | 
|  | priv->fids[fid] &= 0xffff; | 
|  | priv->stats.tx_window_errors++; | 
|  | } | 
|  | if (i < MAX_FIDS / 2) | 
|  | netif_wake_queue(dev); | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) { | 
|  | s16 len; | 
|  | int i, j; | 
|  | struct airo_info *priv = dev->priv; | 
|  | u32 *fids = priv->fids; | 
|  |  | 
|  | if ( skb == NULL ) { | 
|  | airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Find a vacant FID */ | 
|  | for( i = 0; i < MAX_FIDS / 2 && (fids[i] & 0xffff0000); i++ ); | 
|  | for( j = i + 1; j < MAX_FIDS / 2 && (fids[j] & 0xffff0000); j++ ); | 
|  |  | 
|  | if ( j >= MAX_FIDS / 2 ) { | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | if (i == MAX_FIDS / 2) { | 
|  | priv->stats.tx_fifo_errors++; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | /* check min length*/ | 
|  | len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; | 
|  | /* Mark fid as used & save length for later */ | 
|  | fids[i] |= (len << 16); | 
|  | priv->xmit.skb = skb; | 
|  | priv->xmit.fid = i; | 
|  | if (down_trylock(&priv->sem) != 0) { | 
|  | set_bit(FLAG_PENDING_XMIT, &priv->flags); | 
|  | netif_stop_queue(dev); | 
|  | set_bit(JOB_XMIT, &priv->jobs); | 
|  | wake_up_interruptible(&priv->thr_wait); | 
|  | } else | 
|  | airo_end_xmit(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void airo_end_xmit11(struct net_device *dev) { | 
|  | u16 status; | 
|  | int i; | 
|  | struct airo_info *priv = dev->priv; | 
|  | struct sk_buff *skb = priv->xmit11.skb; | 
|  | int fid = priv->xmit11.fid; | 
|  | u32 *fids = priv->fids; | 
|  |  | 
|  | clear_bit(JOB_XMIT11, &priv->jobs); | 
|  | clear_bit(FLAG_PENDING_XMIT11, &priv->flags); | 
|  | status = transmit_802_11_packet (priv, fids[fid], skb->data); | 
|  | up(&priv->sem); | 
|  |  | 
|  | i = MAX_FIDS / 2; | 
|  | if ( status == SUCCESS ) { | 
|  | dev->trans_start = jiffies; | 
|  | for (; i < MAX_FIDS && (priv->fids[i] & 0xffff0000); i++); | 
|  | } else { | 
|  | priv->fids[fid] &= 0xffff; | 
|  | priv->stats.tx_window_errors++; | 
|  | } | 
|  | if (i < MAX_FIDS) | 
|  | netif_wake_queue(dev); | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) { | 
|  | s16 len; | 
|  | int i, j; | 
|  | struct airo_info *priv = dev->priv; | 
|  | u32 *fids = priv->fids; | 
|  |  | 
|  | if (test_bit(FLAG_MPI, &priv->flags)) { | 
|  | /* Not implemented yet for MPI350 */ | 
|  | netif_stop_queue(dev); | 
|  | return -ENETDOWN; | 
|  | } | 
|  |  | 
|  | if ( skb == NULL ) { | 
|  | airo_print_err(dev->name, "%s: skb == NULL!", __FUNCTION__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Find a vacant FID */ | 
|  | for( i = MAX_FIDS / 2; i < MAX_FIDS && (fids[i] & 0xffff0000); i++ ); | 
|  | for( j = i + 1; j < MAX_FIDS && (fids[j] & 0xffff0000); j++ ); | 
|  |  | 
|  | if ( j >= MAX_FIDS ) { | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | if (i == MAX_FIDS) { | 
|  | priv->stats.tx_fifo_errors++; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | /* check min length*/ | 
|  | len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; | 
|  | /* Mark fid as used & save length for later */ | 
|  | fids[i] |= (len << 16); | 
|  | priv->xmit11.skb = skb; | 
|  | priv->xmit11.fid = i; | 
|  | if (down_trylock(&priv->sem) != 0) { | 
|  | set_bit(FLAG_PENDING_XMIT11, &priv->flags); | 
|  | netif_stop_queue(dev); | 
|  | set_bit(JOB_XMIT11, &priv->jobs); | 
|  | wake_up_interruptible(&priv->thr_wait); | 
|  | } else | 
|  | airo_end_xmit11(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void airo_read_stats(struct airo_info *ai) { | 
|  | StatsRid stats_rid; | 
|  | u32 *vals = stats_rid.vals; | 
|  |  | 
|  | clear_bit(JOB_STATS, &ai->jobs); | 
|  | if (ai->power.event) { | 
|  | up(&ai->sem); | 
|  | return; | 
|  | } | 
|  | readStatsRid(ai, &stats_rid, RID_STATS, 0); | 
|  | up(&ai->sem); | 
|  |  | 
|  | ai->stats.rx_packets = vals[43] + vals[44] + vals[45]; | 
|  | ai->stats.tx_packets = vals[39] + vals[40] + vals[41]; | 
|  | ai->stats.rx_bytes = vals[92]; | 
|  | ai->stats.tx_bytes = vals[91]; | 
|  | ai->stats.rx_errors = vals[0] + vals[2] + vals[3] + vals[4]; | 
|  | ai->stats.tx_errors = vals[42] + ai->stats.tx_fifo_errors; | 
|  | ai->stats.multicast = vals[43]; | 
|  | ai->stats.collisions = vals[89]; | 
|  |  | 
|  | /* detailed rx_errors: */ | 
|  | ai->stats.rx_length_errors = vals[3]; | 
|  | ai->stats.rx_crc_errors = vals[4]; | 
|  | ai->stats.rx_frame_errors = vals[2]; | 
|  | ai->stats.rx_fifo_errors = vals[0]; | 
|  | } | 
|  |  | 
|  | static struct net_device_stats *airo_get_stats(struct net_device *dev) | 
|  | { | 
|  | struct airo_info *local =  dev->priv; | 
|  |  | 
|  | if (!test_bit(JOB_STATS, &local->jobs)) { | 
|  | /* Get stats out of the card if available */ | 
|  | if (down_trylock(&local->sem) != 0) { | 
|  | set_bit(JOB_STATS, &local->jobs); | 
|  | wake_up_interruptible(&local->thr_wait); | 
|  | } else | 
|  | airo_read_stats(local); | 
|  | } | 
|  |  | 
|  | return &local->stats; | 
|  | } | 
|  |  | 
|  | static void airo_set_promisc(struct airo_info *ai) { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd=CMD_SETMODE; | 
|  | clear_bit(JOB_PROMISC, &ai->jobs); | 
|  | cmd.parm0=(ai->flags&IFF_PROMISC) ? PROMISC : NOPROMISC; | 
|  | issuecommand(ai, &cmd, &rsp); | 
|  | up(&ai->sem); | 
|  | } | 
|  |  | 
|  | static void airo_set_multicast_list(struct net_device *dev) { | 
|  | struct airo_info *ai = dev->priv; | 
|  |  | 
|  | if ((dev->flags ^ ai->flags) & IFF_PROMISC) { | 
|  | change_bit(FLAG_PROMISC, &ai->flags); | 
|  | if (down_trylock(&ai->sem) != 0) { | 
|  | set_bit(JOB_PROMISC, &ai->jobs); | 
|  | wake_up_interruptible(&ai->thr_wait); | 
|  | } else | 
|  | airo_set_promisc(ai); | 
|  | } | 
|  |  | 
|  | if ((dev->flags&IFF_ALLMULTI)||dev->mc_count>0) { | 
|  | /* Turn on multicast.  (Should be already setup...) */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static int airo_set_mac_address(struct net_device *dev, void *p) | 
|  | { | 
|  | struct airo_info *ai = dev->priv; | 
|  | struct sockaddr *addr = p; | 
|  | Resp rsp; | 
|  |  | 
|  | readConfigRid(ai, 1); | 
|  | memcpy (ai->config.macAddr, addr->sa_data, dev->addr_len); | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | disable_MAC(ai, 1); | 
|  | writeConfigRid (ai, 1); | 
|  | enable_MAC(ai, &rsp, 1); | 
|  | memcpy (ai->dev->dev_addr, addr->sa_data, dev->addr_len); | 
|  | if (ai->wifidev) | 
|  | memcpy (ai->wifidev->dev_addr, addr->sa_data, dev->addr_len); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int airo_change_mtu(struct net_device *dev, int new_mtu) | 
|  | { | 
|  | if ((new_mtu < 68) || (new_mtu > 2400)) | 
|  | return -EINVAL; | 
|  | dev->mtu = new_mtu; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int airo_close(struct net_device *dev) { | 
|  | struct airo_info *ai = dev->priv; | 
|  |  | 
|  | netif_stop_queue(dev); | 
|  |  | 
|  | if (ai->wifidev != dev) { | 
|  | #ifdef POWER_ON_DOWN | 
|  | /* Shut power to the card. The idea is that the user can save | 
|  | * power when he doesn't need the card with "ifconfig down". | 
|  | * That's the method that is most friendly towards the network | 
|  | * stack (i.e. the network stack won't try to broadcast | 
|  | * anything on the interface and routes are gone. Jean II */ | 
|  | set_bit(FLAG_RADIO_DOWN, &ai->flags); | 
|  | disable_MAC(ai, 1); | 
|  | #endif | 
|  | disable_interrupts( ai ); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void del_airo_dev( struct net_device *dev ); | 
|  |  | 
|  | void stop_airo_card( struct net_device *dev, int freeres ) | 
|  | { | 
|  | struct airo_info *ai = dev->priv; | 
|  |  | 
|  | set_bit(FLAG_RADIO_DOWN, &ai->flags); | 
|  | disable_MAC(ai, 1); | 
|  | disable_interrupts(ai); | 
|  | free_irq( dev->irq, dev ); | 
|  | takedown_proc_entry( dev, ai ); | 
|  | if (test_bit(FLAG_REGISTERED, &ai->flags)) { | 
|  | unregister_netdev( dev ); | 
|  | if (ai->wifidev) { | 
|  | unregister_netdev(ai->wifidev); | 
|  | free_netdev(ai->wifidev); | 
|  | ai->wifidev = NULL; | 
|  | } | 
|  | clear_bit(FLAG_REGISTERED, &ai->flags); | 
|  | } | 
|  | set_bit(JOB_DIE, &ai->jobs); | 
|  | kill_proc(ai->thr_pid, SIGTERM, 1); | 
|  | wait_for_completion(&ai->thr_exited); | 
|  |  | 
|  | /* | 
|  | * Clean out tx queue | 
|  | */ | 
|  | if (test_bit(FLAG_MPI, &ai->flags) && !skb_queue_empty(&ai->txq)) { | 
|  | struct sk_buff *skb = NULL; | 
|  | for (;(skb = skb_dequeue(&ai->txq));) | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  |  | 
|  | airo_networks_free (ai); | 
|  |  | 
|  | kfree(ai->flash); | 
|  | kfree(ai->rssi); | 
|  | kfree(ai->APList); | 
|  | kfree(ai->SSID); | 
|  | if (freeres) { | 
|  | /* PCMCIA frees this stuff, so only for PCI and ISA */ | 
|  | release_region( dev->base_addr, 64 ); | 
|  | if (test_bit(FLAG_MPI, &ai->flags)) { | 
|  | if (ai->pci) | 
|  | mpi_unmap_card(ai->pci); | 
|  | if (ai->pcimem) | 
|  | iounmap(ai->pcimem); | 
|  | if (ai->pciaux) | 
|  | iounmap(ai->pciaux); | 
|  | pci_free_consistent(ai->pci, PCI_SHARED_LEN, | 
|  | ai->shared, ai->shared_dma); | 
|  | } | 
|  | } | 
|  | crypto_free_tfm(ai->tfm); | 
|  | del_airo_dev( dev ); | 
|  | free_netdev( dev ); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(stop_airo_card); | 
|  |  | 
|  | static int add_airo_dev( struct net_device *dev ); | 
|  |  | 
|  | static int wll_header_parse(struct sk_buff *skb, unsigned char *haddr) | 
|  | { | 
|  | memcpy(haddr, skb->mac.raw + 10, ETH_ALEN); | 
|  | return ETH_ALEN; | 
|  | } | 
|  |  | 
|  | static void mpi_unmap_card(struct pci_dev *pci) | 
|  | { | 
|  | unsigned long mem_start = pci_resource_start(pci, 1); | 
|  | unsigned long mem_len = pci_resource_len(pci, 1); | 
|  | unsigned long aux_start = pci_resource_start(pci, 2); | 
|  | unsigned long aux_len = AUXMEMSIZE; | 
|  |  | 
|  | release_mem_region(aux_start, aux_len); | 
|  | release_mem_region(mem_start, mem_len); | 
|  | } | 
|  |  | 
|  | /************************************************************* | 
|  | *  This routine assumes that descriptors have been setup . | 
|  | *  Run at insmod time or after reset  when the decriptors | 
|  | *  have been initialized . Returns 0 if all is well nz | 
|  | *  otherwise . Does not allocate memory but sets up card | 
|  | *  using previously allocated descriptors. | 
|  | */ | 
|  | static int mpi_init_descriptors (struct airo_info *ai) | 
|  | { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | int i; | 
|  | int rc = SUCCESS; | 
|  |  | 
|  | /* Alloc  card RX descriptors */ | 
|  | netif_stop_queue(ai->dev); | 
|  |  | 
|  | memset(&rsp,0,sizeof(rsp)); | 
|  | memset(&cmd,0,sizeof(cmd)); | 
|  |  | 
|  | cmd.cmd = CMD_ALLOCATEAUX; | 
|  | cmd.parm0 = FID_RX; | 
|  | cmd.parm1 = (ai->rxfids[0].card_ram_off - ai->pciaux); | 
|  | cmd.parm2 = MPI_MAX_FIDS; | 
|  | rc=issuecommand(ai, &cmd, &rsp); | 
|  | if (rc != SUCCESS) { | 
|  | airo_print_err(ai->dev->name, "Couldn't allocate RX FID"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | for (i=0; i<MPI_MAX_FIDS; i++) { | 
|  | memcpy_toio(ai->rxfids[i].card_ram_off, | 
|  | &ai->rxfids[i].rx_desc, sizeof(RxFid)); | 
|  | } | 
|  |  | 
|  | /* Alloc card TX descriptors */ | 
|  |  | 
|  | memset(&rsp,0,sizeof(rsp)); | 
|  | memset(&cmd,0,sizeof(cmd)); | 
|  |  | 
|  | cmd.cmd = CMD_ALLOCATEAUX; | 
|  | cmd.parm0 = FID_TX; | 
|  | cmd.parm1 = (ai->txfids[0].card_ram_off - ai->pciaux); | 
|  | cmd.parm2 = MPI_MAX_FIDS; | 
|  |  | 
|  | for (i=0; i<MPI_MAX_FIDS; i++) { | 
|  | ai->txfids[i].tx_desc.valid = 1; | 
|  | memcpy_toio(ai->txfids[i].card_ram_off, | 
|  | &ai->txfids[i].tx_desc, sizeof(TxFid)); | 
|  | } | 
|  | ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */ | 
|  |  | 
|  | rc=issuecommand(ai, &cmd, &rsp); | 
|  | if (rc != SUCCESS) { | 
|  | airo_print_err(ai->dev->name, "Couldn't allocate TX FID"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Alloc card Rid descriptor */ | 
|  | memset(&rsp,0,sizeof(rsp)); | 
|  | memset(&cmd,0,sizeof(cmd)); | 
|  |  | 
|  | cmd.cmd = CMD_ALLOCATEAUX; | 
|  | cmd.parm0 = RID_RW; | 
|  | cmd.parm1 = (ai->config_desc.card_ram_off - ai->pciaux); | 
|  | cmd.parm2 = 1; /* Magic number... */ | 
|  | rc=issuecommand(ai, &cmd, &rsp); | 
|  | if (rc != SUCCESS) { | 
|  | airo_print_err(ai->dev->name, "Couldn't allocate RID"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | memcpy_toio(ai->config_desc.card_ram_off, | 
|  | &ai->config_desc.rid_desc, sizeof(Rid)); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We are setting up three things here: | 
|  | * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid. | 
|  | * 2) Map PCI memory for issueing commands. | 
|  | * 3) Allocate memory (shared) to send and receive ethernet frames. | 
|  | */ | 
|  | static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci, | 
|  | const char *name) | 
|  | { | 
|  | unsigned long mem_start, mem_len, aux_start, aux_len; | 
|  | int rc = -1; | 
|  | int i; | 
|  | dma_addr_t busaddroff; | 
|  | unsigned char *vpackoff; | 
|  | unsigned char __iomem *pciaddroff; | 
|  |  | 
|  | mem_start = pci_resource_start(pci, 1); | 
|  | mem_len = pci_resource_len(pci, 1); | 
|  | aux_start = pci_resource_start(pci, 2); | 
|  | aux_len = AUXMEMSIZE; | 
|  |  | 
|  | if (!request_mem_region(mem_start, mem_len, name)) { | 
|  | airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s", | 
|  | (int)mem_start, (int)mem_len, name); | 
|  | goto out; | 
|  | } | 
|  | if (!request_mem_region(aux_start, aux_len, name)) { | 
|  | airo_print_err(ai->dev->name, "Couldn't get region %x[%x] for %s", | 
|  | (int)aux_start, (int)aux_len, name); | 
|  | goto free_region1; | 
|  | } | 
|  |  | 
|  | ai->pcimem = ioremap(mem_start, mem_len); | 
|  | if (!ai->pcimem) { | 
|  | airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s", | 
|  | (int)mem_start, (int)mem_len, name); | 
|  | goto free_region2; | 
|  | } | 
|  | ai->pciaux = ioremap(aux_start, aux_len); | 
|  | if (!ai->pciaux) { | 
|  | airo_print_err(ai->dev->name, "Couldn't map region %x[%x] for %s", | 
|  | (int)aux_start, (int)aux_len, name); | 
|  | goto free_memmap; | 
|  | } | 
|  |  | 
|  | /* Reserve PKTSIZE for each fid and 2K for the Rids */ | 
|  | ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma); | 
|  | if (!ai->shared) { | 
|  | airo_print_err(ai->dev->name, "Couldn't alloc_consistent %d", | 
|  | PCI_SHARED_LEN); | 
|  | goto free_auxmap; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup descriptor RX, TX, CONFIG | 
|  | */ | 
|  | busaddroff = ai->shared_dma; | 
|  | pciaddroff = ai->pciaux + AUX_OFFSET; | 
|  | vpackoff   = ai->shared; | 
|  |  | 
|  | /* RX descriptor setup */ | 
|  | for(i = 0; i < MPI_MAX_FIDS; i++) { | 
|  | ai->rxfids[i].pending = 0; | 
|  | ai->rxfids[i].card_ram_off = pciaddroff; | 
|  | ai->rxfids[i].virtual_host_addr = vpackoff; | 
|  | ai->rxfids[i].rx_desc.host_addr = busaddroff; | 
|  | ai->rxfids[i].rx_desc.valid = 1; | 
|  | ai->rxfids[i].rx_desc.len = PKTSIZE; | 
|  | ai->rxfids[i].rx_desc.rdy = 0; | 
|  |  | 
|  | pciaddroff += sizeof(RxFid); | 
|  | busaddroff += PKTSIZE; | 
|  | vpackoff   += PKTSIZE; | 
|  | } | 
|  |  | 
|  | /* TX descriptor setup */ | 
|  | for(i = 0; i < MPI_MAX_FIDS; i++) { | 
|  | ai->txfids[i].card_ram_off = pciaddroff; | 
|  | ai->txfids[i].virtual_host_addr = vpackoff; | 
|  | ai->txfids[i].tx_desc.valid = 1; | 
|  | ai->txfids[i].tx_desc.host_addr = busaddroff; | 
|  | memcpy(ai->txfids[i].virtual_host_addr, | 
|  | &wifictlhdr8023, sizeof(wifictlhdr8023)); | 
|  |  | 
|  | pciaddroff += sizeof(TxFid); | 
|  | busaddroff += PKTSIZE; | 
|  | vpackoff   += PKTSIZE; | 
|  | } | 
|  | ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */ | 
|  |  | 
|  | /* Rid descriptor setup */ | 
|  | ai->config_desc.card_ram_off = pciaddroff; | 
|  | ai->config_desc.virtual_host_addr = vpackoff; | 
|  | ai->config_desc.rid_desc.host_addr = busaddroff; | 
|  | ai->ridbus = busaddroff; | 
|  | ai->config_desc.rid_desc.rid = 0; | 
|  | ai->config_desc.rid_desc.len = RIDSIZE; | 
|  | ai->config_desc.rid_desc.valid = 1; | 
|  | pciaddroff += sizeof(Rid); | 
|  | busaddroff += RIDSIZE; | 
|  | vpackoff   += RIDSIZE; | 
|  |  | 
|  | /* Tell card about descriptors */ | 
|  | if (mpi_init_descriptors (ai) != SUCCESS) | 
|  | goto free_shared; | 
|  |  | 
|  | return 0; | 
|  | free_shared: | 
|  | pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma); | 
|  | free_auxmap: | 
|  | iounmap(ai->pciaux); | 
|  | free_memmap: | 
|  | iounmap(ai->pcimem); | 
|  | free_region2: | 
|  | release_mem_region(aux_start, aux_len); | 
|  | free_region1: | 
|  | release_mem_region(mem_start, mem_len); | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void wifi_setup(struct net_device *dev) | 
|  | { | 
|  | dev->hard_header        = NULL; | 
|  | dev->rebuild_header     = NULL; | 
|  | dev->hard_header_cache  = NULL; | 
|  | dev->header_cache_update= NULL; | 
|  |  | 
|  | dev->hard_header_parse  = wll_header_parse; | 
|  | dev->hard_start_xmit = &airo_start_xmit11; | 
|  | dev->get_stats = &airo_get_stats; | 
|  | dev->set_mac_address = &airo_set_mac_address; | 
|  | dev->do_ioctl = &airo_ioctl; | 
|  | dev->wireless_handlers = &airo_handler_def; | 
|  | dev->change_mtu = &airo_change_mtu; | 
|  | dev->open = &airo_open; | 
|  | dev->stop = &airo_close; | 
|  |  | 
|  | dev->type               = ARPHRD_IEEE80211; | 
|  | dev->hard_header_len    = ETH_HLEN; | 
|  | dev->mtu                = AIRO_DEF_MTU; | 
|  | dev->addr_len           = ETH_ALEN; | 
|  | dev->tx_queue_len       = 100; | 
|  |  | 
|  | memset(dev->broadcast,0xFF, ETH_ALEN); | 
|  |  | 
|  | dev->flags              = IFF_BROADCAST|IFF_MULTICAST; | 
|  | } | 
|  |  | 
|  | static struct net_device *init_wifidev(struct airo_info *ai, | 
|  | struct net_device *ethdev) | 
|  | { | 
|  | int err; | 
|  | struct net_device *dev = alloc_netdev(0, "wifi%d", wifi_setup); | 
|  | if (!dev) | 
|  | return NULL; | 
|  | dev->priv = ethdev->priv; | 
|  | dev->irq = ethdev->irq; | 
|  | dev->base_addr = ethdev->base_addr; | 
|  | dev->wireless_data = ethdev->wireless_data; | 
|  | memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len); | 
|  | err = register_netdev(dev); | 
|  | if (err<0) { | 
|  | free_netdev(dev); | 
|  | return NULL; | 
|  | } | 
|  | return dev; | 
|  | } | 
|  |  | 
|  | static int reset_card( struct net_device *dev , int lock) { | 
|  | struct airo_info *ai = dev->priv; | 
|  |  | 
|  | if (lock && down_interruptible(&ai->sem)) | 
|  | return -1; | 
|  | waitbusy (ai); | 
|  | OUT4500(ai,COMMAND,CMD_SOFTRESET); | 
|  | msleep(200); | 
|  | waitbusy (ai); | 
|  | msleep(200); | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define AIRO_MAX_NETWORK_COUNT	64 | 
|  | static int airo_networks_allocate(struct airo_info *ai) | 
|  | { | 
|  | if (ai->networks) | 
|  | return 0; | 
|  |  | 
|  | ai->networks = | 
|  | kzalloc(AIRO_MAX_NETWORK_COUNT * sizeof(BSSListElement), | 
|  | GFP_KERNEL); | 
|  | if (!ai->networks) { | 
|  | airo_print_warn(ai->dev->name, "Out of memory allocating beacons"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void airo_networks_free(struct airo_info *ai) | 
|  | { | 
|  | if (!ai->networks) | 
|  | return; | 
|  | kfree(ai->networks); | 
|  | ai->networks = NULL; | 
|  | } | 
|  |  | 
|  | static void airo_networks_initialize(struct airo_info *ai) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | INIT_LIST_HEAD(&ai->network_free_list); | 
|  | INIT_LIST_HEAD(&ai->network_list); | 
|  | for (i = 0; i < AIRO_MAX_NETWORK_COUNT; i++) | 
|  | list_add_tail(&ai->networks[i].list, | 
|  | &ai->network_free_list); | 
|  | } | 
|  |  | 
|  | static int airo_test_wpa_capable(struct airo_info *ai) | 
|  | { | 
|  | int status; | 
|  | CapabilityRid cap_rid; | 
|  | const char *name = ai->dev->name; | 
|  |  | 
|  | status = readCapabilityRid(ai, &cap_rid, 1); | 
|  | if (status != SUCCESS) return 0; | 
|  |  | 
|  | /* Only firmware versions 5.30.17 or better can do WPA */ | 
|  | if ((cap_rid.softVer > 0x530) | 
|  | || ((cap_rid.softVer == 0x530) && (cap_rid.softSubVer >= 17))) { | 
|  | airo_print_info(name, "WPA is supported."); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* No WPA support */ | 
|  | airo_print_info(name, "WPA unsupported (only firmware versions 5.30.17" | 
|  | " and greater support WPA.  Detected %s)", cap_rid.prodVer); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct net_device *_init_airo_card( unsigned short irq, int port, | 
|  | int is_pcmcia, struct pci_dev *pci, | 
|  | struct device *dmdev ) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct airo_info *ai; | 
|  | int i, rc; | 
|  |  | 
|  | /* Create the network device object. */ | 
|  | dev = alloc_etherdev(sizeof(*ai)); | 
|  | if (!dev) { | 
|  | airo_print_err("", "Couldn't alloc_etherdev"); | 
|  | return NULL; | 
|  | } | 
|  | if (dev_alloc_name(dev, dev->name) < 0) { | 
|  | airo_print_err("", "Couldn't get name!"); | 
|  | goto err_out_free; | 
|  | } | 
|  |  | 
|  | ai = dev->priv; | 
|  | ai->wifidev = NULL; | 
|  | ai->flags = 0; | 
|  | ai->jobs = 0; | 
|  | ai->dev = dev; | 
|  | if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) { | 
|  | airo_print_dbg(dev->name, "Found an MPI350 card"); | 
|  | set_bit(FLAG_MPI, &ai->flags); | 
|  | } | 
|  | spin_lock_init(&ai->aux_lock); | 
|  | sema_init(&ai->sem, 1); | 
|  | ai->config.len = 0; | 
|  | ai->pci = pci; | 
|  | init_waitqueue_head (&ai->thr_wait); | 
|  | init_completion (&ai->thr_exited); | 
|  | ai->thr_pid = kernel_thread(airo_thread, dev, CLONE_FS | CLONE_FILES); | 
|  | if (ai->thr_pid < 0) | 
|  | goto err_out_free; | 
|  | ai->tfm = NULL; | 
|  | rc = add_airo_dev( dev ); | 
|  | if (rc) | 
|  | goto err_out_thr; | 
|  |  | 
|  | if (airo_networks_allocate (ai)) | 
|  | goto err_out_unlink; | 
|  | airo_networks_initialize (ai); | 
|  |  | 
|  | /* The Airo-specific entries in the device structure. */ | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) { | 
|  | skb_queue_head_init (&ai->txq); | 
|  | dev->hard_start_xmit = &mpi_start_xmit; | 
|  | } else | 
|  | dev->hard_start_xmit = &airo_start_xmit; | 
|  | dev->get_stats = &airo_get_stats; | 
|  | dev->set_multicast_list = &airo_set_multicast_list; | 
|  | dev->set_mac_address = &airo_set_mac_address; | 
|  | dev->do_ioctl = &airo_ioctl; | 
|  | dev->wireless_handlers = &airo_handler_def; | 
|  | ai->wireless_data.spy_data = &ai->spy_data; | 
|  | dev->wireless_data = &ai->wireless_data; | 
|  | dev->change_mtu = &airo_change_mtu; | 
|  | dev->open = &airo_open; | 
|  | dev->stop = &airo_close; | 
|  | dev->irq = irq; | 
|  | dev->base_addr = port; | 
|  |  | 
|  | SET_NETDEV_DEV(dev, dmdev); | 
|  |  | 
|  | reset_card (dev, 1); | 
|  | msleep(400); | 
|  |  | 
|  | rc = request_irq( dev->irq, airo_interrupt, IRQF_SHARED, dev->name, dev ); | 
|  | if (rc) { | 
|  | airo_print_err(dev->name, "register interrupt %d failed, rc %d", | 
|  | irq, rc); | 
|  | goto err_out_unlink; | 
|  | } | 
|  | if (!is_pcmcia) { | 
