| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * linux/drivers/char/ppdev.c | 
|  | 3 | * | 
|  | 4 | * This is the code behind /dev/parport* -- it allows a user-space | 
|  | 5 | * application to use the parport subsystem. | 
|  | 6 | * | 
|  | 7 | * Copyright (C) 1998-2000, 2002 Tim Waugh <tim@cyberelk.net> | 
|  | 8 | * | 
|  | 9 | * This program is free software; you can redistribute it and/or | 
|  | 10 | * modify it under the terms of the GNU General Public License | 
|  | 11 | * as published by the Free Software Foundation; either version | 
|  | 12 | * 2 of the License, or (at your option) any later version. | 
|  | 13 | * | 
|  | 14 | * A /dev/parportx device node represents an arbitrary device | 
|  | 15 | * on port 'x'.  The following operations are possible: | 
|  | 16 | * | 
|  | 17 | * open		do nothing, set up default IEEE 1284 protocol to be COMPAT | 
|  | 18 | * close	release port and unregister device (if necessary) | 
|  | 19 | * ioctl | 
|  | 20 | *   EXCL	register device exclusively (may fail) | 
|  | 21 | *   CLAIM	(register device first time) parport_claim_or_block | 
|  | 22 | *   RELEASE	parport_release | 
|  | 23 | *   SETMODE	set the IEEE 1284 protocol to use for read/write | 
|  | 24 | *   SETPHASE	set the IEEE 1284 phase of a particular mode.  Not to be | 
|  | 25 | *              confused with ioctl(fd, SETPHASER, &stun). ;-) | 
|  | 26 | *   DATADIR	data_forward / data_reverse | 
|  | 27 | *   WDATA	write_data | 
|  | 28 | *   RDATA	read_data | 
|  | 29 | *   WCONTROL	write_control | 
|  | 30 | *   RCONTROL	read_control | 
|  | 31 | *   FCONTROL	frob_control | 
|  | 32 | *   RSTATUS	read_status | 
|  | 33 | *   NEGOT	parport_negotiate | 
|  | 34 | *   YIELD	parport_yield_blocking | 
|  | 35 | *   WCTLONIRQ	on interrupt, set control lines | 
|  | 36 | *   CLRIRQ	clear (and return) interrupt count | 
|  | 37 | *   SETTIME	sets device timeout (struct timeval) | 
|  | 38 | *   GETTIME	gets device timeout (struct timeval) | 
|  | 39 | *   GETMODES	gets hardware supported modes (unsigned int) | 
|  | 40 | *   GETMODE	gets the current IEEE1284 mode | 
|  | 41 | *   GETPHASE   gets the current IEEE1284 phase | 
|  | 42 | *   GETFLAGS   gets current (user-visible) flags | 
|  | 43 | *   SETFLAGS   sets current (user-visible) flags | 
|  | 44 | * read/write	read or write in current IEEE 1284 protocol | 
|  | 45 | * select	wait for interrupt (in readfds) | 
|  | 46 | * | 
|  | 47 | * Changes: | 
|  | 48 | * Added SETTIME/GETTIME ioctl, Fred Barnes, 1999. | 
|  | 49 | * | 
|  | 50 | * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 2000/08/25 | 
|  | 51 | * - On error, copy_from_user and copy_to_user do not return -EFAULT, | 
|  | 52 | *   They return the positive number of bytes *not* copied due to address | 
|  | 53 | *   space errors. | 
|  | 54 | * | 
|  | 55 | * Added GETMODES/GETMODE/GETPHASE ioctls, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001. | 
|  | 56 | * Added GETFLAGS/SETFLAGS ioctls, Fred Barnes, 04/2001 | 
