| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1 | /* | 
|  | 2 | * Fusb300 UDC (USB gadget) | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2010 Faraday Technology Corp. | 
|  | 5 | * | 
|  | 6 | * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> | 
|  | 7 | * | 
|  | 8 | * This program is free software; you can redistribute it and/or modify | 
|  | 9 | * it under the terms of the GNU General Public License as published by | 
|  | 10 | * the Free Software Foundation; version 2 of the License. | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 11 | */ | 
|  | 12 | #include <linux/dma-mapping.h> | 
|  | 13 | #include <linux/err.h> | 
|  | 14 | #include <linux/interrupt.h> | 
|  | 15 | #include <linux/io.h> | 
| Paul Gortmaker | 6eb0de8 | 2011-07-03 16:09:31 -0400 | [diff] [blame] | 16 | #include <linux/module.h> | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 17 | #include <linux/platform_device.h> | 
|  | 18 | #include <linux/usb/ch9.h> | 
|  | 19 | #include <linux/usb/gadget.h> | 
|  | 20 |  | 
|  | 21 | #include "fusb300_udc.h" | 
|  | 22 |  | 
|  | 23 | MODULE_DESCRIPTION("FUSB300  USB gadget driver"); | 
|  | 24 | MODULE_LICENSE("GPL"); | 
|  | 25 | MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>"); | 
|  | 26 | MODULE_ALIAS("platform:fusb300_udc"); | 
|  | 27 |  | 
|  | 28 | #define DRIVER_VERSION	"20 October 2010" | 
|  | 29 |  | 
|  | 30 | static const char udc_name[] = "fusb300_udc"; | 
|  | 31 | static const char * const fusb300_ep_name[] = { | 
| Dan Carpenter | 6b2e30c | 2011-02-07 20:01:36 +0300 | [diff] [blame] | 32 | "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9", | 
|  | 33 | "ep10", "ep11", "ep12", "ep13", "ep14", "ep15" | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 34 | }; | 
|  | 35 |  | 
|  | 36 | static void done(struct fusb300_ep *ep, struct fusb300_request *req, | 
|  | 37 | int status); | 
|  | 38 |  | 
|  | 39 | static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset, | 
|  | 40 | u32 value) | 
|  | 41 | { | 
|  | 42 | u32 reg = ioread32(fusb300->reg + offset); | 
|  | 43 |  | 
|  | 44 | reg |= value; | 
|  | 45 | iowrite32(reg, fusb300->reg + offset); | 
|  | 46 | } | 
|  | 47 |  | 
|  | 48 | static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset, | 
|  | 49 | u32 value) | 
|  | 50 | { | 
|  | 51 | u32 reg = ioread32(fusb300->reg + offset); | 
|  | 52 |  | 
|  | 53 | reg &= ~value; | 
|  | 54 | iowrite32(reg, fusb300->reg + offset); | 
|  | 55 | } | 
|  | 56 |  | 
|  | 57 |  | 
|  | 58 | static void fusb300_ep_setting(struct fusb300_ep *ep, | 
|  | 59 | struct fusb300_ep_info info) | 
|  | 60 | { | 
|  | 61 | ep->epnum = info.epnum; | 
|  | 62 | ep->type = info.type; | 
|  | 63 | } | 
|  | 64 |  | 
|  | 65 | static int fusb300_ep_release(struct fusb300_ep *ep) | 
|  | 66 | { | 
|  | 67 | if (!ep->epnum) | 
|  | 68 | return 0; | 
|  | 69 | ep->epnum = 0; | 
|  | 70 | ep->stall = 0; | 
|  | 71 | ep->wedged = 0; | 
|  | 72 | return 0; | 
|  | 73 | } | 
|  | 74 |  | 
|  | 75 | static void fusb300_set_fifo_entry(struct fusb300 *fusb300, | 
|  | 76 | u32 ep) | 
|  | 77 | { | 
|  | 78 | u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
|  | 79 |  | 
|  | 80 | val &= ~FUSB300_EPSET1_FIFOENTRY_MSK; | 
|  | 81 | val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM); | 
|  | 82 | iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
|  | 83 | } | 
|  | 84 |  | 
|  | 85 | static void fusb300_set_start_entry(struct fusb300 *fusb300, | 
|  | 86 | u8 ep) | 
|  | 87 | { | 
|  | 88 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
|  | 89 | u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM; | 
|  | 90 |  | 
|  | 91 | reg &= ~FUSB300_EPSET1_START_ENTRY_MSK	; | 
|  | 92 | reg |= FUSB300_EPSET1_START_ENTRY(start_entry); | 
|  | 93 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
|  | 94 | if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) { | 
|  | 95 | fusb300->fifo_entry_num = 0; | 
|  | 96 | fusb300->addrofs = 0; | 
|  | 97 | pr_err("fifo entry is over the maximum number!\n"); | 
|  | 98 | } else | 
|  | 99 | fusb300->fifo_entry_num++; | 
|  | 100 | } | 
|  | 101 |  | 
|  | 102 | /* set fusb300_set_start_entry first before fusb300_set_epaddrofs */ | 
|  | 103 | static void fusb300_set_epaddrofs(struct fusb300 *fusb300, | 
|  | 104 | struct fusb300_ep_info info) | 
|  | 105 | { | 
|  | 106 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
|  | 107 |  | 
|  | 108 | reg &= ~FUSB300_EPSET2_ADDROFS_MSK; | 
|  | 109 | reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs); | 
|  | 110 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
|  | 111 | fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM; | 
|  | 112 | } | 
|  | 113 |  | 
|  | 114 | static void ep_fifo_setting(struct fusb300 *fusb300, | 
|  | 115 | struct fusb300_ep_info info) | 
|  | 116 | { | 
|  | 117 | fusb300_set_fifo_entry(fusb300, info.epnum); | 
|  | 118 | fusb300_set_start_entry(fusb300, info.epnum); | 
|  | 119 | fusb300_set_epaddrofs(fusb300, info); | 
|  | 120 | } | 
|  | 121 |  | 
|  | 122 | static void fusb300_set_eptype(struct fusb300 *fusb300, | 
|  | 123 | struct fusb300_ep_info info) | 
|  | 124 | { | 
|  | 125 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 126 |  | 
|  | 127 | reg &= ~FUSB300_EPSET1_TYPE_MSK; | 
|  | 128 | reg |= FUSB300_EPSET1_TYPE(info.type); | 
|  | 129 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 130 | } | 
|  | 131 |  | 
|  | 132 | static void fusb300_set_epdir(struct fusb300 *fusb300, | 
|  | 133 | struct fusb300_ep_info info) | 
|  | 134 | { | 
|  | 135 | u32 reg; | 
|  | 136 |  | 
|  | 137 | if (!info.dir_in) | 
|  | 138 | return; | 
|  | 139 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 140 | reg &= ~FUSB300_EPSET1_DIR_MSK; | 
|  | 141 | reg |= FUSB300_EPSET1_DIRIN; | 
|  | 142 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 143 | } | 
|  | 144 |  | 
|  | 145 | static void fusb300_set_ep_active(struct fusb300 *fusb300, | 
|  | 146 | u8 ep) | 
|  | 147 | { | 
|  | 148 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
|  | 149 |  | 
|  | 150 | reg |= FUSB300_EPSET1_ACTEN; | 
|  | 151 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); | 
|  | 152 | } | 
|  | 153 |  | 
|  | 154 | static void fusb300_set_epmps(struct fusb300 *fusb300, | 
|  | 155 | struct fusb300_ep_info info) | 
|  | 156 | { | 
|  | 157 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
|  | 158 |  | 
|  | 159 | reg &= ~FUSB300_EPSET2_MPS_MSK; | 
|  | 160 | reg |= FUSB300_EPSET2_MPS(info.maxpacket); | 
|  | 161 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); | 
|  | 162 | } | 
|  | 163 |  | 
|  | 164 | static void fusb300_set_interval(struct fusb300 *fusb300, | 
|  | 165 | struct fusb300_ep_info info) | 
|  | 166 | { | 
|  | 167 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 168 |  | 
|  | 169 | reg &= ~FUSB300_EPSET1_INTERVAL(0x7); | 
|  | 170 | reg |= FUSB300_EPSET1_INTERVAL(info.interval); | 
|  | 171 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 172 | } | 
|  | 173 |  | 
|  | 174 | static void fusb300_set_bwnum(struct fusb300 *fusb300, | 
|  | 175 | struct fusb300_ep_info info) | 
|  | 176 | { | 
|  | 177 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 178 |  | 
|  | 179 | reg &= ~FUSB300_EPSET1_BWNUM(0x3); | 
|  | 180 | reg |= FUSB300_EPSET1_BWNUM(info.bw_num); | 
|  | 181 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | static void set_ep_reg(struct fusb300 *fusb300, | 
|  | 185 | struct fusb300_ep_info info) | 
|  | 186 | { | 
|  | 187 | fusb300_set_eptype(fusb300, info); | 