|  | if (!request_region( dev->base_addr, 64, dev->name )) { | 
|  | rc = -EBUSY; | 
|  | airo_print_err(dev->name, "Couldn't request region"); | 
|  | goto err_out_irq; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) { | 
|  | if (mpi_map_card(ai, pci, dev->name)) { | 
|  | airo_print_err(dev->name, "Could not map memory"); | 
|  | goto err_out_res; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (probe) { | 
|  | if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) { | 
|  | airo_print_err(dev->name, "MAC could not be enabled" ); | 
|  | rc = -EIO; | 
|  | goto err_out_map; | 
|  | } | 
|  | } else if (!test_bit(FLAG_MPI,&ai->flags)) { | 
|  | ai->bap_read = fast_bap_read; | 
|  | set_bit(FLAG_FLASHING, &ai->flags); | 
|  | } | 
|  |  | 
|  | /* Test for WPA support */ | 
|  | if (airo_test_wpa_capable(ai)) { | 
|  | set_bit(FLAG_WPA_CAPABLE, &ai->flags); | 
|  | ai->bssListFirst = RID_WPA_BSSLISTFIRST; | 
|  | ai->bssListNext = RID_WPA_BSSLISTNEXT; | 
|  | ai->bssListRidLen = sizeof(BSSListRid); | 
|  | } else { | 
|  | ai->bssListFirst = RID_BSSLISTFIRST; | 
|  | ai->bssListNext = RID_BSSLISTNEXT; | 
|  | ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra); | 
|  | } | 
|  |  | 
|  | rc = register_netdev(dev); | 
|  | if (rc) { | 
|  | airo_print_err(dev->name, "Couldn't register_netdev"); | 
|  | goto err_out_map; | 
|  | } | 
|  | ai->wifidev = init_wifidev(ai, dev); | 
|  |  | 
|  | set_bit(FLAG_REGISTERED,&ai->flags); | 
|  | airo_print_info(dev->name, "MAC enabled %x:%x:%x:%x:%x:%x", | 
|  | dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], | 
|  | dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] ); | 
|  |  | 
|  | /* Allocate the transmit buffers */ | 
|  | if (probe && !test_bit(FLAG_MPI,&ai->flags)) | 
|  | for( i = 0; i < MAX_FIDS; i++ ) | 
|  | ai->fids[i] = transmit_allocate(ai,AIRO_DEF_MTU,i>=MAX_FIDS/2); | 
|  |  | 
|  | setup_proc_entry( dev, dev->priv ); /* XXX check for failure */ | 
|  | netif_start_queue(dev); | 
|  | SET_MODULE_OWNER(dev); | 
|  | return dev; | 
|  |  | 
|  | err_out_map: | 
|  | if (test_bit(FLAG_MPI,&ai->flags) && pci) { | 
|  | pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma); | 
|  | iounmap(ai->pciaux); | 
|  | iounmap(ai->pcimem); | 
|  | mpi_unmap_card(ai->pci); | 
|  | } | 
|  | err_out_res: | 
|  | if (!is_pcmcia) | 
|  | release_region( dev->base_addr, 64 ); | 
|  | err_out_irq: | 
|  | free_irq(dev->irq, dev); | 
|  | err_out_unlink: | 
|  | del_airo_dev(dev); | 
|  | err_out_thr: | 
|  | set_bit(JOB_DIE, &ai->jobs); | 
|  | kill_proc(ai->thr_pid, SIGTERM, 1); | 
|  | wait_for_completion(&ai->thr_exited); | 
|  | err_out_free: | 
|  | free_netdev(dev); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct net_device *init_airo_card( unsigned short irq, int port, int is_pcmcia, | 
|  | struct device *dmdev) | 
|  | { | 
|  | return _init_airo_card ( irq, port, is_pcmcia, NULL, dmdev); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(init_airo_card); | 
|  |  | 
|  | static int waitbusy (struct airo_info *ai) { | 
|  | int delay = 0; | 
|  | while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) { | 
|  | udelay (10); | 
|  | if ((++delay % 20) == 0) | 
|  | OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); | 
|  | } | 
|  | return delay < 10000; | 
|  | } | 
|  |  | 
|  | int reset_airo_card( struct net_device *dev ) | 
|  | { | 
|  | int i; | 
|  | struct airo_info *ai = dev->priv; | 
|  |  | 
|  | if (reset_card (dev, 1)) | 
|  | return -1; | 
|  |  | 
|  | if ( setup_card(ai, dev->dev_addr, 1 ) != SUCCESS ) { | 
|  | airo_print_err(dev->name, "MAC could not be enabled"); | 
|  | return -1; | 
|  | } | 
|  | airo_print_info(dev->name, "MAC enabled %x:%x:%x:%x:%x:%x", | 
|  | dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], | 
|  | dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); | 
|  | /* Allocate the transmit buffers if needed */ | 
|  | if (!test_bit(FLAG_MPI,&ai->flags)) | 
|  | for( i = 0; i < MAX_FIDS; i++ ) | 
|  | ai->fids[i] = transmit_allocate (ai,AIRO_DEF_MTU,i>=MAX_FIDS/2); | 
|  |  | 
|  | enable_interrupts( ai ); | 
|  | netif_wake_queue(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(reset_airo_card); | 
|  |  | 
|  | static void airo_send_event(struct net_device *dev) { | 
|  | struct airo_info *ai = dev->priv; | 
|  | union iwreq_data wrqu; | 
|  | StatusRid status_rid; | 
|  |  | 
|  | clear_bit(JOB_EVENT, &ai->jobs); | 
|  | PC4500_readrid(ai, RID_STATUS, &status_rid, sizeof(status_rid), 0); | 
|  | up(&ai->sem); | 
|  | wrqu.data.length = 0; | 
|  | wrqu.data.flags = 0; | 
|  | memcpy(wrqu.ap_addr.sa_data, status_rid.bssid[0], ETH_ALEN); | 
|  | wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
|  |  | 
|  | /* Send event to user space */ | 
|  | wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); | 
|  | } | 
|  |  | 
|  | static void airo_process_scan_results (struct airo_info *ai) { | 
|  | union iwreq_data	wrqu; | 
|  | BSSListRid bss; | 
|  | int rc; | 
|  | BSSListElement * loop_net; | 
|  | BSSListElement * tmp_net; | 
|  |  | 
|  | /* Blow away current list of scan results */ | 
|  | list_for_each_entry_safe (loop_net, tmp_net, &ai->network_list, list) { | 
|  | list_move_tail (&loop_net->list, &ai->network_free_list); | 
|  | /* Don't blow away ->list, just BSS data */ | 
|  | memset (loop_net, 0, sizeof (loop_net->bss)); | 
|  | } | 
|  |  | 
|  | /* Try to read the first entry of the scan result */ | 
|  | rc = PC4500_readrid(ai, ai->bssListFirst, &bss, ai->bssListRidLen, 0); | 
|  | if((rc) || (bss.index == 0xffff)) { | 
|  | /* No scan results */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Read and parse all entries */ | 
|  | tmp_net = NULL; | 
|  | while((!rc) && (bss.index != 0xffff)) { | 
|  | /* Grab a network off the free list */ | 
|  | if (!list_empty(&ai->network_free_list)) { | 
|  | tmp_net = list_entry(ai->network_free_list.next, | 
|  | BSSListElement, list); | 
|  | list_del(ai->network_free_list.next); | 
|  | } | 
|  |  | 
|  | if (tmp_net != NULL) { | 
|  | memcpy(tmp_net, &bss, sizeof(tmp_net->bss)); | 
|  | list_add_tail(&tmp_net->list, &ai->network_list); | 
|  | tmp_net = NULL; | 
|  | } | 
|  |  | 
|  | /* Read next entry */ | 
|  | rc = PC4500_readrid(ai, ai->bssListNext, | 
|  | &bss, ai->bssListRidLen, 0); | 
|  | } | 
|  |  | 
|  | out: | 
|  | ai->scan_timeout = 0; | 
|  | clear_bit(JOB_SCAN_RESULTS, &ai->jobs); | 
|  | up(&ai->sem); | 
|  |  | 
|  | /* Send an empty event to user space. | 
|  | * We don't send the received data on | 
|  | * the event because it would require | 
|  | * us to do complex transcoding, and | 
|  | * we want to minimise the work done in | 
|  | * the irq handler. Use a request to | 
|  | * extract the data - Jean II */ | 
|  | wrqu.data.length = 0; | 
|  | wrqu.data.flags = 0; | 
|  | wireless_send_event(ai->dev, SIOCGIWSCAN, &wrqu, NULL); | 
|  | } | 
|  |  | 
|  | static int airo_thread(void *data) { | 
|  | struct net_device *dev = data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | int locked; | 
|  |  | 
|  | daemonize("%s", dev->name); | 
|  | allow_signal(SIGTERM); | 
|  |  | 
|  | while(1) { | 
|  | if (signal_pending(current)) | 
|  | flush_signals(current); | 
|  |  | 
|  | /* make swsusp happy with our thread */ | 
|  | try_to_freeze(); | 
|  |  | 
|  | if (test_bit(JOB_DIE, &ai->jobs)) | 
|  | break; | 
|  |  | 
|  | if (ai->jobs) { | 
|  | locked = down_interruptible(&ai->sem); | 
|  | } else { | 
|  | wait_queue_t wait; | 
|  |  | 
|  | init_waitqueue_entry(&wait, current); | 
|  | add_wait_queue(&ai->thr_wait, &wait); | 
|  | for (;;) { | 
|  | set_current_state(TASK_INTERRUPTIBLE); | 
|  | if (ai->jobs) | 
|  | break; | 
|  | if (ai->expires || ai->scan_timeout) { | 
|  | if (ai->scan_timeout && | 
|  | time_after_eq(jiffies,ai->scan_timeout)){ | 
|  | set_bit(JOB_SCAN_RESULTS, &ai->jobs); | 
|  | break; | 
|  | } else if (ai->expires && | 
|  | time_after_eq(jiffies,ai->expires)){ | 
|  | set_bit(JOB_AUTOWEP, &ai->jobs); | 
|  | break; | 
|  | } | 
|  | if (!signal_pending(current)) { | 
|  | unsigned long wake_at; | 
|  | if (!ai->expires || !ai->scan_timeout) { | 
|  | wake_at = max(ai->expires, | 
|  | ai->scan_timeout); | 
|  | } else { | 
|  | wake_at = min(ai->expires, | 
|  | ai->scan_timeout); | 
|  | } | 
|  | schedule_timeout(wake_at - jiffies); | 
|  | continue; | 
|  | } | 
|  | } else if (!signal_pending(current)) { | 
|  | schedule(); | 
|  | continue; | 
|  | } | 
|  | break; | 
|  | } | 
|  | current->state = TASK_RUNNING; | 
|  | remove_wait_queue(&ai->thr_wait, &wait); | 
|  | locked = 1; | 
|  | } | 
|  |  | 
|  | if (locked) | 
|  | continue; | 
|  |  | 
|  | if (test_bit(JOB_DIE, &ai->jobs)) { | 
|  | up(&ai->sem); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ai->power.event || test_bit(FLAG_FLASHING, &ai->flags)) { | 
|  | up(&ai->sem); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (test_bit(JOB_XMIT, &ai->jobs)) | 
|  | airo_end_xmit(dev); | 
|  | else if (test_bit(JOB_XMIT11, &ai->jobs)) | 
|  | airo_end_xmit11(dev); | 
|  | else if (test_bit(JOB_STATS, &ai->jobs)) | 
|  | airo_read_stats(ai); | 
|  | else if (test_bit(JOB_WSTATS, &ai->jobs)) | 
|  | airo_read_wireless_stats(ai); | 
|  | else if (test_bit(JOB_PROMISC, &ai->jobs)) | 
|  | airo_set_promisc(ai); | 
|  | else if (test_bit(JOB_MIC, &ai->jobs)) | 
|  | micinit(ai); | 
|  | else if (test_bit(JOB_EVENT, &ai->jobs)) | 
|  | airo_send_event(dev); | 
|  | else if (test_bit(JOB_AUTOWEP, &ai->jobs)) | 
|  | timer_func(dev); | 
|  | else if (test_bit(JOB_SCAN_RESULTS, &ai->jobs)) | 
|  | airo_process_scan_results(ai); | 
|  | else  /* Shouldn't get here, but we make sure to unlock */ | 
|  | up(&ai->sem); | 
|  | } | 
|  | complete_and_exit (&ai->thr_exited, 0); | 
|  | } | 
|  |  | 
|  | static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs) { | 
|  | struct net_device *dev = (struct net_device *)dev_id; | 
|  | u16 status; | 
|  | u16 fid; | 
|  | struct airo_info *apriv = dev->priv; | 
|  | u16 savedInterrupts = 0; | 
|  | int handled = 0; | 
|  |  | 
|  | if (!netif_device_present(dev)) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | for (;;) { | 
|  | status = IN4500( apriv, EVSTAT ); | 
|  | if ( !(status & STATUS_INTS) || status == 0xffff ) break; | 
|  |  | 
|  | handled = 1; | 
|  |  | 
|  | if ( status & EV_AWAKE ) { | 
|  | OUT4500( apriv, EVACK, EV_AWAKE ); | 
|  | OUT4500( apriv, EVACK, EV_AWAKE ); | 
|  | } | 
|  |  | 
|  | if (!savedInterrupts) { | 
|  | savedInterrupts = IN4500( apriv, EVINTEN ); | 
|  | OUT4500( apriv, EVINTEN, 0 ); | 
|  | } | 
|  |  | 
|  | if ( status & EV_MIC ) { | 
|  | OUT4500( apriv, EVACK, EV_MIC ); | 
|  | if (test_bit(FLAG_MIC_CAPABLE, &apriv->flags)) { | 
|  | set_bit(JOB_MIC, &apriv->jobs); | 
|  | wake_up_interruptible(&apriv->thr_wait); | 
|  | } | 
|  | } | 
|  | if ( status & EV_LINK ) { | 
|  | union iwreq_data	wrqu; | 
|  | int scan_forceloss = 0; | 
|  | /* The link status has changed, if you want to put a | 
|  | monitor hook in, do it here.  (Remember that | 
|  | interrupts are still disabled!) | 
|  | */ | 
|  | u16 newStatus = IN4500(apriv, LINKSTAT); | 
|  | OUT4500( apriv, EVACK, EV_LINK); | 
|  | /* Here is what newStatus means: */ | 
|  | #define NOBEACON 0x8000 /* Loss of sync - missed beacons */ | 
|  | #define MAXRETRIES 0x8001 /* Loss of sync - max retries */ | 
|  | #define MAXARL 0x8002 /* Loss of sync - average retry level exceeded*/ | 
|  | #define FORCELOSS 0x8003 /* Loss of sync - host request */ | 
|  | #define TSFSYNC 0x8004 /* Loss of sync - TSF synchronization */ | 
|  | #define DEAUTH 0x8100 /* Deauthentication (low byte is reason code) */ | 
|  | #define DISASS 0x8200 /* Disassociation (low byte is reason code) */ | 
|  | #define ASSFAIL 0x8400 /* Association failure (low byte is reason | 
|  | code) */ | 
|  | #define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason | 
|  | code) */ | 
|  | #define ASSOCIATED 0x0400 /* Associated */ | 
|  | #define REASSOCIATED 0x0600 /* Reassociated?  Only on firmware >= 5.30.17 */ | 
|  | #define RC_RESERVED 0 /* Reserved return code */ | 
|  | #define RC_NOREASON 1 /* Unspecified reason */ | 
|  | #define RC_AUTHINV 2 /* Previous authentication invalid */ | 
|  | #define RC_DEAUTH 3 /* Deauthenticated because sending station is | 
|  | leaving */ | 
|  | #define RC_NOACT 4 /* Disassociated due to inactivity */ | 
|  | #define RC_MAXLOAD 5 /* Disassociated because AP is unable to handle | 
|  | all currently associated stations */ | 
|  | #define RC_BADCLASS2 6 /* Class 2 frame received from | 
|  | non-Authenticated station */ | 
|  | #define RC_BADCLASS3 7 /* Class 3 frame received from | 
|  | non-Associated station */ | 
|  | #define RC_STATLEAVE 8 /* Disassociated because sending station is | 
|  | leaving BSS */ | 
|  | #define RC_NOAUTH 9 /* Station requesting (Re)Association is not | 
|  | Authenticated with the responding station */ | 
|  | if (newStatus == FORCELOSS && apriv->scan_timeout > 0) | 
|  | scan_forceloss = 1; | 
|  | if(newStatus == ASSOCIATED || newStatus == REASSOCIATED) { | 
|  | if (auto_wep) | 
|  | apriv->expires = 0; | 
|  | if (apriv->task) | 
|  | wake_up_process (apriv->task); | 
|  | set_bit(FLAG_UPDATE_UNI, &apriv->flags); | 
|  | set_bit(FLAG_UPDATE_MULTI, &apriv->flags); | 
|  |  | 
|  | if (down_trylock(&apriv->sem) != 0) { | 
|  | set_bit(JOB_EVENT, &apriv->jobs); | 
|  | wake_up_interruptible(&apriv->thr_wait); | 
|  | } else | 
|  | airo_send_event(dev); | 
|  | } else if (!scan_forceloss) { | 
|  | if (auto_wep && !apriv->expires) { | 
|  | apriv->expires = RUN_AT(3*HZ); | 
|  | wake_up_interruptible(&apriv->thr_wait); | 
|  | } | 
|  |  | 
|  | /* Send event to user space */ | 
|  | memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN); | 
|  | wrqu.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Check to see if there is something to receive */ | 
|  | if ( status & EV_RX  ) { | 
|  | struct sk_buff *skb = NULL; | 
|  | u16 fc, len, hdrlen = 0; | 
|  | #pragma pack(1) | 
|  | struct { | 
|  | u16 status, len; | 
|  | u8 rssi[2]; | 
|  | u8 rate; | 
|  | u8 freq; | 
|  | u16 tmp[4]; | 
|  | } hdr; | 
|  | #pragma pack() | 
|  | u16 gap; | 
|  | u16 tmpbuf[4]; | 
|  | u16 *buffer; | 
|  |  | 
|  | if (test_bit(FLAG_MPI,&apriv->flags)) { | 
|  | if (test_bit(FLAG_802_11, &apriv->flags)) | 
|  | mpi_receive_802_11(apriv); | 
|  | else | 
|  | mpi_receive_802_3(apriv); | 
|  | OUT4500(apriv, EVACK, EV_RX); | 
|  | goto exitrx; | 
|  | } | 
|  |  | 
|  | fid = IN4500( apriv, RXFID ); | 
|  |  | 
|  | /* Get the packet length */ | 
|  | if (test_bit(FLAG_802_11, &apriv->flags)) { | 
|  | bap_setup (apriv, fid, 4, BAP0); | 
|  | bap_read (apriv, (u16*)&hdr, sizeof(hdr), BAP0); | 
|  | /* Bad CRC. Ignore packet */ | 
|  | if (le16_to_cpu(hdr.status) & 2) | 
|  | hdr.len = 0; | 
|  | if (apriv->wifidev == NULL) | 
|  | hdr.len = 0; | 
|  | } else { | 
|  | bap_setup (apriv, fid, 0x36, BAP0); | 
|  | bap_read (apriv, (u16*)&hdr.len, 2, BAP0); | 
|  | } | 
|  | len = le16_to_cpu(hdr.len); | 
|  |  | 
|  | if (len > AIRO_DEF_MTU) { | 
|  | airo_print_err(apriv->dev->name, "Bad size %d", len); | 
|  | goto badrx; | 
|  | } | 
|  | if (len == 0) | 
|  | goto badrx; | 
|  |  | 
|  | if (test_bit(FLAG_802_11, &apriv->flags)) { | 
|  | bap_read (apriv, (u16*)&fc, sizeof(fc), BAP0); | 
|  | fc = le16_to_cpu(fc); | 
|  | switch (fc & 0xc) { | 
|  | case 4: | 
|  | if ((fc & 0xe0) == 0xc0) | 
|  | hdrlen = 10; | 
|  | else | 
|  | hdrlen = 16; | 
|  | break; | 
|  | case 8: | 
|  | if ((fc&0x300)==0x300){ | 
|  | hdrlen = 30; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | hdrlen = 24; | 
|  | } | 
|  | } else | 
|  | hdrlen = ETH_ALEN * 2; | 
|  |  | 
|  | skb = dev_alloc_skb( len + hdrlen + 2 + 2 ); | 
|  | if ( !skb ) { | 
|  | apriv->stats.rx_dropped++; | 
|  | goto badrx; | 
|  | } | 
|  | skb_reserve(skb, 2); /* This way the IP header is aligned */ | 
|  | buffer = (u16*)skb_put (skb, len + hdrlen); | 
|  | if (test_bit(FLAG_802_11, &apriv->flags)) { | 
|  | buffer[0] = fc; | 
|  | bap_read (apriv, buffer + 1, hdrlen - 2, BAP0); | 
|  | if (hdrlen == 24) | 
|  | bap_read (apriv, tmpbuf, 6, BAP0); | 
|  |  | 
|  | bap_read (apriv, &gap, sizeof(gap), BAP0); | 
|  | gap = le16_to_cpu(gap); | 
|  | if (gap) { | 
|  | if (gap <= 8) { | 
|  | bap_read (apriv, tmpbuf, gap, BAP0); | 
|  | } else { | 
|  | airo_print_err(apriv->dev->name, "gaplen too " | 
|  | "big. Problems will follow..."); | 
|  | } | 
|  | } | 
|  | bap_read (apriv, buffer + hdrlen/2, len, BAP0); | 
|  | } else { | 
|  | MICBuffer micbuf; | 
|  | bap_read (apriv, buffer, ETH_ALEN*2, BAP0); | 
|  | if (apriv->micstats.enabled) { | 
|  | bap_read (apriv,(u16*)&micbuf,sizeof(micbuf),BAP0); | 
|  | if (ntohs(micbuf.typelen) > 0x05DC) | 
|  | bap_setup (apriv, fid, 0x44, BAP0); | 
|  | else { | 
|  | if (len <= sizeof(micbuf)) | 
|  | goto badmic; | 
|  |  | 
|  | len -= sizeof(micbuf); | 
|  | skb_trim (skb, len + hdrlen); | 
|  | } | 
|  | } | 
|  | bap_read(apriv,buffer+ETH_ALEN,len,BAP0); | 
|  | if (decapsulate(apriv,&micbuf,(etherHead*)buffer,len)) { | 
|  | badmic: | 
|  | dev_kfree_skb_irq (skb); | 
|  | badrx: | 
|  | OUT4500( apriv, EVACK, EV_RX); | 
|  | goto exitrx; | 
|  | } | 
|  | } | 
|  | #ifdef WIRELESS_SPY | 
|  | if (apriv->spy_data.spy_number > 0) { | 
|  | char *sa; | 
|  | struct iw_quality wstats; | 
|  | /* Prepare spy data : addr + qual */ | 
|  | if (!test_bit(FLAG_802_11, &apriv->flags)) { | 
|  | sa = (char*)buffer + 6; | 
|  | bap_setup (apriv, fid, 8, BAP0); | 
|  | bap_read (apriv, (u16*)hdr.rssi, 2, BAP0); | 
|  | } else | 
|  | sa = (char*)buffer + 10; | 
|  | wstats.qual = hdr.rssi[0]; | 
|  | if (apriv->rssi) | 
|  | wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm; | 
|  | else | 
|  | wstats.level = (hdr.rssi[1] + 321) / 2; | 
|  | wstats.noise = apriv->wstats.qual.noise; | 
|  | wstats.updated = IW_QUAL_LEVEL_UPDATED | 
|  | | IW_QUAL_QUAL_UPDATED | 
|  | | IW_QUAL_DBM; | 
|  | /* Update spy records */ | 
|  | wireless_spy_update(dev, sa, &wstats); | 
|  | } | 
|  | #endif /* WIRELESS_SPY */ | 
|  | OUT4500( apriv, EVACK, EV_RX); | 
|  |  | 
|  | if (test_bit(FLAG_802_11, &apriv->flags)) { | 
|  | skb->mac.raw = skb->data; | 
|  | skb->pkt_type = PACKET_OTHERHOST; | 
|  | skb->dev = apriv->wifidev; | 
|  | skb->protocol = htons(ETH_P_802_2); | 
|  | } else { | 
|  | skb->dev = dev; | 
|  | skb->protocol = eth_type_trans(skb,dev); | 
|  | } | 
|  | skb->dev->last_rx = jiffies; | 
|  | skb->ip_summed = CHECKSUM_NONE; | 
|  |  | 
|  | netif_rx( skb ); | 
|  | } | 
|  | exitrx: | 
|  |  | 
|  | /* Check to see if a packet has been transmitted */ | 
|  | if (  status & ( EV_TX|EV_TXCPY|EV_TXEXC ) ) { | 
|  | int i; | 
|  | int len = 0; | 
|  | int index = -1; | 
|  |  | 
|  | if (test_bit(FLAG_MPI,&apriv->flags)) { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (status & EV_TXEXC) | 
|  | get_tx_error(apriv, -1); | 
|  | spin_lock_irqsave(&apriv->aux_lock, flags); | 
|  | if (!skb_queue_empty(&apriv->txq)) { | 
|  | spin_unlock_irqrestore(&apriv->aux_lock,flags); | 
|  | mpi_send_packet (dev); | 
|  | } else { | 
|  | clear_bit(FLAG_PENDING_XMIT, &apriv->flags); | 
|  | spin_unlock_irqrestore(&apriv->aux_lock,flags); | 
|  | netif_wake_queue (dev); | 
|  | } | 
|  | OUT4500( apriv, EVACK, | 
|  | status & (EV_TX|EV_TXCPY|EV_TXEXC)); | 
|  | goto exittx; | 
|  | } | 
|  |  | 
|  | fid = IN4500(apriv, TXCOMPLFID); | 
|  |  | 
|  | for( i = 0; i < MAX_FIDS; i++ ) { | 
|  | if ( ( apriv->fids[i] & 0xffff ) == fid ) { | 
|  | len = apriv->fids[i] >> 16; | 
|  | index = i; | 
|  | } | 
|  | } | 
|  | if (index != -1) { | 
|  | if (status & EV_TXEXC) | 
|  | get_tx_error(apriv, index); | 
|  | OUT4500( apriv, EVACK, status & (EV_TX | EV_TXEXC)); | 
|  | /* Set up to be used again */ | 
|  | apriv->fids[index] &= 0xffff; | 
|  | if (index < MAX_FIDS / 2) { | 
|  | if (!test_bit(FLAG_PENDING_XMIT, &apriv->flags)) | 
|  | netif_wake_queue(dev); | 
|  | } else { | 
|  | if (!test_bit(FLAG_PENDING_XMIT11, &apriv->flags)) | 
|  | netif_wake_queue(apriv->wifidev); | 
|  | } | 
|  | } else { | 
|  | OUT4500( apriv, EVACK, status & (EV_TX | EV_TXCPY | EV_TXEXC)); | 
|  | airo_print_err(apriv->dev->name, "Unallocated FID was " | 
|  | "used to xmit" ); | 
|  | } | 
|  | } | 
|  | exittx: | 
|  | if ( status & ~STATUS_INTS & ~IGNORE_INTS ) | 
|  | airo_print_warn(apriv->dev->name, "Got weird status %x", | 
|  | status & ~STATUS_INTS & ~IGNORE_INTS ); | 
|  | } | 
|  |  | 
|  | if (savedInterrupts) | 
|  | OUT4500( apriv, EVINTEN, savedInterrupts ); | 
|  |  | 
|  | /* done.. */ | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  Routines to talk to the card | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  This was originally written for the 4500, hence the name | 
|  | *  NOTE:  If use with 8bit mode and SMP bad things will happen! | 
|  | *         Why would some one do 8 bit IO in an SMP machine?!? | 
|  | */ | 
|  | static void OUT4500( struct airo_info *ai, u16 reg, u16 val ) { | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) | 
|  | reg <<= 1; | 
|  | if ( !do8bitIO ) | 
|  | outw( val, ai->dev->base_addr + reg ); | 
|  | else { | 
|  | outb( val & 0xff, ai->dev->base_addr + reg ); | 
|  | outb( val >> 8, ai->dev->base_addr + reg + 1 ); | 
|  | } | 
|  | } | 
|  |  | 
|  | static u16 IN4500( struct airo_info *ai, u16 reg ) { | 
|  | unsigned short rc; | 
|  |  | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) | 
|  | reg <<= 1; | 
|  | if ( !do8bitIO ) | 
|  | rc = inw( ai->dev->base_addr + reg ); | 
|  | else { | 
|  | rc = inb( ai->dev->base_addr + reg ); | 
|  | rc += ((int)inb( ai->dev->base_addr + reg + 1 )) << 8; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock ) { | 
|  | int rc; | 
|  | Cmd cmd; | 
|  |  | 
|  | /* FLAG_RADIO_OFF : Radio disabled via /proc or Wireless Extensions | 
|  | * FLAG_RADIO_DOWN : Radio disabled via "ifconfig ethX down" | 
|  | * Note : we could try to use !netif_running(dev) in enable_MAC() | 
|  | * instead of this flag, but I don't trust it *within* the | 
|  | * open/close functions, and testing both flags together is | 
|  | * "cheaper" - Jean II */ | 
|  | if (ai->flags & FLAG_RADIO_MASK) return SUCCESS; | 
|  |  | 
|  | if (lock && down_interruptible(&ai->sem)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | if (!test_bit(FLAG_ENABLED, &ai->flags)) { | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd = MAC_ENABLE; | 
|  | rc = issuecommand(ai, &cmd, rsp); | 
|  | if (rc == SUCCESS) | 
|  | set_bit(FLAG_ENABLED, &ai->flags); | 
|  | } else | 
|  | rc = SUCCESS; | 
|  |  | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  |  | 
|  | if (rc) | 
|  | airo_print_err(ai->dev->name, "%s: Cannot enable MAC, err=%d", | 
|  | __FUNCTION__, rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void disable_MAC( struct airo_info *ai, int lock ) { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | if (lock && down_interruptible(&ai->sem)) | 
|  | return; | 
|  |  | 
