| Paul Mundt | 4466b20 | 2008-12-12 16:34:44 +0900 | [diff] [blame] | 1 | /* Cloned and hacked for uClibc by Paul Mundt, December 2003 */ | 
 | 2 | /* Modified by SuperH, Inc. September 2003 */ | 
 | 3 | ! | 
 | 4 | ! Fast SH memcpy | 
 | 5 | ! | 
 | 6 | ! by Toshiyasu Morita (tm@netcom.com) | 
 | 7 | ! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut) | 
 | 8 | ! SH5 code Copyright 2002 SuperH Ltd. | 
 | 9 | ! | 
 | 10 | ! Entry: ARG0: destination pointer | 
 | 11 | !        ARG1: source pointer | 
 | 12 | !        ARG2: byte count | 
 | 13 | ! | 
 | 14 | ! Exit:  RESULT: destination pointer | 
 | 15 | !        any other registers in the range r0-r7: trashed | 
 | 16 | ! | 
 | 17 | ! Notes: Usually one wants to do small reads and write a longword, but | 
 | 18 | !        unfortunately it is difficult in some cases to concatanate bytes | 
 | 19 | !        into a longword on the SH, so this does a longword read and small | 
 | 20 | !        writes. | 
 | 21 | ! | 
 | 22 | ! This implementation makes two assumptions about how it is called: | 
 | 23 | ! | 
 | 24 | ! 1.: If the byte count is nonzero, the address of the last byte to be | 
 | 25 | !     copied is unsigned greater than the address of the first byte to | 
 | 26 | !     be copied.  This could be easily swapped for a signed comparison, | 
 | 27 | !     but the algorithm used needs some comparison. | 
 | 28 | ! | 
 | 29 | ! 2.: When there are two or three bytes in the last word of an 11-or-more | 
 | 30 | !     bytes memory chunk to b copied, the rest of the word can be read | 
 | 31 | !     without side effects. | 
 | 32 | !     This could be easily changed by increasing the minumum size of | 
 | 33 | !     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, | 
 | 34 | !     however, this would cost a few extra cyles on average. | 
 | 35 | !     For SHmedia, the assumption is that any quadword can be read in its | 
 | 36 | !     enirety if at least one byte is included in the copy. | 
 | 37 | ! | 
 | 38 |  | 
 | 39 | 	.section .text..SHmedia32,"ax" | 
 | 40 | 	.globl	memcpy | 
 | 41 | 	.type	memcpy, @function | 
 | 42 | 	.align	5 | 
 | 43 |  | 
 | 44 | memcpy: | 
 | 45 |  | 
 | 46 | #define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1 | 
 | 47 | #define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1 | 
 | 48 | #define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1 | 
 | 49 | #define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1 | 
 | 50 |  | 
 | 51 | 	ld.b r3,0,r63 | 
 | 52 | 	pta/l Large,tr0 | 
 | 53 | 	movi 25,r0 | 
 | 54 | 	bgeu/u r4,r0,tr0 | 
 | 55 | 	nsb r4,r0 | 
 | 56 | 	shlli r0,5,r0 | 
 | 57 | 	movi (L1-L0+63*32 + 1) & 0xffff,r1 | 
 | 58 | 	sub r1, r0, r0 | 
 | 59 | L0:	ptrel r0,tr0 | 
 | 60 | 	add r2,r4,r5 | 
 | 61 | 	ptabs r18,tr1 | 
 | 62 | 	add r3,r4,r6 | 
 | 63 | 	blink tr0,r63 | 
 | 64 | 	 | 
 | 65 | /* Rearranged to make cut2 safe */ | 
 | 66 | 	.balign 8 | 
 | 67 | L4_7:	/* 4..7 byte memcpy cntd. */ | 
 | 68 | 	stlo.l r2, 0, r0 | 
 | 69 | 	or r6, r7, r6 | 
 | 70 | 	sthi.l r5, -1, r6 | 
 | 71 | 	stlo.l r5, -4, r6 | 
 | 72 | 	blink tr1,r63 | 
 | 73 |  | 
 | 74 | 	.balign 8 | 
 | 75 | L1:	/* 0 byte memcpy */ | 
 | 76 | 	nop | 
 | 77 | 	blink tr1,r63 | 
 | 78 | 	nop | 
 | 79 | 	nop | 
 | 80 | 	nop | 
 | 81 | 	nop | 
 | 82 |  | 
 | 83 | L2_3:	/* 2 or 3 byte memcpy cntd. */ | 
 | 84 | 	st.b r5,-1,r6 | 
