|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | *  Intel Linux Wireless <ilw@linux.intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include "iwl-eeprom.h" | 
|  | #include "iwl-dev.h" | 
|  | #include "iwl-core.h" | 
|  | #include "iwl-io.h" | 
|  | #include "iwl-helpers.h" | 
|  | #include "iwl-4965-calib.h" | 
|  | #include "iwl-sta.h" | 
|  | #include "iwl-4965-led.h" | 
|  | #include "iwl-4965.h" | 
|  | #include "iwl-4965-debugfs.h" | 
|  |  | 
|  | static int iwl4965_send_tx_power(struct iwl_priv *priv); | 
|  | static int iwl4965_hw_get_temperature(struct iwl_priv *priv); | 
|  |  | 
|  | /* Highest firmware API version supported */ | 
|  | #define IWL4965_UCODE_API_MAX 2 | 
|  |  | 
|  | /* Lowest firmware API version supported */ | 
|  | #define IWL4965_UCODE_API_MIN 2 | 
|  |  | 
|  | #define IWL4965_FW_PRE "iwlwifi-4965-" | 
|  | #define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode" | 
|  | #define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api) | 
|  |  | 
|  | /* check contents of special bootstrap uCode SRAM */ | 
|  | static int iwl4965_verify_bsm(struct iwl_priv *priv) | 
|  | { | 
|  | __le32 *image = priv->ucode_boot.v_addr; | 
|  | u32 len = priv->ucode_boot.len; | 
|  | u32 reg; | 
|  | u32 val; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Begin verify bsm\n"); | 
|  |  | 
|  | /* verify BSM SRAM contents */ | 
|  | val = iwl_legacy_read_prph(priv, BSM_WR_DWCOUNT_REG); | 
|  | for (reg = BSM_SRAM_LOWER_BOUND; | 
|  | reg < BSM_SRAM_LOWER_BOUND + len; | 
|  | reg += sizeof(u32), image++) { | 
|  | val = iwl_legacy_read_prph(priv, reg); | 
|  | if (val != le32_to_cpu(*image)) { | 
|  | IWL_ERR(priv, "BSM uCode verification failed at " | 
|  | "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", | 
|  | BSM_SRAM_LOWER_BOUND, | 
|  | reg - BSM_SRAM_LOWER_BOUND, len, | 
|  | val, le32_to_cpu(*image)); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_load_bsm - Load bootstrap instructions | 
|  | * | 
|  | * BSM operation: | 
|  | * | 
|  | * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program | 
|  | * in special SRAM that does not power down during RFKILL.  When powering back | 
|  | * up after power-saving sleeps (or during initial uCode load), the BSM loads | 
|  | * the bootstrap program into the on-board processor, and starts it. | 
|  | * | 
|  | * The bootstrap program loads (via DMA) instructions and data for a new | 
|  | * program from host DRAM locations indicated by the host driver in the | 
|  | * BSM_DRAM_* registers.  Once the new program is loaded, it starts | 
|  | * automatically. | 
|  | * | 
|  | * When initializing the NIC, the host driver points the BSM to the | 
|  | * "initialize" uCode image.  This uCode sets up some internal data, then | 
|  | * notifies host via "initialize alive" that it is complete. | 
|  | * | 
|  | * The host then replaces the BSM_DRAM_* pointer values to point to the | 
|  | * normal runtime uCode instructions and a backup uCode data cache buffer | 
|  | * (filled initially with starting data values for the on-board processor), | 
|  | * then triggers the "initialize" uCode to load and launch the runtime uCode, | 
|  | * which begins normal operation. | 
|  | * | 
|  | * When doing a power-save shutdown, runtime uCode saves data SRAM into | 
|  | * the backup data cache in DRAM before SRAM is powered down. | 
|  | * | 
|  | * When powering back up, the BSM loads the bootstrap program.  This reloads | 
|  | * the runtime uCode instructions and the backup data cache into SRAM, | 
|  | * and re-launches the runtime uCode from where it left off. | 
|  | */ | 
|  | static int iwl4965_load_bsm(struct iwl_priv *priv) | 
|  | { | 
|  | __le32 *image = priv->ucode_boot.v_addr; | 
|  | u32 len = priv->ucode_boot.len; | 
|  | dma_addr_t pinst; | 
|  | dma_addr_t pdata; | 
|  | u32 inst_len; | 
|  | u32 data_len; | 
|  | int i; | 
|  | u32 done; | 
|  | u32 reg_offset; | 
|  | int ret; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Begin load bsm\n"); | 
|  |  | 
|  | priv->ucode_type = UCODE_RT; | 
|  |  | 
|  | /* make sure bootstrap program is no larger than BSM's SRAM size */ | 
|  | if (len > IWL49_MAX_BSM_SIZE) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Tell bootstrap uCode where to find the "Initialize" uCode | 
|  | *   in host DRAM ... host DRAM physical address bits 35:4 for 4965. | 
|  | * NOTE:  iwl_init_alive_start() will replace these values, | 
|  | *        after the "initialize" uCode has run, to point to | 
|  | *        runtime/protocol instructions and backup data cache. | 
|  | */ | 
|  | pinst = priv->ucode_init.p_addr >> 4; | 
|  | pdata = priv->ucode_init_data.p_addr >> 4; | 
|  | inst_len = priv->ucode_init.len; | 
|  | data_len = priv->ucode_init_data.len; | 
|  |  | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); | 
|  |  | 
|  | /* Fill BSM memory with bootstrap instructions */ | 
|  | for (reg_offset = BSM_SRAM_LOWER_BOUND; | 
|  | reg_offset < BSM_SRAM_LOWER_BOUND + len; | 
|  | reg_offset += sizeof(u32), image++) | 
|  | _iwl_legacy_write_prph(priv, reg_offset, le32_to_cpu(*image)); | 
|  |  | 
|  | ret = iwl4965_verify_bsm(priv); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ | 
|  | iwl_legacy_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0); | 
|  | iwl_legacy_write_prph(priv, | 
|  | BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND); | 
|  | iwl_legacy_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); | 
|  |  | 
|  | /* Load bootstrap code into instruction SRAM now, | 
|  | *   to prepare to load "initialize" uCode */ | 
|  | iwl_legacy_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); | 
|  |  | 
|  | /* Wait for load of bootstrap uCode to finish */ | 
|  | for (i = 0; i < 100; i++) { | 
|  | done = iwl_legacy_read_prph(priv, BSM_WR_CTRL_REG); | 
|  | if (!(done & BSM_WR_CTRL_REG_BIT_START)) | 
|  | break; | 
|  | udelay(10); | 
|  | } | 
|  | if (i < 100) | 
|  | IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i); | 
|  | else { | 
|  | IWL_ERR(priv, "BSM write did not complete!\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* Enable future boot loads whenever power management unit triggers it | 
|  | *   (e.g. when powering back up after power-save shutdown) */ | 
|  | iwl_legacy_write_prph(priv, | 
|  | BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); | 
|  |  | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_set_ucode_ptrs - Set uCode address location | 
|  | * | 
|  | * Tell initialization uCode where to find runtime uCode. | 
|  | * | 
|  | * BSM registers initially contain pointers to initialization uCode. | 
|  | * We need to replace them to load runtime uCode inst and data, | 
|  | * and to save runtime data when powering down. | 
|  | */ | 
|  | static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) | 
|  | { | 
|  | dma_addr_t pinst; | 
|  | dma_addr_t pdata; | 
|  | int ret = 0; | 
|  |  | 
|  | /* bits 35:4 for 4965 */ | 
|  | pinst = priv->ucode_code.p_addr >> 4; | 
|  | pdata = priv->ucode_data_backup.p_addr >> 4; | 
|  |  | 
|  | /* Tell bootstrap uCode where to find image to load */ | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, | 
|  | priv->ucode_data.len); | 
|  |  | 
|  | /* Inst byte count must be last to set up, bit 31 signals uCode | 
|  | *   that all new ptr/size info is in place */ | 
|  | iwl_legacy_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, | 
|  | priv->ucode_code.len | BSM_DRAM_INST_LOAD); | 
|  | IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received | 
|  | * | 
|  | * Called after REPLY_ALIVE notification received from "initialize" uCode. | 
|  | * | 
|  | * The 4965 "initialize" ALIVE reply contains calibration data for: | 
|  | *   Voltage, temperature, and MIMO tx gain correction, now stored in priv | 
|  | *   (3945 does not contain this data). | 
|  | * | 
|  | * Tell "initialize" uCode to go ahead and load the runtime uCode. | 
|  | */ | 
|  | static void iwl4965_init_alive_start(struct iwl_priv *priv) | 
|  | { | 
|  | /* Bootstrap uCode has loaded initialize uCode ... verify inst image. | 
|  | * This is a paranoid check, because we would not have gotten the | 
|  | * "initialize" alive if code weren't properly loaded.  */ | 
|  | if (iwl4965_verify_ucode(priv)) { | 
|  | /* Runtime instruction load was bad; | 
|  | * take it all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n"); | 
|  | goto restart; | 
|  | } | 
|  |  | 
|  | /* Calculate temperature */ | 
|  | priv->temperature = iwl4965_hw_get_temperature(priv); | 
|  |  | 
|  | /* Send pointers to protocol/runtime uCode image ... init code will | 
|  | * load and launch runtime uCode, which will send us another "Alive" | 
|  | * notification. */ | 
|  | IWL_DEBUG_INFO(priv, "Initialization Alive received.\n"); | 
|  | if (iwl4965_set_ucode_ptrs(priv)) { | 
|  | /* Runtime instruction load won't happen; | 
|  | * take it all the way back down so we can try again */ | 
|  | IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n"); | 