|  | if (test_bit(FLAG_ENABLED, &ai->flags)) { | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd = MAC_DISABLE; // disable in case already enabled | 
|  | issuecommand(ai, &cmd, &rsp); | 
|  | clear_bit(FLAG_ENABLED, &ai->flags); | 
|  | } | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | } | 
|  |  | 
|  | static void enable_interrupts( struct airo_info *ai ) { | 
|  | /* Enable the interrupts */ | 
|  | OUT4500( ai, EVINTEN, STATUS_INTS ); | 
|  | } | 
|  |  | 
|  | static void disable_interrupts( struct airo_info *ai ) { | 
|  | OUT4500( ai, EVINTEN, 0 ); | 
|  | } | 
|  |  | 
|  | static void mpi_receive_802_3(struct airo_info *ai) | 
|  | { | 
|  | RxFid rxd; | 
|  | int len = 0; | 
|  | struct sk_buff *skb; | 
|  | char *buffer; | 
|  | int off = 0; | 
|  | MICBuffer micbuf; | 
|  |  | 
|  | memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd)); | 
|  | /* Make sure we got something */ | 
|  | if (rxd.rdy && rxd.valid == 0) { | 
|  | len = rxd.len + 12; | 
|  | if (len < 12 || len > 2048) | 
|  | goto badrx; | 
|  |  | 
|  | skb = dev_alloc_skb(len); | 
|  | if (!skb) { | 
|  | ai->stats.rx_dropped++; | 
|  | goto badrx; | 
|  | } | 
|  | buffer = skb_put(skb,len); | 
|  | memcpy(buffer, ai->rxfids[0].virtual_host_addr, ETH_ALEN * 2); | 
|  | if (ai->micstats.enabled) { | 
|  | memcpy(&micbuf, | 
|  | ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2, | 
|  | sizeof(micbuf)); | 
|  | if (ntohs(micbuf.typelen) <= 0x05DC) { | 
|  | if (len <= sizeof(micbuf) + ETH_ALEN * 2) | 
|  | goto badmic; | 
|  |  | 
|  | off = sizeof(micbuf); | 
|  | skb_trim (skb, len - off); | 
|  | } | 
|  | } | 
|  | memcpy(buffer + ETH_ALEN * 2, | 
|  | ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2 + off, | 
|  | len - ETH_ALEN * 2 - off); | 
|  | if (decapsulate (ai, &micbuf, (etherHead*)buffer, len - off - ETH_ALEN * 2)) { | 
|  | badmic: | 
|  | dev_kfree_skb_irq (skb); | 
|  | goto badrx; | 
|  | } | 
|  | #ifdef WIRELESS_SPY | 
|  | if (ai->spy_data.spy_number > 0) { | 
|  | char *sa; | 
|  | struct iw_quality wstats; | 
|  | /* Prepare spy data : addr + qual */ | 
|  | sa = buffer + ETH_ALEN; | 
|  | wstats.qual = 0; /* XXX Where do I get that info from ??? */ | 
|  | wstats.level = 0; | 
|  | wstats.updated = 0; | 
|  | /* Update spy records */ | 
|  | wireless_spy_update(ai->dev, sa, &wstats); | 
|  | } | 
|  | #endif /* WIRELESS_SPY */ | 
|  |  | 
|  | skb->dev = ai->dev; | 
|  | skb->ip_summed = CHECKSUM_NONE; | 
|  | skb->protocol = eth_type_trans(skb, ai->dev); | 
|  | skb->dev->last_rx = jiffies; | 
|  | netif_rx(skb); | 
|  | } | 
|  | badrx: | 
|  | if (rxd.valid == 0) { | 
|  | rxd.valid = 1; | 
|  | rxd.rdy = 0; | 
|  | rxd.len = PKTSIZE; | 
|  | memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd)); | 
|  | } | 
|  | } | 
|  |  | 
|  | void mpi_receive_802_11 (struct airo_info *ai) | 
|  | { | 
|  | RxFid rxd; | 
|  | struct sk_buff *skb = NULL; | 
|  | u16 fc, len, hdrlen = 0; | 
|  | #pragma pack(1) | 
|  | struct { | 
|  | u16 status, len; | 
|  | u8 rssi[2]; | 
|  | u8 rate; | 
|  | u8 freq; | 
|  | u16 tmp[4]; | 
|  | } hdr; | 
|  | #pragma pack() | 
|  | u16 gap; | 
|  | u16 *buffer; | 
|  | char *ptr = ai->rxfids[0].virtual_host_addr+4; | 
|  |  | 
|  | memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd)); | 
|  | memcpy ((char *)&hdr, ptr, sizeof(hdr)); | 
|  | ptr += sizeof(hdr); | 
|  | /* Bad CRC. Ignore packet */ | 
|  | if (le16_to_cpu(hdr.status) & 2) | 
|  | hdr.len = 0; | 
|  | if (ai->wifidev == NULL) | 
|  | hdr.len = 0; | 
|  | len = le16_to_cpu(hdr.len); | 
|  | if (len > AIRO_DEF_MTU) { | 
|  | airo_print_err(ai->dev->name, "Bad size %d", len); | 
|  | goto badrx; | 
|  | } | 
|  | if (len == 0) | 
|  | goto badrx; | 
|  |  | 
|  | memcpy ((char *)&fc, ptr, sizeof(fc)); | 
|  | fc = le16_to_cpu(fc); | 
|  | switch (fc & 0xc) { | 
|  | case 4: | 
|  | if ((fc & 0xe0) == 0xc0) | 
|  | hdrlen = 10; | 
|  | else | 
|  | hdrlen = 16; | 
|  | break; | 
|  | case 8: | 
|  | if ((fc&0x300)==0x300){ | 
|  | hdrlen = 30; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | hdrlen = 24; | 
|  | } | 
|  |  | 
|  | skb = dev_alloc_skb( len + hdrlen + 2 ); | 
|  | if ( !skb ) { | 
|  | ai->stats.rx_dropped++; | 
|  | goto badrx; | 
|  | } | 
|  | buffer = (u16*)skb_put (skb, len + hdrlen); | 
|  | memcpy ((char *)buffer, ptr, hdrlen); | 
|  | ptr += hdrlen; | 
|  | if (hdrlen == 24) | 
|  | ptr += 6; | 
|  | memcpy ((char *)&gap, ptr, sizeof(gap)); | 
|  | ptr += sizeof(gap); | 
|  | gap = le16_to_cpu(gap); | 
|  | if (gap) { | 
|  | if (gap <= 8) | 
|  | ptr += gap; | 
|  | else | 
|  | airo_print_err(ai->dev->name, | 
|  | "gaplen too big. Problems will follow..."); | 
|  | } | 
|  | memcpy ((char *)buffer + hdrlen, ptr, len); | 
|  | ptr += len; | 
|  | #ifdef IW_WIRELESS_SPY	  /* defined in iw_handler.h */ | 
|  | if (ai->spy_data.spy_number > 0) { | 
|  | char *sa; | 
|  | struct iw_quality wstats; | 
|  | /* Prepare spy data : addr + qual */ | 
|  | sa = (char*)buffer + 10; | 
|  | wstats.qual = hdr.rssi[0]; | 
|  | if (ai->rssi) | 
|  | wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm; | 
|  | else | 
|  | wstats.level = (hdr.rssi[1] + 321) / 2; | 
|  | wstats.noise = ai->wstats.qual.noise; | 
|  | wstats.updated = IW_QUAL_QUAL_UPDATED | 
|  | | IW_QUAL_LEVEL_UPDATED | 
|  | | IW_QUAL_DBM; | 
|  | /* Update spy records */ | 
|  | wireless_spy_update(ai->dev, sa, &wstats); | 
|  | } | 
|  | #endif /* IW_WIRELESS_SPY */ | 
|  | skb->mac.raw = skb->data; | 
|  | skb->pkt_type = PACKET_OTHERHOST; | 
|  | skb->dev = ai->wifidev; | 
|  | skb->protocol = htons(ETH_P_802_2); | 
|  | skb->dev->last_rx = jiffies; | 
|  | skb->ip_summed = CHECKSUM_NONE; | 
|  | netif_rx( skb ); | 
|  | badrx: | 
|  | if (rxd.valid == 0) { | 
|  | rxd.valid = 1; | 
|  | rxd.rdy = 0; | 
|  | rxd.len = PKTSIZE; | 
|  | memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) | 
|  | { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | int status; | 
|  | int i; | 
|  | SsidRid mySsid; | 
|  | u16 lastindex; | 
|  | WepKeyRid wkr; | 
|  | int rc; | 
|  |  | 
|  | memset( &mySsid, 0, sizeof( mySsid ) ); | 
|  | kfree (ai->flash); | 
|  | ai->flash = NULL; | 
|  |  | 
|  | /* The NOP is the first step in getting the card going */ | 
|  | cmd.cmd = NOP; | 
|  | cmd.parm0 = cmd.parm1 = cmd.parm2 = 0; | 
|  | if (lock && down_interruptible(&ai->sem)) | 
|  | return ERROR; | 
|  | if ( issuecommand( ai, &cmd, &rsp ) != SUCCESS ) { | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | return ERROR; | 
|  | } | 
|  | disable_MAC( ai, 0); | 
|  |  | 
|  | // Let's figure out if we need to use the AUX port | 
|  | if (!test_bit(FLAG_MPI,&ai->flags)) { | 
|  | cmd.cmd = CMD_ENABLEAUX; | 
|  | if (issuecommand(ai, &cmd, &rsp) != SUCCESS) { | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | airo_print_err(ai->dev->name, "Error checking for AUX port"); | 
|  | return ERROR; | 
|  | } | 
|  | if (!aux_bap || rsp.status & 0xff00) { | 
|  | ai->bap_read = fast_bap_read; | 
|  | airo_print_dbg(ai->dev->name, "Doing fast bap_reads"); | 
|  | } else { | 
|  | ai->bap_read = aux_bap_read; | 
|  | airo_print_dbg(ai->dev->name, "Doing AUX bap_reads"); | 
|  | } | 
|  | } | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | if (ai->config.len == 0) { | 
|  | tdsRssiRid rssi_rid; | 
|  | CapabilityRid cap_rid; | 
|  |  | 
|  | kfree(ai->APList); | 
|  | ai->APList = NULL; | 
|  | kfree(ai->SSID); | 
|  | ai->SSID = NULL; | 
|  | // general configuration (read/modify/write) | 
|  | status = readConfigRid(ai, lock); | 
|  | if ( status != SUCCESS ) return ERROR; | 
|  |  | 
|  | status = readCapabilityRid(ai, &cap_rid, lock); | 
|  | if ( status != SUCCESS ) return ERROR; | 
|  |  | 
|  | status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock); | 
|  | if ( status == SUCCESS ) { | 
|  | if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL) | 
|  | memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */ | 
|  | } | 
|  | else { | 
|  | kfree(ai->rssi); | 
|  | ai->rssi = NULL; | 
|  | if (cap_rid.softCap & 8) | 
|  | ai->config.rmode |= RXMODE_NORMALIZED_RSSI; | 
|  | else | 
|  | airo_print_warn(ai->dev->name, "unknown received signal " | 
|  | "level scale"); | 
|  | } | 
|  | ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS; | 
|  | ai->config.authType = AUTH_OPEN; | 
|  | ai->config.modulation = MOD_CCK; | 
|  |  | 
|  | if ((cap_rid.len>=sizeof(cap_rid)) && (cap_rid.extSoftCap&1) && | 
|  | (micsetup(ai) == SUCCESS)) { | 
|  | ai->config.opmode |= MODE_MIC; | 
|  | set_bit(FLAG_MIC_CAPABLE, &ai->flags); | 
|  | } | 
|  |  | 
|  | /* Save off the MAC */ | 
|  | for( i = 0; i < ETH_ALEN; i++ ) { | 
|  | mac[i] = ai->config.macAddr[i]; | 
|  | } | 
|  |  | 
|  | /* Check to see if there are any insmod configured | 
|  | rates to add */ | 
|  | if ( rates[0] ) { | 
|  | int i = 0; | 
|  | memset(ai->config.rates,0,sizeof(ai->config.rates)); | 
|  | for( i = 0; i < 8 && rates[i]; i++ ) { | 
|  | ai->config.rates[i] = rates[i]; | 
|  | } | 
|  | } | 
|  | if ( basic_rate > 0 ) { | 
|  | int i; | 
|  | for( i = 0; i < 8; i++ ) { | 
|  | if ( ai->config.rates[i] == basic_rate || | 
|  | !ai->config.rates ) { | 
|  | ai->config.rates[i] = basic_rate | 0x80; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } | 
|  |  | 
|  | /* Setup the SSIDs if present */ | 
|  | if ( ssids[0] ) { | 
|  | int i; | 
|  | for( i = 0; i < 3 && ssids[i]; i++ ) { | 
|  | mySsid.ssids[i].len = strlen(ssids[i]); | 
|  | if ( mySsid.ssids[i].len > 32 ) | 
|  | mySsid.ssids[i].len = 32; | 
|  | memcpy(mySsid.ssids[i].ssid, ssids[i], | 
|  | mySsid.ssids[i].len); | 
|  | } | 
|  | mySsid.len = sizeof(mySsid); | 
|  | } | 
|  |  | 
|  | status = writeConfigRid(ai, lock); | 
|  | if ( status != SUCCESS ) return ERROR; | 
|  |  | 
|  | /* Set up the SSID list */ | 
|  | if ( ssids[0] ) { | 
|  | status = writeSsidRid(ai, &mySsid, lock); | 
|  | if ( status != SUCCESS ) return ERROR; | 
|  | } | 
|  |  | 
|  | status = enable_MAC(ai, &rsp, lock); | 
|  | if ( status != SUCCESS || (rsp.status & 0xFF00) != 0) { | 
|  | airo_print_err(ai->dev->name, "Bad MAC enable reason = %x, rid = %x," | 
|  | " offset = %d", rsp.rsp0, rsp.rsp1, rsp.rsp2 ); | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | /* Grab the initial wep key, we gotta save it for auto_wep */ | 
|  | rc = readWepKeyRid(ai, &wkr, 1, lock); | 
|  | if (rc == SUCCESS) do { | 
|  | lastindex = wkr.kindex; | 
|  | if (wkr.kindex == 0xffff) { | 
|  | ai->defindex = wkr.mac[0]; | 
|  | } | 
|  | rc = readWepKeyRid(ai, &wkr, 0, lock); | 
|  | } while(lastindex != wkr.kindex); | 
|  |  | 
|  | if (auto_wep) { | 
|  | ai->expires = RUN_AT(3*HZ); | 
|  | wake_up_interruptible(&ai->thr_wait); | 
|  | } | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) { | 
|  | // Im really paranoid about letting it run forever! | 
|  | int max_tries = 600000; | 
|  |  | 
|  | if (IN4500(ai, EVSTAT) & EV_CMD) | 
|  | OUT4500(ai, EVACK, EV_CMD); | 
|  |  | 
|  | OUT4500(ai, PARAM0, pCmd->parm0); | 
|  | OUT4500(ai, PARAM1, pCmd->parm1); | 
|  | OUT4500(ai, PARAM2, pCmd->parm2); | 
|  | OUT4500(ai, COMMAND, pCmd->cmd); | 
|  |  | 
|  | while (max_tries-- && (IN4500(ai, EVSTAT) & EV_CMD) == 0) { | 
|  | if ((IN4500(ai, COMMAND)) == pCmd->cmd) | 
|  | // PC4500 didn't notice command, try again | 
|  | OUT4500(ai, COMMAND, pCmd->cmd); | 
|  | if (!in_atomic() && (max_tries & 255) == 0) | 
|  | schedule(); | 
|  | } | 
|  |  | 
|  | if ( max_tries == -1 ) { | 
|  | airo_print_err(ai->dev->name, | 
|  | "Max tries exceeded when issueing command"); | 
|  | if (IN4500(ai, COMMAND) & COMMAND_BUSY) | 
|  | OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | // command completed | 
|  | pRsp->status = IN4500(ai, STATUS); | 
|  | pRsp->rsp0 = IN4500(ai, RESP0); | 
|  | pRsp->rsp1 = IN4500(ai, RESP1); | 
|  | pRsp->rsp2 = IN4500(ai, RESP2); | 
|  | if ((pRsp->status & 0xff00)!=0 && pCmd->cmd != CMD_SOFTRESET) { | 
|  | airo_print_err(ai->dev->name, "cmd= %x\n", pCmd->cmd); | 
|  | airo_print_err(ai->dev->name, "status= %x\n", pRsp->status); | 
|  | airo_print_err(ai->dev->name, "Rsp0= %x\n", pRsp->rsp0); | 
|  | airo_print_err(ai->dev->name, "Rsp1= %x\n", pRsp->rsp1); | 
|  | airo_print_err(ai->dev->name, "Rsp2= %x\n", pRsp->rsp2); | 
|  | } | 
|  |  | 
|  | // clear stuck command busy if necessary | 
|  | if (IN4500(ai, COMMAND) & COMMAND_BUSY) { | 
|  | OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); | 
|  | } | 
|  | // acknowledge processing the status/response | 
|  | OUT4500(ai, EVACK, EV_CMD); | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | /* Sets up the bap to start exchange data.  whichbap should | 
|  | * be one of the BAP0 or BAP1 defines.  Locks should be held before | 
|  | * calling! */ | 
|  | static int bap_setup(struct airo_info *ai, u16 rid, u16 offset, int whichbap ) | 
|  | { | 
|  | int timeout = 50; | 
|  | int max_tries = 3; | 
|  |  | 
|  | OUT4500(ai, SELECT0+whichbap, rid); | 
|  | OUT4500(ai, OFFSET0+whichbap, offset); | 
|  | while (1) { | 
|  | int status = IN4500(ai, OFFSET0+whichbap); | 
|  | if (status & BAP_BUSY) { | 
|  | /* This isn't really a timeout, but its kinda | 
|  | close */ | 
|  | if (timeout--) { | 
|  | continue; | 
|  | } | 
|  | } else if ( status & BAP_ERR ) { | 
|  | /* invalid rid or offset */ | 
|  | airo_print_err(ai->dev->name, "BAP error %x %d", | 
|  | status, whichbap ); | 
|  | return ERROR; | 
|  | } else if (status & BAP_DONE) { // success | 
|  | return SUCCESS; | 
|  | } | 
|  | if ( !(max_tries--) ) { | 
|  | airo_print_err(ai->dev->name, | 
|  | "airo: BAP setup error too many retries\n"); | 
|  | return ERROR; | 
|  | } | 
|  | // -- PC4500 missed it, try again | 
|  | OUT4500(ai, SELECT0+whichbap, rid); | 
|  | OUT4500(ai, OFFSET0+whichbap, offset); | 
|  | timeout = 50; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* should only be called by aux_bap_read.  This aux function and the | 
|  | following use concepts not documented in the developers guide.  I | 
|  | got them from a patch given to my by Aironet */ | 
|  | static u16 aux_setup(struct airo_info *ai, u16 page, | 
|  | u16 offset, u16 *len) | 
|  | { | 
|  | u16 next; | 
|  |  | 
|  | OUT4500(ai, AUXPAGE, page); | 
|  | OUT4500(ai, AUXOFF, 0); | 
|  | next = IN4500(ai, AUXDATA); | 
|  | *len = IN4500(ai, AUXDATA)&0xff; | 
|  | if (offset != 4) OUT4500(ai, AUXOFF, offset); | 
|  | return next; | 
|  | } | 
|  |  | 
|  | /* requires call to bap_setup() first */ | 
|  | static int aux_bap_read(struct airo_info *ai, u16 *pu16Dst, | 
|  | int bytelen, int whichbap) | 
|  | { | 
|  | u16 len; | 
|  | u16 page; | 
|  | u16 offset; | 
|  | u16 next; | 
|  | int words; | 
|  | int i; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ai->aux_lock, flags); | 
|  | page = IN4500(ai, SWS0+whichbap); | 
|  | offset = IN4500(ai, SWS2+whichbap); | 
|  | next = aux_setup(ai, page, offset, &len); | 
|  | words = (bytelen+1)>>1; | 
|  |  | 
|  | for (i=0; i<words;) { | 
|  | int count; | 
|  | count = (len>>1) < (words-i) ? (len>>1) : (words-i); | 
|  | if ( !do8bitIO ) | 
|  | insw( ai->dev->base_addr+DATA0+whichbap, | 
|  | pu16Dst+i,count ); | 
|  | else | 
|  | insb( ai->dev->base_addr+DATA0+whichbap, | 
|  | pu16Dst+i, count << 1 ); | 
|  | i += count; | 
|  | if (i<words) { | 
|  | next = aux_setup(ai, next, 4, &len); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&ai->aux_lock, flags); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* requires call to bap_setup() first */ | 
|  | static int fast_bap_read(struct airo_info *ai, u16 *pu16Dst, | 
|  | int bytelen, int whichbap) | 
|  | { | 
|  | bytelen = (bytelen + 1) & (~1); // round up to even value | 
|  | if ( !do8bitIO ) | 
|  | insw( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen>>1 ); | 
|  | else | 
|  | insb( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen ); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | /* requires call to bap_setup() first */ | 
|  | static int bap_write(struct airo_info *ai, const u16 *pu16Src, | 
|  | int bytelen, int whichbap) | 
|  | { | 
|  | bytelen = (bytelen + 1) & (~1); // round up to even value | 
|  | if ( !do8bitIO ) | 
|  | outsw( ai->dev->base_addr+DATA0+whichbap, | 
|  | pu16Src, bytelen>>1 ); | 
|  | else | 
|  | outsb( ai->dev->base_addr+DATA0+whichbap, pu16Src, bytelen ); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static int PC4500_accessrid(struct airo_info *ai, u16 rid, u16 accmd) | 
|  | { | 
|  | Cmd cmd; /* for issuing commands */ | 
|  | Resp rsp; /* response from commands */ | 
|  | u16 status; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd = accmd; | 
|  | cmd.parm0 = rid; | 
|  | status = issuecommand(ai, &cmd, &rsp); | 
|  | if (status != 0) return status; | 
|  | if ( (rsp.status & 0x7F00) != 0) { | 
|  | return (accmd << 8) + (rsp.rsp0 & 0xFF); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*  Note, that we are using BAP1 which is also used by transmit, so | 
|  | *  we must get a lock. */ | 
|  | static int PC4500_readrid(struct airo_info *ai, u16 rid, void *pBuf, int len, int lock) | 
|  | { | 
|  | u16 status; | 
|  | int rc = SUCCESS; | 
|  |  | 
|  | if (lock) { | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return ERROR; | 
|  | } | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | memset(&rsp, 0, sizeof(rsp)); | 
|  | ai->config_desc.rid_desc.valid = 1; | 
|  | ai->config_desc.rid_desc.len = RIDSIZE; | 
|  | ai->config_desc.rid_desc.rid = 0; | 
|  | ai->config_desc.rid_desc.host_addr = ai->ridbus; | 
|  |  | 
|  | cmd.cmd = CMD_ACCESS; | 
|  | cmd.parm0 = rid; | 
|  |  | 
|  | memcpy_toio(ai->config_desc.card_ram_off, | 
|  | &ai->config_desc.rid_desc, sizeof(Rid)); | 
|  |  | 
|  | rc = issuecommand(ai, &cmd, &rsp); | 
|  |  | 
|  | if (rsp.status & 0x7f00) | 
|  | rc = rsp.rsp0; | 
|  | if (!rc) | 
|  | memcpy(pBuf, ai->config_desc.virtual_host_addr, len); | 
|  | goto done; | 
|  | } else { | 
|  | if ((status = PC4500_accessrid(ai, rid, CMD_ACCESS))!=SUCCESS) { | 
|  | rc = status; | 
|  | goto done; | 
|  | } | 
|  | if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) { | 
|  | rc = ERROR; | 
|  | goto done; | 
|  | } | 
|  | // read the rid length field | 
|  | bap_read(ai, pBuf, 2, BAP1); | 
|  | // length for remaining part of rid | 
|  | len = min(len, (int)le16_to_cpu(*(u16*)pBuf)) - 2; | 
|  |  | 
|  | if ( len <= 2 ) { | 
|  | airo_print_err(ai->dev->name, | 
|  | "Rid %x has a length of %d which is too short", | 
|  | (int)rid, (int)len ); | 
|  | rc = ERROR; | 
|  | goto done; | 
|  | } | 
|  | // read remainder of the rid | 
|  | rc = bap_read(ai, ((u16*)pBuf)+1, len, BAP1); | 
|  | } | 
|  | done: | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /*  Note, that we are using BAP1 which is also used by transmit, so | 
|  | *  make sure this isnt called when a transmit is happening */ | 
|  | static int PC4500_writerid(struct airo_info *ai, u16 rid, | 
|  | const void *pBuf, int len, int lock) | 
|  | { | 
|  | u16 status; | 
|  | int rc = SUCCESS; | 
|  |  | 
|  | *(u16*)pBuf = cpu_to_le16((u16)len); | 
|  |  | 
|  | if (lock) { | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return ERROR; | 
|  | } | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid)) | 
|  | airo_print_err(ai->dev->name, | 
|  | "%s: MAC should be disabled (rid=%04x)", | 
|  | __FUNCTION__, rid); | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | memset(&rsp, 0, sizeof(rsp)); | 
|  |  | 
|  | ai->config_desc.rid_desc.valid = 1; | 
|  | ai->config_desc.rid_desc.len = *((u16 *)pBuf); | 
|  | ai->config_desc.rid_desc.rid = 0; | 
|  |  | 
|  | cmd.cmd = CMD_WRITERID; | 
|  | cmd.parm0 = rid; | 
|  |  | 
|  | memcpy_toio(ai->config_desc.card_ram_off, | 
|  | &ai->config_desc.rid_desc, sizeof(Rid)); | 
|  |  | 
|  | if (len < 4 || len > 2047) { | 
|  | airo_print_err(ai->dev->name, "%s: len=%d", __FUNCTION__, len); | 
|  | rc = -1; | 
|  | } else { | 
|  | memcpy((char *)ai->config_desc.virtual_host_addr, | 
|  | pBuf, len); | 
|  |  | 
|  | rc = issuecommand(ai, &cmd, &rsp); | 
|  | if ((rc & 0xff00) != 0) { | 
|  | airo_print_err(ai->dev->name, "%s: Write rid Error %d", | 
|  | __FUNCTION__, rc); | 
|  | airo_print_err(ai->dev->name, "%s: Cmd=%04x", | 
|  | __FUNCTION__, cmd.cmd); | 
|  | } | 
|  |  | 
|  | if ((rsp.status & 0x7f00)) | 
|  | rc = rsp.rsp0; | 
|  | } | 
|  | } else { | 
|  | // --- first access so that we can write the rid data | 
|  | if ( (status = PC4500_accessrid(ai, rid, CMD_ACCESS)) != 0) { | 
|  | rc = status; | 
|  | goto done; | 
|  | } | 
|  | // --- now write the rid data | 
|  | if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) { | 
|  | rc = ERROR; | 
|  | goto done; | 
|  | } | 
|  | bap_write(ai, pBuf, len, BAP1); | 
|  | // ---now commit the rid data | 
|  | rc = PC4500_accessrid(ai, rid, 0x100|CMD_ACCESS); | 
|  | } | 
|  | done: | 
|  | if (lock) | 
|  | up(&ai->sem); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Allocates a FID to be used for transmitting packets.  We only use | 
|  | one for now. */ | 
|  | static u16 transmit_allocate(struct airo_info *ai, int lenPayload, int raw) | 
|  | { | 
|  | unsigned int loop = 3000; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | u16 txFid; | 
|  | u16 txControl; | 
|  |  | 
|  | cmd.cmd = CMD_ALLOCATETX; | 
|  | cmd.parm0 = lenPayload; | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return ERROR; | 
|  | if (issuecommand(ai, &cmd, &rsp) != SUCCESS) { | 
|  | txFid = ERROR; | 
|  | goto done; | 
|  | } | 
|  | if ( (rsp.status & 0xFF00) != 0) { | 
|  | txFid = ERROR; | 
|  | goto done; | 
|  | } | 
|  | /* wait for the allocate event/indication | 
|  | * It makes me kind of nervous that this can just sit here and spin, | 
|  | * but in practice it only loops like four times. */ | 
|  | while (((IN4500(ai, EVSTAT) & EV_ALLOC) == 0) && --loop); | 
|  | if (!loop) { | 
|  | txFid = ERROR; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | // get the allocated fid and acknowledge | 
|  | txFid = IN4500(ai, TXALLOCFID); | 
|  | OUT4500(ai, EVACK, EV_ALLOC); | 
|  |  | 
|  | /*  The CARD is pretty cool since it converts the ethernet packet | 
|  | *  into 802.11.  Also note that we don't release the FID since we | 
|  | *  will be using the same one over and over again. */ | 
|  | /*  We only have to setup the control once since we are not | 
|  | *  releasing the fid. */ | 
|  | if (raw) | 
|  | txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_11 | 
|  | | TXCTL_ETHERNET | TXCTL_NORELEASE); | 
|  | else | 
|  | txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_3 | 
|  | | TXCTL_ETHERNET | TXCTL_NORELEASE); | 
|  | if (bap_setup(ai, txFid, 0x0008, BAP1) != SUCCESS) | 
|  | txFid = ERROR; | 
|  | else | 
|  | bap_write(ai, &txControl, sizeof(txControl), BAP1); | 
|  |  | 
|  | done: | 
|  | up(&ai->sem); | 
|  |  | 
|  | return txFid; | 
|  | } | 
|  |  | 
|  | /* In general BAP1 is dedicated to transmiting packets.  However, | 
|  | since we need a BAP when accessing RIDs, we also use BAP1 for that. | 