|  | 188 | fusb300_set_epdir(fusb300, info); | 
|  | 189 | fusb300_set_epmps(fusb300, info); | 
|  | 190 |  | 
|  | 191 | if (info.interval) | 
|  | 192 | fusb300_set_interval(fusb300, info); | 
|  | 193 |  | 
|  | 194 | if (info.bw_num) | 
|  | 195 | fusb300_set_bwnum(fusb300, info); | 
|  | 196 |  | 
|  | 197 | fusb300_set_ep_active(fusb300, info.epnum); | 
|  | 198 | } | 
|  | 199 |  | 
|  | 200 | static int config_ep(struct fusb300_ep *ep, | 
|  | 201 | const struct usb_endpoint_descriptor *desc) | 
|  | 202 | { | 
|  | 203 | struct fusb300 *fusb300 = ep->fusb300; | 
|  | 204 | struct fusb300_ep_info info; | 
|  | 205 |  | 
|  | 206 | ep->desc = desc; | 
|  | 207 |  | 
|  | 208 | info.interval = 0; | 
|  | 209 | info.addrofs = 0; | 
|  | 210 | info.bw_num = 0; | 
|  | 211 |  | 
|  | 212 | info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; | 
|  | 213 | info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; | 
| Kuninori Morimoto | 29cc889 | 2011-08-23 03:12:03 -0700 | [diff] [blame] | 214 | info.maxpacket = usb_endpoint_maxp(desc); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 215 | info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; | 
|  | 216 |  | 
|  | 217 | if ((info.type == USB_ENDPOINT_XFER_INT) || | 
|  | 218 | (info.type == USB_ENDPOINT_XFER_ISOC)) { | 
|  | 219 | info.interval = desc->bInterval; | 
|  | 220 | if (info.type == USB_ENDPOINT_XFER_ISOC) | 
|  | 221 | info.bw_num = ((desc->wMaxPacketSize & 0x1800) >> 11); | 
|  | 222 | } | 
|  | 223 |  | 
|  | 224 | ep_fifo_setting(fusb300, info); | 
|  | 225 |  | 
|  | 226 | set_ep_reg(fusb300, info); | 
|  | 227 |  | 
|  | 228 | fusb300_ep_setting(ep, info); | 
|  | 229 |  | 
|  | 230 | fusb300->ep[info.epnum] = ep; | 
|  | 231 |  | 
|  | 232 | return 0; | 
|  | 233 | } | 
|  | 234 |  | 
|  | 235 | static int fusb300_enable(struct usb_ep *_ep, | 
|  | 236 | const struct usb_endpoint_descriptor *desc) | 
|  | 237 | { | 
|  | 238 | struct fusb300_ep *ep; | 
|  | 239 |  | 
|  | 240 | ep = container_of(_ep, struct fusb300_ep, ep); | 
|  | 241 |  | 
|  | 242 | if (ep->fusb300->reenum) { | 
|  | 243 | ep->fusb300->fifo_entry_num = 0; | 
|  | 244 | ep->fusb300->addrofs = 0; | 
|  | 245 | ep->fusb300->reenum = 0; | 
|  | 246 | } | 
|  | 247 |  | 
|  | 248 | return config_ep(ep, desc); | 
|  | 249 | } | 
|  | 250 |  | 
|  | 251 | static int fusb300_disable(struct usb_ep *_ep) | 
|  | 252 | { | 
|  | 253 | struct fusb300_ep *ep; | 
|  | 254 | struct fusb300_request *req; | 
|  | 255 | unsigned long flags; | 
|  | 256 |  | 
|  | 257 | ep = container_of(_ep, struct fusb300_ep, ep); | 
|  | 258 |  | 
|  | 259 | BUG_ON(!ep); | 
|  | 260 |  | 
|  | 261 | while (!list_empty(&ep->queue)) { | 
|  | 262 | req = list_entry(ep->queue.next, struct fusb300_request, queue); | 
|  | 263 | spin_lock_irqsave(&ep->fusb300->lock, flags); | 
|  | 264 | done(ep, req, -ECONNRESET); | 
|  | 265 | spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
|  | 266 | } | 
|  | 267 |  | 
|  | 268 | return fusb300_ep_release(ep); | 
|  | 269 | } | 
|  | 270 |  | 
|  | 271 | static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep, | 
|  | 272 | gfp_t gfp_flags) | 
|  | 273 | { | 
|  | 274 | struct fusb300_request *req; | 
|  | 275 |  | 
|  | 276 | req = kzalloc(sizeof(struct fusb300_request), gfp_flags); | 
|  | 277 | if (!req) | 
|  | 278 | return NULL; | 
|  | 279 | INIT_LIST_HEAD(&req->queue); | 
|  | 280 |  | 
|  | 281 | return &req->req; | 
|  | 282 | } | 
|  | 283 |  | 
|  | 284 | static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req) | 
|  | 285 | { | 
|  | 286 | struct fusb300_request *req; | 
|  | 287 |  | 
|  | 288 | req = container_of(_req, struct fusb300_request, req); | 
|  | 289 | kfree(req); | 
|  | 290 | } | 
|  | 291 |  | 
|  | 292 | static int enable_fifo_int(struct fusb300_ep *ep) | 
|  | 293 | { | 
|  | 294 | struct fusb300 *fusb300 = ep->fusb300; | 
|  | 295 |  | 
|  | 296 | if (ep->epnum) { | 
|  | 297 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0, | 
|  | 298 | FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); | 
|  | 299 | } else { | 
|  | 300 | pr_err("can't enable_fifo_int ep0\n"); | 
|  | 301 | return -EINVAL; | 
|  | 302 | } | 
|  | 303 |  | 
|  | 304 | return 0; | 
|  | 305 | } | 
|  | 306 |  | 
|  | 307 | static int disable_fifo_int(struct fusb300_ep *ep) | 
|  | 308 | { | 
|  | 309 | struct fusb300 *fusb300 = ep->fusb300; | 
|  | 310 |  | 
|  | 311 | if (ep->epnum) { | 
|  | 312 | fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0, | 
|  | 313 | FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); | 
|  | 314 | } else { | 
|  | 315 | pr_err("can't disable_fifo_int ep0\n"); | 
|  | 316 | return -EINVAL; | 
|  | 317 | } | 
|  | 318 |  | 
|  | 319 | return 0; | 
|  | 320 | } | 
|  | 321 |  | 
|  | 322 | static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length) | 
|  | 323 | { | 
|  | 324 | u32 reg; | 
|  | 325 |  | 
|  | 326 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); | 
|  | 327 | reg &= ~FUSB300_CSR_LEN_MSK; | 
|  | 328 | reg |= FUSB300_CSR_LEN(length); | 
|  | 329 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR); | 
|  | 330 | } | 
|  | 331 |  | 
|  | 332 | /* write data to cx fifo */ | 
|  | 333 | static void fusb300_wrcxf(struct fusb300_ep *ep, | 
|  | 334 | struct fusb300_request *req) | 
|  | 335 | { | 
|  | 336 | int i = 0; | 
|  | 337 | u8 *tmp; | 
|  | 338 | u32 data; | 
|  | 339 | struct fusb300 *fusb300 = ep->fusb300; | 
|  | 340 | u32 length = req->req.length - req->req.actual; | 
|  | 341 |  | 
|  | 342 | tmp = req->req.buf + req->req.actual; | 
|  | 343 |  | 
|  | 344 | if (length > SS_CTL_MAX_PACKET_SIZE) { | 
|  | 345 | fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE); | 
|  | 346 | for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) { | 
|  | 347 | data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | | 
|  | 348 | *(tmp + 3) << 24; | 
|  | 349 | iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 350 | tmp += 4; | 
|  | 351 | } | 
|  | 352 | req->req.actual += SS_CTL_MAX_PACKET_SIZE; | 
|  | 353 | } else { /* length is less than max packet size */ | 
|  | 354 | fusb300_set_cxlen(fusb300, length); | 
|  | 355 | for (i = length >> 2; i > 0; i--) { | 
|  | 356 | data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | | 
|  | 357 | *(tmp + 3) << 24; | 
|  | 358 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 359 | iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 360 | tmp = tmp + 4; | 
|  | 361 | } | 
|  | 362 | switch (length % 4) { | 
|  | 363 | case 1: | 
|  | 364 | data = *tmp; | 
|  | 365 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 366 | iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 367 | break; | 
|  | 368 | case 2: | 
|  | 369 | data = *tmp | *(tmp + 1) << 8; | 
|  | 370 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 371 | iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 372 | break; | 
|  | 373 | case 3: | 
|  | 374 | data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; | 
|  | 375 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 376 | iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 377 | break; | 
|  | 378 | default: | 
|  | 379 | break; | 
|  | 380 | } | 
|  | 381 | req->req.actual += length; | 
|  | 382 | } | 
|  | 383 | } | 
|  | 384 |  | 
|  | 385 | static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep) | 
|  | 386 | { | 
|  | 387 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), | 
|  | 388 | FUSB300_EPSET0_STL); | 
|  | 389 | } | 
|  | 390 |  | 
|  | 391 | static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep) | 