|  | goto restart; | 
|  | } | 
|  | return; | 
|  |  | 
|  | restart: | 
|  | queue_work(priv->workqueue, &priv->restart); | 
|  | } | 
|  |  | 
|  | static bool iw4965_is_ht40_channel(__le32 rxon_flags) | 
|  | { | 
|  | int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK) | 
|  | >> RXON_FLG_CHANNEL_MODE_POS; | 
|  | return ((chan_mod == CHANNEL_MODE_PURE_40) || | 
|  | (chan_mod == CHANNEL_MODE_MIXED)); | 
|  | } | 
|  |  | 
|  | static void iwl4965_nic_config(struct iwl_priv *priv) | 
|  | { | 
|  | unsigned long flags; | 
|  | u16 radio_cfg; | 
|  |  | 
|  | spin_lock_irqsave(&priv->lock, flags); | 
|  |  | 
|  | radio_cfg = iwl_legacy_eeprom_query16(priv, EEPROM_RADIO_CONFIG); | 
|  |  | 
|  | /* write radio config values to register */ | 
|  | if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX) | 
|  | iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, | 
|  | EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | | 
|  | EEPROM_RF_CFG_STEP_MSK(radio_cfg) | | 
|  | EEPROM_RF_CFG_DASH_MSK(radio_cfg)); | 
|  |  | 
|  | /* set CSR_HW_CONFIG_REG for uCode use */ | 
|  | iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG, | 
|  | CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | | 
|  | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); | 
|  |  | 
|  | priv->calib_info = (struct iwl_eeprom_calib_info *) | 
|  | iwl_legacy_eeprom_query_addr(priv, | 
|  | EEPROM_4965_CALIB_TXPOWER_OFFSET); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->lock, flags); | 
|  | } | 
|  |  | 
|  | /* Reset differential Rx gains in NIC to prepare for chain noise calibration. | 
|  | * Called after every association, but this runs only once! | 
|  | *  ... once chain noise is calibrated the first time, it's good forever.  */ | 
|  | static void iwl4965_chain_noise_reset(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_chain_noise_data *data = &(priv->chain_noise_data); | 
|  |  | 
|  | if ((data->state == IWL_CHAIN_NOISE_ALIVE) && | 
|  | iwl_legacy_is_any_associated(priv)) { | 
|  | struct iwl_calib_diff_gain_cmd cmd; | 
|  |  | 
|  | /* clear data for chain noise calibration algorithm */ | 
|  | data->chain_noise_a = 0; | 
|  | data->chain_noise_b = 0; | 
|  | data->chain_noise_c = 0; | 
|  | data->chain_signal_a = 0; | 
|  | data->chain_signal_b = 0; | 
|  | data->chain_signal_c = 0; | 
|  | data->beacon_count = 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD; | 
|  | cmd.diff_gain_a = 0; | 
|  | cmd.diff_gain_b = 0; | 
|  | cmd.diff_gain_c = 0; | 
|  | if (iwl_legacy_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, | 
|  | sizeof(cmd), &cmd)) | 
|  | IWL_ERR(priv, | 
|  | "Could not send REPLY_PHY_CALIBRATION_CMD\n"); | 
|  | data->state = IWL_CHAIN_NOISE_ACCUMULATE; | 
|  | IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct iwl_sensitivity_ranges iwl4965_sensitivity = { | 
|  | .min_nrg_cck = 97, | 
|  | .max_nrg_cck = 0, /* not used, set to 0 */ | 
|  |  | 
|  | .auto_corr_min_ofdm = 85, | 
|  | .auto_corr_min_ofdm_mrc = 170, | 
|  | .auto_corr_min_ofdm_x1 = 105, | 
|  | .auto_corr_min_ofdm_mrc_x1 = 220, | 
|  |  | 
|  | .auto_corr_max_ofdm = 120, | 
|  | .auto_corr_max_ofdm_mrc = 210, | 
|  | .auto_corr_max_ofdm_x1 = 140, | 
|  | .auto_corr_max_ofdm_mrc_x1 = 270, | 
|  |  | 
|  | .auto_corr_min_cck = 125, | 
|  | .auto_corr_max_cck = 200, | 
|  | .auto_corr_min_cck_mrc = 200, | 
|  | .auto_corr_max_cck_mrc = 400, | 
|  |  | 
|  | .nrg_th_cck = 100, | 
|  | .nrg_th_ofdm = 100, | 
|  |  | 
|  | .barker_corr_th_min = 190, | 
|  | .barker_corr_th_min_mrc = 390, | 
|  | .nrg_th_cca = 62, | 
|  | }; | 
|  |  | 
|  | static void iwl4965_set_ct_threshold(struct iwl_priv *priv) | 
|  | { | 
|  | /* want Kelvin */ | 
|  | priv->hw_params.ct_kill_threshold = | 
|  | CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_hw_set_hw_params | 
|  | * | 
|  | * Called when initializing driver | 
|  | */ | 
|  | static int iwl4965_hw_set_hw_params(struct iwl_priv *priv) | 
|  | { | 
|  | if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && | 
|  | priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES) | 
|  | priv->cfg->base_params->num_of_queues = | 
|  | priv->cfg->mod_params->num_of_queues; | 
|  |  | 
|  | priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues; | 
|  | priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; | 
|  | priv->hw_params.scd_bc_tbls_size = | 
|  | priv->cfg->base_params->num_of_queues * | 
|  | sizeof(struct iwl4965_scd_bc_tbl); | 
|  | priv->hw_params.tfd_size = sizeof(struct iwl_tfd); | 
|  | priv->hw_params.max_stations = IWL4965_STATION_COUNT; | 
|  | priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL4965_BROADCAST_ID; | 
|  | priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE; | 
|  | priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE; | 
|  | priv->hw_params.max_bsm_size = BSM_SRAM_SIZE; | 
|  | priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ); | 
|  |  | 
|  | priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; | 
|  |  | 
|  | priv->hw_params.tx_chains_num = iwl4965_num_of_ant(priv->cfg->valid_tx_ant); | 
|  | priv->hw_params.rx_chains_num = iwl4965_num_of_ant(priv->cfg->valid_rx_ant); | 
|  | priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; | 
|  | priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; | 
|  |  | 
|  | iwl4965_set_ct_threshold(priv); | 
|  |  | 
|  | priv->hw_params.sens = &iwl4965_sensitivity; | 
|  | priv->hw_params.beacon_time_tsf_bits = IWL4965_EXT_BEACON_TIME_POS; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) | 
|  | { | 
|  | s32 sign = 1; | 
|  |  | 
|  | if (num < 0) { | 
|  | sign = -sign; | 
|  | num = -num; | 
|  | } | 
|  | if (denom < 0) { | 
|  | sign = -sign; | 
|  | denom = -denom; | 
|  | } | 
|  | *res = 1; | 
|  | *res = ((num * 2 + denom) / (denom * 2)) * sign; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower | 
|  | * | 
|  | * Determines power supply voltage compensation for txpower calculations. | 
|  | * Returns number of 1/2-dB steps to subtract from gain table index, | 
|  | * to compensate for difference between power supply voltage during | 
|  | * factory measurements, vs. current power supply voltage. | 
|  | * | 
|  | * Voltage indication is higher for lower voltage. | 
|  | * Lower voltage requires more gain (lower gain table index). | 
|  | */ | 
|  | static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage, | 
|  | s32 current_voltage) | 
|  | { | 
|  | s32 comp = 0; | 
|  |  | 
|  | if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) || | 
|  | (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage)) | 
|  | return 0; | 
|  |  | 
|  | iwl4965_math_div_round(current_voltage - eeprom_voltage, | 
|  | TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp); | 
|  |  | 
|  | if (current_voltage > eeprom_voltage) | 
|  | comp *= 2; | 
|  | if ((comp < -2) || (comp > 2)) | 
|  | comp = 0; | 
|  |  | 
|  | return comp; | 
|  | } | 
|  |  | 
|  | static s32 iwl4965_get_tx_atten_grp(u16 channel) | 
|  | { | 
|  | if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH && | 
|  | channel <= CALIB_IWL_TX_ATTEN_GR5_LCH) | 
|  | return CALIB_CH_GROUP_5; | 
|  |  | 
|  | if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH && | 
|  | channel <= CALIB_IWL_TX_ATTEN_GR1_LCH) | 
|  | return CALIB_CH_GROUP_1; | 
|  |  | 
|  | if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH && | 
|  | channel <= CALIB_IWL_TX_ATTEN_GR2_LCH) | 
|  | return CALIB_CH_GROUP_2; | 
|  |  | 
|  | if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH && | 
|  | channel <= CALIB_IWL_TX_ATTEN_GR3_LCH) | 
|  | return CALIB_CH_GROUP_3; | 
|  |  | 
|  | if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH && | 
|  | channel <= CALIB_IWL_TX_ATTEN_GR4_LCH) | 
|  | return CALIB_CH_GROUP_4; | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel) | 
|  | { | 
|  | s32 b = -1; | 
|  |  | 
|  | for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) { | 
|  | if (priv->calib_info->band_info[b].ch_from == 0) | 
|  | continue; | 
|  |  | 
|  | if ((channel >= priv->calib_info->band_info[b].ch_from) | 
|  | && (channel <= priv->calib_info->band_info[b].ch_to)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return b; | 
|  | } | 
|  |  | 
|  | static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) | 
|  | { | 
|  | s32 val; | 
|  |  | 
|  | if (x2 == x1) | 
|  | return y1; | 
|  | else { | 
|  | iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val); | 
|  | return val + y2; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_interpolate_chan - Interpolate factory measurements for one channel | 
|  | * | 
|  | * Interpolates factory measurements from the two sample channels within a | 
|  | * sub-band, to apply to channel of interest.  Interpolation is proportional to | 
|  | * differences in channel frequencies, which is proportional to differences | 
|  | * in channel number. | 
|  | */ | 
|  | static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel, | 