|  | Make sure the BAP1 spinlock is held when this is called. */ | 
|  | static int transmit_802_3_packet(struct airo_info *ai, int len, char *pPacket) | 
|  | { | 
|  | u16 payloadLen; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | int miclen = 0; | 
|  | u16 txFid = len; | 
|  | MICBuffer pMic; | 
|  |  | 
|  | len >>= 16; | 
|  |  | 
|  | if (len <= ETH_ALEN * 2) { | 
|  | airo_print_warn(ai->dev->name, "Short packet %d", len); | 
|  | return ERROR; | 
|  | } | 
|  | len -= ETH_ALEN * 2; | 
|  |  | 
|  | if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled && | 
|  | (ntohs(((u16 *)pPacket)[6]) != 0x888E)) { | 
|  | if (encapsulate(ai,(etherHead *)pPacket,&pMic,len) != SUCCESS) | 
|  | return ERROR; | 
|  | miclen = sizeof(pMic); | 
|  | } | 
|  | // packet is destination[6], source[6], payload[len-12] | 
|  | // write the payload length and dst/src/payload | 
|  | if (bap_setup(ai, txFid, 0x0036, BAP1) != SUCCESS) return ERROR; | 
|  | /* The hardware addresses aren't counted as part of the payload, so | 
|  | * we have to subtract the 12 bytes for the addresses off */ | 
|  | payloadLen = cpu_to_le16(len + miclen); | 
|  | bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1); | 
|  | bap_write(ai, (const u16*)pPacket, sizeof(etherHead), BAP1); | 
|  | if (miclen) | 
|  | bap_write(ai, (const u16*)&pMic, miclen, BAP1); | 
|  | bap_write(ai, (const u16*)(pPacket + sizeof(etherHead)), len, BAP1); | 
|  | // issue the transmit command | 
|  | memset( &cmd, 0, sizeof( cmd ) ); | 
|  | cmd.cmd = CMD_TRANSMIT; | 
|  | cmd.parm0 = txFid; | 
|  | if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR; | 
|  | if ( (rsp.status & 0xFF00) != 0) return ERROR; | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static int transmit_802_11_packet(struct airo_info *ai, int len, char *pPacket) | 
|  | { | 
|  | u16 fc, payloadLen; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | int hdrlen; | 
|  | struct { | 
|  | u8 addr4[ETH_ALEN]; | 
|  | u16 gaplen; | 
|  | u8 gap[6]; | 
|  | } gap; | 
|  | u16 txFid = len; | 
|  | len >>= 16; | 
|  | gap.gaplen = 6; | 
|  |  | 
|  | fc = le16_to_cpu(*(const u16*)pPacket); | 
|  | switch (fc & 0xc) { | 
|  | case 4: | 
|  | if ((fc & 0xe0) == 0xc0) | 
|  | hdrlen = 10; | 
|  | else | 
|  | hdrlen = 16; | 
|  | break; | 
|  | case 8: | 
|  | if ((fc&0x300)==0x300){ | 
|  | hdrlen = 30; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | hdrlen = 24; | 
|  | } | 
|  |  | 
|  | if (len < hdrlen) { | 
|  | airo_print_warn(ai->dev->name, "Short packet %d", len); | 
|  | return ERROR; | 
|  | } | 
|  |  | 
|  | /* packet is 802.11 header +  payload | 
|  | * write the payload length and dst/src/payload */ | 
|  | if (bap_setup(ai, txFid, 6, BAP1) != SUCCESS) return ERROR; | 
|  | /* The 802.11 header aren't counted as part of the payload, so | 
|  | * we have to subtract the header bytes off */ | 
|  | payloadLen = cpu_to_le16(len-hdrlen); | 
|  | bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1); | 
|  | if (bap_setup(ai, txFid, 0x0014, BAP1) != SUCCESS) return ERROR; | 
|  | bap_write(ai, (const u16*)pPacket, hdrlen, BAP1); | 
|  | bap_write(ai, hdrlen == 30 ? | 
|  | (const u16*)&gap.gaplen : (const u16*)&gap, 38 - hdrlen, BAP1); | 
|  |  | 
|  | bap_write(ai, (const u16*)(pPacket + hdrlen), len - hdrlen, BAP1); | 
|  | // issue the transmit command | 
|  | memset( &cmd, 0, sizeof( cmd ) ); | 
|  | cmd.cmd = CMD_TRANSMIT; | 
|  | cmd.parm0 = txFid; | 
|  | if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR; | 
|  | if ( (rsp.status & 0xFF00) != 0) return ERROR; | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  This is the proc_fs routines.  It is a bit messier than I would | 
|  | *  like!  Feel free to clean it up! | 
|  | */ | 
|  |  | 
|  | static ssize_t proc_read( struct file *file, | 
|  | char __user *buffer, | 
|  | size_t len, | 
|  | loff_t *offset); | 
|  |  | 
|  | static ssize_t proc_write( struct file *file, | 
|  | const char __user *buffer, | 
|  | size_t len, | 
|  | loff_t *offset ); | 
|  | static int proc_close( struct inode *inode, struct file *file ); | 
|  |  | 
|  | static int proc_stats_open( struct inode *inode, struct file *file ); | 
|  | static int proc_statsdelta_open( struct inode *inode, struct file *file ); | 
|  | static int proc_status_open( struct inode *inode, struct file *file ); | 
|  | static int proc_SSID_open( struct inode *inode, struct file *file ); | 
|  | static int proc_APList_open( struct inode *inode, struct file *file ); | 
|  | static int proc_BSSList_open( struct inode *inode, struct file *file ); | 
|  | static int proc_config_open( struct inode *inode, struct file *file ); | 
|  | static int proc_wepkey_open( struct inode *inode, struct file *file ); | 
|  |  | 
|  | static struct file_operations proc_statsdelta_ops = { | 
|  | .read		= proc_read, | 
|  | .open		= proc_statsdelta_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_stats_ops = { | 
|  | .read		= proc_read, | 
|  | .open		= proc_stats_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_status_ops = { | 
|  | .read		= proc_read, | 
|  | .open		= proc_status_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_SSID_ops = { | 
|  | .read		= proc_read, | 
|  | .write		= proc_write, | 
|  | .open		= proc_SSID_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_BSSList_ops = { | 
|  | .read		= proc_read, | 
|  | .write		= proc_write, | 
|  | .open		= proc_BSSList_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_APList_ops = { | 
|  | .read		= proc_read, | 
|  | .write		= proc_write, | 
|  | .open		= proc_APList_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_config_ops = { | 
|  | .read		= proc_read, | 
|  | .write		= proc_write, | 
|  | .open		= proc_config_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct file_operations proc_wepkey_ops = { | 
|  | .read		= proc_read, | 
|  | .write		= proc_write, | 
|  | .open		= proc_wepkey_open, | 
|  | .release	= proc_close | 
|  | }; | 
|  |  | 
|  | static struct proc_dir_entry *airo_entry; | 
|  |  | 
|  | struct proc_data { | 
|  | int release_buffer; | 
|  | int readlen; | 
|  | char *rbuffer; | 
|  | int writelen; | 
|  | int maxwritelen; | 
|  | char *wbuffer; | 
|  | void (*on_close) (struct inode *, struct file *); | 
|  | }; | 
|  |  | 
|  | #ifndef SETPROC_OPS | 
|  | #define SETPROC_OPS(entry, ops) (entry)->proc_fops = &(ops) | 
|  | #endif | 
|  |  | 
|  | static int setup_proc_entry( struct net_device *dev, | 
|  | struct airo_info *apriv ) { | 
|  | struct proc_dir_entry *entry; | 
|  | /* First setup the device directory */ | 
|  | strcpy(apriv->proc_name,dev->name); | 
|  | apriv->proc_entry = create_proc_entry(apriv->proc_name, | 
|  | S_IFDIR|airo_perm, | 
|  | airo_entry); | 
|  | apriv->proc_entry->uid = proc_uid; | 
|  | apriv->proc_entry->gid = proc_gid; | 
|  | apriv->proc_entry->owner = THIS_MODULE; | 
|  |  | 
|  | /* Setup the StatsDelta */ | 
|  | entry = create_proc_entry("StatsDelta", | 
|  | S_IFREG | (S_IRUGO&proc_perm), | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_statsdelta_ops); | 
|  |  | 
|  | /* Setup the Stats */ | 
|  | entry = create_proc_entry("Stats", | 
|  | S_IFREG | (S_IRUGO&proc_perm), | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_stats_ops); | 
|  |  | 
|  | /* Setup the Status */ | 
|  | entry = create_proc_entry("Status", | 
|  | S_IFREG | (S_IRUGO&proc_perm), | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_status_ops); | 
|  |  | 
|  | /* Setup the Config */ | 
|  | entry = create_proc_entry("Config", | 
|  | S_IFREG | proc_perm, | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_config_ops); | 
|  |  | 
|  | /* Setup the SSID */ | 
|  | entry = create_proc_entry("SSID", | 
|  | S_IFREG | proc_perm, | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_SSID_ops); | 
|  |  | 
|  | /* Setup the APList */ | 
|  | entry = create_proc_entry("APList", | 
|  | S_IFREG | proc_perm, | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_APList_ops); | 
|  |  | 
|  | /* Setup the BSSList */ | 
|  | entry = create_proc_entry("BSSList", | 
|  | S_IFREG | proc_perm, | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_BSSList_ops); | 
|  |  | 
|  | /* Setup the WepKey */ | 
|  | entry = create_proc_entry("WepKey", | 
|  | S_IFREG | proc_perm, | 
|  | apriv->proc_entry); | 
|  | entry->uid = proc_uid; | 
|  | entry->gid = proc_gid; | 
|  | entry->data = dev; | 
|  | entry->owner = THIS_MODULE; | 
|  | SETPROC_OPS(entry, proc_wepkey_ops); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int takedown_proc_entry( struct net_device *dev, | 
|  | struct airo_info *apriv ) { | 
|  | if ( !apriv->proc_entry->namelen ) return 0; | 
|  | remove_proc_entry("Stats",apriv->proc_entry); | 
|  | remove_proc_entry("StatsDelta",apriv->proc_entry); | 
|  | remove_proc_entry("Status",apriv->proc_entry); | 
|  | remove_proc_entry("Config",apriv->proc_entry); | 
|  | remove_proc_entry("SSID",apriv->proc_entry); | 
|  | remove_proc_entry("APList",apriv->proc_entry); | 
|  | remove_proc_entry("BSSList",apriv->proc_entry); | 
|  | remove_proc_entry("WepKey",apriv->proc_entry); | 
|  | remove_proc_entry(apriv->proc_name,airo_entry); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  What we want from the proc_fs is to be able to efficiently read | 
|  | *  and write the configuration.  To do this, we want to read the | 
|  | *  configuration when the file is opened and write it when the file is | 
|  | *  closed.  So basically we allocate a read buffer at open and fill it | 
|  | *  with data, and allocate a write buffer and read it at close. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  The read routine is generic, it relies on the preallocated rbuffer | 
|  | *  to supply the data. | 
|  | */ | 
|  | static ssize_t proc_read( struct file *file, | 
|  | char __user *buffer, | 
|  | size_t len, | 
|  | loff_t *offset ) | 
|  | { | 
|  | loff_t pos = *offset; | 
|  | struct proc_data *priv = (struct proc_data*)file->private_data; | 
|  |  | 
|  | if (!priv->rbuffer) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pos < 0) | 
|  | return -EINVAL; | 
|  | if (pos >= priv->readlen) | 
|  | return 0; | 
|  | if (len > priv->readlen - pos) | 
|  | len = priv->readlen - pos; | 
|  | if (copy_to_user(buffer, priv->rbuffer + pos, len)) | 
|  | return -EFAULT; | 
|  | *offset = pos + len; | 
|  | return len; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  The write routine is generic, it fills in a preallocated rbuffer | 
|  | *  to supply the data. | 
|  | */ | 
|  | static ssize_t proc_write( struct file *file, | 
|  | const char __user *buffer, | 
|  | size_t len, | 
|  | loff_t *offset ) | 
|  | { | 
|  | loff_t pos = *offset; | 
|  | struct proc_data *priv = (struct proc_data*)file->private_data; | 
|  |  | 
|  | if (!priv->wbuffer) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pos < 0) | 
|  | return -EINVAL; | 
|  | if (pos >= priv->maxwritelen) | 
|  | return 0; | 
|  | if (len > priv->maxwritelen - pos) | 
|  | len = priv->maxwritelen - pos; | 
|  | if (copy_from_user(priv->wbuffer + pos, buffer, len)) | 
|  | return -EFAULT; | 
|  | if ( pos + len > priv->writelen ) | 
|  | priv->writelen = len + file->f_pos; | 
|  | *offset = pos + len; | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static int proc_status_open( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *apriv = dev->priv; | 
|  | CapabilityRid cap_rid; | 
|  | StatusRid status_rid; | 
|  | int i; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | readStatusRid(apriv, &status_rid, 1); | 
|  | readCapabilityRid(apriv, &cap_rid, 1); | 
|  |  | 
|  | i = sprintf(data->rbuffer, "Status: %s%s%s%s%s%s%s%s%s\n", | 
|  | status_rid.mode & 1 ? "CFG ": "", | 
|  | status_rid.mode & 2 ? "ACT ": "", | 
|  | status_rid.mode & 0x10 ? "SYN ": "", | 
|  | status_rid.mode & 0x20 ? "LNK ": "", | 
|  | status_rid.mode & 0x40 ? "LEAP ": "", | 
|  | status_rid.mode & 0x80 ? "PRIV ": "", | 
|  | status_rid.mode & 0x100 ? "KEY ": "", | 
|  | status_rid.mode & 0x200 ? "WEP ": "", | 
|  | status_rid.mode & 0x8000 ? "ERR ": ""); | 
|  | sprintf( data->rbuffer+i, "Mode: %x\n" | 
|  | "Signal Strength: %d\n" | 
|  | "Signal Quality: %d\n" | 
|  | "SSID: %-.*s\n" | 
|  | "AP: %-.16s\n" | 
|  | "Freq: %d\n" | 
|  | "BitRate: %dmbs\n" | 
|  | "Driver Version: %s\n" | 
|  | "Device: %s\nManufacturer: %s\nFirmware Version: %s\n" | 
|  | "Radio type: %x\nCountry: %x\nHardware Version: %x\n" | 
|  | "Software Version: %x\nSoftware Subversion: %x\n" | 
|  | "Boot block version: %x\n", | 
|  | (int)status_rid.mode, | 
|  | (int)status_rid.normalizedSignalStrength, | 
|  | (int)status_rid.signalQuality, | 
|  | (int)status_rid.SSIDlen, | 
|  | status_rid.SSID, | 
|  | status_rid.apName, | 
|  | (int)status_rid.channel, | 
|  | (int)status_rid.currentXmitRate/2, | 
|  | version, | 
|  | cap_rid.prodName, | 
|  | cap_rid.manName, | 
|  | cap_rid.prodVer, | 
|  | cap_rid.radioType, | 
|  | cap_rid.country, | 
|  | cap_rid.hardVer, | 
|  | (int)cap_rid.softVer, | 
|  | (int)cap_rid.softSubVer, | 
|  | (int)cap_rid.bootBlockVer ); | 
|  | data->readlen = strlen( data->rbuffer ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_stats_rid_open(struct inode*, struct file*, u16); | 
|  | static int proc_statsdelta_open( struct inode *inode, | 
|  | struct file *file ) { | 
|  | if (file->f_mode&FMODE_WRITE) { | 
|  | return proc_stats_rid_open(inode, file, RID_STATSDELTACLEAR); | 
|  | } | 
|  | return proc_stats_rid_open(inode, file, RID_STATSDELTA); | 
|  | } | 
|  |  | 
|  | static int proc_stats_open( struct inode *inode, struct file *file ) { | 
|  | return proc_stats_rid_open(inode, file, RID_STATS); | 
|  | } | 
|  |  | 
|  | static int proc_stats_rid_open( struct inode *inode, | 
|  | struct file *file, | 
|  | u16 rid ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *apriv = dev->priv; | 
|  | StatsRid stats; | 
|  | int i, j; | 
|  | u32 *vals = stats.vals; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kmalloc( 4096, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | readStatsRid(apriv, &stats, rid, 1); | 
|  |  | 
|  | j = 0; | 
|  | for(i=0; statsLabels[i]!=(char *)-1 && | 
|  | i*4<stats.len; i++){ | 
|  | if (!statsLabels[i]) continue; | 
|  | if (j+strlen(statsLabels[i])+16>4096) { | 
|  | airo_print_warn(apriv->dev->name, | 
|  | "Potentially disasterous buffer overflow averted!"); | 
|  | break; | 
|  | } | 
|  | j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i], vals[i]); | 
|  | } | 
|  | if (i*4>=stats.len){ | 
|  | airo_print_warn(apriv->dev->name, "Got a short rid"); | 
|  | } | 
|  | data->readlen = j; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int get_dec_u16( char *buffer, int *start, int limit ) { | 
|  | u16 value; | 
|  | int valid = 0; | 
|  | for( value = 0; buffer[*start] >= '0' && | 
|  | buffer[*start] <= '9' && | 
|  | *start < limit; (*start)++ ) { | 
|  | valid = 1; | 
|  | value *= 10; | 
|  | value += buffer[*start] - '0'; | 
|  | } | 
|  | if ( !valid ) return -1; | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static int airo_config_commit(struct net_device *dev, | 
|  | struct iw_request_info *info, void *zwrq, | 
|  | char *extra); | 
|  |  | 
|  | static void proc_config_on_close( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data = file->private_data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | char *line; | 
|  |  | 
|  | if ( !data->writelen ) return; | 
|  |  | 
|  | readConfigRid(ai, 1); | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  |  | 
|  | line = data->wbuffer; | 
|  | while( line[0] ) { | 
|  | /*** Mode processing */ | 
|  | if ( !strncmp( line, "Mode: ", 6 ) ) { | 
|  | line += 6; | 
|  | if ((ai->config.rmode & 0xff) >= RXMODE_RFMON) | 
|  | set_bit (FLAG_RESET, &ai->flags); | 
|  | ai->config.rmode &= 0xfe00; | 
|  | clear_bit (FLAG_802_11, &ai->flags); | 
|  | ai->config.opmode &= 0xFF00; | 
|  | ai->config.scanMode = SCANMODE_ACTIVE; | 
|  | if ( line[0] == 'a' ) { | 
|  | ai->config.opmode |= 0; | 
|  | } else { | 
|  | ai->config.opmode |= 1; | 
|  | if ( line[0] == 'r' ) { | 
|  | ai->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER; | 
|  | ai->config.scanMode = SCANMODE_PASSIVE; | 
|  | set_bit (FLAG_802_11, &ai->flags); | 
|  | } else if ( line[0] == 'y' ) { | 
|  | ai->config.rmode |= RXMODE_RFMON_ANYBSS | RXMODE_DISABLE_802_3_HEADER; | 
|  | ai->config.scanMode = SCANMODE_PASSIVE; | 
|  | set_bit (FLAG_802_11, &ai->flags); | 
|  | } else if ( line[0] == 'l' ) | 
|  | ai->config.rmode |= RXMODE_LANMON; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } | 
|  |  | 
|  | /*** Radio status */ | 
|  | else if (!strncmp(line,"Radio: ", 7)) { | 
|  | line += 7; | 
|  | if (!strncmp(line,"off",3)) { | 
|  | set_bit (FLAG_RADIO_OFF, &ai->flags); | 
|  | } else { | 
|  | clear_bit (FLAG_RADIO_OFF, &ai->flags); | 
|  | } | 
|  | } | 
|  | /*** NodeName processing */ | 
|  | else if ( !strncmp( line, "NodeName: ", 10 ) ) { | 
|  | int j; | 
|  |  | 
|  | line += 10; | 
|  | memset( ai->config.nodeName, 0, 16 ); | 
|  | /* Do the name, assume a space between the mode and node name */ | 
|  | for( j = 0; j < 16 && line[j] != '\n'; j++ ) { | 
|  | ai->config.nodeName[j] = line[j]; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } | 
|  |  | 
|  | /*** PowerMode processing */ | 
|  | else if ( !strncmp( line, "PowerMode: ", 11 ) ) { | 
|  | line += 11; | 
|  | if ( !strncmp( line, "PSPCAM", 6 ) ) { | 
|  | ai->config.powerSaveMode = POWERSAVE_PSPCAM; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "PSP", 3 ) ) { | 
|  | ai->config.powerSaveMode = POWERSAVE_PSP; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else { | 
|  | ai->config.powerSaveMode = POWERSAVE_CAM; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } | 
|  | } else if ( !strncmp( line, "DataRates: ", 11 ) ) { | 
|  | int v, i = 0, k = 0; /* i is index into line, | 
|  | k is index to rates */ | 
|  |  | 
|  | line += 11; | 
|  | while((v = get_dec_u16(line, &i, 3))!=-1) { | 
|  | ai->config.rates[k++] = (u8)v; | 
|  | line += i + 1; | 
|  | i = 0; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "Channel: ", 9 ) ) { | 
|  | int v, i = 0; | 
|  | line += 9; | 
|  | v = get_dec_u16(line, &i, i+3); | 
|  | if ( v != -1 ) { | 
|  | ai->config.channelSet = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } | 
|  | } else if ( !strncmp( line, "XmitPower: ", 11 ) ) { | 
|  | int v, i = 0; | 
|  | line += 11; | 
|  | v = get_dec_u16(line, &i, i+3); | 
|  | if ( v != -1 ) { | 
|  | ai->config.txPower = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } | 
|  | } else if ( !strncmp( line, "WEP: ", 5 ) ) { | 
|  | line += 5; | 
|  | switch( line[0] ) { | 
|  | case 's': | 
|  | ai->config.authType = (u16)AUTH_SHAREDKEY; | 
|  | break; | 
|  | case 'e': | 
|  | ai->config.authType = (u16)AUTH_ENCRYPT; | 
|  | break; | 
|  | default: | 
|  | ai->config.authType = (u16)AUTH_OPEN; | 
|  | break; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "LongRetryLimit: ", 16 ) ) { | 
|  | int v, i = 0; | 
|  |  | 
|  | line += 16; | 
|  | v = get_dec_u16(line, &i, 3); | 
|  | v = (v<0) ? 0 : ((v>255) ? 255 : v); | 
|  | ai->config.longRetryLimit = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "ShortRetryLimit: ", 17 ) ) { | 
|  | int v, i = 0; | 
|  |  | 
|  | line += 17; | 
|  | v = get_dec_u16(line, &i, 3); | 
|  | v = (v<0) ? 0 : ((v>255) ? 255 : v); | 
|  | ai->config.shortRetryLimit = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "RTSThreshold: ", 14 ) ) { | 
|  | int v, i = 0; | 
|  |  | 
|  | line += 14; | 
|  | v = get_dec_u16(line, &i, 4); | 
|  | v = (v<0) ? 0 : ((v>AIRO_DEF_MTU) ? AIRO_DEF_MTU : v); | 
|  | ai->config.rtsThres = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "TXMSDULifetime: ", 16 ) ) { | 
|  | int v, i = 0; | 
|  |  | 
|  | line += 16; | 
|  | v = get_dec_u16(line, &i, 5); | 
|  | v = (v<0) ? 0 : v; | 
|  | ai->config.txLifetime = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "RXMSDULifetime: ", 16 ) ) { | 
|  | int v, i = 0; | 
|  |  | 
|  | line += 16; | 
|  | v = get_dec_u16(line, &i, 5); | 
|  | v = (v<0) ? 0 : v; | 
|  | ai->config.rxLifetime = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "TXDiversity: ", 13 ) ) { | 
|  | ai->config.txDiversity = | 
|  | (line[13]=='l') ? 1 : | 
|  | ((line[13]=='r')? 2: 3); | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "RXDiversity: ", 13 ) ) { | 
|  | ai->config.rxDiversity = | 
|  | (line[13]=='l') ? 1 : | 
|  | ((line[13]=='r')? 2: 3); | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if ( !strncmp( line, "FragThreshold: ", 15 ) ) { | 
|  | int v, i = 0; | 
|  |  | 
|  | line += 15; | 
|  | v = get_dec_u16(line, &i, 4); | 
|  | v = (v<256) ? 256 : ((v>AIRO_DEF_MTU) ? AIRO_DEF_MTU : v); | 
|  | v = v & 0xfffe; /* Make sure its even */ | 
|  | ai->config.fragThresh = (u16)v; | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | } else if (!strncmp(line, "Modulation: ", 12)) { | 
|  | line += 12; | 
|  | switch(*line) { | 
|  | case 'd':  ai->config.modulation=MOD_DEFAULT; set_bit(FLAG_COMMIT, &ai->flags); break; | 
|  | case 'c':  ai->config.modulation=MOD_CCK; set_bit(FLAG_COMMIT, &ai->flags); break; | 
|  | case 'm':  ai->config.modulation=MOD_MOK; set_bit(FLAG_COMMIT, &ai->flags); break; | 
|  | default: airo_print_warn(ai->dev->name, "Unknown modulation"); | 
|  | } | 
|  | } else if (!strncmp(line, "Preamble: ", 10)) { | 
|  | line += 10; | 
|  | switch(*line) { | 
|  | case 'a': ai->config.preamble=PREAMBLE_AUTO; set_bit(FLAG_COMMIT, &ai->flags); break; | 
|  | case 'l': ai->config.preamble=PREAMBLE_LONG; set_bit(FLAG_COMMIT, &ai->flags); break; | 
|  | case 's': ai->config.preamble=PREAMBLE_SHORT; set_bit(FLAG_COMMIT, &ai->flags); break; | 
|  | default: airo_print_warn(ai->dev->name, "Unknown preamble"); | 
|  | } | 
|  | } else { | 
|  | airo_print_warn(ai->dev->name, "Couldn't figure out %s", line); | 
|  | } | 
|  | while( line[0] && line[0] != '\n' ) line++; | 
|  | if ( line[0] ) line++; | 
|  | } | 
|  | airo_config_commit(dev, NULL, NULL, NULL); | 
|  | } | 
|  |  | 
|  | static char *get_rmode(u16 mode) { | 
|  | switch(mode&0xff) { | 
|  | case RXMODE_RFMON:  return "rfmon"; | 
|  | case RXMODE_RFMON_ANYBSS:  return "yna (any) bss rfmon"; | 
|  | case RXMODE_LANMON:  return "lanmon"; | 
|  | } | 
|  | return "ESS"; | 
|  | } | 
|  |  | 
|  | static int proc_config_open( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | int i; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | if ((data->wbuffer = kzalloc( 2048, GFP_KERNEL )) == NULL) { | 
|  | kfree (data->rbuffer); | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->maxwritelen = 2048; | 
|  | data->on_close = proc_config_on_close; | 
|  |  | 
|  | readConfigRid(ai, 1); | 
|  |  | 
|  | i = sprintf( data->rbuffer, | 
|  | "Mode: %s\n" | 
|  | "Radio: %s\n" | 
|  | "NodeName: %-16s\n" | 
|  | "PowerMode: %s\n" | 
|  | "DataRates: %d %d %d %d %d %d %d %d\n" | 
|  | "Channel: %d\n" | 
|  | "XmitPower: %d\n", | 