 | 85 | 	blink tr1,r63 | 
 | 86 |  | 
 | 87 | 	/* 1 byte memcpy */ | 
 | 88 | 	ld.b r3,0,r0 | 
 | 89 | 	st.b r2,0,r0 | 
 | 90 | 	blink tr1,r63 | 
 | 91 |  | 
 | 92 | L8_15:	/* 8..15 byte memcpy cntd. */ | 
 | 93 | 	stlo.q r2, 0, r0 | 
 | 94 | 	or r6, r7, r6 | 
 | 95 | 	sthi.q r5, -1, r6 | 
 | 96 | 	stlo.q r5, -8, r6 | 
 | 97 | 	blink tr1,r63 | 
 | 98 | 	 | 
 | 99 | 	/* 2 or 3 byte memcpy */ | 
 | 100 | 	ld.b r3,0,r0 | 
 | 101 | 	ld.b r2,0,r63 | 
 | 102 | 	ld.b r3,1,r1 | 
 | 103 | 	st.b r2,0,r0 | 
 | 104 | 	pta/l L2_3,tr0 | 
 | 105 | 	ld.b r6,-1,r6 | 
 | 106 | 	st.b r2,1,r1 | 
 | 107 | 	blink tr0, r63 | 
 | 108 |  | 
 | 109 | 	/* 4 .. 7 byte memcpy */ | 
 | 110 | 	LDUAL (r3, 0, r0, r1) | 
 | 111 | 	pta L4_7, tr0 | 
 | 112 | 	ldlo.l r6, -4, r7 | 
 | 113 | 	or r0, r1, r0 | 
 | 114 | 	sthi.l r2, 3, r0 | 
 | 115 | 	ldhi.l r6, -1, r6 | 
 | 116 | 	blink tr0, r63 | 
 | 117 |  | 
 | 118 | 	/* 8 .. 15 byte memcpy */ | 
 | 119 | 	LDUAQ (r3, 0, r0, r1) | 
 | 120 | 	pta L8_15, tr0 | 
 | 121 | 	ldlo.q r6, -8, r7 | 
 | 122 | 	or r0, r1, r0 | 
 | 123 | 	sthi.q r2, 7, r0 | 
 | 124 | 	ldhi.q r6, -1, r6 | 
 | 125 | 	blink tr0, r63 | 
 | 126 |  | 
 | 127 | 	/* 16 .. 24 byte memcpy */ | 
 | 128 | 	LDUAQ (r3, 0, r0, r1) | 
 | 129 | 	LDUAQ (r3, 8, r8, r9) | 
 | 130 | 	or r0, r1, r0 | 
 | 131 | 	sthi.q r2, 7, r0 | 
 | 132 | 	or r8, r9, r8 | 
 | 133 | 	sthi.q r2, 15, r8 | 
 | 134 | 	ldlo.q r6, -8, r7 | 
 | 135 | 	ldhi.q r6, -1, r6 | 
 | 136 | 	stlo.q r2, 8, r8 | 
 | 137 | 	stlo.q r2, 0, r0 | 
 | 138 | 	or r6, r7, r6 | 
 | 139 | 	sthi.q r5, -1, r6 | 
 | 140 | 	stlo.q r5, -8, r6 | 
 | 141 | 	blink tr1,r63 | 
 | 142 |  | 
 | 143 | Large: | 
 | 144 | 	ld.b r2, 0, r63 | 
 | 145 | 	pta/l  Loop_ua, tr1 | 
 | 146 | 	ori r3, -8, r7 | 
 | 147 | 	sub r2, r7, r22 | 
 | 148 | 	sub r3, r2, r6 | 
 | 149 | 	add r2, r4, r5 | 
 | 150 | 	ldlo.q r3, 0, r0 | 
 | 151 | 	addi r5, -16, r5 | 
 | 152 | 	movi 64+8, r27 // could subtract r7 from that. | 
 | 153 | 	stlo.q r2, 0, r0 | 
 | 154 | 	sthi.q r2, 7, r0 | 
 | 155 | 	ldx.q r22, r6, r0 | 
 | 156 | 	bgtu/l r27, r4, tr1 | 
 | 157 |  | 
 | 158 | 	addi r5, -48, r27 | 
 | 159 | 	pta/l Loop_line, tr0 | 
 | 160 | 	addi r6, 64, r36 | 
 | 161 | 	addi r6, -24, r19 | 
 | 162 | 	addi r6, -16, r20 | 
 | 163 | 	addi r6, -8, r21 | 
 | 164 |  | 
 | 165 | Loop_line: | 
 | 166 | 	ldx.q r22, r36, r63 | 
 | 167 | 	alloco r22, 32 | 
 | 168 | 	addi r22, 32, r22 | 
 | 169 | 	ldx.q r22, r19, r23 | 
 | 170 | 	sthi.q r22, -25, r0 | 
 | 171 | 	ldx.q r22, r20, r24 | 
 | 172 | 	ldx.q r22, r21, r25 | 
 | 173 | 	stlo.q r22, -32, r0 | 
 | 174 | 	ldx.q r22, r6,  r0 | 
 | 175 | 	sthi.q r22, -17, r23 | 
 | 176 | 	sthi.q r22,  -9, r24 | 
 | 177 | 	sthi.q r22,  -1, r25 | 
 | 178 | 	stlo.q r22, -24, r23 | 
 | 179 | 	stlo.q r22, -16, r24 | 
 | 180 | 	stlo.q r22,  -8, r25 | 
 | 181 | 	bgeu r27, r22, tr0 | 
 | 182 |  | 
 | 183 | Loop_ua: | 
 | 184 | 	addi r22, 8, r22 | 
 | 185 | 	sthi.q r22, -1, r0 | 
 | 186 | 	stlo.q r22, -8, r0 | 
 | 187 | 	ldx.q r22, r6, r0 | 
 | 188 | 	bgtu/l r5, r22, tr1 | 
 | 189 |  | 
 | 190 | 	add r3, r4, r7 | 
 | 191 | 	ldlo.q r7, -8, r1 | 
 | 192 | 	sthi.q r22, 7, r0 | 
 | 193 | 	ldhi.q r7, -1, r7 | 
 | 194 | 	ptabs r18,tr1 | 
 | 195 | 	stlo.q r22, 0, r0 | 
 | 196 | 	or r1, r7, r1 | 
 | 197 | 	sthi.q r5, 15, r1 | 
 | 198 | 	stlo.q r5, 8, r1 | 
 | 199 | 	blink tr1, r63 | 
 | 200 |  | 
 | 201 | 	.size memcpy,.-memcpy |