|  | struct iwl_eeprom_calib_ch_info *chan_info) | 
|  | { | 
|  | s32 s = -1; | 
|  | u32 c; | 
|  | u32 m; | 
|  | const struct iwl_eeprom_calib_measure *m1; | 
|  | const struct iwl_eeprom_calib_measure *m2; | 
|  | struct iwl_eeprom_calib_measure *omeas; | 
|  | u32 ch_i1; | 
|  | u32 ch_i2; | 
|  |  | 
|  | s = iwl4965_get_sub_band(priv, channel); | 
|  | if (s >= EEPROM_TX_POWER_BANDS) { | 
|  | IWL_ERR(priv, "Tx Power can not find channel %d\n", channel); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ch_i1 = priv->calib_info->band_info[s].ch1.ch_num; | 
|  | ch_i2 = priv->calib_info->band_info[s].ch2.ch_num; | 
|  | chan_info->ch_num = (u8) channel; | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n", | 
|  | channel, s, ch_i1, ch_i2); | 
|  |  | 
|  | for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) { | 
|  | for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) { | 
|  | m1 = &(priv->calib_info->band_info[s].ch1. | 
|  | measurements[c][m]); | 
|  | m2 = &(priv->calib_info->band_info[s].ch2. | 
|  | measurements[c][m]); | 
|  | omeas = &(chan_info->measurements[c][m]); | 
|  |  | 
|  | omeas->actual_pow = | 
|  | (u8) iwl4965_interpolate_value(channel, ch_i1, | 
|  | m1->actual_pow, | 
|  | ch_i2, | 
|  | m2->actual_pow); | 
|  | omeas->gain_idx = | 
|  | (u8) iwl4965_interpolate_value(channel, ch_i1, | 
|  | m1->gain_idx, ch_i2, | 
|  | m2->gain_idx); | 
|  | omeas->temperature = | 
|  | (u8) iwl4965_interpolate_value(channel, ch_i1, | 
|  | m1->temperature, | 
|  | ch_i2, | 
|  | m2->temperature); | 
|  | omeas->pa_det = | 
|  | (s8) iwl4965_interpolate_value(channel, ch_i1, | 
|  | m1->pa_det, ch_i2, | 
|  | m2->pa_det); | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, | 
|  | "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m, | 
|  | m1->actual_pow, m2->actual_pow, omeas->actual_pow); | 
|  | IWL_DEBUG_TXPOWER(priv, | 
|  | "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m, | 
|  | m1->gain_idx, m2->gain_idx, omeas->gain_idx); | 
|  | IWL_DEBUG_TXPOWER(priv, | 
|  | "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m, | 
|  | m1->pa_det, m2->pa_det, omeas->pa_det); | 
|  | IWL_DEBUG_TXPOWER(priv, | 
|  | "chain %d meas %d  T1=%d  T2=%d  T=%d\n", c, m, | 
|  | m1->temperature, m2->temperature, | 
|  | omeas->temperature); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* bit-rate-dependent table to prevent Tx distortion, in half-dB units, | 
|  | * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */ | 
|  | static s32 back_off_table[] = { | 
|  | 10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM SISO 20 MHz */ | 
|  | 10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM MIMO 20 MHz */ | 
|  | 10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM SISO 40 MHz */ | 
|  | 10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM MIMO 40 MHz */ | 
|  | 10			/* CCK */ | 
|  | }; | 
|  |  | 
|  | /* Thermal compensation values for txpower for various frequency ranges ... | 
|  | *   ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */ | 
|  | static struct iwl4965_txpower_comp_entry { | 
|  | s32 degrees_per_05db_a; | 
|  | s32 degrees_per_05db_a_denom; | 
|  | } tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = { | 
|  | {9, 2},			/* group 0 5.2, ch  34-43 */ | 
|  | {4, 1},			/* group 1 5.2, ch  44-70 */ | 
|  | {4, 1},			/* group 2 5.2, ch  71-124 */ | 
|  | {4, 1},			/* group 3 5.2, ch 125-200 */ | 
|  | {3, 1}			/* group 4 2.4, ch   all */ | 
|  | }; | 
|  |  | 
|  | static s32 get_min_power_index(s32 rate_power_index, u32 band) | 
|  | { | 
|  | if (!band) { | 
|  | if ((rate_power_index & 7) <= 4) | 
|  | return MIN_TX_GAIN_INDEX_52GHZ_EXT; | 
|  | } | 
|  | return MIN_TX_GAIN_INDEX; | 
|  | } | 
|  |  | 
|  | struct gain_entry { | 
|  | u8 dsp; | 
|  | u8 radio; | 
|  | }; | 
|  |  | 
|  | static const struct gain_entry gain_table[2][108] = { | 
|  | /* 5.2GHz power gain index table */ | 
|  | { | 
|  | {123, 0x3F},		/* highest txpower */ | 
|  | {117, 0x3F}, | 
|  | {110, 0x3F}, | 
|  | {104, 0x3F}, | 
|  | {98, 0x3F}, | 
|  | {110, 0x3E}, | 
|  | {104, 0x3E}, | 
|  | {98, 0x3E}, | 
|  | {110, 0x3D}, | 
|  | {104, 0x3D}, | 
|  | {98, 0x3D}, | 
|  | {110, 0x3C}, | 
|  | {104, 0x3C}, | 
|  | {98, 0x3C}, | 
|  | {110, 0x3B}, | 
|  | {104, 0x3B}, | 
|  | {98, 0x3B}, | 
|  | {110, 0x3A}, | 
|  | {104, 0x3A}, | 
|  | {98, 0x3A}, | 
|  | {110, 0x39}, | 
|  | {104, 0x39}, | 
|  | {98, 0x39}, | 
|  | {110, 0x38}, | 
|  | {104, 0x38}, | 
|  | {98, 0x38}, | 
|  | {110, 0x37}, | 
|  | {104, 0x37}, | 
|  | {98, 0x37}, | 
|  | {110, 0x36}, | 
|  | {104, 0x36}, | 
|  | {98, 0x36}, | 
|  | {110, 0x35}, | 
|  | {104, 0x35}, | 
|  | {98, 0x35}, | 
|  | {110, 0x34}, | 
|  | {104, 0x34}, | 
|  | {98, 0x34}, | 
|  | {110, 0x33}, | 
|  | {104, 0x33}, | 
|  | {98, 0x33}, | 
|  | {110, 0x32}, | 
|  | {104, 0x32}, | 
|  | {98, 0x32}, | 
|  | {110, 0x31}, | 
|  | {104, 0x31}, | 
|  | {98, 0x31}, | 
|  | {110, 0x30}, | 
|  | {104, 0x30}, | 
|  | {98, 0x30}, | 
|  | {110, 0x25}, | 
|  | {104, 0x25}, | 
|  | {98, 0x25}, | 
|  | {110, 0x24}, | 
|  | {104, 0x24}, | 
|  | {98, 0x24}, | 
|  | {110, 0x23}, | 
|  | {104, 0x23}, | 
|  | {98, 0x23}, | 
|  | {110, 0x22}, | 
|  | {104, 0x18}, | 
|  | {98, 0x18}, | 
|  | {110, 0x17}, | 
|  | {104, 0x17}, | 
|  | {98, 0x17}, | 
|  | {110, 0x16}, | 
|  | {104, 0x16}, | 
|  | {98, 0x16}, | 
|  | {110, 0x15}, | 
|  | {104, 0x15}, | 
|  | {98, 0x15}, | 
|  | {110, 0x14}, | 
|  | {104, 0x14}, | 
|  | {98, 0x14}, | 
|  | {110, 0x13}, | 
|  | {104, 0x13}, | 
|  | {98, 0x13}, | 
|  | {110, 0x12}, | 
|  | {104, 0x08}, | 
|  | {98, 0x08}, | 
|  | {110, 0x07}, | 
|  | {104, 0x07}, | 
|  | {98, 0x07}, | 
|  | {110, 0x06}, | 
|  | {104, 0x06}, | 
|  | {98, 0x06}, | 
|  | {110, 0x05}, | 
|  | {104, 0x05}, | 
|  | {98, 0x05}, | 
|  | {110, 0x04}, | 
|  | {104, 0x04}, | 
|  | {98, 0x04}, | 
|  | {110, 0x03}, | 
|  | {104, 0x03}, | 
|  | {98, 0x03}, | 
|  | {110, 0x02}, | 
|  | {104, 0x02}, | 
|  | {98, 0x02}, | 
|  | {110, 0x01}, | 
|  | {104, 0x01}, | 
|  | {98, 0x01}, | 
|  | {110, 0x00}, | 
|  | {104, 0x00}, | 
|  | {98, 0x00}, | 
|  | {93, 0x00}, | 
|  | {88, 0x00}, | 
|  | {83, 0x00}, | 
|  | {78, 0x00}, | 
|  | }, | 
|  | /* 2.4GHz power gain index table */ | 
|  | { | 
|  | {110, 0x3f},		/* highest txpower */ | 
|  | {104, 0x3f}, | 
|  | {98, 0x3f}, | 
|  | {110, 0x3e}, | 
|  | {104, 0x3e}, | 
|  | {98, 0x3e}, | 
|  | {110, 0x3d}, | 
|  | {104, 0x3d}, | 
|  | {98, 0x3d}, | 
|  | {110, 0x3c}, | 
|  | {104, 0x3c}, | 
|  | {98, 0x3c}, | 
|  | {110, 0x3b}, | 
|  | {104, 0x3b}, | 
|  | {98, 0x3b}, | 
|  | {110, 0x3a}, | 
|  | {104, 0x3a}, | 
|  | {98, 0x3a}, | 
|  | {110, 0x39}, | 
|  | {104, 0x39}, | 
|  | {98, 0x39}, | 
|  | {110, 0x38}, | 
|  | {104, 0x38}, | 
|  | {98, 0x38}, | 
|  | {110, 0x37}, | 
|  | {104, 0x37}, | 
|  | {98, 0x37}, | 
|  | {110, 0x36}, | 
|  | {104, 0x36}, | 
|  | {98, 0x36}, | 
|  | {110, 0x35}, | 
|  | {104, 0x35}, | 
|  | {98, 0x35}, | 
|  | {110, 0x34}, | 
|  | {104, 0x34}, | 
|  | {98, 0x34}, | 
|  | {110, 0x33}, | 
|  | {104, 0x33}, | 
|  | {98, 0x33}, | 
|  | {110, 0x32}, | 
|  | {104, 0x32}, | 
|  | {98, 0x32}, | 
|  | {110, 0x31}, | 
|  | {104, 0x31}, | 
|  | {98, 0x31}, | 
|  | {110, 0x30}, | 
|  | {104, 0x30}, | 
|  | {98, 0x30}, | 
|  | {110, 0x6}, | 
|  | {104, 0x6}, | 
|  | {98, 0x6}, | 
|  | {110, 0x5}, | 
|  | {104, 0x5}, | 
|  | {98, 0x5}, | 
|  | {110, 0x4}, | 
|  | {104, 0x4}, | 
|  | {98, 0x4}, | 
|  | {110, 0x3}, | 
|  | {104, 0x3}, | 
|  | {98, 0x3}, | 
|  | {110, 0x2}, | 
|  | {104, 0x2}, | 
|  | {98, 0x2}, | 
|  | {110, 0x1}, | 
|  | {104, 0x1}, | 
|  | {98, 0x1}, | 
|  | {110, 0x0}, | 
|  | {104, 0x0}, | 
|  | {98, 0x0}, | 
|  | {97, 0}, | 
|  | {96, 0}, | 
|  | {95, 0}, | 
|  | {94, 0}, | 
|  | {93, 0}, | 
|  | {92, 0}, | 
|  | {91, 0}, | 
|  | {90, 0}, | 
|  | {89, 0}, | 
|  | {88, 0}, | 
|  | {87, 0}, | 
|  | {86, 0}, | 
|  | {85, 0}, | 
|  | {84, 0}, | 
|  | {83, 0}, | 
|  | {82, 0}, | 
|  | {81, 0}, | 
|  | {80, 0}, | 
|  | {79, 0}, | 
|  | {78, 0}, | 
|  | {77, 0}, | 
|  | {76, 0}, | 
|  | {75, 0}, | 
|  | {74, 0}, | 
|  | {73, 0}, | 
|  | {72, 0}, | 
|  | {71, 0}, | 
|  | {70, 0}, | 
|  | {69, 0}, | 
|  | {68, 0}, | 
|  | {67, 0}, | 
|  | {66, 0}, | 
|  | {65, 0}, | 
|  | {64, 0}, | 
|  | {63, 0}, | 
|  | {62, 0}, | 
|  | {61, 0}, | 
|  | {60, 0}, | 
|  | {59, 0}, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, | 
|  | u8 is_ht40, u8 ctrl_chan_high, | 
|  | struct iwl4965_tx_power_db *tx_power_tbl) | 
|  | { | 
|  | u8 saturation_power; | 
|  | s32 target_power; | 
|  | s32 user_target_power; | 
|  | s32 power_limit; | 
|  | s32 current_temp; | 
|  | s32 reg_limit; | 
|  | s32 current_regulatory; | 
|  | s32 txatten_grp = CALIB_CH_GROUP_MAX; | 
|  | int i; | 
|  | int c; | 
|  | const struct iwl_channel_info *ch_info = NULL; | 
|  | struct iwl_eeprom_calib_ch_info ch_eeprom_info; | 
|  | const struct iwl_eeprom_calib_measure *measurement; | 
|  | s16 voltage; | 
|  | s32 init_voltage; | 
|  | s32 voltage_compensation; | 