|  | (ai->config.opmode & 0xFF) == 0 ? "adhoc" : | 
|  | (ai->config.opmode & 0xFF) == 1 ? get_rmode(ai->config.rmode): | 
|  | (ai->config.opmode & 0xFF) == 2 ? "AP" : | 
|  | (ai->config.opmode & 0xFF) == 3 ? "AP RPTR" : "Error", | 
|  | test_bit(FLAG_RADIO_OFF, &ai->flags) ? "off" : "on", | 
|  | ai->config.nodeName, | 
|  | ai->config.powerSaveMode == 0 ? "CAM" : | 
|  | ai->config.powerSaveMode == 1 ? "PSP" : | 
|  | ai->config.powerSaveMode == 2 ? "PSPCAM" : "Error", | 
|  | (int)ai->config.rates[0], | 
|  | (int)ai->config.rates[1], | 
|  | (int)ai->config.rates[2], | 
|  | (int)ai->config.rates[3], | 
|  | (int)ai->config.rates[4], | 
|  | (int)ai->config.rates[5], | 
|  | (int)ai->config.rates[6], | 
|  | (int)ai->config.rates[7], | 
|  | (int)ai->config.channelSet, | 
|  | (int)ai->config.txPower | 
|  | ); | 
|  | sprintf( data->rbuffer + i, | 
|  | "LongRetryLimit: %d\n" | 
|  | "ShortRetryLimit: %d\n" | 
|  | "RTSThreshold: %d\n" | 
|  | "TXMSDULifetime: %d\n" | 
|  | "RXMSDULifetime: %d\n" | 
|  | "TXDiversity: %s\n" | 
|  | "RXDiversity: %s\n" | 
|  | "FragThreshold: %d\n" | 
|  | "WEP: %s\n" | 
|  | "Modulation: %s\n" | 
|  | "Preamble: %s\n", | 
|  | (int)ai->config.longRetryLimit, | 
|  | (int)ai->config.shortRetryLimit, | 
|  | (int)ai->config.rtsThres, | 
|  | (int)ai->config.txLifetime, | 
|  | (int)ai->config.rxLifetime, | 
|  | ai->config.txDiversity == 1 ? "left" : | 
|  | ai->config.txDiversity == 2 ? "right" : "both", | 
|  | ai->config.rxDiversity == 1 ? "left" : | 
|  | ai->config.rxDiversity == 2 ? "right" : "both", | 
|  | (int)ai->config.fragThresh, | 
|  | ai->config.authType == AUTH_ENCRYPT ? "encrypt" : | 
|  | ai->config.authType == AUTH_SHAREDKEY ? "shared" : "open", | 
|  | ai->config.modulation == 0 ? "default" : | 
|  | ai->config.modulation == MOD_CCK ? "cck" : | 
|  | ai->config.modulation == MOD_MOK ? "mok" : "error", | 
|  | ai->config.preamble == PREAMBLE_AUTO ? "auto" : | 
|  | ai->config.preamble == PREAMBLE_LONG ? "long" : | 
|  | ai->config.preamble == PREAMBLE_SHORT ? "short" : "error" | 
|  | ); | 
|  | data->readlen = strlen( data->rbuffer ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void proc_SSID_on_close( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data = (struct proc_data *)file->private_data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | SsidRid SSID_rid; | 
|  | Resp rsp; | 
|  | int i; | 
|  | int offset = 0; | 
|  |  | 
|  | if ( !data->writelen ) return; | 
|  |  | 
|  | memset( &SSID_rid, 0, sizeof( SSID_rid ) ); | 
|  |  | 
|  | for( i = 0; i < 3; i++ ) { | 
|  | int j; | 
|  | for( j = 0; j+offset < data->writelen && j < 32 && | 
|  | data->wbuffer[offset+j] != '\n'; j++ ) { | 
|  | SSID_rid.ssids[i].ssid[j] = data->wbuffer[offset+j]; | 
|  | } | 
|  | if ( j == 0 ) break; | 
|  | SSID_rid.ssids[i].len = j; | 
|  | offset += j; | 
|  | while( data->wbuffer[offset] != '\n' && | 
|  | offset < data->writelen ) offset++; | 
|  | offset++; | 
|  | } | 
|  | if (i) | 
|  | SSID_rid.len = sizeof(SSID_rid); | 
|  | disable_MAC(ai, 1); | 
|  | writeSsidRid(ai, &SSID_rid, 1); | 
|  | enable_MAC(ai, &rsp, 1); | 
|  | } | 
|  |  | 
|  | static inline u8 hexVal(char c) { | 
|  | if (c>='0' && c<='9') return c -= '0'; | 
|  | if (c>='a' && c<='f') return c -= 'a'-10; | 
|  | if (c>='A' && c<='F') return c -= 'A'-10; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void proc_APList_on_close( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data = (struct proc_data *)file->private_data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | APListRid APList_rid; | 
|  | Resp rsp; | 
|  | int i; | 
|  |  | 
|  | if ( !data->writelen ) return; | 
|  |  | 
|  | memset( &APList_rid, 0, sizeof(APList_rid) ); | 
|  | APList_rid.len = sizeof(APList_rid); | 
|  |  | 
|  | for( i = 0; i < 4 && data->writelen >= (i+1)*6*3; i++ ) { | 
|  | int j; | 
|  | for( j = 0; j < 6*3 && data->wbuffer[j+i*6*3]; j++ ) { | 
|  | switch(j%3) { | 
|  | case 0: | 
|  | APList_rid.ap[i][j/3]= | 
|  | hexVal(data->wbuffer[j+i*6*3])<<4; | 
|  | break; | 
|  | case 1: | 
|  | APList_rid.ap[i][j/3]|= | 
|  | hexVal(data->wbuffer[j+i*6*3]); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | disable_MAC(ai, 1); | 
|  | writeAPListRid(ai, &APList_rid, 1); | 
|  | enable_MAC(ai, &rsp, 1); | 
|  | } | 
|  |  | 
|  | /* This function wraps PC4500_writerid with a MAC disable */ | 
|  | static int do_writerid( struct airo_info *ai, u16 rid, const void *rid_data, | 
|  | int len, int dummy ) { | 
|  | int rc; | 
|  | Resp rsp; | 
|  |  | 
|  | disable_MAC(ai, 1); | 
|  | rc = PC4500_writerid(ai, rid, rid_data, len, 1); | 
|  | enable_MAC(ai, &rsp, 1); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Returns the length of the key at the index.  If index == 0xffff | 
|  | * the index of the transmit key is returned.  If the key doesn't exist, | 
|  | * -1 will be returned. | 
|  | */ | 
|  | static int get_wep_key(struct airo_info *ai, u16 index) { | 
|  | WepKeyRid wkr; | 
|  | int rc; | 
|  | u16 lastindex; | 
|  |  | 
|  | rc = readWepKeyRid(ai, &wkr, 1, 1); | 
|  | if (rc == SUCCESS) do { | 
|  | lastindex = wkr.kindex; | 
|  | if (wkr.kindex == index) { | 
|  | if (index == 0xffff) { | 
|  | return wkr.mac[0]; | 
|  | } | 
|  | return wkr.klen; | 
|  | } | 
|  | readWepKeyRid(ai, &wkr, 0, 1); | 
|  | } while(lastindex != wkr.kindex); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static int set_wep_key(struct airo_info *ai, u16 index, | 
|  | const char *key, u16 keylen, int perm, int lock ) { | 
|  | static const unsigned char macaddr[ETH_ALEN] = { 0x01, 0, 0, 0, 0, 0 }; | 
|  | WepKeyRid wkr; | 
|  | Resp rsp; | 
|  |  | 
|  | memset(&wkr, 0, sizeof(wkr)); | 
|  | if (keylen == 0) { | 
|  | // We are selecting which key to use | 
|  | wkr.len = sizeof(wkr); | 
|  | wkr.kindex = 0xffff; | 
|  | wkr.mac[0] = (char)index; | 
|  | if (perm) ai->defindex = (char)index; | 
|  | } else { | 
|  | // We are actually setting the key | 
|  | wkr.len = sizeof(wkr); | 
|  | wkr.kindex = index; | 
|  | wkr.klen = keylen; | 
|  | memcpy( wkr.key, key, keylen ); | 
|  | memcpy( wkr.mac, macaddr, ETH_ALEN ); | 
|  | } | 
|  |  | 
|  | if (perm) disable_MAC(ai, lock); | 
|  | writeWepKeyRid(ai, &wkr, perm, lock); | 
|  | if (perm) enable_MAC(ai, &rsp, lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void proc_wepkey_on_close( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | int i; | 
|  | char key[16]; | 
|  | u16 index = 0; | 
|  | int j = 0; | 
|  |  | 
|  | memset(key, 0, sizeof(key)); | 
|  |  | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ( !data->writelen ) return; | 
|  |  | 
|  | if (data->wbuffer[0] >= '0' && data->wbuffer[0] <= '3' && | 
|  | (data->wbuffer[1] == ' ' || data->wbuffer[1] == '\n')) { | 
|  | index = data->wbuffer[0] - '0'; | 
|  | if (data->wbuffer[1] == '\n') { | 
|  | set_wep_key(ai, index, NULL, 0, 1, 1); | 
|  | return; | 
|  | } | 
|  | j = 2; | 
|  | } else { | 
|  | airo_print_err(ai->dev->name, "WepKey passed invalid key index"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for( i = 0; i < 16*3 && data->wbuffer[i+j]; i++ ) { | 
|  | switch(i%3) { | 
|  | case 0: | 
|  | key[i/3] = hexVal(data->wbuffer[i+j])<<4; | 
|  | break; | 
|  | case 1: | 
|  | key[i/3] |= hexVal(data->wbuffer[i+j]); | 
|  | break; | 
|  | } | 
|  | } | 
|  | set_wep_key(ai, index, key, i/3, 1, 1); | 
|  | } | 
|  |  | 
|  | static int proc_wepkey_open( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | char *ptr; | 
|  | WepKeyRid wkr; | 
|  | u16 lastindex; | 
|  | int j=0; | 
|  | int rc; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | memset(&wkr, 0, sizeof(wkr)); | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kzalloc( 180, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->writelen = 0; | 
|  | data->maxwritelen = 80; | 
|  | if ((data->wbuffer = kzalloc( 80, GFP_KERNEL )) == NULL) { | 
|  | kfree (data->rbuffer); | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->on_close = proc_wepkey_on_close; | 
|  |  | 
|  | ptr = data->rbuffer; | 
|  | strcpy(ptr, "No wep keys\n"); | 
|  | rc = readWepKeyRid(ai, &wkr, 1, 1); | 
|  | if (rc == SUCCESS) do { | 
|  | lastindex = wkr.kindex; | 
|  | if (wkr.kindex == 0xffff) { | 
|  | j += sprintf(ptr+j, "Tx key = %d\n", | 
|  | (int)wkr.mac[0]); | 
|  | } else { | 
|  | j += sprintf(ptr+j, "Key %d set with length = %d\n", | 
|  | (int)wkr.kindex, (int)wkr.klen); | 
|  | } | 
|  | readWepKeyRid(ai, &wkr, 0, 1); | 
|  | } while((lastindex != wkr.kindex) && (j < 180-30)); | 
|  |  | 
|  | data->readlen = strlen( data->rbuffer ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_SSID_open( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | int i; | 
|  | char *ptr; | 
|  | SsidRid SSID_rid; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->writelen = 0; | 
|  | data->maxwritelen = 33*3; | 
|  | if ((data->wbuffer = kzalloc( 33*3, GFP_KERNEL )) == NULL) { | 
|  | kfree (data->rbuffer); | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->on_close = proc_SSID_on_close; | 
|  |  | 
|  | readSsidRid(ai, &SSID_rid); | 
|  | ptr = data->rbuffer; | 
|  | for( i = 0; i < 3; i++ ) { | 
|  | int j; | 
|  | if ( !SSID_rid.ssids[i].len ) break; | 
|  | for( j = 0; j < 32 && | 
|  | j < SSID_rid.ssids[i].len && | 
|  | SSID_rid.ssids[i].ssid[j]; j++ ) { | 
|  | *ptr++ = SSID_rid.ssids[i].ssid[j]; | 
|  | } | 
|  | *ptr++ = '\n'; | 
|  | } | 
|  | *ptr = '\0'; | 
|  | data->readlen = strlen( data->rbuffer ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_APList_open( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | int i; | 
|  | char *ptr; | 
|  | APListRid APList_rid; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->writelen = 0; | 
|  | data->maxwritelen = 4*6*3; | 
|  | if ((data->wbuffer = kzalloc( data->maxwritelen, GFP_KERNEL )) == NULL) { | 
|  | kfree (data->rbuffer); | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->on_close = proc_APList_on_close; | 
|  |  | 
|  | readAPListRid(ai, &APList_rid); | 
|  | ptr = data->rbuffer; | 
|  | for( i = 0; i < 4; i++ ) { | 
|  | // We end when we find a zero MAC | 
|  | if ( !*(int*)APList_rid.ap[i] && | 
|  | !*(int*)&APList_rid.ap[i][2]) break; | 
|  | ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x\n", | 
|  | (int)APList_rid.ap[i][0], | 
|  | (int)APList_rid.ap[i][1], | 
|  | (int)APList_rid.ap[i][2], | 
|  | (int)APList_rid.ap[i][3], | 
|  | (int)APList_rid.ap[i][4], | 
|  | (int)APList_rid.ap[i][5]); | 
|  | } | 
|  | if (i==0) ptr += sprintf(ptr, "Not using specific APs\n"); | 
|  |  | 
|  | *ptr = '\0'; | 
|  | data->readlen = strlen( data->rbuffer ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_BSSList_open( struct inode *inode, struct file *file ) { | 
|  | struct proc_data *data; | 
|  | struct proc_dir_entry *dp = PDE(inode); | 
|  | struct net_device *dev = dp->data; | 
|  | struct airo_info *ai = dev->priv; | 
|  | char *ptr; | 
|  | BSSListRid BSSList_rid; | 
|  | int rc; | 
|  | /* If doLoseSync is not 1, we won't do a Lose Sync */ | 
|  | int doLoseSync = -1; | 
|  |  | 
|  | if ((file->private_data = kzalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | data = (struct proc_data *)file->private_data; | 
|  | if ((data->rbuffer = kmalloc( 1024, GFP_KERNEL )) == NULL) { | 
|  | kfree (file->private_data); | 
|  | return -ENOMEM; | 
|  | } | 
|  | data->writelen = 0; | 
|  | data->maxwritelen = 0; | 
|  | data->wbuffer = NULL; | 
|  | data->on_close = NULL; | 
|  |  | 
|  | if (file->f_mode & FMODE_WRITE) { | 
|  | if (!(file->f_mode & FMODE_READ)) { | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN; | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd=CMD_LISTBSS; | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return -ERESTARTSYS; | 
|  | issuecommand(ai, &cmd, &rsp); | 
|  | up(&ai->sem); | 
|  | data->readlen = 0; | 
|  | return 0; | 
|  | } | 
|  | doLoseSync = 1; | 
|  | } | 
|  | ptr = data->rbuffer; | 
|  | /* There is a race condition here if there are concurrent opens. | 
|  | Since it is a rare condition, we'll just live with it, otherwise | 
|  | we have to add a spin lock... */ | 
|  | rc = readBSSListRid(ai, doLoseSync, &BSSList_rid); | 
|  | while(rc == 0 && BSSList_rid.index != 0xffff) { | 
|  | ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x %*s rssi = %d", | 
|  | (int)BSSList_rid.bssid[0], | 
|  | (int)BSSList_rid.bssid[1], | 
|  | (int)BSSList_rid.bssid[2], | 
|  | (int)BSSList_rid.bssid[3], | 
|  | (int)BSSList_rid.bssid[4], | 
|  | (int)BSSList_rid.bssid[5], | 
|  | (int)BSSList_rid.ssidLen, | 
|  | BSSList_rid.ssid, | 
|  | (int)BSSList_rid.dBm); | 
|  | ptr += sprintf(ptr, " channel = %d %s %s %s %s\n", | 
|  | (int)BSSList_rid.dsChannel, | 
|  | BSSList_rid.cap & CAP_ESS ? "ESS" : "", | 
|  | BSSList_rid.cap & CAP_IBSS ? "adhoc" : "", | 
|  | BSSList_rid.cap & CAP_PRIVACY ? "wep" : "", | 
|  | BSSList_rid.cap & CAP_SHORTHDR ? "shorthdr" : ""); | 
|  | rc = readBSSListRid(ai, 0, &BSSList_rid); | 
|  | } | 
|  | *ptr = '\0'; | 
|  | data->readlen = strlen( data->rbuffer ); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_close( struct inode *inode, struct file *file ) | 
|  | { | 
|  | struct proc_data *data = file->private_data; | 
|  |  | 
|  | if (data->on_close != NULL) | 
|  | data->on_close(inode, file); | 
|  | kfree(data->rbuffer); | 
|  | kfree(data->wbuffer); | 
|  | kfree(data); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct net_device_list { | 
|  | struct net_device *dev; | 
|  | struct net_device_list *next; | 
|  | } *airo_devices; | 
|  |  | 
|  | /* Since the card doesn't automatically switch to the right WEP mode, | 
|  | we will make it do it.  If the card isn't associated, every secs we | 
|  | will switch WEP modes to see if that will help.  If the card is | 
|  | associated we will check every minute to see if anything has | 
|  | changed. */ | 
|  | static void timer_func( struct net_device *dev ) { | 
|  | struct airo_info *apriv = dev->priv; | 
|  | Resp rsp; | 
|  |  | 
|  | /* We don't have a link so try changing the authtype */ | 
|  | readConfigRid(apriv, 0); | 
|  | disable_MAC(apriv, 0); | 
|  | switch(apriv->config.authType) { | 
|  | case AUTH_ENCRYPT: | 
|  | /* So drop to OPEN */ | 
|  | apriv->config.authType = AUTH_OPEN; | 
|  | break; | 
|  | case AUTH_SHAREDKEY: | 
|  | if (apriv->keyindex < auto_wep) { | 
|  | set_wep_key(apriv, apriv->keyindex, NULL, 0, 0, 0); | 
|  | apriv->config.authType = AUTH_SHAREDKEY; | 
|  | apriv->keyindex++; | 
|  | } else { | 
|  | /* Drop to ENCRYPT */ | 
|  | apriv->keyindex = 0; | 
|  | set_wep_key(apriv, apriv->defindex, NULL, 0, 0, 0); | 
|  | apriv->config.authType = AUTH_ENCRYPT; | 
|  | } | 
|  | break; | 
|  | default:  /* We'll escalate to SHAREDKEY */ | 
|  | apriv->config.authType = AUTH_SHAREDKEY; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &apriv->flags); | 
|  | writeConfigRid(apriv, 0); | 
|  | enable_MAC(apriv, &rsp, 0); | 
|  | up(&apriv->sem); | 
|  |  | 
|  | /* Schedule check to see if the change worked */ | 
|  | clear_bit(JOB_AUTOWEP, &apriv->jobs); | 
|  | apriv->expires = RUN_AT(HZ*3); | 
|  | } | 
|  |  | 
|  | static int add_airo_dev( struct net_device *dev ) { | 
|  | struct net_device_list *node = kmalloc( sizeof( *node ), GFP_KERNEL ); | 
|  | if ( !node ) | 
|  | return -ENOMEM; | 
|  |  | 
|  | node->dev = dev; | 
|  | node->next = airo_devices; | 
|  | airo_devices = node; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void del_airo_dev( struct net_device *dev ) { | 
|  | struct net_device_list **p = &airo_devices; | 
|  | while( *p && ( (*p)->dev != dev ) ) | 
|  | p = &(*p)->next; | 
|  | if ( *p && (*p)->dev == dev ) | 
|  | *p = (*p)->next; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | static int __devinit airo_pci_probe(struct pci_dev *pdev, | 
|  | const struct pci_device_id *pent) | 
|  | { | 
|  | struct net_device *dev; | 
|  |  | 
|  | if (pci_enable_device(pdev)) | 
|  | return -ENODEV; | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | if (pdev->device == 0x5000 || pdev->device == 0xa504) | 
|  | dev = _init_airo_card(pdev->irq, pdev->resource[0].start, 0, pdev, &pdev->dev); | 
|  | else | 
|  | dev = _init_airo_card(pdev->irq, pdev->resource[2].start, 0, pdev, &pdev->dev); | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | pci_set_drvdata(pdev, dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __devexit airo_pci_remove(struct pci_dev *pdev) | 
|  | { | 
|  | } | 
|  |  | 
|  | static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct airo_info *ai = dev->priv; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  |  | 
|  | if ((ai->APList == NULL) && | 
|  | (ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | if ((ai->SSID == NULL) && | 
|  | (ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | readAPListRid(ai, ai->APList); | 
|  | readSsidRid(ai, ai->SSID); | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | /* the lock will be released at the end of the resume callback */ | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return -EAGAIN; | 
|  | disable_MAC(ai, 0); | 
|  | netif_device_detach(dev); | 
|  | ai->power = state; | 
|  | cmd.cmd=HOSTSLEEP; | 
|  | issuecommand(ai, &cmd, &rsp); | 
|  |  | 
|  | pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); | 
|  | pci_save_state(pdev); | 
|  | return pci_set_power_state(pdev, pci_choose_state(pdev, state)); | 
|  | } | 
|  |  | 
|  | static int airo_pci_resume(struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata(pdev); | 
|  | struct airo_info *ai = dev->priv; | 
|  | Resp rsp; | 
|  | pci_power_t prev_state = pdev->current_state; | 
|  |  | 
|  | pci_set_power_state(pdev, PCI_D0); | 
|  | pci_restore_state(pdev); | 
|  | pci_enable_wake(pdev, PCI_D0, 0); | 
|  |  | 
|  | if (prev_state != PCI_D1) { | 
|  | reset_card(dev, 0); | 
|  | mpi_init_descriptors(ai); | 
|  | setup_card(ai, dev->dev_addr, 0); | 
|  | clear_bit(FLAG_RADIO_OFF, &ai->flags); | 
|  | clear_bit(FLAG_PENDING_XMIT, &ai->flags); | 
|  | } else { | 
|  | OUT4500(ai, EVACK, EV_AWAKEN); | 
|  | OUT4500(ai, EVACK, EV_AWAKEN); | 
|  | msleep(100); | 
|  | } | 
|  |  | 
|  | set_bit (FLAG_COMMIT, &ai->flags); | 
|  | disable_MAC(ai, 0); | 
|  | msleep(200); | 
|  | if (ai->SSID) { | 
|  | writeSsidRid(ai, ai->SSID, 0); | 
|  | kfree(ai->SSID); | 
|  | ai->SSID = NULL; | 
|  | } | 
|  | if (ai->APList) { | 
|  | writeAPListRid(ai, ai->APList, 0); | 
|  | kfree(ai->APList); | 
|  | ai->APList = NULL; | 
|  | } | 
|  | writeConfigRid(ai, 0); | 
|  | enable_MAC(ai, &rsp, 0); | 
|  | ai->power = PMSG_ON; | 
|  | netif_device_attach(dev); | 
|  | netif_wake_queue(dev); | 
|  | enable_interrupts(ai); | 
|  | up(&ai->sem); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int __init airo_init_module( void ) | 
|  | { | 
|  | int i, have_isa_dev = 0; | 
|  |  | 
|  | airo_entry = create_proc_entry("aironet", | 
|  | S_IFDIR | airo_perm, | 
|  | proc_root_driver); | 
|  | airo_entry->uid = proc_uid; | 
|  | airo_entry->gid = proc_gid; | 
|  |  | 
|  | for( i = 0; i < 4 && io[i] && irq[i]; i++ ) { | 
|  | airo_print_info("", "Trying to configure ISA adapter at irq=%d " | 
|  | "io=0x%x", irq[i], io[i] ); | 
|  | if (init_airo_card( irq[i], io[i], 0, NULL )) | 
|  | have_isa_dev = 1; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | airo_print_info("", "Probing for PCI adapters"); | 
|  | pci_register_driver(&airo_driver); | 
|  | airo_print_info("", "Finished probing for PCI adapters"); | 
|  | #endif | 
|  |  | 
|  | /* Always exit with success, as we are a library module | 
|  | * as well as a driver module | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit airo_cleanup_module( void ) | 
|  | { | 
|  | while( airo_devices ) { | 
|  | airo_print_info(airo_devices->dev->name, "Unregistering...\n"); | 
|  | stop_airo_card( airo_devices->dev, 1 ); | 
|  | } | 
|  | #ifdef CONFIG_PCI | 
|  | pci_unregister_driver(&airo_driver); | 
|  | #endif | 
|  | remove_proc_entry("aironet", proc_root_driver); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Initial Wireless Extension code for Aironet driver by : | 
|  | *	Jean Tourrilhes <jt@hpl.hp.com> - HPL - 17 November 00 | 
|  | * Conversion to new driver API by : | 
|  | *	Jean Tourrilhes <jt@hpl.hp.com> - HPL - 26 March 02 | 
|  | * Javier also did a good amount of work here, adding some new extensions | 
|  | * and fixing my code. Let's just say that without him this code just | 
|  | * would not work at all... - Jean II | 
|  | */ | 
|  |  | 
|  | static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi) | 
|  | { | 
|  | if( !rssi_rid ) | 
|  | return 0; | 
|  |  | 
|  | return (0x100 - rssi_rid[rssi].rssidBm); | 
|  | } | 
|  |  | 
|  | static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if( !rssi_rid ) | 
|  | return 0; | 
|  |  | 
|  | for( i = 0; i < 256; i++ ) | 
|  | if (rssi_rid[i].rssidBm == dbm) | 
|  | return rssi_rid[i].rssipct; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid) | 
|  | { | 
|  | int quality = 0; | 
|  |  | 
|  | if ((status_rid->mode & 0x3f) == 0x3f && (cap_rid->hardCap & 8)) { | 
|  | if (memcmp(cap_rid->prodName, "350", 3)) | 
|  | if (status_rid->signalQuality > 0x20) | 
|  | quality = 0; | 
|  | else | 
|  | quality = 0x20 - status_rid->signalQuality; | 
|  | else | 
|  | if (status_rid->signalQuality > 0xb0) | 
|  | quality = 0; | 
|  | else if (status_rid->signalQuality < 0x10) | 
|  | quality = 0xa0; | 
|  | else | 
|  | quality = 0xb0 - status_rid->signalQuality; | 
|  | } | 
|  | return quality; | 
|  | } | 
|  |  | 
|  | #define airo_get_max_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x20 : 0xa0) | 
|  | #define airo_get_avg_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x10 : 0x50); | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get protocol name | 
|  | */ | 
|  | static int airo_get_name(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | char *cwrq, | 
|  | char *extra) | 
|  | { | 
|  | strcpy(cwrq, "IEEE 802.11-DS"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set frequency | 
|  | */ | 
|  | static int airo_set_freq(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_freq *fwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int rc = -EINPROGRESS;		/* Call commit handler */ | 
|  |  | 
|  | /* If setting by frequency, convert to a channel */ | 
|  | if((fwrq->e == 1) && | 
|  | (fwrq->m >= (int) 2.412e8) && | 
|  | (fwrq->m <= (int) 2.487e8)) { | 
|  | int f = fwrq->m / 100000; | 
|  | int c = 0; | 
|  | while((c < 14) && (f != frequency_list[c])) | 
|  | c++; | 
|  | /* Hack to fall through... */ | 
|  | fwrq->e = 0; | 
|  | fwrq->m = c + 1; | 
|  | } | 
|  | /* Setting by channel number */ | 
|  | if((fwrq->m > 1000) || (fwrq->e > 0)) | 
|  | rc = -EOPNOTSUPP; | 
|  | else { | 
|  | int channel = fwrq->m; | 
|  | /* We should do a better check than that, | 
|  | * based on the card capability !!! */ | 
|  | if((channel < 1) || (channel > 14)) { | 
|  | airo_print_dbg(dev->name, "New channel value of %d is invalid!", | 
|  | fwrq->m); | 
|  | rc = -EINVAL; | 