|  | 57 | */ | 
|  | 58 |  | 
|  | 59 | #include <linux/module.h> | 
|  | 60 | #include <linux/init.h> | 
|  | 61 | #include <linux/sched.h> | 
|  | 62 | #include <linux/device.h> | 
|  | 63 | #include <linux/devfs_fs_kernel.h> | 
|  | 64 | #include <linux/ioctl.h> | 
|  | 65 | #include <linux/parport.h> | 
|  | 66 | #include <linux/ctype.h> | 
|  | 67 | #include <linux/poll.h> | 
|  | 68 | #include <asm/uaccess.h> | 
|  | 69 | #include <linux/ppdev.h> | 
|  | 70 | #include <linux/smp_lock.h> | 
|  | 71 | #include <linux/device.h> | 
|  | 72 |  | 
|  | 73 | #define PP_VERSION "ppdev: user-space parallel port driver" | 
|  | 74 | #define CHRDEV "ppdev" | 
|  | 75 |  | 
|  | 76 | struct pp_struct { | 
|  | 77 | struct pardevice * pdev; | 
|  | 78 | wait_queue_head_t irq_wait; | 
|  | 79 | atomic_t irqc; | 
|  | 80 | unsigned int flags; | 
|  | 81 | int irqresponse; | 
|  | 82 | unsigned char irqctl; | 
|  | 83 | struct ieee1284_info state; | 
|  | 84 | struct ieee1284_info saved_state; | 
|  | 85 | long default_inactivity; | 
|  | 86 | }; | 
|  | 87 |  | 
|  | 88 | /* pp_struct.flags bitfields */ | 
|  | 89 | #define PP_CLAIMED    (1<<0) | 
|  | 90 | #define PP_EXCL       (1<<1) | 
|  | 91 |  | 
|  | 92 | /* Other constants */ | 
|  | 93 | #define PP_INTERRUPT_TIMEOUT (10 * HZ) /* 10s */ | 
|  | 94 | #define PP_BUFFER_SIZE 1024 | 
|  | 95 | #define PARDEVICE_MAX 8 | 
|  | 96 |  | 
|  | 97 | /* ROUND_UP macro from fs/select.c */ | 
|  | 98 | #define ROUND_UP(x,y) (((x)+(y)-1)/(y)) | 
|  | 99 |  | 
|  | 100 | static inline void pp_enable_irq (struct pp_struct *pp) | 
|  | 101 | { | 
|  | 102 | struct parport *port = pp->pdev->port; | 
|  | 103 | port->ops->enable_irq (port); | 
|  | 104 | } | 
|  | 105 |  | 
|  | 106 | static ssize_t pp_read (struct file * file, char __user * buf, size_t count, | 
|  | 107 | loff_t * ppos) | 
|  | 108 | { | 
|  | 109 | unsigned int minor = iminor(file->f_dentry->d_inode); | 
|  | 110 | struct pp_struct *pp = file->private_data; | 
|  | 111 | char * kbuffer; | 
|  | 112 | ssize_t bytes_read = 0; | 
|  | 113 | struct parport *pport; | 
|  | 114 | int mode; | 
|  | 115 |  | 
|  | 116 | if (!(pp->flags & PP_CLAIMED)) { | 
|  | 117 | /* Don't have the port claimed */ | 
|  | 118 | printk (KERN_DEBUG CHRDEV "%x: claim the port first\n", | 
|  | 119 | minor); | 
|  | 120 | return -EINVAL; | 
|  | 121 | } | 
|  | 122 |  | 
|  | 123 | /* Trivial case. */ | 
|  | 124 | if (count == 0) | 
|  | 125 | return 0; | 
|  | 126 |  | 
|  | 127 | kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL); | 
|  | 128 | if (!kbuffer) { | 
|  | 129 | return -ENOMEM; | 
|  | 130 | } | 
|  | 131 | pport = pp->pdev->port; | 
|  | 132 | mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR); | 
|  | 133 |  | 
|  | 134 | parport_set_timeout (pp->pdev, | 
|  | 135 | (file->f_flags & O_NONBLOCK) ? | 
|  | 136 | PARPORT_INACTIVITY_O_NONBLOCK : | 
|  | 137 | pp->default_inactivity); | 
|  | 138 |  | 
|  | 139 | while (bytes_read == 0) { | 