|  | 392 | { | 
|  | 393 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); | 
|  | 394 |  | 
|  | 395 | if (reg & FUSB300_EPSET0_STL) { | 
|  | 396 | printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); | 
|  | 397 | reg &= ~FUSB300_EPSET0_STL; | 
|  | 398 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); | 
|  | 399 | } | 
|  | 400 | } | 
|  | 401 |  | 
|  | 402 | static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req) | 
|  | 403 | { | 
|  | 404 | if (ep->fusb300->ep0_dir) { /* if IN */ | 
|  | 405 | if (req->req.length) { | 
|  | 406 | fusb300_wrcxf(ep, req); | 
|  | 407 | } else | 
|  | 408 | printk(KERN_DEBUG "%s : req->req.length = 0x%x\n", | 
|  | 409 | __func__, req->req.length); | 
|  | 410 | if ((req->req.length == req->req.actual) || | 
|  | 411 | (req->req.actual < ep->ep.maxpacket)) | 
|  | 412 | done(ep, req, 0); | 
|  | 413 | } else { /* OUT */ | 
|  | 414 | if (!req->req.length) | 
|  | 415 | done(ep, req, 0); | 
|  | 416 | else | 
|  | 417 | fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1, | 
|  | 418 | FUSB300_IGER1_CX_OUT_INT); | 
|  | 419 | } | 
|  | 420 | } | 
|  | 421 |  | 
|  | 422 | static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, | 
|  | 423 | gfp_t gfp_flags) | 
|  | 424 | { | 
|  | 425 | struct fusb300_ep *ep; | 
|  | 426 | struct fusb300_request *req; | 
|  | 427 | unsigned long flags; | 
|  | 428 | int request  = 0; | 
|  | 429 |  | 
|  | 430 | ep = container_of(_ep, struct fusb300_ep, ep); | 
|  | 431 | req = container_of(_req, struct fusb300_request, req); | 
|  | 432 |  | 
|  | 433 | if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) | 
|  | 434 | return -ESHUTDOWN; | 
|  | 435 |  | 
|  | 436 | spin_lock_irqsave(&ep->fusb300->lock, flags); | 
|  | 437 |  | 
|  | 438 | if (list_empty(&ep->queue)) | 
|  | 439 | request = 1; | 
|  | 440 |  | 
|  | 441 | list_add_tail(&req->queue, &ep->queue); | 
|  | 442 |  | 
|  | 443 | req->req.actual = 0; | 
|  | 444 | req->req.status = -EINPROGRESS; | 
|  | 445 |  | 
|  | 446 | if (ep->desc == NULL) /* ep0 */ | 
|  | 447 | ep0_queue(ep, req); | 
|  | 448 | else if (request && !ep->stall) | 
|  | 449 | enable_fifo_int(ep); | 
|  | 450 |  | 
|  | 451 | spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
|  | 452 |  | 
|  | 453 | return 0; | 
|  | 454 | } | 
|  | 455 |  | 
|  | 456 | static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req) | 
|  | 457 | { | 
|  | 458 | struct fusb300_ep *ep; | 
|  | 459 | struct fusb300_request *req; | 
|  | 460 | unsigned long flags; | 
|  | 461 |  | 
|  | 462 | ep = container_of(_ep, struct fusb300_ep, ep); | 
|  | 463 | req = container_of(_req, struct fusb300_request, req); | 
|  | 464 |  | 
|  | 465 | spin_lock_irqsave(&ep->fusb300->lock, flags); | 
|  | 466 | if (!list_empty(&ep->queue)) | 
|  | 467 | done(ep, req, -ECONNRESET); | 
|  | 468 | spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
|  | 469 |  | 
|  | 470 | return 0; | 
|  | 471 | } | 
|  | 472 |  | 
|  | 473 | static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) | 
|  | 474 | { | 
|  | 475 | struct fusb300_ep *ep; | 
|  | 476 | struct fusb300 *fusb300; | 
|  | 477 | unsigned long flags; | 
|  | 478 | int ret = 0; | 
|  | 479 |  | 
|  | 480 | ep = container_of(_ep, struct fusb300_ep, ep); | 
|  | 481 |  | 
|  | 482 | fusb300 = ep->fusb300; | 
|  | 483 |  | 
|  | 484 | spin_lock_irqsave(&ep->fusb300->lock, flags); | 
|  | 485 |  | 
|  | 486 | if (!list_empty(&ep->queue)) { | 
|  | 487 | ret = -EAGAIN; | 
|  | 488 | goto out; | 
|  | 489 | } | 
|  | 490 |  | 
|  | 491 | if (value) { | 
|  | 492 | fusb300_set_epnstall(fusb300, ep->epnum); | 
|  | 493 | ep->stall = 1; | 
|  | 494 | if (wedge) | 
|  | 495 | ep->wedged = 1; | 
|  | 496 | } else { | 
|  | 497 | fusb300_clear_epnstall(fusb300, ep->epnum); | 
|  | 498 | ep->stall = 0; | 
|  | 499 | ep->wedged = 0; | 
|  | 500 | } | 
|  | 501 |  | 
|  | 502 | out: | 
|  | 503 | spin_unlock_irqrestore(&ep->fusb300->lock, flags); | 
|  | 504 | return ret; | 
|  | 505 | } | 
|  | 506 |  | 
|  | 507 | static int fusb300_set_halt(struct usb_ep *_ep, int value) | 
|  | 508 | { | 
|  | 509 | return fusb300_set_halt_and_wedge(_ep, value, 0); | 
|  | 510 | } | 
|  | 511 |  | 
|  | 512 | static int fusb300_set_wedge(struct usb_ep *_ep) | 
|  | 513 | { | 
|  | 514 | return fusb300_set_halt_and_wedge(_ep, 1, 1); | 
|  | 515 | } | 
|  | 516 |  | 
|  | 517 | static void fusb300_fifo_flush(struct usb_ep *_ep) | 
|  | 518 | { | 
|  | 519 | } | 
|  | 520 |  | 
|  | 521 | static struct usb_ep_ops fusb300_ep_ops = { | 
|  | 522 | .enable		= fusb300_enable, | 
|  | 523 | .disable	= fusb300_disable, | 
|  | 524 |  | 
|  | 525 | .alloc_request	= fusb300_alloc_request, | 
|  | 526 | .free_request	= fusb300_free_request, | 
|  | 527 |  | 
|  | 528 | .queue		= fusb300_queue, | 
|  | 529 | .dequeue	= fusb300_dequeue, | 
|  | 530 |  | 
|  | 531 | .set_halt	= fusb300_set_halt, | 
|  | 532 | .fifo_flush	= fusb300_fifo_flush, | 
|  | 533 | .set_wedge	= fusb300_set_wedge, | 
|  | 534 | }; | 
|  | 535 |  | 
|  | 536 | /*****************************************************************************/ | 
|  | 537 | static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset, | 
|  | 538 | u32 value) | 
|  | 539 | { | 
|  | 540 | iowrite32(value, fusb300->reg + offset); | 
|  | 541 | } | 
|  | 542 |  | 
|  | 543 | static void fusb300_reset(void) | 
|  | 544 | { | 
|  | 545 | } | 
|  | 546 |  | 
|  | 547 | static void fusb300_set_cxstall(struct fusb300 *fusb300) | 
|  | 548 | { | 
|  | 549 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, | 
|  | 550 | FUSB300_CSR_STL); | 
|  | 551 | } | 
|  | 552 |  | 
|  | 553 | static void fusb300_set_cxdone(struct fusb300 *fusb300) | 
|  | 554 | { | 
|  | 555 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, | 
|  | 556 | FUSB300_CSR_DONE); | 
|  | 557 | } | 
|  | 558 |  | 
|  | 559 | /* read data from cx fifo */ | 
|  | 560 | void fusb300_rdcxf(struct fusb300 *fusb300, | 
|  | 561 | u8 *buffer, u32 length) | 
|  | 562 | { | 
|  | 563 | int i = 0; | 
|  | 564 | u8 *tmp; | 
|  | 565 | u32 data; | 
|  | 566 |  | 
|  | 567 | tmp = buffer; | 
|  | 568 |  | 
|  | 569 | for (i = (length >> 2); i > 0; i--) { | 
|  | 570 | data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 571 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 572 | *tmp = data & 0xFF; | 
|  | 573 | *(tmp + 1) = (data >> 8) & 0xFF; | 
|  | 574 | *(tmp + 2) = (data >> 16) & 0xFF; | 
|  | 575 | *(tmp + 3) = (data >> 24) & 0xFF; | 
|  | 576 | tmp = tmp + 4; | 
|  | 577 | } | 
|  | 578 |  | 
|  | 579 | switch (length % 4) { | 
|  | 580 | case 1: | 
|  | 581 | data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 582 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 583 | *tmp = data & 0xFF; | 
|  | 584 | break; | 
|  | 585 | case 2: | 
|  | 586 | data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 587 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 588 | *tmp = data & 0xFF; | 
|  | 589 | *(tmp + 1) = (data >> 8) & 0xFF; | 
|  | 590 | break; | 
|  | 591 | case 3: | 
|  | 592 | data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); | 
|  | 593 | printk(KERN_DEBUG "    0x%x\n", data); | 
|  | 594 | *tmp = data & 0xFF; | 
|  | 595 | *(tmp + 1) = (data >> 8) & 0xFF; | 
|  | 596 | *(tmp + 2) = (data >> 16) & 0xFF; | 
|  | 597 | break; | 
|  | 598 | default: | 
|  | 599 | break; | 
|  | 600 | } | 
|  | 601 | } | 
|  | 602 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 603 | static void fusb300_rdfifo(struct fusb300_ep *ep, | 
|  | 604 | struct fusb300_request *req, | 