|  | } else { | 
|  | readConfigRid(local, 1); | 
|  | /* Yes ! We can set it !!! */ | 
|  | local->config.channelSet = (u16) channel; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | } | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get frequency | 
|  | */ | 
|  | static int airo_get_freq(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_freq *fwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | StatusRid status_rid;		/* Card status info */ | 
|  | int ch; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | if ((local->config.opmode & 0xFF) == MODE_STA_ESS) | 
|  | status_rid.channel = local->config.channelSet; | 
|  | else | 
|  | readStatusRid(local, &status_rid, 1); | 
|  |  | 
|  | ch = (int)status_rid.channel; | 
|  | if((ch > 0) && (ch < 15)) { | 
|  | fwrq->m = frequency_list[ch - 1] * 100000; | 
|  | fwrq->e = 1; | 
|  | } else { | 
|  | fwrq->m = ch; | 
|  | fwrq->e = 0; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set ESSID | 
|  | */ | 
|  | static int airo_set_essid(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | Resp rsp; | 
|  | SsidRid SSID_rid;		/* SSIDs */ | 
|  |  | 
|  | /* Reload the list of current SSID */ | 
|  | readSsidRid(local, &SSID_rid); | 
|  |  | 
|  | /* Check if we asked for `any' */ | 
|  | if(dwrq->flags == 0) { | 
|  | /* Just send an empty SSID list */ | 
|  | memset(&SSID_rid, 0, sizeof(SSID_rid)); | 
|  | } else { | 
|  | int	index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
|  |  | 
|  | /* Check the size of the string */ | 
|  | if(dwrq->length > IW_ESSID_MAX_SIZE+1) { | 
|  | return -E2BIG ; | 
|  | } | 
|  | /* Check if index is valid */ | 
|  | if((index < 0) || (index >= 4)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Set the SSID */ | 
|  | memset(SSID_rid.ssids[index].ssid, 0, | 
|  | sizeof(SSID_rid.ssids[index].ssid)); | 
|  | memcpy(SSID_rid.ssids[index].ssid, extra, dwrq->length); | 
|  | SSID_rid.ssids[index].len = dwrq->length - 1; | 
|  | } | 
|  | SSID_rid.len = sizeof(SSID_rid); | 
|  | /* Write it to the card */ | 
|  | disable_MAC(local, 1); | 
|  | writeSsidRid(local, &SSID_rid, 1); | 
|  | enable_MAC(local, &rsp, 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get ESSID | 
|  | */ | 
|  | static int airo_get_essid(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | StatusRid status_rid;		/* Card status info */ | 
|  |  | 
|  | readStatusRid(local, &status_rid, 1); | 
|  |  | 
|  | /* Note : if dwrq->flags != 0, we should | 
|  | * get the relevant SSID from the SSID list... */ | 
|  |  | 
|  | /* Get the current SSID */ | 
|  | memcpy(extra, status_rid.SSID, status_rid.SSIDlen); | 
|  | extra[status_rid.SSIDlen] = '\0'; | 
|  | /* If none, we may want to get the one that was set */ | 
|  |  | 
|  | /* Push it out ! */ | 
|  | dwrq->length = status_rid.SSIDlen; | 
|  | dwrq->flags = 1; /* active */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set AP address | 
|  | */ | 
|  | static int airo_set_wap(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct sockaddr *awrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | APListRid APList_rid; | 
|  | static const u8 any[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; | 
|  | static const u8 off[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; | 
|  |  | 
|  | if (awrq->sa_family != ARPHRD_ETHER) | 
|  | return -EINVAL; | 
|  | else if (!memcmp(any, awrq->sa_data, ETH_ALEN) || | 
|  | !memcmp(off, awrq->sa_data, ETH_ALEN)) { | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd=CMD_LOSE_SYNC; | 
|  | if (down_interruptible(&local->sem)) | 
|  | return -ERESTARTSYS; | 
|  | issuecommand(local, &cmd, &rsp); | 
|  | up(&local->sem); | 
|  | } else { | 
|  | memset(&APList_rid, 0, sizeof(APList_rid)); | 
|  | APList_rid.len = sizeof(APList_rid); | 
|  | memcpy(APList_rid.ap[0], awrq->sa_data, ETH_ALEN); | 
|  | disable_MAC(local, 1); | 
|  | writeAPListRid(local, &APList_rid, 1); | 
|  | enable_MAC(local, &rsp, 1); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get AP address | 
|  | */ | 
|  | static int airo_get_wap(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct sockaddr *awrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | StatusRid status_rid;		/* Card status info */ | 
|  |  | 
|  | readStatusRid(local, &status_rid, 1); | 
|  |  | 
|  | /* Tentative. This seems to work, wow, I'm lucky !!! */ | 
|  | memcpy(awrq->sa_data, status_rid.bssid[0], ETH_ALEN); | 
|  | awrq->sa_family = ARPHRD_ETHER; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Nickname | 
|  | */ | 
|  | static int airo_set_nick(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | /* Check the size of the string */ | 
|  | if(dwrq->length > 16 + 1) { | 
|  | return -E2BIG; | 
|  | } | 
|  | readConfigRid(local, 1); | 
|  | memset(local->config.nodeName, 0, sizeof(local->config.nodeName)); | 
|  | memcpy(local->config.nodeName, extra, dwrq->length); | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Nickname | 
|  | */ | 
|  | static int airo_get_nick(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | strncpy(extra, local->config.nodeName, 16); | 
|  | extra[16] = '\0'; | 
|  | dwrq->length = strlen(extra) + 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Bit-Rate | 
|  | */ | 
|  | static int airo_set_rate(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  | u8	brate = 0; | 
|  | int	i; | 
|  |  | 
|  | /* First : get a valid bit rate value */ | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  |  | 
|  | /* Which type of value ? */ | 
|  | if((vwrq->value < 8) && (vwrq->value >= 0)) { | 
|  | /* Setting by rate index */ | 
|  | /* Find value in the magic rate table */ | 
|  | brate = cap_rid.supportedRates[vwrq->value]; | 
|  | } else { | 
|  | /* Setting by frequency value */ | 
|  | u8	normvalue = (u8) (vwrq->value/500000); | 
|  |  | 
|  | /* Check if rate is valid */ | 
|  | for(i = 0 ; i < 8 ; i++) { | 
|  | if(normvalue == cap_rid.supportedRates[i]) { | 
|  | brate = normvalue; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | /* -1 designed the max rate (mostly auto mode) */ | 
|  | if(vwrq->value == -1) { | 
|  | /* Get the highest available rate */ | 
|  | for(i = 0 ; i < 8 ; i++) { | 
|  | if(cap_rid.supportedRates[i] == 0) | 
|  | break; | 
|  | } | 
|  | if(i != 0) | 
|  | brate = cap_rid.supportedRates[i - 1]; | 
|  | } | 
|  | /* Check that it is valid */ | 
|  | if(brate == 0) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | /* Now, check if we want a fixed or auto value */ | 
|  | if(vwrq->fixed == 0) { | 
|  | /* Fill all the rates up to this max rate */ | 
|  | memset(local->config.rates, 0, 8); | 
|  | for(i = 0 ; i < 8 ; i++) { | 
|  | local->config.rates[i] = cap_rid.supportedRates[i]; | 
|  | if(local->config.rates[i] == brate) | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | /* Fixed mode */ | 
|  | /* One rate, fixed */ | 
|  | memset(local->config.rates, 0, 8); | 
|  | local->config.rates[0] = brate; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Bit-Rate | 
|  | */ | 
|  | static int airo_get_rate(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | StatusRid status_rid;		/* Card status info */ | 
|  |  | 
|  | readStatusRid(local, &status_rid, 1); | 
|  |  | 
|  | vwrq->value = status_rid.currentXmitRate * 500000; | 
|  | /* If more than one rate, set auto */ | 
|  | readConfigRid(local, 1); | 
|  | vwrq->fixed = (local->config.rates[1] == 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set RTS threshold | 
|  | */ | 
|  | static int airo_set_rts(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int rthr = vwrq->value; | 
|  |  | 
|  | if(vwrq->disabled) | 
|  | rthr = AIRO_DEF_MTU; | 
|  | if((rthr < 0) || (rthr > AIRO_DEF_MTU)) { | 
|  | return -EINVAL; | 
|  | } | 
|  | readConfigRid(local, 1); | 
|  | local->config.rtsThres = rthr; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get RTS threshold | 
|  | */ | 
|  | static int airo_get_rts(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | vwrq->value = local->config.rtsThres; | 
|  | vwrq->disabled = (vwrq->value >= AIRO_DEF_MTU); | 
|  | vwrq->fixed = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Fragmentation threshold | 
|  | */ | 
|  | static int airo_set_frag(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int fthr = vwrq->value; | 
|  |  | 
|  | if(vwrq->disabled) | 
|  | fthr = AIRO_DEF_MTU; | 
|  | if((fthr < 256) || (fthr > AIRO_DEF_MTU)) { | 
|  | return -EINVAL; | 
|  | } | 
|  | fthr &= ~0x1;	/* Get an even value - is it really needed ??? */ | 
|  | readConfigRid(local, 1); | 
|  | local->config.fragThresh = (u16)fthr; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Fragmentation threshold | 
|  | */ | 
|  | static int airo_get_frag(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | vwrq->value = local->config.fragThresh; | 
|  | vwrq->disabled = (vwrq->value >= AIRO_DEF_MTU); | 
|  | vwrq->fixed = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Mode of Operation | 
|  | */ | 
|  | static int airo_set_mode(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | __u32 *uwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int reset = 0; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | if ((local->config.rmode & 0xff) >= RXMODE_RFMON) | 
|  | reset = 1; | 
|  |  | 
|  | switch(*uwrq) { | 
|  | case IW_MODE_ADHOC: | 
|  | local->config.opmode &= 0xFF00; | 
|  | local->config.opmode |= MODE_STA_IBSS; | 
|  | local->config.rmode &= 0xfe00; | 
|  | local->config.scanMode = SCANMODE_ACTIVE; | 
|  | clear_bit (FLAG_802_11, &local->flags); | 
|  | break; | 
|  | case IW_MODE_INFRA: | 
|  | local->config.opmode &= 0xFF00; | 
|  | local->config.opmode |= MODE_STA_ESS; | 
|  | local->config.rmode &= 0xfe00; | 
|  | local->config.scanMode = SCANMODE_ACTIVE; | 
|  | clear_bit (FLAG_802_11, &local->flags); | 
|  | break; | 
|  | case IW_MODE_MASTER: | 
|  | local->config.opmode &= 0xFF00; | 
|  | local->config.opmode |= MODE_AP; | 
|  | local->config.rmode &= 0xfe00; | 
|  | local->config.scanMode = SCANMODE_ACTIVE; | 
|  | clear_bit (FLAG_802_11, &local->flags); | 
|  | break; | 
|  | case IW_MODE_REPEAT: | 
|  | local->config.opmode &= 0xFF00; | 
|  | local->config.opmode |= MODE_AP_RPTR; | 
|  | local->config.rmode &= 0xfe00; | 
|  | local->config.scanMode = SCANMODE_ACTIVE; | 
|  | clear_bit (FLAG_802_11, &local->flags); | 
|  | break; | 
|  | case IW_MODE_MONITOR: | 
|  | local->config.opmode &= 0xFF00; | 
|  | local->config.opmode |= MODE_STA_ESS; | 
|  | local->config.rmode &= 0xfe00; | 
|  | local->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER; | 
|  | local->config.scanMode = SCANMODE_PASSIVE; | 
|  | set_bit (FLAG_802_11, &local->flags); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | if (reset) | 
|  | set_bit (FLAG_RESET, &local->flags); | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Mode of Operation | 
|  | */ | 
|  | static int airo_get_mode(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | __u32 *uwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | /* If not managed, assume it's ad-hoc */ | 
|  | switch (local->config.opmode & 0xFF) { | 
|  | case MODE_STA_ESS: | 
|  | *uwrq = IW_MODE_INFRA; | 
|  | break; | 
|  | case MODE_AP: | 
|  | *uwrq = IW_MODE_MASTER; | 
|  | break; | 
|  | case MODE_AP_RPTR: | 
|  | *uwrq = IW_MODE_REPEAT; | 
|  | break; | 
|  | default: | 
|  | *uwrq = IW_MODE_ADHOC; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Encryption Key | 
|  | */ | 
|  | static int airo_set_encode(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  | int perm = ( dwrq->flags & IW_ENCODE_TEMP ? 0 : 1 ); | 
|  | u16 currentAuthType = local->config.authType; | 
|  |  | 
|  | /* Is WEP supported ? */ | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  | /* Older firmware doesn't support this... | 
|  | if(!(cap_rid.softCap & 2)) { | 
|  | return -EOPNOTSUPP; | 
|  | } */ | 
|  | readConfigRid(local, 1); | 
|  |  | 
|  | /* Basic checking: do we have a key to set ? | 
|  | * Note : with the new API, it's impossible to get a NULL pointer. | 
|  | * Therefore, we need to check a key size == 0 instead. | 
|  | * New version of iwconfig properly set the IW_ENCODE_NOKEY flag | 
|  | * when no key is present (only change flags), but older versions | 
|  | * don't do it. - Jean II */ | 
|  | if (dwrq->length > 0) { | 
|  | wep_key_t key; | 
|  | int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
|  | int current_index = get_wep_key(local, 0xffff); | 
|  | /* Check the size of the key */ | 
|  | if (dwrq->length > MAX_KEY_SIZE) { | 
|  | return -EINVAL; | 
|  | } | 
|  | /* Check the index (none -> use current) */ | 
|  | if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4:1))) | 
|  | index = current_index; | 
|  | /* Set the length */ | 
|  | if (dwrq->length > MIN_KEY_SIZE) | 
|  | key.len = MAX_KEY_SIZE; | 
|  | else | 
|  | if (dwrq->length > 0) | 
|  | key.len = MIN_KEY_SIZE; | 
|  | else | 
|  | /* Disable the key */ | 
|  | key.len = 0; | 
|  | /* Check if the key is not marked as invalid */ | 
|  | if(!(dwrq->flags & IW_ENCODE_NOKEY)) { | 
|  | /* Cleanup */ | 
|  | memset(key.key, 0, MAX_KEY_SIZE); | 
|  | /* Copy the key in the driver */ | 
|  | memcpy(key.key, extra, dwrq->length); | 
|  | /* Send the key to the card */ | 
|  | set_wep_key(local, index, key.key, key.len, perm, 1); | 
|  | } | 
|  | /* WE specify that if a valid key is set, encryption | 
|  | * should be enabled (user may turn it off later) | 
|  | * This is also how "iwconfig ethX key on" works */ | 
|  | if((index == current_index) && (key.len > 0) && | 
|  | (local->config.authType == AUTH_OPEN)) { | 
|  | local->config.authType = AUTH_ENCRYPT; | 
|  | } | 
|  | } else { | 
|  | /* Do we want to just set the transmit key index ? */ | 
|  | int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
|  | if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) { | 
|  | set_wep_key(local, index, NULL, 0, perm, 1); | 
|  | } else | 
|  | /* Don't complain if only change the mode */ | 
|  | if(!dwrq->flags & IW_ENCODE_MODE) { | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  | /* Read the flags */ | 
|  | if(dwrq->flags & IW_ENCODE_DISABLED) | 
|  | local->config.authType = AUTH_OPEN;	// disable encryption | 
|  | if(dwrq->flags & IW_ENCODE_RESTRICTED) | 
|  | local->config.authType = AUTH_SHAREDKEY;	// Only Both | 
|  | if(dwrq->flags & IW_ENCODE_OPEN) | 
|  | local->config.authType = AUTH_ENCRYPT;	// Only Wep | 
|  | /* Commit the changes to flags if needed */ | 
|  | if (local->config.authType != currentAuthType) | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Encryption Key | 
|  | */ | 
|  | static int airo_get_encode(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  |  | 
|  | /* Is it supported ? */ | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  | if(!(cap_rid.softCap & 2)) { | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | readConfigRid(local, 1); | 
|  | /* Check encryption mode */ | 
|  | switch(local->config.authType)	{ | 
|  | case AUTH_ENCRYPT: | 
|  | dwrq->flags = IW_ENCODE_OPEN; | 
|  | break; | 
|  | case AUTH_SHAREDKEY: | 
|  | dwrq->flags = IW_ENCODE_RESTRICTED; | 
|  | break; | 
|  | default: | 
|  | case AUTH_OPEN: | 
|  | dwrq->flags = IW_ENCODE_DISABLED; | 
|  | break; | 
|  | } | 
|  | /* We can't return the key, so set the proper flag and return zero */ | 
|  | dwrq->flags |= IW_ENCODE_NOKEY; | 
|  | memset(extra, 0, 16); | 
|  |  | 
|  | /* Which key do we want ? -1 -> tx index */ | 
|  | if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4 : 1))) | 
|  | index = get_wep_key(local, 0xffff); | 
|  | dwrq->flags |= index + 1; | 
|  | /* Copy the key to the user buffer */ | 
|  | dwrq->length = get_wep_key(local, index); | 
|  | if (dwrq->length > 16) { | 
|  | dwrq->length=0; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set extended Encryption parameters | 
|  | */ | 
|  | static int airo_set_encodeext(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | struct iw_point *encoding = &wrqu->encoding; | 
|  | struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  | int perm = ( encoding->flags & IW_ENCODE_TEMP ? 0 : 1 ); | 
|  | u16 currentAuthType = local->config.authType; | 
|  | int idx, key_len, alg = ext->alg, set_key = 1; | 
|  | wep_key_t key; | 
|  |  | 
|  | /* Is WEP supported ? */ | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  | /* Older firmware doesn't support this... | 
|  | if(!(cap_rid.softCap & 2)) { | 
|  | return -EOPNOTSUPP; | 
|  | } */ | 
|  | readConfigRid(local, 1); | 
|  |  | 
|  | /* Determine and validate the key index */ | 
|  | idx = encoding->flags & IW_ENCODE_INDEX; | 
|  | if (idx) { | 
|  | if (idx < 1 || idx > ((cap_rid.softCap & 0x80) ? 4:1)) | 
|  | return -EINVAL; | 
|  | idx--; | 
|  | } else | 
|  | idx = get_wep_key(local, 0xffff); | 
|  |  | 
|  | if (encoding->flags & IW_ENCODE_DISABLED) | 
|  | alg = IW_ENCODE_ALG_NONE; | 
|  |  | 
|  | if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { | 
|  | /* Only set transmit key index here, actual | 
|  | * key is set below if needed. | 
|  | */ | 
|  | set_wep_key(local, idx, NULL, 0, perm, 1); | 
|  | set_key = ext->key_len > 0 ? 1 : 0; | 
|  | } | 
|  |  | 
|  | if (set_key) { | 
|  | /* Set the requested key first */ | 
|  | memset(key.key, 0, MAX_KEY_SIZE); | 
|  | switch (alg) { | 
|  | case IW_ENCODE_ALG_NONE: | 
|  | key.len = 0; | 
|  | break; | 
|  | case IW_ENCODE_ALG_WEP: | 
|  | if (ext->key_len > MIN_KEY_SIZE) { | 
|  | key.len = MAX_KEY_SIZE; | 
|  | } else if (ext->key_len > 0) { | 
|  | key.len = MIN_KEY_SIZE; | 
|  | } else { | 
|  | return -EINVAL; | 
|  | } | 
|  | key_len = min (ext->key_len, key.len); | 
|  | memcpy(key.key, ext->key, key_len); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | /* Send the key to the card */ | 
|  | set_wep_key(local, idx, key.key, key.len, perm, 1); | 
|  | } | 
|  |  | 
|  | /* Read the flags */ | 
|  | if(encoding->flags & IW_ENCODE_DISABLED) | 
|  | local->config.authType = AUTH_OPEN;	// disable encryption | 
|  | if(encoding->flags & IW_ENCODE_RESTRICTED) | 
|  | local->config.authType = AUTH_SHAREDKEY;	// Only Both | 
|  | if(encoding->flags & IW_ENCODE_OPEN) | 
|  | local->config.authType = AUTH_ENCRYPT;	// Only Wep | 
|  | /* Commit the changes to flags if needed */ | 
|  | if (local->config.authType != currentAuthType) | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get extended Encryption parameters | 
|  | */ | 
|  | static int airo_get_encodeext(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | struct iw_point *encoding = &wrqu->encoding; | 
|  | struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  | int idx, max_key_len; | 
|  |  | 
|  | /* Is it supported ? */ | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  | if(!(cap_rid.softCap & 2)) { | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | readConfigRid(local, 1); | 
|  |  | 
|  | max_key_len = encoding->length - sizeof(*ext); | 
|  | if (max_key_len < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | idx = encoding->flags & IW_ENCODE_INDEX; | 
|  | if (idx) { | 
|  | if (idx < 1 || idx > ((cap_rid.softCap & 0x80) ? 4:1)) | 
|  | return -EINVAL; | 
|  | idx--; | 
|  | } else | 
|  | idx = get_wep_key(local, 0xffff); | 
|  |  | 
|  | encoding->flags = idx + 1; | 
|  | memset(ext, 0, sizeof(*ext)); | 
|  |  | 
|  | /* Check encryption mode */ | 
|  | switch(local->config.authType) { | 
|  | case AUTH_ENCRYPT: | 
|  | encoding->flags = IW_ENCODE_ALG_WEP | IW_ENCODE_ENABLED; | 
|  | break; | 
|  | case AUTH_SHAREDKEY: | 
|  | encoding->flags = IW_ENCODE_ALG_WEP | IW_ENCODE_ENABLED; | 
|  | break; | 
|  | default: | 
|  | case AUTH_OPEN: | 
|  | encoding->flags = IW_ENCODE_ALG_NONE | IW_ENCODE_DISABLED; | 
|  | break; | 
|  | } | 
|  | /* We can't return the key, so set the proper flag and return zero */ | 
|  | encoding->flags |= IW_ENCODE_NOKEY; | 
|  | memset(extra, 0, 16); | 
|  |  | 
|  | /* Copy the key to the user buffer */ | 
|  | ext->key_len = get_wep_key(local, idx); | 
|  | if (ext->key_len > 16) { | 
|  | ext->key_len=0; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set extended authentication parameters | 
|  | */ | 
|  | static int airo_set_auth(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | struct iw_param *param = &wrqu->param; | 
|  | u16 currentAuthType = local->config.authType; | 
|  |  | 
|  | switch (param->flags & IW_AUTH_INDEX) { | 
|  | case IW_AUTH_WPA_VERSION: | 
|  | case IW_AUTH_CIPHER_PAIRWISE: | 
|  | case IW_AUTH_CIPHER_GROUP: | 
|  | case IW_AUTH_KEY_MGMT: | 
|  | case IW_AUTH_RX_UNENCRYPTED_EAPOL: | 
|  | case IW_AUTH_PRIVACY_INVOKED: | 
|  | /* | 
|  | * airo does not use these parameters | 
|  | */ | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_DROP_UNENCRYPTED: | 
|  | if (param->value) { | 
|  | /* Only change auth type if unencrypted */ | 
|  | if (currentAuthType == AUTH_OPEN) | 
|  | local->config.authType = AUTH_ENCRYPT; | 
|  | } else { | 
|  | local->config.authType = AUTH_OPEN; | 
|  | } | 
|  |  | 
|  | /* Commit the changes to flags if needed */ | 
|  | if (local->config.authType != currentAuthType) | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_80211_AUTH_ALG: { | 
|  | /* FIXME: What about AUTH_OPEN?  This API seems to | 
|  | * disallow setting our auth to AUTH_OPEN. | 
|  | */ | 
|  | if (param->value & IW_AUTH_ALG_SHARED_KEY) { | 
|  | local->config.authType = AUTH_SHAREDKEY; | 
|  | } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) { | 
|  | local->config.authType = AUTH_ENCRYPT; | 
|  | } else | 
|  | return -EINVAL; | 
|  | break; | 
|  |  | 
|  | /* Commit the changes to flags if needed */ | 
|  | if (local->config.authType != currentAuthType) | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | } | 
|  |  | 
|  | case IW_AUTH_WPA_ENABLED: | 
|  | /* Silently accept disable of WPA */ | 
|  | if (param->value > 0) | 
|  | return -EOPNOTSUPP; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | return -EINPROGRESS; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get extended authentication parameters | 
|  | */ | 
|  | static int airo_get_auth(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | struct iw_param *param = &wrqu->param; | 
|  | u16 currentAuthType = local->config.authType; | 
|  |  | 
|  | switch (param->flags & IW_AUTH_INDEX) { | 
|  | case IW_AUTH_DROP_UNENCRYPTED: | 
|  | switch (currentAuthType) { | 
|  | case AUTH_SHAREDKEY: | 
|  | case AUTH_ENCRYPT: | 
|  | param->value = 1; | 
|  | break; | 
|  | default: | 
|  | param->value = 0; | 
|  | break; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_80211_AUTH_ALG: | 
|  | switch (currentAuthType) { | 
|  | case AUTH_SHAREDKEY: | 
|  | param->value = IW_AUTH_ALG_SHARED_KEY; | 
|  | break; | 
|  | case AUTH_ENCRYPT: | 
|  | default: | 
|  | param->value = IW_AUTH_ALG_OPEN_SYSTEM; | 
|  | break; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_WPA_ENABLED: | 
|  | param->value = 0; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Tx-Power | 
|  | */ | 