|  | s32 degrees_per_05db_num; | 
|  | s32 degrees_per_05db_denom; | 
|  | s32 factory_temp; | 
|  | s32 temperature_comp[2]; | 
|  | s32 factory_gain_index[2]; | 
|  | s32 factory_actual_pwr[2]; | 
|  | s32 power_index; | 
|  |  | 
|  | /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units | 
|  | *   are used for indexing into txpower table) */ | 
|  | user_target_power = 2 * priv->tx_power_user_lmt; | 
|  |  | 
|  | /* Get current (RXON) channel, band, width */ | 
|  | IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band, | 
|  | is_ht40); | 
|  |  | 
|  | ch_info = iwl_legacy_get_channel_info(priv, priv->band, channel); | 
|  |  | 
|  | if (!iwl_legacy_is_channel_valid(ch_info)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* get txatten group, used to select 1) thermal txpower adjustment | 
|  | *   and 2) mimo txpower balance between Tx chains. */ | 
|  | txatten_grp = iwl4965_get_tx_atten_grp(channel); | 
|  | if (txatten_grp < 0) { | 
|  | IWL_ERR(priv, "Can't find txatten group for channel %d.\n", | 
|  | channel); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n", | 
|  | channel, txatten_grp); | 
|  |  | 
|  | if (is_ht40) { | 
|  | if (ctrl_chan_high) | 
|  | channel -= 2; | 
|  | else | 
|  | channel += 2; | 
|  | } | 
|  |  | 
|  | /* hardware txpower limits ... | 
|  | * saturation (clipping distortion) txpowers are in half-dBm */ | 
|  | if (band) | 
|  | saturation_power = priv->calib_info->saturation_power24; | 
|  | else | 
|  | saturation_power = priv->calib_info->saturation_power52; | 
|  |  | 
|  | if (saturation_power < IWL_TX_POWER_SATURATION_MIN || | 
|  | saturation_power > IWL_TX_POWER_SATURATION_MAX) { | 
|  | if (band) | 
|  | saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24; | 
|  | else | 
|  | saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52; | 
|  | } | 
|  |  | 
|  | /* regulatory txpower limits ... reg_limit values are in half-dBm, | 
|  | *   max_power_avg values are in dBm, convert * 2 */ | 
|  | if (is_ht40) | 
|  | reg_limit = ch_info->ht40_max_power_avg * 2; | 
|  | else | 
|  | reg_limit = ch_info->max_power_avg * 2; | 
|  |  | 
|  | if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) || | 
|  | (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) { | 
|  | if (band) | 
|  | reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24; | 
|  | else | 
|  | reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52; | 
|  | } | 
|  |  | 
|  | /* Interpolate txpower calibration values for this channel, | 
|  | *   based on factory calibration tests on spaced channels. */ | 
|  | iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info); | 
|  |  | 
|  | /* calculate tx gain adjustment based on power supply voltage */ | 
|  | voltage = le16_to_cpu(priv->calib_info->voltage); | 
|  | init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage); | 
|  | voltage_compensation = | 
|  | iwl4965_get_voltage_compensation(voltage, init_voltage); | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n", | 
|  | init_voltage, | 
|  | voltage, voltage_compensation); | 
|  |  | 
|  | /* get current temperature (Celsius) */ | 
|  | current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN); | 
|  | current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX); | 
|  | current_temp = KELVIN_TO_CELSIUS(current_temp); | 
|  |  | 
|  | /* select thermal txpower adjustment params, based on channel group | 
|  | *   (same frequency group used for mimo txatten adjustment) */ | 
|  | degrees_per_05db_num = | 
|  | tx_power_cmp_tble[txatten_grp].degrees_per_05db_a; | 
|  | degrees_per_05db_denom = | 
|  | tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom; | 
|  |  | 
|  | /* get per-chain txpower values from factory measurements */ | 
|  | for (c = 0; c < 2; c++) { | 
|  | measurement = &ch_eeprom_info.measurements[c][1]; | 
|  |  | 
|  | /* txgain adjustment (in half-dB steps) based on difference | 
|  | *   between factory and current temperature */ | 
|  | factory_temp = measurement->temperature; | 
|  | iwl4965_math_div_round((current_temp - factory_temp) * | 
|  | degrees_per_05db_denom, | 
|  | degrees_per_05db_num, | 
|  | &temperature_comp[c]); | 
|  |  | 
|  | factory_gain_index[c] = measurement->gain_idx; | 
|  | factory_actual_pwr[c] = measurement->actual_pow; | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c); | 
|  | IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, " | 
|  | "curr tmp %d, comp %d steps\n", | 
|  | factory_temp, current_temp, | 
|  | temperature_comp[c]); | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n", | 
|  | factory_gain_index[c], | 
|  | factory_actual_pwr[c]); | 
|  | } | 
|  |  | 
|  | /* for each of 33 bit-rates (including 1 for CCK) */ | 
|  | for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) { | 
|  | u8 is_mimo_rate; | 
|  | union iwl4965_tx_power_dual_stream tx_power; | 
|  |  | 
|  | /* for mimo, reduce each chain's txpower by half | 
|  | * (3dB, 6 steps), so total output power is regulatory | 
|  | * compliant. */ | 
|  | if (i & 0x8) { | 
|  | current_regulatory = reg_limit - | 
|  | IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION; | 
|  | is_mimo_rate = 1; | 
|  | } else { | 
|  | current_regulatory = reg_limit; | 
|  | is_mimo_rate = 0; | 
|  | } | 
|  |  | 
|  | /* find txpower limit, either hardware or regulatory */ | 
|  | power_limit = saturation_power - back_off_table[i]; | 
|  | if (power_limit > current_regulatory) | 
|  | power_limit = current_regulatory; | 
|  |  | 
|  | /* reduce user's txpower request if necessary | 
|  | * for this rate on this channel */ | 
|  | target_power = user_target_power; | 
|  | if (target_power > power_limit) | 
|  | target_power = power_limit; | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n", | 
|  | i, saturation_power - back_off_table[i], | 
|  | current_regulatory, user_target_power, | 
|  | target_power); | 
|  |  | 
|  | /* for each of 2 Tx chains (radio transmitters) */ | 
|  | for (c = 0; c < 2; c++) { | 
|  | s32 atten_value; | 
|  |  | 
|  | if (is_mimo_rate) | 
|  | atten_value = | 
|  | (s32)le32_to_cpu(priv->card_alive_init. | 
|  | tx_atten[txatten_grp][c]); | 
|  | else | 
|  | atten_value = 0; | 
|  |  | 
|  | /* calculate index; higher index means lower txpower */ | 
|  | power_index = (u8) (factory_gain_index[c] - | 
|  | (target_power - | 
|  | factory_actual_pwr[c]) - | 
|  | temperature_comp[c] - | 
|  | voltage_compensation + | 
|  | atten_value); | 
|  |  | 
|  | /*			IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n", | 
|  | power_index); */ | 
|  |  | 
|  | if (power_index < get_min_power_index(i, band)) | 
|  | power_index = get_min_power_index(i, band); | 
|  |  | 
|  | /* adjust 5 GHz index to support negative indexes */ | 
|  | if (!band) | 
|  | power_index += 9; | 
|  |  | 
|  | /* CCK, rate 32, reduce txpower for CCK */ | 
|  | if (i == POWER_TABLE_CCK_ENTRY) | 
|  | power_index += | 
|  | IWL_TX_POWER_CCK_COMPENSATION_C_STEP; | 
|  |  | 
|  | /* stay within the table! */ | 
|  | if (power_index > 107) { | 
|  | IWL_WARN(priv, "txpower index %d > 107\n", | 
|  | power_index); | 
|  | power_index = 107; | 
|  | } | 
|  | if (power_index < 0) { | 
|  | IWL_WARN(priv, "txpower index %d < 0\n", | 
|  | power_index); | 
|  | power_index = 0; | 
|  | } | 
|  |  | 
|  | /* fill txpower command for this rate/chain */ | 
|  | tx_power.s.radio_tx_gain[c] = | 
|  | gain_table[band][power_index].radio; | 
|  | tx_power.s.dsp_predis_atten[c] = | 
|  | gain_table[band][power_index].dsp; | 
|  |  | 
|  | IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d " | 
|  | "gain 0x%02x dsp %d\n", | 
|  | c, atten_value, power_index, | 
|  | tx_power.s.radio_tx_gain[c], | 
|  | tx_power.s.dsp_predis_atten[c]); | 
|  | } /* for each chain */ | 
|  |  | 
|  | tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); | 
|  |  | 
|  | } /* for each rate */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_send_tx_power - Configure the TXPOWER level user limit | 
|  | * | 
|  | * Uses the active RXON for channel, band, and characteristics (ht40, high) | 
|  | * The power limit is taken from priv->tx_power_user_lmt. | 
|  | */ | 
|  | static int iwl4965_send_tx_power(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl4965_txpowertable_cmd cmd = { 0 }; | 
|  | int ret; | 
|  | u8 band = 0; | 
|  | bool is_ht40 = false; | 
|  | u8 ctrl_chan_high = 0; | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  |  | 
|  | if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), | 
|  | "TX Power requested while scanning!\n")) | 
|  | return -EAGAIN; | 
|  |  | 
|  | band = priv->band == IEEE80211_BAND_2GHZ; | 
|  |  | 
|  | is_ht40 = iw4965_is_ht40_channel(ctx->active.flags); | 
|  |  | 
|  | if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) | 
|  | ctrl_chan_high = 1; | 
|  |  | 
|  | cmd.band = band; | 
|  | cmd.channel = ctx->active.channel; | 
|  |  | 
|  | ret = iwl4965_fill_txpower_tbl(priv, band, | 
|  | le16_to_cpu(ctx->active.channel), | 