|  | 605 | u32 length) | 
|  | 606 | { | 
|  | 607 | int i = 0; | 
|  | 608 | u8 *tmp; | 
|  | 609 | u32 data, reg; | 
|  | 610 | struct fusb300 *fusb300 = ep->fusb300; | 
|  | 611 |  | 
|  | 612 | tmp = req->req.buf + req->req.actual; | 
|  | 613 | req->req.actual += length; | 
|  | 614 |  | 
|  | 615 | if (req->req.actual > req->req.length) | 
|  | 616 | printk(KERN_DEBUG "req->req.actual > req->req.length\n"); | 
|  | 617 |  | 
|  | 618 | for (i = (length >> 2); i > 0; i--) { | 
|  | 619 | data = ioread32(fusb300->reg + | 
|  | 620 | FUSB300_OFFSET_EPPORT(ep->epnum)); | 
|  | 621 | *tmp = data & 0xFF; | 
|  | 622 | *(tmp + 1) = (data >> 8) & 0xFF; | 
|  | 623 | *(tmp + 2) = (data >> 16) & 0xFF; | 
|  | 624 | *(tmp + 3) = (data >> 24) & 0xFF; | 
|  | 625 | tmp = tmp + 4; | 
|  | 626 | } | 
|  | 627 |  | 
|  | 628 | switch (length % 4) { | 
|  | 629 | case 1: | 
|  | 630 | data = ioread32(fusb300->reg + | 
|  | 631 | FUSB300_OFFSET_EPPORT(ep->epnum)); | 
|  | 632 | *tmp = data & 0xFF; | 
|  | 633 | break; | 
|  | 634 | case 2: | 
|  | 635 | data = ioread32(fusb300->reg + | 
|  | 636 | FUSB300_OFFSET_EPPORT(ep->epnum)); | 
|  | 637 | *tmp = data & 0xFF; | 
|  | 638 | *(tmp + 1) = (data >> 8) & 0xFF; | 
|  | 639 | break; | 
|  | 640 | case 3: | 
|  | 641 | data = ioread32(fusb300->reg + | 
|  | 642 | FUSB300_OFFSET_EPPORT(ep->epnum)); | 
|  | 643 | *tmp = data & 0xFF; | 
|  | 644 | *(tmp + 1) = (data >> 8) & 0xFF; | 
|  | 645 | *(tmp + 2) = (data >> 16) & 0xFF; | 
|  | 646 | break; | 
|  | 647 | default: | 
|  | 648 | break; | 
|  | 649 | } | 
|  | 650 |  | 
|  | 651 | do { | 
|  | 652 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); | 
|  | 653 | reg &= FUSB300_IGR1_SYNF0_EMPTY_INT; | 
|  | 654 | if (i) | 
|  | 655 | printk(KERN_INFO "sync fifo is not empty!\n"); | 
|  | 656 | i++; | 
|  | 657 | } while (!reg); | 
|  | 658 | } | 
|  | 659 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 660 | static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep) | 
|  | 661 | { | 
|  | 662 | u8 value; | 
|  | 663 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); | 
|  | 664 |  | 
|  | 665 | value = reg & FUSB300_EPSET0_STL; | 
|  | 666 |  | 
|  | 667 | return value; | 
|  | 668 | } | 
|  | 669 |  | 
|  | 670 | static u8 fusb300_get_cxstall(struct fusb300 *fusb300) | 
|  | 671 | { | 
|  | 672 | u8 value; | 
|  | 673 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); | 
|  | 674 |  | 
|  | 675 | value = (reg & FUSB300_CSR_STL) >> 1; | 
|  | 676 |  | 
|  | 677 | return value; | 
|  | 678 | } | 
|  | 679 |  | 
|  | 680 | static void request_error(struct fusb300 *fusb300) | 
|  | 681 | { | 
|  | 682 | fusb300_set_cxstall(fusb300); | 
|  | 683 | printk(KERN_DEBUG "request error!!\n"); | 
|  | 684 | } | 
|  | 685 |  | 
|  | 686 | static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
|  | 687 | __releases(fusb300->lock) | 
|  | 688 | __acquires(fusb300->lock) | 
|  | 689 | { | 
|  | 690 | u8 ep; | 
|  | 691 | u16 status = 0; | 
|  | 692 | u16 w_index = ctrl->wIndex; | 
|  | 693 |  | 
|  | 694 | switch (ctrl->bRequestType & USB_RECIP_MASK) { | 
|  | 695 | case USB_RECIP_DEVICE: | 
|  | 696 | status = 1 << USB_DEVICE_SELF_POWERED; | 
|  | 697 | break; | 
|  | 698 | case USB_RECIP_INTERFACE: | 
|  | 699 | status = 0; | 
|  | 700 | break; | 
|  | 701 | case USB_RECIP_ENDPOINT: | 
|  | 702 | ep = w_index & USB_ENDPOINT_NUMBER_MASK; | 
|  | 703 | if (ep) { | 
|  | 704 | if (fusb300_get_epnstall(fusb300, ep)) | 
|  | 705 | status = 1 << USB_ENDPOINT_HALT; | 
|  | 706 | } else { | 
|  | 707 | if (fusb300_get_cxstall(fusb300)) | 
|  | 708 | status = 0; | 
|  | 709 | } | 
|  | 710 | break; | 
|  | 711 |  | 
|  | 712 | default: | 
|  | 713 | request_error(fusb300); | 
|  | 714 | return;		/* exit */ | 
|  | 715 | } | 
|  | 716 |  | 
|  | 717 | fusb300->ep0_data = cpu_to_le16(status); | 
|  | 718 | fusb300->ep0_req->buf = &fusb300->ep0_data; | 
|  | 719 | fusb300->ep0_req->length = 2; | 
|  | 720 |  | 
|  | 721 | spin_unlock(&fusb300->lock); | 
|  | 722 | fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL); | 
|  | 723 | spin_lock(&fusb300->lock); | 
|  | 724 | } | 
|  | 725 |  | 
|  | 726 | static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
|  | 727 | { | 
|  | 728 | u8 ep; | 
|  | 729 |  | 
|  | 730 | switch (ctrl->bRequestType & USB_RECIP_MASK) { | 
|  | 731 | case USB_RECIP_DEVICE: | 
|  | 732 | fusb300_set_cxdone(fusb300); | 
|  | 733 | break; | 
|  | 734 | case USB_RECIP_INTERFACE: | 
|  | 735 | fusb300_set_cxdone(fusb300); | 
|  | 736 | break; | 
|  | 737 | case USB_RECIP_ENDPOINT: { | 
|  | 738 | u16 w_index = le16_to_cpu(ctrl->wIndex); | 
|  | 739 |  | 
|  | 740 | ep = w_index & USB_ENDPOINT_NUMBER_MASK; | 
|  | 741 | if (ep) | 
|  | 742 | fusb300_set_epnstall(fusb300, ep); | 
|  | 743 | else | 
|  | 744 | fusb300_set_cxstall(fusb300); | 
|  | 745 | fusb300_set_cxdone(fusb300); | 
|  | 746 | } | 
|  | 747 | break; | 
|  | 748 | default: | 
|  | 749 | request_error(fusb300); | 
|  | 750 | break; | 
|  | 751 | } | 
|  | 752 | } | 
|  | 753 |  | 
|  | 754 | static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep) | 
|  | 755 | { | 
|  | 756 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), | 
|  | 757 | FUSB300_EPSET0_CLRSEQNUM); | 
|  | 758 | } | 
|  | 759 |  | 
|  | 760 | static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
|  | 761 | { | 
|  | 762 | struct fusb300_ep *ep = | 
|  | 763 | fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK]; | 
|  | 764 |  | 
|  | 765 | switch (ctrl->bRequestType & USB_RECIP_MASK) { | 
|  | 766 | case USB_RECIP_DEVICE: | 
|  | 767 | fusb300_set_cxdone(fusb300); | 
|  | 768 | break; | 
|  | 769 | case USB_RECIP_INTERFACE: | 
|  | 770 | fusb300_set_cxdone(fusb300); | 
|  | 771 | break; | 
|  | 772 | case USB_RECIP_ENDPOINT: | 
|  | 773 | if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) { | 
|  | 774 | if (ep->wedged) { | 
|  | 775 | fusb300_set_cxdone(fusb300); | 
|  | 776 | break; | 
|  | 777 | } | 
|  | 778 | if (ep->stall) { | 
|  | 779 | ep->stall = 0; | 
|  | 780 | fusb300_clear_seqnum(fusb300, ep->epnum); | 
|  | 781 | fusb300_clear_epnstall(fusb300, ep->epnum); | 
|  | 782 | if (!list_empty(&ep->queue)) | 
|  | 783 | enable_fifo_int(ep); | 
|  | 784 | } | 
|  | 785 | } | 
|  | 786 | fusb300_set_cxdone(fusb300); | 
|  | 787 | break; | 
|  | 788 | default: | 
|  | 789 | request_error(fusb300); | 
|  | 790 | break; | 
|  | 791 | } | 
|  | 792 | } | 
|  | 793 |  | 
|  | 794 | static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr) | 
|  | 795 | { | 
|  | 796 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR); | 
|  | 797 |  | 
|  | 798 | reg &= ~FUSB300_DAR_DRVADDR_MSK; | 
|  | 799 | reg |= FUSB300_DAR_DRVADDR(addr); | 
|  | 800 |  | 
|  | 801 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR); | 
|  | 802 | } | 
|  | 803 |  | 
|  | 804 | static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
|  | 805 | { | 
|  | 806 | if (ctrl->wValue >= 0x0100) | 
|  | 807 | request_error(fusb300); | 
|  | 808 | else { | 
|  | 809 | fusb300_set_dev_addr(fusb300, ctrl->wValue); | 
|  | 810 | fusb300_set_cxdone(fusb300); | 
|  | 811 | } | 
|  | 812 | } | 
|  | 813 |  | 
|  | 814 | #define UVC_COPY_DESCRIPTORS(mem, src) \ | 
|  | 815 | do { \ | 
|  | 816 | const struct usb_descriptor_header * const *__src; \ | 
|  | 817 | for (__src = src; *__src; ++__src) { \ | 
|  | 818 | memcpy(mem, *__src, (*__src)->bLength); \ | 
|  | 819 | mem += (*__src)->bLength; \ | 
|  | 820 | } \ | 
|  | 821 | } while (0) | 
|  | 822 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 823 | static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) | 