|  | static int airo_set_txpow(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  | int i; | 
|  | int rc = -EINVAL; | 
|  |  | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  |  | 
|  | if (vwrq->disabled) { | 
|  | set_bit (FLAG_RADIO_OFF, &local->flags); | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  | if (vwrq->flags != IW_TXPOW_MWATT) { | 
|  | return -EINVAL; | 
|  | } | 
|  | clear_bit (FLAG_RADIO_OFF, &local->flags); | 
|  | for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++) | 
|  | if ((vwrq->value==cap_rid.txPowerLevels[i])) { | 
|  | readConfigRid(local, 1); | 
|  | local->config.txPower = vwrq->value; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | rc = -EINPROGRESS;	/* Call commit handler */ | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Tx-Power | 
|  | */ | 
|  | static int airo_get_txpow(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | vwrq->value = local->config.txPower; | 
|  | vwrq->fixed = 1;	/* No power control */ | 
|  | vwrq->disabled = test_bit(FLAG_RADIO_OFF, &local->flags); | 
|  | vwrq->flags = IW_TXPOW_MWATT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Retry limits | 
|  | */ | 
|  | static int airo_set_retry(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int rc = -EINVAL; | 
|  |  | 
|  | if(vwrq->disabled) { | 
|  | return -EINVAL; | 
|  | } | 
|  | readConfigRid(local, 1); | 
|  | if(vwrq->flags & IW_RETRY_LIMIT) { | 
|  | if(vwrq->flags & IW_RETRY_MAX) | 
|  | local->config.longRetryLimit = vwrq->value; | 
|  | else if (vwrq->flags & IW_RETRY_MIN) | 
|  | local->config.shortRetryLimit = vwrq->value; | 
|  | else { | 
|  | /* No modifier : set both */ | 
|  | local->config.longRetryLimit = vwrq->value; | 
|  | local->config.shortRetryLimit = vwrq->value; | 
|  | } | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | rc = -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  | if(vwrq->flags & IW_RETRY_LIFETIME) { | 
|  | local->config.txLifetime = vwrq->value / 1024; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | rc = -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Retry limits | 
|  | */ | 
|  | static int airo_get_retry(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | vwrq->disabled = 0;      /* Can't be disabled */ | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | /* Note : by default, display the min retry number */ | 
|  | if((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { | 
|  | vwrq->flags = IW_RETRY_LIFETIME; | 
|  | vwrq->value = (int)local->config.txLifetime * 1024; | 
|  | } else if((vwrq->flags & IW_RETRY_MAX)) { | 
|  | vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; | 
|  | vwrq->value = (int)local->config.longRetryLimit; | 
|  | } else { | 
|  | vwrq->flags = IW_RETRY_LIMIT; | 
|  | vwrq->value = (int)local->config.shortRetryLimit; | 
|  | if((int)local->config.shortRetryLimit != (int)local->config.longRetryLimit) | 
|  | vwrq->flags |= IW_RETRY_MIN; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get range info | 
|  | */ | 
|  | static int airo_get_range(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | struct iw_range *range = (struct iw_range *) extra; | 
|  | CapabilityRid cap_rid;		/* Card capability info */ | 
|  | int		i; | 
|  | int		k; | 
|  |  | 
|  | readCapabilityRid(local, &cap_rid, 1); | 
|  |  | 
|  | dwrq->length = sizeof(struct iw_range); | 
|  | memset(range, 0, sizeof(*range)); | 
|  | range->min_nwid = 0x0000; | 
|  | range->max_nwid = 0x0000; | 
|  | range->num_channels = 14; | 
|  | /* Should be based on cap_rid.country to give only | 
|  | * what the current card support */ | 
|  | k = 0; | 
|  | for(i = 0; i < 14; i++) { | 
|  | range->freq[k].i = i + 1; /* List index */ | 
|  | range->freq[k].m = frequency_list[i] * 100000; | 
|  | range->freq[k++].e = 1;	/* Values in table in MHz -> * 10^5 * 10 */ | 
|  | } | 
|  | range->num_frequency = k; | 
|  |  | 
|  | range->sensitivity = 65535; | 
|  |  | 
|  | /* Hum... Should put the right values there */ | 
|  | if (local->rssi) | 
|  | range->max_qual.qual = 100;	/* % */ | 
|  | else | 
|  | range->max_qual.qual = airo_get_max_quality(&cap_rid); | 
|  | range->max_qual.level = 0x100 - 120;	/* -120 dBm */ | 
|  | range->max_qual.noise = 0x100 - 120;	/* -120 dBm */ | 
|  |  | 
|  | /* Experimental measurements - boundary 11/5.5 Mb/s */ | 
|  | /* Note : with or without the (local->rssi), results | 
|  | * are somewhat different. - Jean II */ | 
|  | if (local->rssi) { | 
|  | range->avg_qual.qual = 50;		/* % */ | 
|  | range->avg_qual.level = 0x100 - 70;	/* -70 dBm */ | 
|  | } else { | 
|  | range->avg_qual.qual = airo_get_avg_quality(&cap_rid); | 
|  | range->avg_qual.level = 0x100 - 80;	/* -80 dBm */ | 
|  | } | 
|  | range->avg_qual.noise = 0x100 - 85;		/* -85 dBm */ | 
|  |  | 
|  | for(i = 0 ; i < 8 ; i++) { | 
|  | range->bitrate[i] = cap_rid.supportedRates[i] * 500000; | 
|  | if(range->bitrate[i] == 0) | 
|  | break; | 
|  | } | 
|  | range->num_bitrates = i; | 
|  |  | 
|  | /* Set an indication of the max TCP throughput | 
|  | * in bit/s that we can expect using this interface. | 
|  | * May be use for QoS stuff... Jean II */ | 
|  | if(i > 2) | 
|  | range->throughput = 5000 * 1000; | 
|  | else | 
|  | range->throughput = 1500 * 1000; | 
|  |  | 
|  | range->min_rts = 0; | 
|  | range->max_rts = AIRO_DEF_MTU; | 
|  | range->min_frag = 256; | 
|  | range->max_frag = AIRO_DEF_MTU; | 
|  |  | 
|  | if(cap_rid.softCap & 2) { | 
|  | // WEP: RC4 40 bits | 
|  | range->encoding_size[0] = 5; | 
|  | // RC4 ~128 bits | 
|  | if (cap_rid.softCap & 0x100) { | 
|  | range->encoding_size[1] = 13; | 
|  | range->num_encoding_sizes = 2; | 
|  | } else | 
|  | range->num_encoding_sizes = 1; | 
|  | range->max_encoding_tokens = (cap_rid.softCap & 0x80) ? 4 : 1; | 
|  | } else { | 
|  | range->num_encoding_sizes = 0; | 
|  | range->max_encoding_tokens = 0; | 
|  | } | 
|  | range->min_pmp = 0; | 
|  | range->max_pmp = 5000000;	/* 5 secs */ | 
|  | range->min_pmt = 0; | 
|  | range->max_pmt = 65535 * 1024;	/* ??? */ | 
|  | range->pmp_flags = IW_POWER_PERIOD; | 
|  | range->pmt_flags = IW_POWER_TIMEOUT; | 
|  | range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R; | 
|  |  | 
|  | /* Transmit Power - values are in mW */ | 
|  | for(i = 0 ; i < 8 ; i++) { | 
|  | range->txpower[i] = cap_rid.txPowerLevels[i]; | 
|  | if(range->txpower[i] == 0) | 
|  | break; | 
|  | } | 
|  | range->num_txpower = i; | 
|  | range->txpower_capa = IW_TXPOW_MWATT; | 
|  | range->we_version_source = 19; | 
|  | range->we_version_compiled = WIRELESS_EXT; | 
|  | range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; | 
|  | range->retry_flags = IW_RETRY_LIMIT; | 
|  | range->r_time_flags = IW_RETRY_LIFETIME; | 
|  | range->min_retry = 1; | 
|  | range->max_retry = 65535; | 
|  | range->min_r_time = 1024; | 
|  | range->max_r_time = 65535 * 1024; | 
|  |  | 
|  | /* Event capability (kernel + driver) */ | 
|  | range->event_capa[0] = (IW_EVENT_CAPA_K_0 | | 
|  | IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | | 
|  | IW_EVENT_CAPA_MASK(SIOCGIWAP) | | 
|  | IW_EVENT_CAPA_MASK(SIOCGIWSCAN)); | 
|  | range->event_capa[1] = IW_EVENT_CAPA_K_1; | 
|  | range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVTXDROP); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Power Management | 
|  | */ | 
|  | static int airo_set_power(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | if (vwrq->disabled) { | 
|  | if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) { | 
|  | return -EINVAL; | 
|  | } | 
|  | local->config.powerSaveMode = POWERSAVE_CAM; | 
|  | local->config.rmode &= 0xFF00; | 
|  | local->config.rmode |= RXMODE_BC_MC_ADDR; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  | if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { | 
|  | local->config.fastListenDelay = (vwrq->value + 500) / 1024; | 
|  | local->config.powerSaveMode = POWERSAVE_PSPCAM; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | } else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) { | 
|  | local->config.fastListenInterval = local->config.listenInterval = (vwrq->value + 500) / 1024; | 
|  | local->config.powerSaveMode = POWERSAVE_PSPCAM; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | } | 
|  | switch (vwrq->flags & IW_POWER_MODE) { | 
|  | case IW_POWER_UNICAST_R: | 
|  | if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) { | 
|  | return -EINVAL; | 
|  | } | 
|  | local->config.rmode &= 0xFF00; | 
|  | local->config.rmode |= RXMODE_ADDR; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | break; | 
|  | case IW_POWER_ALL_R: | 
|  | if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) { | 
|  | return -EINVAL; | 
|  | } | 
|  | local->config.rmode &= 0xFF00; | 
|  | local->config.rmode |= RXMODE_BC_MC_ADDR; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  | case IW_POWER_ON: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | // Note : we may want to factor local->need_commit here | 
|  | // Note2 : may also want to factor RXMODE_RFMON test | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Power Management | 
|  | */ | 
|  | static int airo_get_power(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | int mode; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | mode = local->config.powerSaveMode; | 
|  | if ((vwrq->disabled = (mode == POWERSAVE_CAM))) | 
|  | return 0; | 
|  | if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { | 
|  | vwrq->value = (int)local->config.fastListenDelay * 1024; | 
|  | vwrq->flags = IW_POWER_TIMEOUT; | 
|  | } else { | 
|  | vwrq->value = (int)local->config.fastListenInterval * 1024; | 
|  | vwrq->flags = IW_POWER_PERIOD; | 
|  | } | 
|  | if ((local->config.rmode & 0xFF) == RXMODE_ADDR) | 
|  | vwrq->flags |= IW_POWER_UNICAST_R; | 
|  | else | 
|  | vwrq->flags |= IW_POWER_ALL_R; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : set Sensitivity | 
|  | */ | 
|  | static int airo_set_sens(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | local->config.rssiThreshold = vwrq->disabled ? RSSI_DEFAULT : vwrq->value; | 
|  | set_bit (FLAG_COMMIT, &local->flags); | 
|  |  | 
|  | return -EINPROGRESS;		/* Call commit handler */ | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get Sensitivity | 
|  | */ | 
|  | static int airo_get_sens(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  |  | 
|  | readConfigRid(local, 1); | 
|  | vwrq->value = local->config.rssiThreshold; | 
|  | vwrq->disabled = (vwrq->value == 0); | 
|  | vwrq->fixed = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : get AP List | 
|  | * Note : this is deprecated in favor of IWSCAN | 
|  | */ | 
|  | static int airo_get_aplist(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | struct sockaddr *address = (struct sockaddr *) extra; | 
|  | struct iw_quality qual[IW_MAX_AP]; | 
|  | BSSListRid BSSList; | 
|  | int i; | 
|  | int loseSync = capable(CAP_NET_ADMIN) ? 1: -1; | 
|  |  | 
|  | for (i = 0; i < IW_MAX_AP; i++) { | 
|  | if (readBSSListRid(local, loseSync, &BSSList)) | 
|  | break; | 
|  | loseSync = 0; | 
|  | memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN); | 
|  | address[i].sa_family = ARPHRD_ETHER; | 
|  | if (local->rssi) { | 
|  | qual[i].level = 0x100 - BSSList.dBm; | 
|  | qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm ); | 
|  | qual[i].updated = IW_QUAL_QUAL_UPDATED | 
|  | | IW_QUAL_LEVEL_UPDATED | 
|  | | IW_QUAL_DBM; | 
|  | } else { | 
|  | qual[i].level = (BSSList.dBm + 321) / 2; | 
|  | qual[i].qual = 0; | 
|  | qual[i].updated = IW_QUAL_QUAL_INVALID | 
|  | | IW_QUAL_LEVEL_UPDATED | 
|  | | IW_QUAL_DBM; | 
|  | } | 
|  | qual[i].noise = local->wstats.qual.noise; | 
|  | if (BSSList.index == 0xffff) | 
|  | break; | 
|  | } | 
|  | if (!i) { | 
|  | StatusRid status_rid;		/* Card status info */ | 
|  | readStatusRid(local, &status_rid, 1); | 
|  | for (i = 0; | 
|  | i < min(IW_MAX_AP, 4) && | 
|  | (status_rid.bssid[i][0] | 
|  | & status_rid.bssid[i][1] | 
|  | & status_rid.bssid[i][2] | 
|  | & status_rid.bssid[i][3] | 
|  | & status_rid.bssid[i][4] | 
|  | & status_rid.bssid[i][5])!=0xff && | 
|  | (status_rid.bssid[i][0] | 
|  | | status_rid.bssid[i][1] | 
|  | | status_rid.bssid[i][2] | 
|  | | status_rid.bssid[i][3] | 
|  | | status_rid.bssid[i][4] | 
|  | | status_rid.bssid[i][5]); | 
|  | i++) { | 
|  | memcpy(address[i].sa_data, | 
|  | status_rid.bssid[i], ETH_ALEN); | 
|  | address[i].sa_family = ARPHRD_ETHER; | 
|  | } | 
|  | } else { | 
|  | dwrq->flags = 1; /* Should be define'd */ | 
|  | memcpy(extra + sizeof(struct sockaddr)*i, | 
|  | &qual,  sizeof(struct iw_quality)*i); | 
|  | } | 
|  | dwrq->length = i; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : Initiate Scan | 
|  | */ | 
|  | static int airo_set_scan(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_param *vwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *ai = dev->priv; | 
|  | Cmd cmd; | 
|  | Resp rsp; | 
|  | int wake = 0; | 
|  |  | 
|  | /* Note : you may have realised that, as this is a SET operation, | 
|  | * this is privileged and therefore a normal user can't | 
|  | * perform scanning. | 
|  | * This is not an error, while the device perform scanning, | 
|  | * traffic doesn't flow, so it's a perfect DoS... | 
|  | * Jean II */ | 
|  | if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN; | 
|  |  | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | /* If there's already a scan in progress, don't | 
|  | * trigger another one. */ | 
|  | if (ai->scan_timeout > 0) | 
|  | goto out; | 
|  |  | 
|  | /* Initiate a scan command */ | 
|  | ai->scan_timeout = RUN_AT(3*HZ); | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.cmd=CMD_LISTBSS; | 
|  | issuecommand(ai, &cmd, &rsp); | 
|  | wake = 1; | 
|  |  | 
|  | out: | 
|  | up(&ai->sem); | 
|  | if (wake) | 
|  | wake_up_interruptible(&ai->thr_wait); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Translate scan data returned from the card to a card independent | 
|  | * format that the Wireless Tools will understand - Jean II | 
|  | */ | 
|  | static inline char *airo_translate_scan(struct net_device *dev, | 
|  | char *current_ev, | 
|  | char *end_buf, | 
|  | BSSListRid *bss) | 
|  | { | 
|  | struct airo_info *ai = dev->priv; | 
|  | struct iw_event		iwe;		/* Temporary buffer */ | 
|  | u16			capabilities; | 
|  | char *			current_val;	/* For rates */ | 
|  | int			i; | 
|  | char *		buf; | 
|  |  | 
|  | /* First entry *MUST* be the AP MAC address */ | 
|  | iwe.cmd = SIOCGIWAP; | 
|  | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); | 
|  | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); | 
|  |  | 
|  | /* Other entries will be displayed in the order we give them */ | 
|  |  | 
|  | /* Add the ESSID */ | 
|  | iwe.u.data.length = bss->ssidLen; | 
|  | if(iwe.u.data.length > 32) | 
|  | iwe.u.data.length = 32; | 
|  | iwe.cmd = SIOCGIWESSID; | 
|  | iwe.u.data.flags = 1; | 
|  | current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); | 
|  |  | 
|  | /* Add mode */ | 
|  | iwe.cmd = SIOCGIWMODE; | 
|  | capabilities = le16_to_cpu(bss->cap); | 
|  | if(capabilities & (CAP_ESS | CAP_IBSS)) { | 
|  | if(capabilities & CAP_ESS) | 
|  | iwe.u.mode = IW_MODE_MASTER; | 
|  | else | 
|  | iwe.u.mode = IW_MODE_ADHOC; | 
|  | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN); | 
|  | } | 
|  |  | 
|  | /* Add frequency */ | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = le16_to_cpu(bss->dsChannel); | 
|  | /* iwe.u.freq.m containt the channel (starting 1), our | 
|  | * frequency_list array start at index 0... | 
|  | */ | 
|  | iwe.u.freq.m = frequency_list[iwe.u.freq.m - 1] * 100000; | 
|  | iwe.u.freq.e = 1; | 
|  | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); | 
|  |  | 
|  | /* Add quality statistics */ | 
|  | iwe.cmd = IWEVQUAL; | 
|  | if (ai->rssi) { | 
|  | iwe.u.qual.level = 0x100 - bss->dBm; | 
|  | iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm ); | 
|  | iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED | 
|  | | IW_QUAL_LEVEL_UPDATED | 
|  | | IW_QUAL_DBM; | 
|  | } else { | 
|  | iwe.u.qual.level = (bss->dBm + 321) / 2; | 
|  | iwe.u.qual.qual = 0; | 
|  | iwe.u.qual.updated = IW_QUAL_QUAL_INVALID | 
|  | | IW_QUAL_LEVEL_UPDATED | 
|  | | IW_QUAL_DBM; | 
|  | } | 
|  | iwe.u.qual.noise = ai->wstats.qual.noise; | 
|  | current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); | 
|  |  | 
|  | /* Add encryption capability */ | 
|  | iwe.cmd = SIOCGIWENCODE; | 
|  | if(capabilities & CAP_PRIVACY) | 
|  | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
|  | else | 
|  | iwe.u.data.flags = IW_ENCODE_DISABLED; | 
|  | iwe.u.data.length = 0; | 
|  | current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); | 
|  |  | 
|  | /* Rate : stuffing multiple values in a single event require a bit | 
|  | * more of magic - Jean II */ | 
|  | current_val = current_ev + IW_EV_LCP_LEN; | 
|  |  | 
|  | iwe.cmd = SIOCGIWRATE; | 
|  | /* Those two flags are ignored... */ | 
|  | iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | 
|  | /* Max 8 values */ | 
|  | for(i = 0 ; i < 8 ; i++) { | 
|  | /* NULL terminated */ | 
|  | if(bss->rates[i] == 0) | 
|  | break; | 
|  | /* Bit rate given in 500 kb/s units (+ 0x80) */ | 
|  | iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000); | 
|  | /* Add new value to event */ | 
|  | current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); | 
|  | } | 
|  | /* Check if we added any event */ | 
|  | if((current_val - current_ev) > IW_EV_LCP_LEN) | 
|  | current_ev = current_val; | 
|  |  | 
|  | /* Beacon interval */ | 
|  | buf = kmalloc(30, GFP_KERNEL); | 
|  | if (buf) { | 
|  | iwe.cmd = IWEVCUSTOM; | 
|  | sprintf(buf, "bcn_int=%d", bss->beaconInterval); | 
|  | iwe.u.data.length = strlen(buf); | 
|  | current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, buf); | 
|  | kfree(buf); | 
|  | } | 
|  |  | 
|  | /* Put WPA/RSN Information Elements into the event stream */ | 
|  | if (test_bit(FLAG_WPA_CAPABLE, &ai->flags)) { | 
|  | unsigned int num_null_ies = 0; | 
|  | u16 length = sizeof (bss->extra.iep); | 
|  | struct ieee80211_info_element *info_element = | 
|  | (struct ieee80211_info_element *) &bss->extra.iep; | 
|  |  | 
|  | while ((length >= sizeof(*info_element)) && (num_null_ies < 2)) { | 
|  | if (sizeof(*info_element) + info_element->len > length) { | 
|  | /* Invalid element, don't continue parsing IE */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (info_element->id) { | 
|  | case MFIE_TYPE_SSID: | 
|  | /* Two zero-length SSID elements | 
|  | * mean we're done parsing elements */ | 
|  | if (!info_element->len) | 
|  | num_null_ies++; | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_GENERIC: | 
|  | if (info_element->len >= 4 && | 
|  | info_element->data[0] == 0x00 && | 
|  | info_element->data[1] == 0x50 && | 
|  | info_element->data[2] == 0xf2 && | 
|  | info_element->data[3] == 0x01) { | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = min(info_element->len + 2, | 
|  | MAX_WPA_IE_LEN); | 
|  | current_ev = iwe_stream_add_point(current_ev, end_buf, | 
|  | &iwe, (char *) info_element); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case MFIE_TYPE_RSN: | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = min(info_element->len + 2, | 
|  | MAX_WPA_IE_LEN); | 
|  | current_ev = iwe_stream_add_point(current_ev, end_buf, | 
|  | &iwe, (char *) info_element); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | length -= sizeof(*info_element) + info_element->len; | 
|  | info_element = | 
|  | (struct ieee80211_info_element *)&info_element-> | 
|  | data[info_element->len]; | 
|  | } | 
|  | } | 
|  | return current_ev; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Wireless Handler : Read Scan Results | 
|  | */ | 
|  | static int airo_get_scan(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | struct iw_point *dwrq, | 
|  | char *extra) | 
|  | { | 
|  | struct airo_info *ai = dev->priv; | 
|  | BSSListElement *net; | 
|  | int err = 0; | 
|  | char *current_ev = extra; | 
|  |  | 
|  | /* If a scan is in-progress, return -EAGAIN */ | 
|  | if (ai->scan_timeout > 0) | 
|  | return -EAGAIN; | 
|  |  | 
|  | if (down_interruptible(&ai->sem)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | list_for_each_entry (net, &ai->network_list, list) { | 
|  | /* Translate to WE format this entry */ | 
|  | current_ev = airo_translate_scan(dev, current_ev, | 
|  | extra + dwrq->length, | 
|  | &net->bss); | 
|  |  | 
|  | /* Check if there is space for one more entry */ | 
|  | if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { | 
|  | /* Ask user space to try again with a bigger buffer */ | 
|  | err = -E2BIG; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Length of data */ | 
|  | dwrq->length = (current_ev - extra); | 
|  | dwrq->flags = 0;	/* todo */ | 
|  |  | 
|  | out: | 
|  | up(&ai->sem); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Commit handler : called after a bunch of SET operations | 
|  | */ | 
|  | static int airo_config_commit(struct net_device *dev, | 
|  | struct iw_request_info *info,	/* NULL */ | 
|  | void *zwrq,			/* NULL */ | 
|  | char *extra)			/* NULL */ | 
|  | { | 
|  | struct airo_info *local = dev->priv; | 
|  | Resp rsp; | 
|  |  | 
|  | if (!test_bit (FLAG_COMMIT, &local->flags)) | 
|  | return 0; | 
|  |  | 
|  | /* Some of the "SET" function may have modified some of the | 
|  | * parameters. It's now time to commit them in the card */ | 
|  | disable_MAC(local, 1); | 
|  | if (test_bit (FLAG_RESET, &local->flags)) { | 
|  | APListRid APList_rid; | 
|  | SsidRid SSID_rid; | 
|  |  | 
|  | readAPListRid(local, &APList_rid); | 
|  | readSsidRid(local, &SSID_rid); | 
|  | if (test_bit(FLAG_MPI,&local->flags)) | 
|  | setup_card(local, dev->dev_addr, 1 ); | 
|  | else | 
|  | reset_airo_card(dev); | 
|  | disable_MAC(local, 1); | 
|  | writeSsidRid(local, &SSID_rid, 1); | 
|  | writeAPListRid(local, &APList_rid, 1); | 
|  | } | 
|  | if (down_interruptible(&local->sem)) | 
|  | return -ERESTARTSYS; | 
|  | writeConfigRid(local, 0); | 
|  | enable_MAC(local, &rsp, 0); | 
|  | if (test_bit (FLAG_RESET, &local->flags)) | 
|  | airo_set_promisc(local); | 
|  | else | 
|  | up(&local->sem); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*------------------------------------------------------------------*/ | 
|  | /* | 
|  | * Structures to export the Wireless Handlers | 
|  | */ | 
|  |  | 
|  | static const struct iw_priv_args airo_private_args[] = { | 
|  | /*{ cmd,         set_args,                            get_args, name } */ | 
|  | { AIROIOCTL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl), | 
|  | IW_PRIV_TYPE_BYTE | 2047, "airoioctl" }, | 
|  | { AIROIDIFC, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl), | 
|  | IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "airoidifc" }, | 
|  | }; | 
|  |  | 
|  | static const iw_handler		airo_handler[] = | 
|  | { | 
|  | (iw_handler) airo_config_commit,	/* SIOCSIWCOMMIT */ | 
|  | (iw_handler) airo_get_name,		/* SIOCGIWNAME */ | 