|  | is_ht40, ctrl_chan_high, &cmd.tx_power); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ret = iwl_legacy_send_cmd_pdu(priv, | 
|  | REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwl4965_send_rxon_assoc(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | int ret = 0; | 
|  | struct iwl4965_rxon_assoc_cmd rxon_assoc; | 
|  | const struct iwl_legacy_rxon_cmd *rxon1 = &ctx->staging; | 
|  | const struct iwl_legacy_rxon_cmd *rxon2 = &ctx->active; | 
|  |  | 
|  | if ((rxon1->flags == rxon2->flags) && | 
|  | (rxon1->filter_flags == rxon2->filter_flags) && | 
|  | (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && | 
|  | (rxon1->ofdm_ht_single_stream_basic_rates == | 
|  | rxon2->ofdm_ht_single_stream_basic_rates) && | 
|  | (rxon1->ofdm_ht_dual_stream_basic_rates == | 
|  | rxon2->ofdm_ht_dual_stream_basic_rates) && | 
|  | (rxon1->rx_chain == rxon2->rx_chain) && | 
|  | (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { | 
|  | IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | rxon_assoc.flags = ctx->staging.flags; | 
|  | rxon_assoc.filter_flags = ctx->staging.filter_flags; | 
|  | rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; | 
|  | rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; | 
|  | rxon_assoc.reserved = 0; | 
|  | rxon_assoc.ofdm_ht_single_stream_basic_rates = | 
|  | ctx->staging.ofdm_ht_single_stream_basic_rates; | 
|  | rxon_assoc.ofdm_ht_dual_stream_basic_rates = | 
|  | ctx->staging.ofdm_ht_dual_stream_basic_rates; | 
|  | rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain; | 
|  |  | 
|  | ret = iwl_legacy_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC, | 
|  | sizeof(rxon_assoc), &rxon_assoc, NULL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) | 
|  | { | 
|  | /* cast away the const for active_rxon in this function */ | 
|  | struct iwl_legacy_rxon_cmd *active_rxon = (void *)&ctx->active; | 
|  | int ret; | 
|  | bool new_assoc = | 
|  | !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); | 
|  |  | 
|  | if (!iwl_legacy_is_alive(priv)) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (!ctx->is_active) | 
|  | return 0; | 
|  |  | 
|  | /* always get timestamp with Rx frame */ | 
|  | ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; | 
|  |  | 
|  | ret = iwl_legacy_check_rxon_cmd(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * receive commit_rxon request | 
|  | * abort any previous channel switch if still in process | 
|  | */ | 
|  | if (priv->switch_rxon.switch_in_progress && | 
|  | (priv->switch_rxon.channel != ctx->staging.channel)) { | 
|  | IWL_DEBUG_11H(priv, "abort channel switch on %d\n", | 
|  | le16_to_cpu(priv->switch_rxon.channel)); | 
|  | iwl_legacy_chswitch_done(priv, false); | 
|  | } | 
|  |  | 
|  | /* If we don't need to send a full RXON, we can use | 
|  | * iwl_rxon_assoc_cmd which is used to reconfigure filter | 
|  | * and other flags for the current radio configuration. */ | 
|  | if (!iwl_legacy_full_rxon_required(priv, ctx)) { | 
|  | ret = iwl_legacy_send_rxon_assoc(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); | 
|  | iwl_legacy_print_rx_config_cmd(priv, ctx); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* If we are currently associated and the new config requires | 
|  | * an RXON_ASSOC and the new config wants the associated mask enabled, | 
|  | * we must clear the associated from the active configuration | 
|  | * before we apply the new config */ | 
|  | if (iwl_legacy_is_associated_ctx(ctx) && new_assoc) { | 
|  | IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n"); | 
|  | active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  |  | 
|  | ret = iwl_legacy_send_cmd_pdu(priv, ctx->rxon_cmd, | 
|  | sizeof(struct iwl_legacy_rxon_cmd), | 
|  | active_rxon); | 
|  |  | 
|  | /* If the mask clearing failed then we set | 
|  | * active_rxon back to what it was previously */ | 
|  | if (ret) { | 
|  | active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  | iwl_legacy_clear_ucode_stations(priv, ctx); | 
|  | iwl_legacy_restore_stations(priv, ctx); | 
|  | ret = iwl4965_restore_default_wep_keys(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Sending RXON\n" | 
|  | "* with%s RXON_FILTER_ASSOC_MSK\n" | 
|  | "* channel = %d\n" | 
|  | "* bssid = %pM\n", | 
|  | (new_assoc ? "" : "out"), | 
|  | le16_to_cpu(ctx->staging.channel), | 
|  | ctx->staging.bssid_addr); | 
|  |  | 
|  | iwl_legacy_set_rxon_hwcrypto(priv, ctx, | 
|  | !priv->cfg->mod_params->sw_crypto); | 
|  |  | 
|  | /* Apply the new configuration | 
|  | * RXON unassoc clears the station table in uCode so restoration of | 
|  | * stations is needed after it (the RXON command) completes | 
|  | */ | 
|  | if (!new_assoc) { | 
|  | ret = iwl_legacy_send_cmd_pdu(priv, ctx->rxon_cmd, | 
|  | sizeof(struct iwl_legacy_rxon_cmd), &ctx->staging); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  | IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n"); | 
|  | memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); | 
|  | iwl_legacy_clear_ucode_stations(priv, ctx); | 
|  | iwl_legacy_restore_stations(priv, ctx); | 
|  | ret = iwl4965_restore_default_wep_keys(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | if (new_assoc) { | 
|  | priv->start_calib = 0; | 
|  | /* Apply the new configuration | 
|  | * RXON assoc doesn't clear the station table in uCode, | 
|  | */ | 
|  | ret = iwl_legacy_send_cmd_pdu(priv, ctx->rxon_cmd, | 
|  | sizeof(struct iwl_legacy_rxon_cmd), &ctx->staging); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  | memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); | 
|  | } | 
|  | iwl_legacy_print_rx_config_cmd(priv, ctx); | 
|  |  | 
|  | iwl4965_init_sensitivity(priv); | 
|  |  | 
|  | /* If we issue a new RXON command which required a tune then we must | 
|  | * send a new TXPOWER command or we won't be able to Tx any frames */ | 
|  | ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error sending TX power (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl4965_hw_channel_switch(struct iwl_priv *priv, | 
|  | struct ieee80211_channel_switch *ch_switch) | 
|  | { | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | int rc; | 
|  | u8 band = 0; | 
|  | bool is_ht40 = false; | 
|  | u8 ctrl_chan_high = 0; | 
|  | struct iwl4965_channel_switch_cmd cmd; | 
|  | const struct iwl_channel_info *ch_info; | 
|  | u32 switch_time_in_usec, ucode_switch_time; | 
|  | u16 ch; | 
|  | u32 tsf_low; | 
|  | u8 switch_count; | 
|  | u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  | band = priv->band == IEEE80211_BAND_2GHZ; | 
|  |  | 
|  | is_ht40 = iw4965_is_ht40_channel(ctx->staging.flags); | 
|  |  | 
|  | if (is_ht40 && | 
|  | (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK)) | 
|  | ctrl_chan_high = 1; | 
|  |  | 
|  | cmd.band = band; | 
|  | cmd.expect_beacon = 0; | 
|  | ch = ch_switch->channel->hw_value; | 
|  | cmd.channel = cpu_to_le16(ch); | 
|  | cmd.rxon_flags = ctx->staging.flags; | 
|  | cmd.rxon_filter_flags = ctx->staging.filter_flags; | 
|  | switch_count = ch_switch->count; | 
|  | tsf_low = ch_switch->timestamp & 0x0ffffffff; | 
|  | /* | 
|  | * calculate the ucode channel switch time | 
|  | * adding TSF as one of the factor for when to switch | 
|  | */ | 
|  | if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { | 
|  | if (switch_count > ((priv->ucode_beacon_time - tsf_low) / | 
|  | beacon_interval)) { | 
|  | switch_count -= (priv->ucode_beacon_time - | 
|  | tsf_low) / beacon_interval; | 
|  | } else | 
|  | switch_count = 0; | 
|  | } | 
|  | if (switch_count <= 1) | 
|  | cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); | 
|  | else { | 
|  | switch_time_in_usec = | 
|  | vif->bss_conf.beacon_int * switch_count * TIME_UNIT; | 
|  | ucode_switch_time = iwl_legacy_usecs_to_beacons(priv, | 
|  | switch_time_in_usec, | 
|  | beacon_interval); | 
|  | cmd.switch_time = iwl_legacy_add_beacon_time(priv, | 
|  | priv->ucode_beacon_time, | 
|  | ucode_switch_time, | 
|  | beacon_interval); | 
|  | } | 
|  | IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", | 
|  | cmd.switch_time); | 
|  | ch_info = iwl_legacy_get_channel_info(priv, priv->band, ch); | 
|  | if (ch_info) | 
|  | cmd.expect_beacon = iwl_legacy_is_channel_radar(ch_info); | 
|  | else { | 
|  | IWL_ERR(priv, "invalid channel switch from %u to %u\n", | 
|  | ctx->active.channel, ch); | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | rc = iwl4965_fill_txpower_tbl(priv, band, ch, is_ht40, | 
|  | ctrl_chan_high, &cmd.tx_power); | 
|  | if (rc) { | 
|  | IWL_DEBUG_11H(priv, "error:%d  fill txpower_tbl\n", rc); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | priv->switch_rxon.channel = cmd.channel; | 
|  | priv->switch_rxon.switch_in_progress = true; | 
|  |  | 
|  | return iwl_legacy_send_cmd_pdu(priv, | 
|  | REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array | 
|  | */ | 
|  | static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv, | 
|  | struct iwl_tx_queue *txq, | 