|  | 824 | { | 
|  | 825 | u8 *p = (u8 *)ctrl; | 
|  | 826 | u8 ret = 0; | 
|  | 827 | u8 i = 0; | 
|  | 828 |  | 
|  | 829 | fusb300_rdcxf(fusb300, p, 8); | 
|  | 830 | fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN; | 
|  | 831 | fusb300->ep0_length = ctrl->wLength; | 
|  | 832 |  | 
|  | 833 | /* check request */ | 
|  | 834 | if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { | 
|  | 835 | switch (ctrl->bRequest) { | 
|  | 836 | case USB_REQ_GET_STATUS: | 
|  | 837 | get_status(fusb300, ctrl); | 
|  | 838 | break; | 
|  | 839 | case USB_REQ_CLEAR_FEATURE: | 
|  | 840 | clear_feature(fusb300, ctrl); | 
|  | 841 | break; | 
|  | 842 | case USB_REQ_SET_FEATURE: | 
|  | 843 | set_feature(fusb300, ctrl); | 
|  | 844 | break; | 
|  | 845 | case USB_REQ_SET_ADDRESS: | 
|  | 846 | set_address(fusb300, ctrl); | 
|  | 847 | break; | 
|  | 848 | case USB_REQ_SET_CONFIGURATION: | 
|  | 849 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR, | 
|  | 850 | FUSB300_DAR_SETCONFG); | 
|  | 851 | /* clear sequence number */ | 
|  | 852 | for (i = 1; i <= FUSB300_MAX_NUM_EP; i++) | 
|  | 853 | fusb300_clear_seqnum(fusb300, i); | 
|  | 854 | fusb300->reenum = 1; | 
|  | 855 | ret = 1; | 
|  | 856 | break; | 
|  | 857 | default: | 
|  | 858 | ret = 1; | 
|  | 859 | break; | 
|  | 860 | } | 
|  | 861 | } else | 
|  | 862 | ret = 1; | 
|  | 863 |  | 
|  | 864 | return ret; | 
|  | 865 | } | 
|  | 866 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 867 | static void done(struct fusb300_ep *ep, struct fusb300_request *req, | 
|  | 868 | int status) | 
|  | 869 | { | 
|  | 870 | list_del_init(&req->queue); | 
|  | 871 |  | 
|  | 872 | /* don't modify queue heads during completion callback */ | 
|  | 873 | if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) | 
|  | 874 | req->req.status = -ESHUTDOWN; | 
|  | 875 | else | 
|  | 876 | req->req.status = status; | 
|  | 877 |  | 
|  | 878 | spin_unlock(&ep->fusb300->lock); | 
|  | 879 | req->req.complete(&ep->ep, &req->req); | 
|  | 880 | spin_lock(&ep->fusb300->lock); | 
|  | 881 |  | 
|  | 882 | if (ep->epnum) { | 
|  | 883 | disable_fifo_int(ep); | 
|  | 884 | if (!list_empty(&ep->queue)) | 
|  | 885 | enable_fifo_int(ep); | 
|  | 886 | } else | 
|  | 887 | fusb300_set_cxdone(ep->fusb300); | 
|  | 888 | } | 
|  | 889 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 890 | static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d, | 
|  | 891 | u32 len) | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 892 | { | 
|  | 893 | u32 value; | 
|  | 894 | u32 reg; | 
|  | 895 |  | 
|  | 896 | /* wait SW owner */ | 
|  | 897 | do { | 
|  | 898 | reg = ioread32(ep->fusb300->reg + | 
|  | 899 | FUSB300_OFFSET_EPPRD_W0(ep->epnum)); | 
|  | 900 | reg &= FUSB300_EPPRD0_H; | 
|  | 901 | } while (reg); | 
|  | 902 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 903 | iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum)); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 904 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 905 | value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H | | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 906 | FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I; | 
|  | 907 | iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); | 
|  | 908 |  | 
|  | 909 | iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum)); | 
|  | 910 |  | 
|  | 911 | fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY, | 
|  | 912 | FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum)); | 
|  | 913 | } | 
|  | 914 |  | 
|  | 915 | static void fusb300_wait_idma_finished(struct fusb300_ep *ep) | 
|  | 916 | { | 
|  | 917 | u32 reg; | 
|  | 918 |  | 
|  | 919 | do { | 
|  | 920 | reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1); | 
|  | 921 | if ((reg & FUSB300_IGR1_VBUS_CHG_INT) || | 
|  | 922 | (reg & FUSB300_IGR1_WARM_RST_INT) || | 
|  | 923 | (reg & FUSB300_IGR1_HOT_RST_INT) || | 
|  | 924 | (reg & FUSB300_IGR1_USBRST_INT) | 
|  | 925 | ) | 
|  | 926 | goto IDMA_RESET; | 
|  | 927 | reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0); | 
|  | 928 | reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum); | 
|  | 929 | } while (!reg); | 
|  | 930 |  | 
|  | 931 | fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0, | 
|  | 932 | FUSB300_IGR0_EPn_PRD_INT(ep->epnum)); | 
|  | 933 | IDMA_RESET: | 
|  | 934 | fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0, | 
|  | 935 | FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); | 
|  | 936 | } | 
|  | 937 |  | 
|  | 938 | static void  fusb300_set_idma(struct fusb300_ep *ep, | 
|  | 939 | struct fusb300_request *req) | 
|  | 940 | { | 
|  | 941 | dma_addr_t d; | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 942 |  | 
|  | 943 | d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE); | 
|  | 944 |  | 
|  | 945 | if (dma_mapping_error(NULL, d)) { | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 946 | printk(KERN_DEBUG "dma_mapping_error\n"); | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 947 | return; | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 948 | } | 
|  | 949 |  | 
|  | 950 | dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE); | 
|  | 951 |  | 
|  | 952 | fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0, | 
|  | 953 | FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); | 
|  | 954 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 955 | fusb300_fill_idma_prdtbl(ep, d, req->req.length); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 956 | /* check idma is done */ | 
|  | 957 | fusb300_wait_idma_finished(ep); | 
|  | 958 |  | 
| Sebastian Andrzej Siewior | 1425b80 | 2011-07-05 15:59:05 +0300 | [diff] [blame] | 959 | dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 960 | } | 
|  | 961 |  | 
|  | 962 | static void in_ep_fifo_handler(struct fusb300_ep *ep) | 
|  | 963 | { | 
|  | 964 | struct fusb300_request *req = list_entry(ep->queue.next, | 
|  | 965 | struct fusb300_request, queue); | 
|  | 966 |  | 
| Felipe Balbi | 4dbafd3 | 2011-07-04 11:09:15 +0300 | [diff] [blame] | 967 | if (req->req.length) | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 968 | fusb300_set_idma(ep, req); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 969 | done(ep, req, 0); | 
|  | 970 | } | 
|  | 971 |  | 
|  | 972 | static void out_ep_fifo_handler(struct fusb300_ep *ep) | 
|  | 973 | { | 
|  | 974 | struct fusb300 *fusb300 = ep->fusb300; | 
|  | 975 | struct fusb300_request *req = list_entry(ep->queue.next, | 
|  | 976 | struct fusb300_request, queue); | 
|  | 977 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); | 
|  | 978 | u32 length = reg & FUSB300_FFR_BYCNT; | 
|  | 979 |  | 
|  | 980 | fusb300_rdfifo(ep, req, length); | 
|  | 981 |  | 
|  | 982 | /* finish out transfer */ | 
|  | 983 | if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket)) | 
|  | 984 | done(ep, req, 0); | 
|  | 985 | } | 
|  | 986 |  | 
|  | 987 | static void check_device_mode(struct fusb300 *fusb300) | 
|  | 988 | { | 
|  | 989 | u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR); | 
|  | 990 |  | 
|  | 991 | switch (reg & FUSB300_GCR_DEVEN_MSK) { | 
|  | 992 | case FUSB300_GCR_DEVEN_SS: | 
|  | 993 | fusb300->gadget.speed = USB_SPEED_SUPER; | 
|  | 994 | break; | 
|  | 995 | case FUSB300_GCR_DEVEN_HS: | 
|  | 996 | fusb300->gadget.speed = USB_SPEED_HIGH; | 
|  | 997 | break; | 
|  | 998 | case FUSB300_GCR_DEVEN_FS: | 
|  | 999 | fusb300->gadget.speed = USB_SPEED_FULL; | 
|  | 1000 | break; | 