|  | (iw_handler) NULL,			/* SIOCSIWNWID */ | 
|  | (iw_handler) NULL,			/* SIOCGIWNWID */ | 
|  | (iw_handler) airo_set_freq,		/* SIOCSIWFREQ */ | 
|  | (iw_handler) airo_get_freq,		/* SIOCGIWFREQ */ | 
|  | (iw_handler) airo_set_mode,		/* SIOCSIWMODE */ | 
|  | (iw_handler) airo_get_mode,		/* SIOCGIWMODE */ | 
|  | (iw_handler) airo_set_sens,		/* SIOCSIWSENS */ | 
|  | (iw_handler) airo_get_sens,		/* SIOCGIWSENS */ | 
|  | (iw_handler) NULL,			/* SIOCSIWRANGE */ | 
|  | (iw_handler) airo_get_range,		/* SIOCGIWRANGE */ | 
|  | (iw_handler) NULL,			/* SIOCSIWPRIV */ | 
|  | (iw_handler) NULL,			/* SIOCGIWPRIV */ | 
|  | (iw_handler) NULL,			/* SIOCSIWSTATS */ | 
|  | (iw_handler) NULL,			/* SIOCGIWSTATS */ | 
|  | iw_handler_set_spy,			/* SIOCSIWSPY */ | 
|  | iw_handler_get_spy,			/* SIOCGIWSPY */ | 
|  | iw_handler_set_thrspy,			/* SIOCSIWTHRSPY */ | 
|  | iw_handler_get_thrspy,			/* SIOCGIWTHRSPY */ | 
|  | (iw_handler) airo_set_wap,		/* SIOCSIWAP */ | 
|  | (iw_handler) airo_get_wap,		/* SIOCGIWAP */ | 
|  | (iw_handler) NULL,			/* -- hole -- */ | 
|  | (iw_handler) airo_get_aplist,		/* SIOCGIWAPLIST */ | 
|  | (iw_handler) airo_set_scan,		/* SIOCSIWSCAN */ | 
|  | (iw_handler) airo_get_scan,		/* SIOCGIWSCAN */ | 
|  | (iw_handler) airo_set_essid,		/* SIOCSIWESSID */ | 
|  | (iw_handler) airo_get_essid,		/* SIOCGIWESSID */ | 
|  | (iw_handler) airo_set_nick,		/* SIOCSIWNICKN */ | 
|  | (iw_handler) airo_get_nick,		/* SIOCGIWNICKN */ | 
|  | (iw_handler) NULL,			/* -- hole -- */ | 
|  | (iw_handler) NULL,			/* -- hole -- */ | 
|  | (iw_handler) airo_set_rate,		/* SIOCSIWRATE */ | 
|  | (iw_handler) airo_get_rate,		/* SIOCGIWRATE */ | 
|  | (iw_handler) airo_set_rts,		/* SIOCSIWRTS */ | 
|  | (iw_handler) airo_get_rts,		/* SIOCGIWRTS */ | 
|  | (iw_handler) airo_set_frag,		/* SIOCSIWFRAG */ | 
|  | (iw_handler) airo_get_frag,		/* SIOCGIWFRAG */ | 
|  | (iw_handler) airo_set_txpow,		/* SIOCSIWTXPOW */ | 
|  | (iw_handler) airo_get_txpow,		/* SIOCGIWTXPOW */ | 
|  | (iw_handler) airo_set_retry,		/* SIOCSIWRETRY */ | 
|  | (iw_handler) airo_get_retry,		/* SIOCGIWRETRY */ | 
|  | (iw_handler) airo_set_encode,		/* SIOCSIWENCODE */ | 
|  | (iw_handler) airo_get_encode,		/* SIOCGIWENCODE */ | 
|  | (iw_handler) airo_set_power,		/* SIOCSIWPOWER */ | 
|  | (iw_handler) airo_get_power,		/* SIOCGIWPOWER */ | 
|  | (iw_handler) NULL,			/* -- hole -- */ | 
|  | (iw_handler) NULL,			/* -- hole -- */ | 
|  | (iw_handler) NULL,			/* SIOCSIWGENIE */ | 
|  | (iw_handler) NULL,			/* SIOCGIWGENIE */ | 
|  | (iw_handler) airo_set_auth,		/* SIOCSIWAUTH */ | 
|  | (iw_handler) airo_get_auth,		/* SIOCGIWAUTH */ | 
|  | (iw_handler) airo_set_encodeext,	/* SIOCSIWENCODEEXT */ | 
|  | (iw_handler) airo_get_encodeext,	/* SIOCGIWENCODEEXT */ | 
|  | (iw_handler) NULL,			/* SIOCSIWPMKSA */ | 
|  | }; | 
|  |  | 
|  | /* Note : don't describe AIROIDIFC and AIROOLDIDIFC in here. | 
|  | * We want to force the use of the ioctl code, because those can't be | 
|  | * won't work the iw_handler code (because they simultaneously read | 
|  | * and write data and iw_handler can't do that). | 
|  | * Note that it's perfectly legal to read/write on a single ioctl command, | 
|  | * you just can't use iwpriv and need to force it via the ioctl handler. | 
|  | * Jean II */ | 
|  | static const iw_handler		airo_private_handler[] = | 
|  | { | 
|  | NULL,				/* SIOCIWFIRSTPRIV */ | 
|  | }; | 
|  |  | 
|  | static const struct iw_handler_def	airo_handler_def = | 
|  | { | 
|  | .num_standard	= sizeof(airo_handler)/sizeof(iw_handler), | 
|  | .num_private	= sizeof(airo_private_handler)/sizeof(iw_handler), | 
|  | .num_private_args = sizeof(airo_private_args)/sizeof(struct iw_priv_args), | 
|  | .standard	= airo_handler, | 
|  | .private	= airo_private_handler, | 
|  | .private_args	= airo_private_args, | 
|  | .get_wireless_stats = airo_get_wireless_stats, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * This defines the configuration part of the Wireless Extensions | 
|  | * Note : irq and spinlock protection will occur in the subroutines | 
|  | * | 
|  | * TODO : | 
|  | *	o Check input value more carefully and fill correct values in range | 
|  | *	o Test and shakeout the bugs (if any) | 
|  | * | 
|  | * Jean II | 
|  | * | 
|  | * Javier Achirica did a great job of merging code from the unnamed CISCO | 
|  | * developer that added support for flashing the card. | 
|  | */ | 
|  | static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | int rc = 0; | 
|  | struct airo_info *ai = (struct airo_info *)dev->priv; | 
|  |  | 
|  | if (ai->power.event) | 
|  | return 0; | 
|  |  | 
|  | switch (cmd) { | 
|  | #ifdef CISCO_EXT | 
|  | case AIROIDIFC: | 
|  | #ifdef AIROOLDIDIFC | 
|  | case AIROOLDIDIFC: | 
|  | #endif | 
|  | { | 
|  | int val = AIROMAGIC; | 
|  | aironet_ioctl com; | 
|  | if (copy_from_user(&com,rq->ifr_data,sizeof(com))) | 
|  | rc = -EFAULT; | 
|  | else if (copy_to_user(com.data,(char *)&val,sizeof(val))) | 
|  | rc = -EFAULT; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case AIROIOCTL: | 
|  | #ifdef AIROOLDIOCTL | 
|  | case AIROOLDIOCTL: | 
|  | #endif | 
|  | /* Get the command struct and hand it off for evaluation by | 
|  | * the proper subfunction | 
|  | */ | 
|  | { | 
|  | aironet_ioctl com; | 
|  | if (copy_from_user(&com,rq->ifr_data,sizeof(com))) { | 
|  | rc = -EFAULT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Separate R/W functions bracket legality here | 
|  | */ | 
|  | if ( com.command == AIRORSWVERSION ) { | 
|  | if (copy_to_user(com.data, swversion, sizeof(swversion))) | 
|  | rc = -EFAULT; | 
|  | else | 
|  | rc = 0; | 
|  | } | 
|  | else if ( com.command <= AIRORRID) | 
|  | rc = readrids(dev,&com); | 
|  | else if ( com.command >= AIROPCAP && com.command <= (AIROPLEAPUSR+2) ) | 
|  | rc = writerids(dev,&com); | 
|  | else if ( com.command >= AIROFLSHRST && com.command <= AIRORESTART ) | 
|  | rc = flashcard(dev,&com); | 
|  | else | 
|  | rc = -EINVAL;      /* Bad command in ioctl */ | 
|  | } | 
|  | break; | 
|  | #endif /* CISCO_EXT */ | 
|  |  | 
|  | // All other calls are currently unsupported | 
|  | default: | 
|  | rc = -EOPNOTSUPP; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get the Wireless stats out of the driver | 
|  | * Note : irq and spinlock protection will occur in the subroutines | 
|  | * | 
|  | * TODO : | 
|  | *	o Check if work in Ad-Hoc mode (otherwise, use SPY, as in wvlan_cs) | 
|  | * | 
|  | * Jean | 
|  | */ | 
|  | static void airo_read_wireless_stats(struct airo_info *local) | 
|  | { | 
|  | StatusRid status_rid; | 
|  | StatsRid stats_rid; | 
|  | CapabilityRid cap_rid; | 
|  | u32 *vals = stats_rid.vals; | 
|  |  | 
|  | /* Get stats out of the card */ | 
|  | clear_bit(JOB_WSTATS, &local->jobs); | 
|  | if (local->power.event) { | 
|  | up(&local->sem); | 
|  | return; | 
|  | } | 
|  | readCapabilityRid(local, &cap_rid, 0); | 
|  | readStatusRid(local, &status_rid, 0); | 
|  | readStatsRid(local, &stats_rid, RID_STATS, 0); | 
|  | up(&local->sem); | 
|  |  | 
|  | /* The status */ | 
|  | local->wstats.status = status_rid.mode; | 
|  |  | 
|  | /* Signal quality and co */ | 
|  | if (local->rssi) { | 
|  | local->wstats.qual.level = airo_rssi_to_dbm( local->rssi, status_rid.sigQuality ); | 
|  | /* normalizedSignalStrength appears to be a percentage */ | 
|  | local->wstats.qual.qual = status_rid.normalizedSignalStrength; | 
|  | } else { | 
|  | local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2; | 
|  | local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); | 
|  | } | 
|  | if (status_rid.len >= 124) { | 
|  | local->wstats.qual.noise = 0x100 - status_rid.noisedBm; | 
|  | local->wstats.qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM; | 
|  | } else { | 
|  | local->wstats.qual.noise = 0; | 
|  | local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED | IW_QUAL_NOISE_INVALID | IW_QUAL_DBM; | 
|  | } | 
|  |  | 
|  | /* Packets discarded in the wireless adapter due to wireless | 
|  | * specific problems */ | 
|  | local->wstats.discard.nwid = vals[56] + vals[57] + vals[58];/* SSID Mismatch */ | 
|  | local->wstats.discard.code = vals[6];/* RxWepErr */ | 
|  | local->wstats.discard.fragment = vals[30]; | 
|  | local->wstats.discard.retries = vals[10]; | 
|  | local->wstats.discard.misc = vals[1] + vals[32]; | 
|  | local->wstats.miss.beacon = vals[34]; | 
|  | } | 
|  |  | 
|  | static struct iw_statistics *airo_get_wireless_stats(struct net_device *dev) | 
|  | { | 
|  | struct airo_info *local =  dev->priv; | 
|  |  | 
|  | if (!test_bit(JOB_WSTATS, &local->jobs)) { | 
|  | /* Get stats out of the card if available */ | 
|  | if (down_trylock(&local->sem) != 0) { | 
|  | set_bit(JOB_WSTATS, &local->jobs); | 
|  | wake_up_interruptible(&local->thr_wait); | 
|  | } else | 
|  | airo_read_wireless_stats(local); | 
|  | } | 
|  |  | 
|  | return &local->wstats; | 
|  | } | 
|  |  | 
|  | #ifdef CISCO_EXT | 
|  | /* | 
|  | * This just translates from driver IOCTL codes to the command codes to | 
|  | * feed to the radio's host interface. Things can be added/deleted | 
|  | * as needed.  This represents the READ side of control I/O to | 
|  | * the card | 
|  | */ | 
|  | static int readrids(struct net_device *dev, aironet_ioctl *comp) { | 
|  | unsigned short ridcode; | 
|  | unsigned char *iobuf; | 
|  | int len; | 
|  | struct airo_info *ai = dev->priv; | 
|  | Resp rsp; | 
|  |  | 
|  | if (test_bit(FLAG_FLASHING, &ai->flags)) | 
|  | return -EIO; | 
|  |  | 
|  | switch(comp->command) | 
|  | { | 
|  | case AIROGCAP:      ridcode = RID_CAPABILITIES; break; | 
|  | case AIROGCFG:      ridcode = RID_CONFIG; | 
|  | if (test_bit(FLAG_COMMIT, &ai->flags)) { | 
|  | disable_MAC (ai, 1); | 
|  | writeConfigRid (ai, 1); | 
|  | enable_MAC (ai, &rsp, 1); | 
|  | } | 
|  | break; | 
|  | case AIROGSLIST:    ridcode = RID_SSID;         break; | 
|  | case AIROGVLIST:    ridcode = RID_APLIST;       break; | 
|  | case AIROGDRVNAM:   ridcode = RID_DRVNAME;      break; | 
|  | case AIROGEHTENC:   ridcode = RID_ETHERENCAP;   break; | 
|  | case AIROGWEPKTMP:  ridcode = RID_WEP_TEMP; | 
|  | /* Only super-user can read WEP keys */ | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | break; | 
|  | case AIROGWEPKNV:   ridcode = RID_WEP_PERM; | 
|  | /* Only super-user can read WEP keys */ | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | break; | 
|  | case AIROGSTAT:     ridcode = RID_STATUS;       break; | 
|  | case AIROGSTATSD32: ridcode = RID_STATSDELTA;   break; | 
|  | case AIROGSTATSC32: ridcode = RID_STATS;        break; | 
|  | case AIROGMICSTATS: | 
|  | if (copy_to_user(comp->data, &ai->micstats, | 
|  | min((int)comp->len,(int)sizeof(ai->micstats)))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | case AIRORRID:      ridcode = comp->ridnum;     break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1); | 
|  | /* get the count of bytes in the rid  docs say 1st 2 bytes is it. | 
|  | * then return it to the user | 
|  | * 9/22/2000 Honor user given length | 
|  | */ | 
|  | len = comp->len; | 
|  |  | 
|  | if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { | 
|  | kfree (iobuf); | 
|  | return -EFAULT; | 
|  | } | 
|  | kfree (iobuf); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Danger Will Robinson write the rids here | 
|  | */ | 
|  |  | 
|  | static int writerids(struct net_device *dev, aironet_ioctl *comp) { | 
|  | struct airo_info *ai = dev->priv; | 
|  | int  ridcode; | 
|  | int  enabled; | 
|  | Resp      rsp; | 
|  | static int (* writer)(struct airo_info *, u16 rid, const void *, int, int); | 
|  | unsigned char *iobuf; | 
|  |  | 
|  | /* Only super-user can write RIDs */ | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | if (test_bit(FLAG_FLASHING, &ai->flags)) | 
|  | return -EIO; | 
|  |  | 
|  | ridcode = 0; | 
|  | writer = do_writerid; | 
|  |  | 
|  | switch(comp->command) | 
|  | { | 
|  | case AIROPSIDS:     ridcode = RID_SSID;         break; | 
|  | case AIROPCAP:      ridcode = RID_CAPABILITIES; break; | 
|  | case AIROPAPLIST:   ridcode = RID_APLIST;       break; | 
|  | case AIROPCFG: ai->config.len = 0; | 
|  | clear_bit(FLAG_COMMIT, &ai->flags); | 
|  | ridcode = RID_CONFIG;       break; | 
|  | case AIROPWEPKEYNV: ridcode = RID_WEP_PERM;     break; | 
|  | case AIROPLEAPUSR:  ridcode = RID_LEAPUSERNAME; break; | 
|  | case AIROPLEAPPWD:  ridcode = RID_LEAPPASSWORD; break; | 
|  | case AIROPWEPKEY:   ridcode = RID_WEP_TEMP; writer = PC4500_writerid; | 
|  | break; | 
|  | case AIROPLEAPUSR+1: ridcode = 0xFF2A;          break; | 
|  | case AIROPLEAPUSR+2: ridcode = 0xFF2B;          break; | 
|  |  | 
|  | /* this is not really a rid but a command given to the card | 
|  | * same with MAC off | 
|  | */ | 
|  | case AIROPMACON: | 
|  | if (enable_MAC(ai, &rsp, 1) != 0) | 
|  | return -EIO; | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Evidently this code in the airo driver does not get a symbol | 
|  | * as disable_MAC. it's probably so short the compiler does not gen one. | 
|  | */ | 
|  | case AIROPMACOFF: | 
|  | disable_MAC(ai, 1); | 
|  | return 0; | 
|  |  | 
|  | /* This command merely clears the counts does not actually store any data | 
|  | * only reads rid. But as it changes the cards state, I put it in the | 
|  | * writerid routines. | 
|  | */ | 
|  | case AIROPSTCLR: | 
|  | if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | PC4500_readrid(ai,RID_STATSDELTACLEAR,iobuf,RIDSIZE, 1); | 
|  |  | 
|  | enabled = ai->micstats.enabled; | 
|  | memset(&ai->micstats,0,sizeof(ai->micstats)); | 
|  | ai->micstats.enabled = enabled; | 
|  |  | 
|  | if (copy_to_user(comp->data, iobuf, | 
|  | min((int)comp->len, (int)RIDSIZE))) { | 
|  | kfree (iobuf); | 
|  | return -EFAULT; | 
|  | } | 
|  | kfree (iobuf); | 
|  | return 0; | 
|  |  | 
|  | default: | 
|  | return -EOPNOTSUPP;	/* Blarg! */ | 
|  | } | 
|  | if(comp->len > RIDSIZE) | 
|  | return -EINVAL; | 
|  |  | 
|  | if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (copy_from_user(iobuf,comp->data,comp->len)) { | 
|  | kfree (iobuf); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | if (comp->command == AIROPCFG) { | 
|  | ConfigRid *cfg = (ConfigRid *)iobuf; | 
|  |  | 
|  | if (test_bit(FLAG_MIC_CAPABLE, &ai->flags)) | 
|  | cfg->opmode |= MODE_MIC; | 
|  |  | 
|  | if ((cfg->opmode & 0xFF) == MODE_STA_IBSS) | 
|  | set_bit (FLAG_ADHOC, &ai->flags); | 
|  | else | 
|  | clear_bit (FLAG_ADHOC, &ai->flags); | 
|  | } | 
|  |  | 
|  | if((*writer)(ai, ridcode, iobuf,comp->len,1)) { | 
|  | kfree (iobuf); | 
|  | return -EIO; | 
|  | } | 
|  | kfree (iobuf); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /***************************************************************************** | 
|  | * Ancillary flash / mod functions much black magic lurkes here              * | 
|  | ***************************************************************************** | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Flash command switch table | 
|  | */ | 
|  |  | 
|  | static int flashcard(struct net_device *dev, aironet_ioctl *comp) { | 
|  | int z; | 
|  |  | 
|  | /* Only super-user can modify flash */ | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | switch(comp->command) | 
|  | { | 
|  | case AIROFLSHRST: | 
|  | return cmdreset((struct airo_info *)dev->priv); | 
|  |  | 
|  | case AIROFLSHSTFL: | 
|  | if (!((struct airo_info *)dev->priv)->flash && | 
|  | (((struct airo_info *)dev->priv)->flash = kmalloc (FLASHSIZE, GFP_KERNEL)) == NULL) | 
|  | return -ENOMEM; | 
|  | return setflashmode((struct airo_info *)dev->priv); | 
|  |  | 
|  | case AIROFLSHGCHR: /* Get char from aux */ | 
|  | if(comp->len != sizeof(int)) | 
|  | return -EINVAL; | 
|  | if (copy_from_user(&z,comp->data,comp->len)) | 
|  | return -EFAULT; | 
|  | return flashgchar((struct airo_info *)dev->priv,z,8000); | 
|  |  | 
|  | case AIROFLSHPCHR: /* Send char to card. */ | 
|  | if(comp->len != sizeof(int)) | 
|  | return -EINVAL; | 
|  | if (copy_from_user(&z,comp->data,comp->len)) | 
|  | return -EFAULT; | 
|  | return flashpchar((struct airo_info *)dev->priv,z,8000); | 
|  |  | 
|  | case AIROFLPUTBUF: /* Send 32k to card */ | 
|  | if (!((struct airo_info *)dev->priv)->flash) | 
|  | return -ENOMEM; | 
|  | if(comp->len > FLASHSIZE) | 
|  | return -EINVAL; | 
|  | if(copy_from_user(((struct airo_info *)dev->priv)->flash,comp->data,comp->len)) | 
|  | return -EFAULT; | 
|  |  | 
|  | flashputbuf((struct airo_info *)dev->priv); | 
|  | return 0; | 
|  |  | 
|  | case AIRORESTART: | 
|  | if(flashrestart((struct airo_info *)dev->priv,dev)) | 
|  | return -EIO; | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | #define FLASH_COMMAND  0x7e7e | 
|  |  | 
|  | /* | 
|  | * STEP 1) | 
|  | * Disable MAC and do soft reset on | 
|  | * card. | 
|  | */ | 
|  |  | 
|  | static int cmdreset(struct airo_info *ai) { | 
|  | disable_MAC(ai, 1); | 
|  |  | 
|  | if(!waitbusy (ai)){ | 
|  | airo_print_info(ai->dev->name, "Waitbusy hang before RESET"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | OUT4500(ai,COMMAND,CMD_SOFTRESET); | 
|  |  | 
|  | ssleep(1);			/* WAS 600 12/7/00 */ | 
|  |  | 
|  | if(!waitbusy (ai)){ | 
|  | airo_print_info(ai->dev->name, "Waitbusy hang AFTER RESET"); | 
|  | return -EBUSY; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* STEP 2) | 
|  | * Put the card in legendary flash | 
|  | * mode | 
|  | */ | 
|  |  | 
|  | static int setflashmode (struct airo_info *ai) { | 
|  | set_bit (FLAG_FLASHING, &ai->flags); | 
|  |  | 
|  | OUT4500(ai, SWS0, FLASH_COMMAND); | 
|  | OUT4500(ai, SWS1, FLASH_COMMAND); | 
|  | if (probe) { | 
|  | OUT4500(ai, SWS0, FLASH_COMMAND); | 
|  | OUT4500(ai, COMMAND,0x10); | 
|  | } else { | 
|  | OUT4500(ai, SWS2, FLASH_COMMAND); | 
|  | OUT4500(ai, SWS3, FLASH_COMMAND); | 
|  | OUT4500(ai, COMMAND,0); | 
|  | } | 
|  | msleep(500);		/* 500ms delay */ | 
|  |  | 
|  | if(!waitbusy(ai)) { | 
|  | clear_bit (FLAG_FLASHING, &ai->flags); | 
|  | airo_print_info(ai->dev->name, "Waitbusy hang after setflash mode"); | 
|  | return -EIO; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Put character to SWS0 wait for dwelltime | 
|  | * x 50us for  echo . | 
|  | */ | 
|  |  | 
|  | static int flashpchar(struct airo_info *ai,int byte,int dwelltime) { | 
|  | int echo; | 
|  | int waittime; | 
|  |  | 
|  | byte |= 0x8000; | 
|  |  | 
|  | if(dwelltime == 0 ) | 
|  | dwelltime = 200; | 
|  |  | 
|  | waittime=dwelltime; | 
|  |  | 
|  | /* Wait for busy bit d15 to go false indicating buffer empty */ | 
|  | while ((IN4500 (ai, SWS0) & 0x8000) && waittime > 0) { | 
|  | udelay (50); | 
|  | waittime -= 50; | 
|  | } | 
|  |  | 
|  | /* timeout for busy clear wait */ | 
|  | if(waittime <= 0 ){ | 
|  | airo_print_info(ai->dev->name, "flash putchar busywait timeout!"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* Port is clear now write byte and wait for it to echo back */ | 
|  | do { | 
|  | OUT4500(ai,SWS0,byte); | 
|  | udelay(50); | 
|  | dwelltime -= 50; | 
|  | echo = IN4500(ai,SWS1); | 
|  | } while (dwelltime >= 0 && echo != byte); | 
|  |  | 
|  | OUT4500(ai,SWS1,0); | 
|  |  | 
|  | return (echo == byte) ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get a character from the card matching matchbyte | 
|  | * Step 3) | 
|  | */ | 
|  | static int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){ | 
|  | int           rchar; | 
|  | unsigned char rbyte=0; | 
|  |  | 
|  | do { | 
|  | rchar = IN4500(ai,SWS1); | 
|  |  | 
|  | if(dwelltime && !(0x8000 & rchar)){ | 
|  | dwelltime -= 10; | 
|  | mdelay(10); | 
|  | continue; | 
|  | } | 
|  | rbyte = 0xff & rchar; | 
|  |  | 
|  | if( (rbyte == matchbyte) && (0x8000 & rchar) ){ | 
|  | OUT4500(ai,SWS1,0); | 
|  | return 0; | 
|  | } | 
|  | if( rbyte == 0x81 || rbyte == 0x82 || rbyte == 0x83 || rbyte == 0x1a || 0xffff == rchar) | 
|  | break; | 
|  | OUT4500(ai,SWS1,0); | 
|  |  | 
|  | }while(dwelltime > 0); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Transfer 32k of firmware data from user buffer to our buffer and | 
|  | * send to the card | 
|  | */ | 
|  |  | 
|  | static int flashputbuf(struct airo_info *ai){ | 
|  | int            nwords; | 
|  |  | 
|  | /* Write stuff */ | 
|  | if (test_bit(FLAG_MPI,&ai->flags)) | 
|  | memcpy_toio(ai->pciaux + 0x8000, ai->flash, FLASHSIZE); | 
|  | else { | 
|  | OUT4500(ai,AUXPAGE,0x100); | 
|  | OUT4500(ai,AUXOFF,0); | 
|  |  | 
|  | for(nwords=0;nwords != FLASHSIZE / 2;nwords++){ | 
|  | OUT4500(ai,AUXDATA,ai->flash[nwords] & 0xffff); | 
|  | } | 
|  | } | 
|  | OUT4500(ai,SWS0,0x8000); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * | 
|  | */ | 
|  | static int flashrestart(struct airo_info *ai,struct net_device *dev){ | 
|  | int    i,status; | 
|  |  | 
|  | ssleep(1);			/* Added 12/7/00 */ | 
|  | clear_bit (FLAG_FLASHING, &ai->flags); | 
|  | if (test_bit(FLAG_MPI, &ai->flags)) { | 
|  | status = mpi_init_descriptors(ai); | 
|  | if (status != SUCCESS) | 
|  | return status; | 
|  | } | 
|  | status = setup_card(ai, dev->dev_addr, 1); | 
|  |  | 
|  | if (!test_bit(FLAG_MPI,&ai->flags)) | 
|  | for( i = 0; i < MAX_FIDS; i++ ) { | 
|  | ai->fids[i] = transmit_allocate | 
|  | ( ai, AIRO_DEF_MTU, i >= MAX_FIDS / 2 ); | 
|  | } | 
|  |  | 
|  | ssleep(1);			/* Added 12/7/00 */ | 
|  | return status; | 
|  | } | 
|  | #endif /* CISCO_EXT */ | 
|  |  | 
|  | /* | 
|  | This program is free software; you can redistribute it and/or | 
|  | modify it under the terms of the GNU General Public License | 
|  | as published by the Free Software Foundation; either version 2 | 
|  | of the License, or (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | In addition: | 
|  |  | 
|  | Redistribution and use in source and binary forms, with or without | 
|  | modification, are permitted provided that the following conditions | 
|  | are met: | 
|  |  | 
|  | 1. Redistributions of source code must retain the above copyright | 
|  | notice, this list of conditions and the following disclaimer. | 
|  | 2. Redistributions in binary form must reproduce the above copyright | 
|  | notice, this list of conditions and the following disclaimer in the | 
|  | documentation and/or other materials provided with the distribution. | 
|  | 3. The name of the author may not be used to endorse or promote | 
|  | products derived from this software without specific prior written | 
|  | permission. | 
|  |  | 
|  | THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | 
|  | IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | 
|  | WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | 
|  | ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | 
|  | INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | 
|  | (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | 
|  | SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | POSSIBILITY OF SUCH DAMAGE. | 
|  | */ | 
|  |  | 
|  | module_init(airo_init_module); | 
|  | module_exit(airo_cleanup_module); |