|  | 140 | ssize_t need = min_t(unsigned long, count, PP_BUFFER_SIZE); | 
|  | 141 |  | 
|  | 142 | if (mode == IEEE1284_MODE_EPP) { | 
|  | 143 | /* various specials for EPP mode */ | 
|  | 144 | int flags = 0; | 
|  | 145 | size_t (*fn)(struct parport *, void *, size_t, int); | 
|  | 146 |  | 
|  | 147 | if (pp->flags & PP_W91284PIC) { | 
|  | 148 | flags |= PARPORT_W91284PIC; | 
|  | 149 | } | 
|  | 150 | if (pp->flags & PP_FASTREAD) { | 
|  | 151 | flags |= PARPORT_EPP_FAST; | 
|  | 152 | } | 
|  | 153 | if (pport->ieee1284.mode & IEEE1284_ADDR) { | 
|  | 154 | fn = pport->ops->epp_read_addr; | 
|  | 155 | } else { | 
|  | 156 | fn = pport->ops->epp_read_data; | 
|  | 157 | } | 
|  | 158 | bytes_read = (*fn)(pport, kbuffer, need, flags); | 
|  | 159 | } else { | 
|  | 160 | bytes_read = parport_read (pport, kbuffer, need); | 
|  | 161 | } | 
|  | 162 |  | 
|  | 163 | if (bytes_read != 0) | 
|  | 164 | break; | 
|  | 165 |  | 
|  | 166 | if (file->f_flags & O_NONBLOCK) { | 
|  | 167 | bytes_read = -EAGAIN; | 
|  | 168 | break; | 
|  | 169 | } | 
|  | 170 |  | 
|  | 171 | if (signal_pending (current)) { | 
|  | 172 | bytes_read = -ERESTARTSYS; | 
|  | 173 | break; | 
|  | 174 | } | 
|  | 175 |  | 
|  | 176 | cond_resched(); | 
|  | 177 | } | 
|  | 178 |  | 
|  | 179 | parport_set_timeout (pp->pdev, pp->default_inactivity); | 
|  | 180 |  | 
|  | 181 | if (bytes_read > 0 && copy_to_user (buf, kbuffer, bytes_read)) | 
|  | 182 | bytes_read = -EFAULT; | 
|  | 183 |  | 
|  | 184 | kfree (kbuffer); | 
|  | 185 | pp_enable_irq (pp); | 
|  | 186 | return bytes_read; | 
|  | 187 | } | 
|  | 188 |  | 
|  | 189 | static ssize_t pp_write (struct file * file, const char __user * buf, | 
|  | 190 | size_t count, loff_t * ppos) | 
|  | 191 | { | 
|  | 192 | unsigned int minor = iminor(file->f_dentry->d_inode); | 
|  | 193 | struct pp_struct *pp = file->private_data; | 
|  | 194 | char * kbuffer; | 
|  | 195 | ssize_t bytes_written = 0; | 
|  | 196 | ssize_t wrote; | 
|  | 197 | int mode; | 
|  | 198 | struct parport *pport; | 
|  | 199 |  | 
|  | 200 | if (!(pp->flags & PP_CLAIMED)) { | 
|  | 201 | /* Don't have the port claimed */ | 
|  | 202 | printk (KERN_DEBUG CHRDEV "%x: claim the port first\n", | 
|  | 203 | minor); | 
|  | 204 | return -EINVAL; | 
|  | 205 | } | 
|  | 206 |  | 
|  | 207 | kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL); | 
|  | 208 | if (!kbuffer) { | 
|  | 209 | return -ENOMEM; | 
|  | 210 | } | 
|  | 211 | pport = pp->pdev->port; | 
|  | 212 | mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR); | 
|  | 213 |  | 
|  | 214 | parport_set_timeout (pp->pdev, | 
|  | 215 | (file->f_flags & O_NONBLOCK) ? | 
|  | 216 | PARPORT_INACTIVITY_O_NONBLOCK : | 
|  | 217 | pp->default_inactivity); | 
|  | 218 |  | 
|  | 219 | while (bytes_written < count) { | 
|  | 220 | ssize_t n = min_t(unsigned long, count - bytes_written, PP_BUFFER_SIZE); | 
|  | 221 |  | 
|  | 222 | if (copy_from_user (kbuffer, buf + bytes_written, n)) { | 
|  | 223 | bytes_written = -EFAULT; | 
|  | 224 | break; | 