|  | 1001 | default: | 
|  | 1002 | fusb300->gadget.speed = USB_SPEED_UNKNOWN; | 
|  | 1003 | break; | 
|  | 1004 | } | 
|  | 1005 | printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK)); | 
|  | 1006 | } | 
|  | 1007 |  | 
|  | 1008 |  | 
|  | 1009 | static void fusb300_ep0out(struct fusb300 *fusb300) | 
|  | 1010 | { | 
|  | 1011 | struct fusb300_ep *ep = fusb300->ep[0]; | 
|  | 1012 | u32 reg; | 
|  | 1013 |  | 
|  | 1014 | if (!list_empty(&ep->queue)) { | 
|  | 1015 | struct fusb300_request *req; | 
|  | 1016 |  | 
|  | 1017 | req = list_first_entry(&ep->queue, | 
|  | 1018 | struct fusb300_request, queue); | 
|  | 1019 | if (req->req.length) | 
|  | 1020 | fusb300_rdcxf(ep->fusb300, req->req.buf, | 
|  | 1021 | req->req.length); | 
|  | 1022 | done(ep, req, 0); | 
|  | 1023 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); | 
|  | 1024 | reg &= ~FUSB300_IGER1_CX_OUT_INT; | 
|  | 1025 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1); | 
|  | 1026 | } else | 
|  | 1027 | pr_err("%s : empty queue\n", __func__); | 
|  | 1028 | } | 
|  | 1029 |  | 
|  | 1030 | static void fusb300_ep0in(struct fusb300 *fusb300) | 
|  | 1031 | { | 
|  | 1032 | struct fusb300_request *req; | 
|  | 1033 | struct fusb300_ep *ep = fusb300->ep[0]; | 
|  | 1034 |  | 
|  | 1035 | if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) { | 
|  | 1036 | req = list_entry(ep->queue.next, | 
|  | 1037 | struct fusb300_request, queue); | 
|  | 1038 | if (req->req.length) | 
|  | 1039 | fusb300_wrcxf(ep, req); | 
|  | 1040 | if ((req->req.length - req->req.actual) < ep->ep.maxpacket) | 
|  | 1041 | done(ep, req, 0); | 
|  | 1042 | } else | 
|  | 1043 | fusb300_set_cxdone(fusb300); | 
|  | 1044 | } | 
|  | 1045 |  | 
|  | 1046 | static void fusb300_grp2_handler(void) | 
|  | 1047 | { | 
|  | 1048 | } | 
|  | 1049 |  | 
|  | 1050 | static void fusb300_grp3_handler(void) | 
|  | 1051 | { | 
|  | 1052 | } | 
|  | 1053 |  | 
|  | 1054 | static void fusb300_grp4_handler(void) | 
|  | 1055 | { | 
|  | 1056 | } | 
|  | 1057 |  | 
|  | 1058 | static void fusb300_grp5_handler(void) | 
|  | 1059 | { | 
|  | 1060 | } | 
|  | 1061 |  | 
|  | 1062 | static irqreturn_t fusb300_irq(int irq, void *_fusb300) | 
|  | 1063 | { | 
|  | 1064 | struct fusb300 *fusb300 = _fusb300; | 
|  | 1065 | u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); | 
|  | 1066 | u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); | 
|  | 1067 | u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0); | 
|  | 1068 | u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0); | 
|  | 1069 | struct usb_ctrlrequest ctrl; | 
|  | 1070 | u8 in; | 
|  | 1071 | u32 reg; | 
|  | 1072 | int i; | 
|  | 1073 |  | 
|  | 1074 | spin_lock(&fusb300->lock); | 
|  | 1075 |  | 
|  | 1076 | int_grp1 &= int_grp1_en; | 
|  | 1077 | int_grp0 &= int_grp0_en; | 
|  | 1078 |  | 
|  | 1079 | if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) { | 
|  | 1080 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1081 | FUSB300_IGR1_WARM_RST_INT); | 
|  | 1082 | printk(KERN_INFO"fusb300_warmreset\n"); | 
|  | 1083 | fusb300_reset(); | 
|  | 1084 | } | 
|  | 1085 |  | 
|  | 1086 | if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) { | 
|  | 1087 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1088 | FUSB300_IGR1_HOT_RST_INT); | 
|  | 1089 | printk(KERN_INFO"fusb300_hotreset\n"); | 
|  | 1090 | fusb300_reset(); | 
|  | 1091 | } | 
|  | 1092 |  | 
|  | 1093 | if (int_grp1 & FUSB300_IGR1_USBRST_INT) { | 
|  | 1094 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1095 | FUSB300_IGR1_USBRST_INT); | 
|  | 1096 | fusb300_reset(); | 
|  | 1097 | } | 
|  | 1098 | /* COMABT_INT has a highest priority */ | 
|  | 1099 |  | 
|  | 1100 | if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) { | 
|  | 1101 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1102 | FUSB300_IGR1_CX_COMABT_INT); | 
|  | 1103 | printk(KERN_INFO"fusb300_ep0abt\n"); | 
|  | 1104 | } | 
|  | 1105 |  | 
|  | 1106 | if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) { | 
|  | 1107 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1108 | FUSB300_IGR1_VBUS_CHG_INT); | 
|  | 1109 | printk(KERN_INFO"fusb300_vbus_change\n"); | 
|  | 1110 | } | 
|  | 1111 |  | 
|  | 1112 | if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) { | 
|  | 1113 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1114 | FUSB300_IGR1_U3_EXIT_FAIL_INT); | 
|  | 1115 | } | 
|  | 1116 |  | 
|  | 1117 | if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) { | 
|  | 1118 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1119 | FUSB300_IGR1_U2_EXIT_FAIL_INT); | 
|  | 1120 | } | 
|  | 1121 |  | 
|  | 1122 | if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) { | 
|  | 1123 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1124 | FUSB300_IGR1_U1_EXIT_FAIL_INT); | 
|  | 1125 | } | 
|  | 1126 |  | 
|  | 1127 | if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) { | 
|  | 1128 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1129 | FUSB300_IGR1_U2_ENTRY_FAIL_INT); | 
|  | 1130 | } | 
|  | 1131 |  | 
|  | 1132 | if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) { | 
|  | 1133 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1134 | FUSB300_IGR1_U1_ENTRY_FAIL_INT); | 
|  | 1135 | } | 
|  | 1136 |  | 
|  | 1137 | if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) { | 
|  | 1138 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1139 | FUSB300_IGR1_U3_EXIT_INT); | 
|  | 1140 | printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n"); | 
|  | 1141 | } | 
|  | 1142 |  | 
|  | 1143 | if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) { | 
|  | 1144 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1145 | FUSB300_IGR1_U2_EXIT_INT); | 
|  | 1146 | printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n"); | 
|  | 1147 | } | 
|  | 1148 |  | 
|  | 1149 | if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) { | 
|  | 1150 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1151 | FUSB300_IGR1_U1_EXIT_INT); | 
|  | 1152 | printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n"); | 
|  | 1153 | } | 
|  | 1154 |  | 
|  | 1155 | if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) { | 
|  | 1156 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1157 | FUSB300_IGR1_U3_ENTRY_INT); | 
|  | 1158 | printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n"); | 
|  | 1159 | fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1, | 
|  | 1160 | FUSB300_SSCR1_GO_U3_DONE); | 
|  | 1161 | } | 
|  | 1162 |  | 
|  | 1163 | if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) { | 
|  | 1164 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1165 | FUSB300_IGR1_U2_ENTRY_INT); | 
|  | 1166 | printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n"); | 
|  | 1167 | } | 
|  | 1168 |  | 
|  | 1169 | if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) { | 
|  | 1170 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1171 | FUSB300_IGR1_U1_ENTRY_INT); | 
|  | 1172 | printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n"); | 
|  | 1173 | } | 
|  | 1174 |  | 
|  | 1175 | if (int_grp1 & FUSB300_IGR1_RESM_INT) { | 
|  | 1176 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1177 | FUSB300_IGR1_RESM_INT); | 
|  | 1178 | printk(KERN_INFO "fusb300_resume\n"); | 
|  | 1179 | } | 
|  | 1180 |  | 
|  | 1181 | if (int_grp1 & FUSB300_IGR1_SUSP_INT) { | 
|  | 1182 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1183 | FUSB300_IGR1_SUSP_INT); | 
|  | 1184 | printk(KERN_INFO "fusb300_suspend\n"); | 
|  | 1185 | } | 