|  | u16 byte_cnt) | 
|  | { | 
|  | struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr; | 
|  | int txq_id = txq->q.id; | 
|  | int write_ptr = txq->q.write_ptr; | 
|  | int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; | 
|  | __le16 bc_ent; | 
|  |  | 
|  | WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX); | 
|  |  | 
|  | bc_ent = cpu_to_le16(len & 0xFFF); | 
|  | /* Set up byte count within first 256 entries */ | 
|  | scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; | 
|  |  | 
|  | /* If within first 64 entries, duplicate at end */ | 
|  | if (write_ptr < TFD_QUEUE_SIZE_BC_DUP) | 
|  | scd_bc_tbl[txq_id]. | 
|  | tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin) | 
|  | * @statistics: Provides the temperature reading from the uCode | 
|  | * | 
|  | * A return of <0 indicates bogus data in the statistics | 
|  | */ | 
|  | static int iwl4965_hw_get_temperature(struct iwl_priv *priv) | 
|  | { | 
|  | s32 temperature; | 
|  | s32 vt; | 
|  | s32 R1, R2, R3; | 
|  | u32 R4; | 
|  |  | 
|  | if (test_bit(STATUS_TEMPERATURE, &priv->status) && | 
|  | (priv->_4965.statistics.flag & | 
|  | STATISTICS_REPLY_FLG_HT40_MODE_MSK)) { | 
|  | IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n"); | 
|  | R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]); | 
|  | R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]); | 
|  | R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]); | 
|  | R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]); | 
|  | } else { | 
|  | IWL_DEBUG_TEMP(priv, "Running temperature calibration\n"); | 
|  | R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]); | 
|  | R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]); | 
|  | R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]); | 
|  | R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Temperature is only 23 bits, so sign extend out to 32. | 
|  | * | 
|  | * NOTE If we haven't received a statistics notification yet | 
|  | * with an updated temperature, use R4 provided to us in the | 
|  | * "initialize" ALIVE response. | 
|  | */ | 
|  | if (!test_bit(STATUS_TEMPERATURE, &priv->status)) | 
|  | vt = sign_extend32(R4, 23); | 
|  | else | 
|  | vt = sign_extend32(le32_to_cpu(priv->_4965.statistics. | 
|  | general.common.temperature), 23); | 
|  |  | 
|  | IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt); | 
|  |  | 
|  | if (R3 == R1) { | 
|  | IWL_ERR(priv, "Calibration conflict R1 == R3\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* Calculate temperature in degrees Kelvin, adjust by 97%. | 
|  | * Add offset to center the adjustment around 0 degrees Centigrade. */ | 
|  | temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2); | 
|  | temperature /= (R3 - R1); | 
|  | temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET; | 
|  |  | 
|  | IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n", | 
|  | temperature, KELVIN_TO_CELSIUS(temperature)); | 
|  |  | 
|  | return temperature; | 
|  | } | 
|  |  | 
|  | /* Adjust Txpower only if temperature variance is greater than threshold. */ | 
|  | #define IWL_TEMPERATURE_THRESHOLD   3 | 
|  |  | 
|  | /** | 
|  | * iwl4965_is_temp_calib_needed - determines if new calibration is needed | 
|  | * | 
|  | * If the temperature changed has changed sufficiently, then a recalibration | 
|  | * is needed. | 
|  | * | 
|  | * Assumes caller will replace priv->last_temperature once calibration | 
|  | * executed. | 
|  | */ | 
|  | static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv) | 
|  | { | 
|  | int temp_diff; | 
|  |  | 
|  | if (!test_bit(STATUS_STATISTICS, &priv->status)) { | 
|  | IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | temp_diff = priv->temperature - priv->last_temperature; | 
|  |  | 
|  | /* get absolute value */ | 
|  | if (temp_diff < 0) { | 
|  | IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff); | 
|  | temp_diff = -temp_diff; | 
|  | } else if (temp_diff == 0) | 
|  | IWL_DEBUG_POWER(priv, "Temperature unchanged\n"); | 
|  | else | 
|  | IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff); | 
|  |  | 
|  | if (temp_diff < IWL_TEMPERATURE_THRESHOLD) { | 
|  | IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n"); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void iwl4965_temperature_calib(struct iwl_priv *priv) | 
|  | { | 
|  | s32 temp; | 
|  |  | 
|  | temp = iwl4965_hw_get_temperature(priv); | 
|  | if (temp < 0) | 
|  | return; | 
|  |  | 
|  | if (priv->temperature != temp) { | 
|  | if (priv->temperature) | 
|  | IWL_DEBUG_TEMP(priv, "Temperature changed " | 
|  | "from %dC to %dC\n", | 
|  | KELVIN_TO_CELSIUS(priv->temperature), | 
|  | KELVIN_TO_CELSIUS(temp)); | 
|  | else | 
|  | IWL_DEBUG_TEMP(priv, "Temperature " | 
|  | "initialized to %dC\n", | 
|  | KELVIN_TO_CELSIUS(temp)); | 
|  | } | 
|  |  | 
|  | priv->temperature = temp; | 
|  | set_bit(STATUS_TEMPERATURE, &priv->status); | 
|  |  | 
|  | if (!priv->disable_tx_power_cal && | 
|  | unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && | 
|  | iwl4965_is_temp_calib_needed(priv)) | 
|  | queue_work(priv->workqueue, &priv->txpower_work); | 
|  | } | 
|  |  | 
|  | static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) | 
|  | { | 
|  | switch (cmd_id) { | 
|  | case REPLY_RXON: | 
|  | return (u16) sizeof(struct iwl4965_rxon_cmd); | 
|  | default: | 
|  | return len; | 
|  | } | 
|  | } | 
|  |  | 
|  | static u16 iwl4965_build_addsta_hcmd(const struct iwl_legacy_addsta_cmd *cmd, | 
|  | u8 *data) | 
|  | { | 
|  | struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data; | 
|  | addsta->mode = cmd->mode; | 
|  | memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); | 
|  | memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo)); | 
|  | addsta->station_flags = cmd->station_flags; | 
|  | addsta->station_flags_msk = cmd->station_flags_msk; | 
|  | addsta->tid_disable_tx = cmd->tid_disable_tx; | 
|  | addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; | 
|  | addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; | 
|  | addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; | 
|  | addsta->sleep_tx_count = cmd->sleep_tx_count; | 
|  | addsta->reserved1 = cpu_to_le16(0); | 
|  | addsta->reserved2 = cpu_to_le16(0); | 
|  |  | 
|  | return (u16)sizeof(struct iwl4965_addsta_cmd); | 
|  | } | 
|  |  | 
|  | static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp) | 
|  | { | 
|  | return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue | 
|  | */ | 
|  | static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, | 
|  | struct iwl_ht_agg *agg, | 
|  | struct iwl4965_tx_resp *tx_resp, | 
|  | int txq_id, u16 start_idx) | 
|  | { | 
|  | u16 status; | 
|  | struct agg_tx_status *frame_status = tx_resp->u.agg_status; | 
|  | struct ieee80211_tx_info *info = NULL; | 
|  | struct ieee80211_hdr *hdr = NULL; | 
|  | u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); | 
|  | int i, sh, idx; | 
|  | u16 seq; | 
|  | if (agg->wait_for_ba) | 
|  | IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n"); | 
|  |  | 
|  | agg->frame_count = tx_resp->frame_count; | 
|  | agg->start_idx = start_idx; | 
|  | agg->rate_n_flags = rate_n_flags; | 
|  | agg->bitmap = 0; | 
|  |  | 
|  | /* num frames attempted by Tx command */ | 
|  | if (agg->frame_count == 1) { | 
|  | /* Only one frame was attempted; no block-ack will arrive */ | 
|  | status = le16_to_cpu(frame_status[0].status); | 
|  | idx = start_idx; | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n", | 
|  | agg->frame_count, agg->start_idx, idx); | 
|  |  | 
|  | info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb); | 
|  | info->status.rates[0].count = tx_resp->failure_frame + 1; | 
|  | info->flags &= ~IEEE80211_TX_CTL_AMPDU; | 
|  | info->flags |= iwl4965_tx_status_to_mac80211(status); | 
|  | iwl4965_hwrate_to_tx_control(priv, rate_n_flags, info); | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n", | 
|  | status & 0xff, tx_resp->failure_frame); | 
|  | IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags); | 
|  |  | 
|  | agg->wait_for_ba = 0; | 
|  | } else { | 
|  | /* Two or more frames were attempted; expect block-ack */ | 
|  | u64 bitmap = 0; | 
|  | int start = agg->start_idx; | 
|  |  | 
|  | /* Construct bit-map of pending frames within Tx window */ | 
|  | for (i = 0; i < agg->frame_count; i++) { | 
|  | u16 sc; | 
|  | status = le16_to_cpu(frame_status[i].status); | 
|  | seq  = le16_to_cpu(frame_status[i].sequence); | 
|  | idx = SEQ_TO_INDEX(seq); | 
|  | txq_id = SEQ_TO_QUEUE(seq); | 
|  |  | 
|  | if (status & (AGG_TX_STATE_FEW_BYTES_MSK | | 
|  | AGG_TX_STATE_ABORT_MSK)) | 
|  | continue; | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n", | 
|  | agg->frame_count, txq_id, idx); | 
|  |  | 
|  | hdr = iwl_legacy_tx_queue_get_hdr(priv, txq_id, idx); | 
|  | if (!hdr) { | 
|  | IWL_ERR(priv, | 
|  | "BUG_ON idx doesn't point to valid skb" | 