|  | 225 | } | 
|  | 226 |  | 
|  | 227 | if ((pp->flags & PP_FASTWRITE) && (mode == IEEE1284_MODE_EPP)) { | 
|  | 228 | /* do a fast EPP write */ | 
|  | 229 | if (pport->ieee1284.mode & IEEE1284_ADDR) { | 
|  | 230 | wrote = pport->ops->epp_write_addr (pport, | 
|  | 231 | kbuffer, n, PARPORT_EPP_FAST); | 
|  | 232 | } else { | 
|  | 233 | wrote = pport->ops->epp_write_data (pport, | 
|  | 234 | kbuffer, n, PARPORT_EPP_FAST); | 
|  | 235 | } | 
|  | 236 | } else { | 
|  | 237 | wrote = parport_write (pp->pdev->port, kbuffer, n); | 
|  | 238 | } | 
|  | 239 |  | 
|  | 240 | if (wrote <= 0) { | 
|  | 241 | if (!bytes_written) { | 
|  | 242 | bytes_written = wrote; | 
|  | 243 | } | 
|  | 244 | break; | 
|  | 245 | } | 
|  | 246 |  | 
|  | 247 | bytes_written += wrote; | 
|  | 248 |  | 
|  | 249 | if (file->f_flags & O_NONBLOCK) { | 
|  | 250 | if (!bytes_written) | 
|  | 251 | bytes_written = -EAGAIN; | 
|  | 252 | break; | 
|  | 253 | } | 
|  | 254 |  | 
|  | 255 | if (signal_pending (current)) { | 
|  | 256 | if (!bytes_written) { | 
|  | 257 | bytes_written = -EINTR; | 
|  | 258 | } | 
|  | 259 | break; | 
|  | 260 | } | 
|  | 261 |  | 
|  | 262 | cond_resched(); | 
|  | 263 | } | 
|  | 264 |  | 
|  | 265 | parport_set_timeout (pp->pdev, pp->default_inactivity); | 
|  | 266 |  | 
|  | 267 | kfree (kbuffer); | 
|  | 268 | pp_enable_irq (pp); | 
|  | 269 | return bytes_written; | 
|  | 270 | } | 
|  | 271 |  | 
|  | 272 | static void pp_irq (int irq, void * private, struct pt_regs * unused) | 
|  | 273 | { | 
|  | 274 | struct pp_struct * pp = (struct pp_struct *) private; | 
|  | 275 |  | 
|  | 276 | if (pp->irqresponse) { | 
|  | 277 | parport_write_control (pp->pdev->port, pp->irqctl); | 
|  | 278 | pp->irqresponse = 0; | 
|  | 279 | } | 
|  | 280 |  | 
|  | 281 | atomic_inc (&pp->irqc); | 
|  | 282 | wake_up_interruptible (&pp->irq_wait); | 
|  | 283 | } | 
|  | 284 |  | 
|  | 285 | static int register_device (int minor, struct pp_struct *pp) | 
|  | 286 | { | 
|  | 287 | struct parport *port; | 
|  | 288 | struct pardevice * pdev = NULL; | 
|  | 289 | char *name; | 
|  | 290 | int fl; | 
|  | 291 |  | 
|  | 292 | name = kmalloc (strlen (CHRDEV) + 3, GFP_KERNEL); | 
|  | 293 | if (name == NULL) | 
|  | 294 | return -ENOMEM; | 
|  | 295 |  | 
|  | 296 | sprintf (name, CHRDEV "%x", minor); | 
|  | 297 |  | 
|  | 298 | port = parport_find_number (minor); | 
|  | 299 | if (!port) { | 
|  | 300 | printk (KERN_WARNING "%s: no associated port!\n", name); | 
|  | 301 | kfree (name); | 
|  | 302 | return -ENXIO; | 
|  | 303 | } | 
|  | 304 |  | 
|  | 305 | fl = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0; | 
|  | 306 | pdev = parport_register_device (port, name, NULL, | 
|  | 307 | NULL, pp_irq, fl, pp); | 
|  | 308 | parport_put_port (port); | 
|  | 309 |  | 
|  | 310 | if (!pdev) { | 
|  | 311 | printk (KERN_WARNING "%s: failed to register device!\n", name); | 
|  | 312 | kfree (name); | 
|  | 313 | return -ENXIO; | 
|  | 314 | } | 
|  | 315 |  | 