|  | 1186 |  | 
|  | 1187 | if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) { | 
|  | 1188 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1189 | FUSB300_IGR1_HS_LPM_INT); | 
|  | 1190 | printk(KERN_INFO "fusb300_HS_LPM_INT\n"); | 
|  | 1191 | } | 
|  | 1192 |  | 
|  | 1193 | if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) { | 
|  | 1194 | fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, | 
|  | 1195 | FUSB300_IGR1_DEV_MODE_CHG_INT); | 
|  | 1196 | check_device_mode(fusb300); | 
|  | 1197 | } | 
|  | 1198 |  | 
|  | 1199 | if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) { | 
|  | 1200 | fusb300_set_cxstall(fusb300); | 
|  | 1201 | printk(KERN_INFO "fusb300_ep0fail\n"); | 
|  | 1202 | } | 
|  | 1203 |  | 
|  | 1204 | if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) { | 
|  | 1205 | printk(KERN_INFO "fusb300_ep0setup\n"); | 
|  | 1206 | if (setup_packet(fusb300, &ctrl)) { | 
|  | 1207 | spin_unlock(&fusb300->lock); | 
|  | 1208 | if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0) | 
|  | 1209 | fusb300_set_cxstall(fusb300); | 
|  | 1210 | spin_lock(&fusb300->lock); | 
|  | 1211 | } | 
|  | 1212 | } | 
|  | 1213 |  | 
|  | 1214 | if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT) | 
|  | 1215 | printk(KERN_INFO "fusb300_cmdend\n"); | 
|  | 1216 |  | 
|  | 1217 |  | 
|  | 1218 | if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) { | 
|  | 1219 | printk(KERN_INFO "fusb300_cxout\n"); | 
|  | 1220 | fusb300_ep0out(fusb300); | 
|  | 1221 | } | 
|  | 1222 |  | 
|  | 1223 | if (int_grp1 & FUSB300_IGR1_CX_IN_INT) { | 
|  | 1224 | printk(KERN_INFO "fusb300_cxin\n"); | 
|  | 1225 | fusb300_ep0in(fusb300); | 
|  | 1226 | } | 
|  | 1227 |  | 
|  | 1228 | if (int_grp1 & FUSB300_IGR1_INTGRP5) | 
|  | 1229 | fusb300_grp5_handler(); | 
|  | 1230 |  | 
|  | 1231 | if (int_grp1 & FUSB300_IGR1_INTGRP4) | 
|  | 1232 | fusb300_grp4_handler(); | 
|  | 1233 |  | 
|  | 1234 | if (int_grp1 & FUSB300_IGR1_INTGRP3) | 
|  | 1235 | fusb300_grp3_handler(); | 
|  | 1236 |  | 
|  | 1237 | if (int_grp1 & FUSB300_IGR1_INTGRP2) | 
|  | 1238 | fusb300_grp2_handler(); | 
|  | 1239 |  | 
|  | 1240 | if (int_grp0) { | 
|  | 1241 | for (i = 1; i < FUSB300_MAX_NUM_EP; i++) { | 
|  | 1242 | if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) { | 
|  | 1243 | reg = ioread32(fusb300->reg + | 
|  | 1244 | FUSB300_OFFSET_EPSET1(i)); | 
|  | 1245 | in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0; | 
|  | 1246 | if (in) | 
|  | 1247 | in_ep_fifo_handler(fusb300->ep[i]); | 
|  | 1248 | else | 
|  | 1249 | out_ep_fifo_handler(fusb300->ep[i]); | 
|  | 1250 | } | 
|  | 1251 | } | 
|  | 1252 | } | 
|  | 1253 |  | 
|  | 1254 | spin_unlock(&fusb300->lock); | 
|  | 1255 |  | 
|  | 1256 | return IRQ_HANDLED; | 
|  | 1257 | } | 
|  | 1258 |  | 
|  | 1259 | static void fusb300_set_u2_timeout(struct fusb300 *fusb300, | 
|  | 1260 | u32 time) | 
|  | 1261 | { | 
|  | 1262 | u32 reg; | 
|  | 1263 |  | 
|  | 1264 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); | 
|  | 1265 | reg &= ~0xff; | 
|  | 1266 | reg |= FUSB300_SSCR2_U2TIMEOUT(time); | 
|  | 1267 |  | 
|  | 1268 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); | 
|  | 1269 | } | 
|  | 1270 |  | 
|  | 1271 | static void fusb300_set_u1_timeout(struct fusb300 *fusb300, | 
|  | 1272 | u32 time) | 
|  | 1273 | { | 
|  | 1274 | u32 reg; | 
|  | 1275 |  | 
|  | 1276 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); | 
|  | 1277 | reg &= ~(0xff << 8); | 
|  | 1278 | reg |= FUSB300_SSCR2_U1TIMEOUT(time); | 
|  | 1279 |  | 
|  | 1280 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); | 
|  | 1281 | } | 
|  | 1282 |  | 
|  | 1283 | static void init_controller(struct fusb300 *fusb300) | 
|  | 1284 | { | 
|  | 1285 | u32 reg; | 
|  | 1286 | u32 mask = 0; | 
|  | 1287 | u32 val = 0; | 
|  | 1288 |  | 
|  | 1289 | /* split on */ | 
|  | 1290 | mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON; | 
|  | 1291 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR); | 
|  | 1292 | reg &= ~mask; | 
|  | 1293 | reg |= val; | 
|  | 1294 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR); | 
|  | 1295 |  | 
|  | 1296 | /* enable high-speed LPM */ | 
|  | 1297 | mask = val = FUSB300_HSCR_HS_LPM_PERMIT; | 
|  | 1298 | reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR); | 
|  | 1299 | reg &= ~mask; | 
|  | 1300 | reg |= val; | 
|  | 1301 | iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR); | 
|  | 1302 |  | 
|  | 1303 | /*set u1 u2 timmer*/ | 
|  | 1304 | fusb300_set_u2_timeout(fusb300, 0xff); | 
|  | 1305 | fusb300_set_u1_timeout(fusb300, 0xff); | 
|  | 1306 |  | 
|  | 1307 | /* enable all grp1 interrupt */ | 
|  | 1308 | iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1); | 
|  | 1309 | } | 
|  | 1310 | /*------------------------------------------------------------------------*/ | 
|  | 1311 | static struct fusb300 *the_controller; | 
|  | 1312 |  | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1313 | static int fusb300_udc_start(struct usb_gadget_driver *driver, | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1314 | int (*bind)(struct usb_gadget *)) | 
|  | 1315 | { | 
|  | 1316 | struct fusb300 *fusb300 = the_controller; | 
|  | 1317 | int retval; | 
|  | 1318 |  | 
|  | 1319 | if (!driver | 
| Michal Nazarewicz | 7177aed | 2011-11-19 18:27:38 +0100 | [diff] [blame] | 1320 | || driver->max_speed < USB_SPEED_FULL | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1321 | || !bind | 
|  | 1322 | || !driver->setup) | 
|  | 1323 | return -EINVAL; | 
|  | 1324 |  | 
|  | 1325 | if (!fusb300) | 
|  | 1326 | return -ENODEV; | 
|  | 1327 |  | 
|  | 1328 | if (fusb300->driver) | 
|  | 1329 | return -EBUSY; | 
|  | 1330 |  | 
|  | 1331 | /* hook up the driver */ | 
|  | 1332 | driver->driver.bus = NULL; | 
|  | 1333 | fusb300->driver = driver; | 
|  | 1334 | fusb300->gadget.dev.driver = &driver->driver; | 
|  | 1335 |  | 
|  | 1336 | retval = device_add(&fusb300->gadget.dev); | 
|  | 1337 | if (retval) { | 
|  | 1338 | pr_err("device_add error (%d)\n", retval); | 
|  | 1339 | goto error; | 
|  | 1340 | } | 
|  | 1341 |  | 
|  | 1342 | retval = bind(&fusb300->gadget); | 
|  | 1343 | if (retval) { | 
|  | 1344 | pr_err("bind to driver error (%d)\n", retval); | 
|  | 1345 | device_del(&fusb300->gadget.dev); | 
|  | 1346 | goto error; | 
|  | 1347 | } | 
|  | 1348 |  | 
|  | 1349 | return 0; | 
|  | 1350 |  | 
|  | 1351 | error: | 
|  | 1352 | fusb300->driver = NULL; | 
|  | 1353 | fusb300->gadget.dev.driver = NULL; | 
|  | 1354 |  | 
|  | 1355 | return retval; | 
|  | 1356 | } | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1357 |  | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1358 | static int fusb300_udc_stop(struct usb_gadget_driver *driver) | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1359 | { | 
|  | 1360 | struct fusb300 *fusb300 = the_controller; | 
|  | 1361 |  | 
|  | 1362 | if (driver != fusb300->driver || !driver->unbind) | 
|  | 1363 | return -EINVAL; | 
|  | 1364 |  | 
|  | 1365 | driver->unbind(&fusb300->gadget); | 
|  | 1366 | fusb300->gadget.dev.driver = NULL; | 
|  | 1367 |  | 
|  | 1368 | init_controller(fusb300); | 
|  | 1369 | device_del(&fusb300->gadget.dev); | 
|  | 1370 | fusb300->driver = NULL; | 
|  | 1371 |  | 
|  | 1372 | return 0; | 
|  | 1373 | } | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1374 | /*--------------------------------------------------------------------------*/ | 
|  | 1375 |  | 
|  | 1376 | static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active) | 
|  | 1377 | { | 