|  | " idx=%d, txq_id=%d\n", idx, txq_id); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | sc = le16_to_cpu(hdr->seq_ctrl); | 
|  | if (idx != (SEQ_TO_SN(sc) & 0xff)) { | 
|  | IWL_ERR(priv, | 
|  | "BUG_ON idx doesn't match seq control" | 
|  | " idx=%d, seq_idx=%d, seq=%d\n", | 
|  | idx, SEQ_TO_SN(sc), hdr->seq_ctrl); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n", | 
|  | i, idx, SEQ_TO_SN(sc)); | 
|  |  | 
|  | sh = idx - start; | 
|  | if (sh > 64) { | 
|  | sh = (start - idx) + 0xff; | 
|  | bitmap = bitmap << sh; | 
|  | sh = 0; | 
|  | start = idx; | 
|  | } else if (sh < -64) | 
|  | sh  = 0xff - (start - idx); | 
|  | else if (sh < 0) { | 
|  | sh = start - idx; | 
|  | start = idx; | 
|  | bitmap = bitmap << sh; | 
|  | sh = 0; | 
|  | } | 
|  | bitmap |= 1ULL << sh; | 
|  | IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n", | 
|  | start, (unsigned long long)bitmap); | 
|  | } | 
|  |  | 
|  | agg->bitmap = bitmap; | 
|  | agg->start_idx = start; | 
|  | IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n", | 
|  | agg->frame_count, agg->start_idx, | 
|  | (unsigned long long)agg->bitmap); | 
|  |  | 
|  | if (bitmap) | 
|  | agg->wait_for_ba = 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u8 iwl4965_find_station(struct iwl_priv *priv, const u8 *addr) | 
|  | { | 
|  | int i; | 
|  | int start = 0; | 
|  | int ret = IWL_INVALID_STATION; | 
|  | unsigned long flags; | 
|  |  | 
|  | if ((priv->iw_mode == NL80211_IFTYPE_ADHOC)) | 
|  | start = IWL_STA_ID; | 
|  |  | 
|  | if (is_broadcast_ether_addr(addr)) | 
|  | return priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id; | 
|  |  | 
|  | spin_lock_irqsave(&priv->sta_lock, flags); | 
|  | for (i = start; i < priv->hw_params.max_stations; i++) | 
|  | if (priv->stations[i].used && | 
|  | (!compare_ether_addr(priv->stations[i].sta.sta.addr, | 
|  | addr))) { | 
|  | ret = i; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n", | 
|  | addr, priv->num_stations); | 
|  |  | 
|  | out: | 
|  | /* | 
|  | * It may be possible that more commands interacting with stations | 
|  | * arrive before we completed processing the adding of | 
|  | * station | 
|  | */ | 
|  | if (ret != IWL_INVALID_STATION && | 
|  | (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) || | 
|  | ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) && | 
|  | (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) { | 
|  | IWL_ERR(priv, "Requested station info for sta %d before ready.\n", | 
|  | ret); | 
|  | ret = IWL_INVALID_STATION; | 
|  | } | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwl4965_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) | 
|  | { | 
|  | if (priv->iw_mode == NL80211_IFTYPE_STATION) { | 
|  | return IWL_AP_ID; | 
|  | } else { | 
|  | u8 *da = ieee80211_get_DA(hdr); | 
|  | return iwl4965_find_station(priv, da); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response | 
|  | */ | 
|  | static void iwl4965_rx_reply_tx(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = rxb_addr(rxb); | 
|  | u16 sequence = le16_to_cpu(pkt->hdr.sequence); | 
|  | int txq_id = SEQ_TO_QUEUE(sequence); | 
|  | int index = SEQ_TO_INDEX(sequence); | 
|  | struct iwl_tx_queue *txq = &priv->txq[txq_id]; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_tx_info *info; | 
|  | struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; | 
|  | u32  status = le32_to_cpu(tx_resp->u.status); | 
|  | int uninitialized_var(tid); | 
|  | int sta_id; | 
|  | int freed; | 
|  | u8 *qc = NULL; | 
|  | unsigned long flags; | 
|  |  | 
|  | if ((index >= txq->q.n_bd) || (iwl_legacy_queue_used(&txq->q, index) == 0)) { | 
|  | IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d " | 
|  | "is out of range [0-%d] %d %d\n", txq_id, | 
|  | index, txq->q.n_bd, txq->q.write_ptr, | 
|  | txq->q.read_ptr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | txq->time_stamp = jiffies; | 
|  | info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb); | 
|  | memset(&info->status, 0, sizeof(info->status)); | 
|  |  | 
|  | hdr = iwl_legacy_tx_queue_get_hdr(priv, txq_id, index); | 
|  | if (ieee80211_is_data_qos(hdr->frame_control)) { | 
|  | qc = ieee80211_get_qos_ctl(hdr); | 
|  | tid = qc[0] & 0xf; | 
|  | } | 
|  |  | 
|  | sta_id = iwl4965_get_ra_sta_id(priv, hdr); | 
|  | if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) { | 
|  | IWL_ERR(priv, "Station not known\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&priv->sta_lock, flags); | 
|  | if (txq->sched_retry) { | 
|  | const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp); | 
|  | struct iwl_ht_agg *agg = NULL; | 
|  | WARN_ON(!qc); | 
|  |  | 
|  | agg = &priv->stations[sta_id].tid[tid].agg; | 
|  |  | 
|  | iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); | 
|  |  | 
|  | /* check if BAR is needed */ | 
|  | if ((tx_resp->frame_count == 1) && !iwl4965_is_tx_success(status)) | 
|  | info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; | 
|  |  | 
|  | if (txq->q.read_ptr != (scd_ssn & 0xff)) { | 
|  | index = iwl_legacy_queue_dec_wrap(scd_ssn & 0xff, | 
|  | txq->q.n_bd); | 
|  | IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn " | 
|  | "%d index %d\n", scd_ssn , index); | 
|  | freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); | 
|  | if (qc) | 
|  | iwl4965_free_tfds_in_queue(priv, sta_id, | 
|  | tid, freed); | 
|  |  | 
|  | if (priv->mac80211_registered && | 
|  | (iwl_legacy_queue_space(&txq->q) > txq->q.low_mark) | 
|  | && (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) | 
|  | iwl_legacy_wake_queue(priv, txq); | 
|  | } | 
|  | } else { | 
|  | info->status.rates[0].count = tx_resp->failure_frame + 1; | 
|  | info->flags |= iwl4965_tx_status_to_mac80211(status); | 
|  | iwl4965_hwrate_to_tx_control(priv, | 
|  | le32_to_cpu(tx_resp->rate_n_flags), | 
|  | info); | 
|  |  | 
|  | IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) " | 
|  | "rate_n_flags 0x%x retries %d\n", | 
|  | txq_id, | 
|  | iwl4965_get_tx_fail_reason(status), status, | 
|  | le32_to_cpu(tx_resp->rate_n_flags), | 
|  | tx_resp->failure_frame); | 
|  |  | 
|  | freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); | 
|  | if (qc && likely(sta_id != IWL_INVALID_STATION)) | 
|  | iwl4965_free_tfds_in_queue(priv, sta_id, tid, freed); | 
|  | else if (sta_id == IWL_INVALID_STATION) | 
|  | IWL_DEBUG_TX_REPLY(priv, "Station not known\n"); | 
|  |  | 
|  | if (priv->mac80211_registered && | 
|  | (iwl_legacy_queue_space(&txq->q) > txq->q.low_mark)) | 
|  | iwl_legacy_wake_queue(priv, txq); | 
|  | } | 
|  | if (qc && likely(sta_id != IWL_INVALID_STATION)) | 
|  | iwl4965_txq_check_empty(priv, sta_id, tid, txq_id); | 
|  |  | 
|  | iwl4965_check_abort_status(priv, tx_resp->frame_count, status); | 
|  |  | 
|  | spin_unlock_irqrestore(&priv->sta_lock, flags); | 
|  | } | 
|  |  | 
|  | static void iwl4965_rx_beacon_notif(struct iwl_priv *priv, | 
|  | struct iwl_rx_mem_buffer *rxb) | 
|  | { | 
|  | struct iwl_rx_packet *pkt = rxb_addr(rxb); | 
|  | struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw; | 
|  | u8 rate __maybe_unused = | 
|  | iwl4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); | 
|  |  | 
|  | IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d " | 
|  | "tsf:0x%.8x%.8x rate:%d\n", | 
|  | le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, | 
|  | beacon->beacon_notify_hdr.failure_frame, | 
|  | le32_to_cpu(beacon->ibss_mgr_status), | 
|  | le32_to_cpu(beacon->high_tsf), | 
|  | le32_to_cpu(beacon->low_tsf), rate); | 
|  |  | 
|  | priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); | 
|  | } | 
|  |  | 
|  | /* Set up 4965-specific Rx frame reply handlers */ | 
|  | static void iwl4965_rx_handler_setup(struct iwl_priv *priv) | 
|  | { | 
|  | /* Legacy Rx frames */ | 
|  | priv->rx_handlers[REPLY_RX] = iwl4965_rx_reply_rx; | 
|  | /* Tx response */ | 
|  | priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx; | 
|  | priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif; | 
|  | } | 
|  |  | 
|  | static struct iwl_hcmd_ops iwl4965_hcmd = { | 
|  | .rxon_assoc = iwl4965_send_rxon_assoc, | 
|  | .commit_rxon = iwl4965_commit_rxon, | 
|  | .set_rxon_chain = iwl4965_set_rxon_chain, | 
|  | }; | 
|  |  | 
|  | static void iwl4965_post_scan(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  |  | 
|  | /* | 
|  | * Since setting the RXON may have been deferred while | 
|  | * performing the scan, fire one off if needed | 
|  | */ | 
|  | if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) | 
|  | iwl_legacy_commit_rxon(priv, ctx); | 
|  | } | 
|  |  | 
|  | static void iwl4965_post_associate(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  | struct ieee80211_conf *conf = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!vif || !priv->is_open) | 
|  | return; | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | iwl_legacy_scan_cancel_timeout(priv, 200); | 
|  |  | 
|  | conf = iwl_legacy_ieee80211_get_hw_conf(priv->hw); | 
|  |  | 