|  | 316 | pp->pdev = pdev; | 
|  | 317 | printk (KERN_DEBUG "%s: registered pardevice\n", name); | 
|  | 318 | return 0; | 
|  | 319 | } | 
|  | 320 |  | 
|  | 321 | static enum ieee1284_phase init_phase (int mode) | 
|  | 322 | { | 
|  | 323 | switch (mode & ~(IEEE1284_DEVICEID | 
|  | 324 | | IEEE1284_ADDR)) { | 
|  | 325 | case IEEE1284_MODE_NIBBLE: | 
|  | 326 | case IEEE1284_MODE_BYTE: | 
|  | 327 | return IEEE1284_PH_REV_IDLE; | 
|  | 328 | } | 
|  | 329 | return IEEE1284_PH_FWD_IDLE; | 
|  | 330 | } | 
|  | 331 |  | 
|  | 332 | static int pp_ioctl(struct inode *inode, struct file *file, | 
|  | 333 | unsigned int cmd, unsigned long arg) | 
|  | 334 | { | 
|  | 335 | unsigned int minor = iminor(inode); | 
|  | 336 | struct pp_struct *pp = file->private_data; | 
|  | 337 | struct parport * port; | 
|  | 338 | void __user *argp = (void __user *)arg; | 
|  | 339 |  | 
|  | 340 | /* First handle the cases that don't take arguments. */ | 
|  | 341 | switch (cmd) { | 
|  | 342 | case PPCLAIM: | 
|  | 343 | { | 
|  | 344 | struct ieee1284_info *info; | 
|  | 345 | int ret; | 
|  | 346 |  | 
|  | 347 | if (pp->flags & PP_CLAIMED) { | 
|  | 348 | printk (KERN_DEBUG CHRDEV | 
|  | 349 | "%x: you've already got it!\n", minor); | 
|  | 350 | return -EINVAL; | 
|  | 351 | } | 
|  | 352 |  | 
|  | 353 | /* Deferred device registration. */ | 
|  | 354 | if (!pp->pdev) { | 
|  | 355 | int err = register_device (minor, pp); | 
|  | 356 | if (err) { | 
|  | 357 | return err; | 
|  | 358 | } | 
|  | 359 | } | 
|  | 360 |  | 
|  | 361 | ret = parport_claim_or_block (pp->pdev); | 
|  | 362 | if (ret < 0) | 
|  | 363 | return ret; | 
|  | 364 |  | 
|  | 365 | pp->flags |= PP_CLAIMED; | 
|  | 366 |  | 
|  | 367 | /* For interrupt-reporting to work, we need to be | 
|  | 368 | * informed of each interrupt. */ | 
|  | 369 | pp_enable_irq (pp); | 
|  | 370 |  | 
|  | 371 | /* We may need to fix up the state machine. */ | 
|  | 372 | info = &pp->pdev->port->ieee1284; | 
|  | 373 | pp->saved_state.mode = info->mode; | 
|  | 374 | pp->saved_state.phase = info->phase; | 
|  | 375 | info->mode = pp->state.mode; | 
|  | 376 | info->phase = pp->state.phase; | 
|  | 377 | pp->default_inactivity = parport_set_timeout (pp->pdev, 0); | 
|  | 378 | parport_set_timeout (pp->pdev, pp->default_inactivity); | 
|  | 379 |  | 
|  | 380 | return 0; | 
|  | 381 | } | 
|  | 382 | case PPEXCL: | 
|  | 383 | if (pp->pdev) { | 
|  | 384 | printk (KERN_DEBUG CHRDEV "%x: too late for PPEXCL; " | 
|  | 385 | "already registered\n", minor); | 
|  | 386 | if (pp->flags & PP_EXCL) | 
|  | 387 | /* But it's not really an error. */ | 
|  | 388 | return 0; | 
|  | 389 | /* There's no chance of making the driver happy. */ | 
|  | 390 | return -EINVAL; | 
|  | 391 | } | 
|  | 392 |  | 
|  | 393 | /* Just remember to register the device exclusively | 
|  | 394 | * when we finally do the registration. */ | 
|  | 395 | pp->flags |= PP_EXCL; | 
|  | 396 | return 0; | 
|  | 397 | case PPSETMODE: | 
|  | 398 | { | 
|  | 399 | int mode; | 