|  | 1378 | return 0; | 
|  | 1379 | } | 
|  | 1380 |  | 
|  | 1381 | static struct usb_gadget_ops fusb300_gadget_ops = { | 
|  | 1382 | .pullup		= fusb300_udc_pullup, | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1383 | .start		= fusb300_udc_start, | 
|  | 1384 | .stop		= fusb300_udc_stop, | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1385 | }; | 
|  | 1386 |  | 
|  | 1387 | static int __exit fusb300_remove(struct platform_device *pdev) | 
|  | 1388 | { | 
|  | 1389 | struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev); | 
|  | 1390 |  | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1391 | usb_del_gadget_udc(&fusb300->gadget); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1392 | iounmap(fusb300->reg); | 
|  | 1393 | free_irq(platform_get_irq(pdev, 0), fusb300); | 
|  | 1394 |  | 
|  | 1395 | fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); | 
|  | 1396 | kfree(fusb300); | 
|  | 1397 |  | 
|  | 1398 | return 0; | 
|  | 1399 | } | 
|  | 1400 |  | 
|  | 1401 | static int __init fusb300_probe(struct platform_device *pdev) | 
|  | 1402 | { | 
|  | 1403 | struct resource *res, *ires, *ires1; | 
|  | 1404 | void __iomem *reg = NULL; | 
|  | 1405 | struct fusb300 *fusb300 = NULL; | 
|  | 1406 | struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP]; | 
|  | 1407 | int ret = 0; | 
|  | 1408 | int i; | 
|  | 1409 |  | 
|  | 1410 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | 1411 | if (!res) { | 
|  | 1412 | ret = -ENODEV; | 
|  | 1413 | pr_err("platform_get_resource error.\n"); | 
|  | 1414 | goto clean_up; | 
|  | 1415 | } | 
|  | 1416 |  | 
|  | 1417 | ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
|  | 1418 | if (!ires) { | 
|  | 1419 | ret = -ENODEV; | 
|  | 1420 | dev_err(&pdev->dev, | 
|  | 1421 | "platform_get_resource IORESOURCE_IRQ error.\n"); | 
|  | 1422 | goto clean_up; | 
|  | 1423 | } | 
|  | 1424 |  | 
|  | 1425 | ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); | 
|  | 1426 | if (!ires1) { | 
|  | 1427 | ret = -ENODEV; | 
|  | 1428 | dev_err(&pdev->dev, | 
|  | 1429 | "platform_get_resource IORESOURCE_IRQ 1 error.\n"); | 
|  | 1430 | goto clean_up; | 
|  | 1431 | } | 
|  | 1432 |  | 
|  | 1433 | reg = ioremap(res->start, resource_size(res)); | 
|  | 1434 | if (reg == NULL) { | 
|  | 1435 | ret = -ENOMEM; | 
|  | 1436 | pr_err("ioremap error.\n"); | 
|  | 1437 | goto clean_up; | 
|  | 1438 | } | 
|  | 1439 |  | 
|  | 1440 | /* initialize udc */ | 
|  | 1441 | fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); | 
|  | 1442 | if (fusb300 == NULL) { | 
|  | 1443 | pr_err("kzalloc error\n"); | 
|  | 1444 | goto clean_up; | 
|  | 1445 | } | 
|  | 1446 |  | 
|  | 1447 | for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { | 
|  | 1448 | _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); | 
|  | 1449 | if (_ep[i] == NULL) { | 
|  | 1450 | pr_err("_ep kzalloc error\n"); | 
|  | 1451 | goto clean_up; | 
|  | 1452 | } | 
|  | 1453 | fusb300->ep[i] = _ep[i]; | 
|  | 1454 | } | 
|  | 1455 |  | 
|  | 1456 | spin_lock_init(&fusb300->lock); | 
|  | 1457 |  | 
|  | 1458 | dev_set_drvdata(&pdev->dev, fusb300); | 
|  | 1459 |  | 
|  | 1460 | fusb300->gadget.ops = &fusb300_gadget_ops; | 
|  | 1461 |  | 
|  | 1462 | device_initialize(&fusb300->gadget.dev); | 
|  | 1463 |  | 
|  | 1464 | dev_set_name(&fusb300->gadget.dev, "gadget"); | 
|  | 1465 |  | 
| Michal Nazarewicz | d327ab5 | 2011-11-19 18:27:37 +0100 | [diff] [blame] | 1466 | fusb300->gadget.max_speed = USB_SPEED_HIGH; | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1467 | fusb300->gadget.dev.parent = &pdev->dev; | 
|  | 1468 | fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask; | 
|  | 1469 | fusb300->gadget.dev.release = pdev->dev.release; | 
|  | 1470 | fusb300->gadget.name = udc_name; | 
|  | 1471 | fusb300->reg = reg; | 
|  | 1472 |  | 
| Yong Zhang | b5dd18d | 2011-09-07 16:10:52 +0800 | [diff] [blame] | 1473 | ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED, | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1474 | udc_name, fusb300); | 
|  | 1475 | if (ret < 0) { | 
|  | 1476 | pr_err("request_irq error (%d)\n", ret); | 
|  | 1477 | goto clean_up; | 
|  | 1478 | } | 
|  | 1479 |  | 
|  | 1480 | ret = request_irq(ires1->start, fusb300_irq, | 
| Yong Zhang | b5dd18d | 2011-09-07 16:10:52 +0800 | [diff] [blame] | 1481 | IRQF_SHARED, udc_name, fusb300); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1482 | if (ret < 0) { | 
|  | 1483 | pr_err("request_irq1 error (%d)\n", ret); | 
|  | 1484 | goto clean_up; | 
|  | 1485 | } | 
|  | 1486 |  | 
|  | 1487 | INIT_LIST_HEAD(&fusb300->gadget.ep_list); | 
|  | 1488 |  | 
|  | 1489 | for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) { | 
|  | 1490 | struct fusb300_ep *ep = fusb300->ep[i]; | 
|  | 1491 |  | 
|  | 1492 | if (i != 0) { | 
|  | 1493 | INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list); | 
|  | 1494 | list_add_tail(&fusb300->ep[i]->ep.ep_list, | 
|  | 1495 | &fusb300->gadget.ep_list); | 
|  | 1496 | } | 
|  | 1497 | ep->fusb300 = fusb300; | 
|  | 1498 | INIT_LIST_HEAD(&ep->queue); | 
|  | 1499 | ep->ep.name = fusb300_ep_name[i]; | 
|  | 1500 | ep->ep.ops = &fusb300_ep_ops; | 
|  | 1501 | ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE; | 
|  | 1502 | } | 
|  | 1503 | fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE; | 
|  | 1504 | fusb300->ep[0]->epnum = 0; | 
|  | 1505 | fusb300->gadget.ep0 = &fusb300->ep[0]->ep; | 
|  | 1506 | INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list); | 
|  | 1507 |  | 
|  | 1508 | the_controller = fusb300; | 
|  | 1509 |  | 
|  | 1510 | fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, | 
|  | 1511 | GFP_KERNEL); | 
|  | 1512 | if (fusb300->ep0_req == NULL) | 
|  | 1513 | goto clean_up3; | 
|  | 1514 |  | 
|  | 1515 | init_controller(fusb300); | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1516 | ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget); | 
|  | 1517 | if (ret) | 
|  | 1518 | goto err_add_udc; | 
|  | 1519 |  | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1520 | dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); | 
|  | 1521 |  | 
|  | 1522 | return 0; | 
| Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1523 | err_add_udc: | 
|  | 1524 | fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); | 
| Yuan-Hsin Chen | 0fe6f1d | 2011-01-18 14:49:28 +0800 | [diff] [blame] | 1525 |  | 
|  | 1526 | clean_up3: | 
|  | 1527 | free_irq(ires->start, fusb300); | 
|  | 1528 |  | 
|  | 1529 | clean_up: | 
|  | 1530 | if (fusb300) { | 
|  | 1531 | if (fusb300->ep0_req) | 
|  | 1532 | fusb300_free_request(&fusb300->ep[0]->ep, | 
|  | 1533 | fusb300->ep0_req); | 
|  | 1534 | kfree(fusb300); | 
|  | 1535 | } | 
|  | 1536 | if (reg) | 
|  | 1537 | iounmap(reg); | 
|  | 1538 |  | 
|  | 1539 | return ret; | 
|  | 1540 | } | 
|  | 1541 |  | 
|  | 1542 | static struct platform_driver fusb300_driver = { | 
|  | 1543 | .remove =	__exit_p(fusb300_remove), | 
|  | 1544 | .driver		= { | 
|  | 1545 | .name =	(char *) udc_name, | 
|  | 1546 | .owner	= THIS_MODULE, | 
|  | 1547 | }, | 
|  | 1548 | }; | 
|  | 1549 |  | 
|  | 1550 | static int __init fusb300_udc_init(void) | 
|  | 1551 | { | 
|  | 1552 | return platform_driver_probe(&fusb300_driver, fusb300_probe); | 
|  | 1553 | } | 
|  | 1554 |  | 
|  | 1555 | module_init(fusb300_udc_init); | 
|  | 1556 |  | 
|  | 1557 | static void __exit fusb300_udc_cleanup(void) | 
|  | 1558 | { | 
|  | 1559 | platform_driver_unregister(&fusb300_driver); | 
|  | 1560 | } | 
|  | 1561 | module_exit(fusb300_udc_cleanup); |