|  | ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_legacy_commit_rxon(priv, ctx); | 
|  |  | 
|  | ret = iwl_legacy_send_rxon_timing(priv, ctx); | 
|  | if (ret) | 
|  | IWL_WARN(priv, "RXON timing - " | 
|  | "Attempting to continue.\n"); | 
|  |  | 
|  | ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  |  | 
|  | iwl_legacy_set_rxon_ht(priv, &priv->current_ht_config); | 
|  |  | 
|  | if (priv->cfg->ops->hcmd->set_rxon_chain) | 
|  | priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); | 
|  |  | 
|  | ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); | 
|  |  | 
|  | IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n", | 
|  | vif->bss_conf.aid, vif->bss_conf.beacon_int); | 
|  |  | 
|  | if (vif->bss_conf.use_short_preamble) | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  |  | 
|  | if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { | 
|  | if (vif->bss_conf.use_short_slot) | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  | } | 
|  |  | 
|  | iwl_legacy_commit_rxon(priv, ctx); | 
|  |  | 
|  | IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n", | 
|  | vif->bss_conf.aid, ctx->active.bssid_addr); | 
|  |  | 
|  | switch (vif->type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | iwl4965_send_beacon_cmd(priv); | 
|  | break; | 
|  | default: | 
|  | IWL_ERR(priv, "%s Should not be called in %d mode\n", | 
|  | __func__, vif->type); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* the chain noise calibration will enabled PM upon completion | 
|  | * If chain noise has already been run, then we need to enable | 
|  | * power management here */ | 
|  | if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) | 
|  | iwl_legacy_power_update_mode(priv, false); | 
|  |  | 
|  | /* Enable Rx differential gain and sensitivity calibrations */ | 
|  | iwl4965_chain_noise_reset(priv); | 
|  | priv->start_calib = 1; | 
|  | } | 
|  |  | 
|  | static void iwl4965_config_ap(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
|  | return; | 
|  |  | 
|  | /* The following should be done only at AP bring up */ | 
|  | if (!iwl_legacy_is_associated_ctx(ctx)) { | 
|  |  | 
|  | /* RXON - unassoc (to set timing command) */ | 
|  | ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | iwl_legacy_commit_rxon(priv, ctx); | 
|  |  | 
|  | /* RXON Timing */ | 
|  | ret = iwl_legacy_send_rxon_timing(priv, ctx); | 
|  | if (ret) | 
|  | IWL_WARN(priv, "RXON timing failed - " | 
|  | "Attempting to continue.\n"); | 
|  |  | 
|  | /* AP has all antennas */ | 
|  | priv->chain_noise_data.active_chains = | 
|  | priv->hw_params.valid_rx_ant; | 
|  | iwl_legacy_set_rxon_ht(priv, &priv->current_ht_config); | 
|  | if (priv->cfg->ops->hcmd->set_rxon_chain) | 
|  | priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); | 
|  |  | 
|  | ctx->staging.assoc_id = 0; | 
|  |  | 
|  | if (vif->bss_conf.use_short_preamble) | 
|  | ctx->staging.flags |= | 
|  | RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | ctx->staging.flags &= | 
|  | ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  |  | 
|  | if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) { | 
|  | if (vif->bss_conf.use_short_slot) | 
|  | ctx->staging.flags |= | 
|  | RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | ctx->staging.flags &= | 
|  | ~RXON_FLG_SHORT_SLOT_MSK; | 
|  | } | 
|  | /* need to send beacon cmd before committing assoc RXON! */ | 
|  | iwl4965_send_beacon_cmd(priv); | 
|  | /* restore RXON assoc */ | 
|  | ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | iwl_legacy_commit_rxon(priv, ctx); | 
|  | } | 
|  | iwl4965_send_beacon_cmd(priv); | 
|  | } | 
|  |  | 
|  | static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { | 
|  | .get_hcmd_size = iwl4965_get_hcmd_size, | 
|  | .build_addsta_hcmd = iwl4965_build_addsta_hcmd, | 
|  | .request_scan = iwl4965_request_scan, | 
|  | .post_scan = iwl4965_post_scan, | 
|  | }; | 
|  |  | 
|  | static struct iwl_lib_ops iwl4965_lib = { | 
|  | .set_hw_params = iwl4965_hw_set_hw_params, | 
|  | .txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl, | 
|  | .txq_attach_buf_to_tfd = iwl4965_hw_txq_attach_buf_to_tfd, | 
|  | .txq_free_tfd = iwl4965_hw_txq_free_tfd, | 
|  | .txq_init = iwl4965_hw_tx_queue_init, | 
|  | .rx_handler_setup = iwl4965_rx_handler_setup, | 
|  | .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, | 
|  | .init_alive_start = iwl4965_init_alive_start, | 
|  | .load_ucode = iwl4965_load_bsm, | 
|  | .dump_nic_event_log = iwl4965_dump_nic_event_log, | 
|  | .dump_nic_error_log = iwl4965_dump_nic_error_log, | 
|  | .dump_fh = iwl4965_dump_fh, | 
|  | .set_channel_switch = iwl4965_hw_channel_switch, | 
|  | .apm_ops = { | 
|  | .init = iwl_legacy_apm_init, | 
|  | .config = iwl4965_nic_config, | 
|  | }, | 
|  | .eeprom_ops = { | 
|  | .regulatory_bands = { | 
|  | EEPROM_REGULATORY_BAND_1_CHANNELS, | 
|  | EEPROM_REGULATORY_BAND_2_CHANNELS, | 
|  | EEPROM_REGULATORY_BAND_3_CHANNELS, | 
|  | EEPROM_REGULATORY_BAND_4_CHANNELS, | 
|  | EEPROM_REGULATORY_BAND_5_CHANNELS, | 
|  | EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS, | 
|  | EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS | 
|  | }, | 
|  | .acquire_semaphore = iwl4965_eeprom_acquire_semaphore, | 
|  | .release_semaphore = iwl4965_eeprom_release_semaphore, | 
|  | }, | 
|  | .send_tx_power	= iwl4965_send_tx_power, | 
|  | .update_chain_flags = iwl4965_update_chain_flags, | 
|  | .temp_ops = { | 
|  | .temperature = iwl4965_temperature_calib, | 
|  | }, | 
|  | .debugfs_ops = { | 
|  | .rx_stats_read = iwl4965_ucode_rx_stats_read, | 
|  | .tx_stats_read = iwl4965_ucode_tx_stats_read, | 
|  | .general_stats_read = iwl4965_ucode_general_stats_read, | 
|  | }, | 
|  | .check_plcp_health = iwl4965_good_plcp_health, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_legacy_ops iwl4965_legacy_ops = { | 
|  | .post_associate = iwl4965_post_associate, | 
|  | .config_ap = iwl4965_config_ap, | 
|  | .manage_ibss_station = iwl4965_manage_ibss_station, | 
|  | .update_bcast_stations = iwl4965_update_bcast_stations, | 
|  | }; | 
|  |  | 
|  | struct ieee80211_ops iwl4965_hw_ops = { | 
|  | .tx = iwl4965_mac_tx, | 
|  | .start = iwl4965_mac_start, | 
|  | .stop = iwl4965_mac_stop, | 
|  | .add_interface = iwl_legacy_mac_add_interface, | 
|  | .remove_interface = iwl_legacy_mac_remove_interface, | 
|  | .change_interface = iwl_legacy_mac_change_interface, | 
|  | .config = iwl_legacy_mac_config, | 
|  | .configure_filter = iwl4965_configure_filter, | 
|  | .set_key = iwl4965_mac_set_key, | 
|  | .update_tkip_key = iwl4965_mac_update_tkip_key, | 
|  | .conf_tx = iwl_legacy_mac_conf_tx, | 
|  | .reset_tsf = iwl_legacy_mac_reset_tsf, | 
|  | .bss_info_changed = iwl_legacy_mac_bss_info_changed, | 
|  | .ampdu_action = iwl4965_mac_ampdu_action, | 
|  | .hw_scan = iwl_legacy_mac_hw_scan, | 
|  | .sta_add = iwl4965_mac_sta_add, | 
|  | .sta_remove = iwl_legacy_mac_sta_remove, | 
|  | .channel_switch = iwl4965_mac_channel_switch, | 
|  | .tx_last_beacon = iwl_legacy_mac_tx_last_beacon, | 
|  | }; | 
|  |  | 
|  | static const struct iwl_ops iwl4965_ops = { | 
|  | .lib = &iwl4965_lib, | 
|  | .hcmd = &iwl4965_hcmd, | 
|  | .utils = &iwl4965_hcmd_utils, | 
|  | .led = &iwl4965_led_ops, | 
|  | .legacy = &iwl4965_legacy_ops, | 
|  | .ieee80211_ops = &iwl4965_hw_ops, | 
|  | }; | 
|  |  | 
|  | static struct iwl_base_params iwl4965_base_params = { | 
|  | .eeprom_size = IWL4965_EEPROM_IMG_SIZE, | 
|  | .num_of_queues = IWL49_NUM_QUEUES, | 
|  | .num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES, | 
|  | .pll_cfg_val = 0, | 
|  | .set_l0s = true, | 
|  | .use_bsm = true, | 
|  | .led_compensation = 61, | 
|  | .chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS, | 
|  | .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, | 
|  | .wd_timeout = IWL_DEF_WD_TIMEOUT, | 
|  | .temperature_kelvin = true, | 
|  | .max_event_log_size = 512, | 
|  | .ucode_tracing = true, | 
|  | .sensitivity_calib_by_driver = true, | 
|  | .chain_noise_calib_by_driver = true, | 
|  | }; | 
|  |  | 
|  | struct iwl_cfg iwl4965_cfg = { | 
|  | .name = "Intel(R) Wireless WiFi Link 4965AGN", | 
|  | .fw_name_pre = IWL4965_FW_PRE, | 
|  | .ucode_api_max = IWL4965_UCODE_API_MAX, | 
|  | .ucode_api_min = IWL4965_UCODE_API_MIN, | 
|  | .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, | 
|  | .valid_tx_ant = ANT_AB, | 
|  | .valid_rx_ant = ANT_ABC, | 
|  | .eeprom_ver = EEPROM_4965_EEPROM_VERSION, | 
|  | .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION, | 
|  | .ops = &iwl4965_ops, | 
|  | .mod_params = &iwl4965_mod_params, | 
|  | .base_params = &iwl4965_base_params, | 
|  | .led_mode = IWL_LED_BLINK, | 
|  | /* | 
|  | * Force use of chains B and C for scan RX on 5 GHz band | 
|  | * because the device has off-channel reception on chain A. | 
|  | */ | 
|  | .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC, | 
|  | }; | 
|  |  | 
|  | /* Module firmware */ | 
|  | MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX)); |