|  | 400 | if (copy_from_user (&mode, argp, sizeof (mode))) | 
|  | 401 | return -EFAULT; | 
|  | 402 | /* FIXME: validate mode */ | 
|  | 403 | pp->state.mode = mode; | 
|  | 404 | pp->state.phase = init_phase (mode); | 
|  | 405 |  | 
|  | 406 | if (pp->flags & PP_CLAIMED) { | 
|  | 407 | pp->pdev->port->ieee1284.mode = mode; | 
|  | 408 | pp->pdev->port->ieee1284.phase = pp->state.phase; | 
|  | 409 | } | 
|  | 410 |  | 
|  | 411 | return 0; | 
|  | 412 | } | 
|  | 413 | case PPGETMODE: | 
|  | 414 | { | 
|  | 415 | int mode; | 
|  | 416 |  | 
|  | 417 | if (pp->flags & PP_CLAIMED) { | 
|  | 418 | mode = pp->pdev->port->ieee1284.mode; | 
|  | 419 | } else { | 
|  | 420 | mode = pp->state.mode; | 
|  | 421 | } | 
|  | 422 | if (copy_to_user (argp, &mode, sizeof (mode))) { | 
|  | 423 | return -EFAULT; | 
|  | 424 | } | 
|  | 425 | return 0; | 
|  | 426 | } | 
|  | 427 | case PPSETPHASE: | 
|  | 428 | { | 
|  | 429 | int phase; | 
|  | 430 | if (copy_from_user (&phase, argp, sizeof (phase))) { | 
|  | 431 | return -EFAULT; | 
|  | 432 | } | 
|  | 433 | /* FIXME: validate phase */ | 
|  | 434 | pp->state.phase = phase; | 
|  | 435 |  | 
|  | 436 | if (pp->flags & PP_CLAIMED) { | 
|  | 437 | pp->pdev->port->ieee1284.phase = phase; | 
|  | 438 | } | 
|  | 439 |  | 
|  | 440 | return 0; | 
|  | 441 | } | 
|  | 442 | case PPGETPHASE: | 
|  | 443 | { | 
|  | 444 | int phase; | 
|  | 445 |  | 
|  | 446 | if (pp->flags & PP_CLAIMED) { | 
|  | 447 | phase = pp->pdev->port->ieee1284.phase; | 
|  | 448 | } else { | 
|  | 449 | phase = pp->state.phase; | 
|  | 450 | } | 
|  | 451 | if (copy_to_user (argp, &phase, sizeof (phase))) { | 
|  | 452 | return -EFAULT; | 
|  | 453 | } | 
|  | 454 | return 0; | 
|  | 455 | } | 
|  | 456 | case PPGETMODES: | 
|  | 457 | { | 
|  | 458 | unsigned int modes; | 
|  | 459 |  | 
|  | 460 | port = parport_find_number (minor); | 
|  | 461 | if (!port) | 
|  | 462 | return -ENODEV; | 
|  | 463 |  | 
|  | 464 | modes = port->modes; | 
|  | 465 | if (copy_to_user (argp, &modes, sizeof (modes))) { | 
|  | 466 | return -EFAULT; | 
|  | 467 | } | 
|  | 468 | return 0; | 
|  | 469 | } | 
|  | 470 | case PPSETFLAGS: | 
|  | 471 | { | 
|  | 472 | int uflags; | 
|  | 473 |  | 
|  | 474 | if (copy_from_user (&uflags, argp, sizeof (uflags))) { | 
|  | 475 | return -EFAULT; | 
|  | 476 | } | 
|  | 477 | pp->flags &= ~PP_FLAGMASK; | 
|  | 478 | pp->flags |= (uflags & PP_FLAGMASK); | 
|  | 479 | return 0; | 
|  | 480 | } | 
|  | 481 | case PPGETFLAGS: | 
|  | 482 | { | 
|  | 483 | int uflags; | 
|  | 484 |  | 
|  | 485 | uflags = pp->flags & PP_FLAGMASK; | 
|  | 486 | if (copy_to_user (argp, &uflags, sizeof (uflags))) { | 
|  | 487 | return -EFAULT; | 
|  | 488 | } | 
|  | 489 | return 0; | 
|  | 490 | } | 
|  | 491 | }	/* end switch() */ | 
|  | 492 |  | 
|  | 493 | /* Everything else requires the port to be claimed, so check | 
|  | 494 | * that now. */ | 
|  | 495 | if ((pp->flags & PP_CLAIMED) == 0) { | 
|  | 496 | printk (KERN_DEBUG CHRDEV "%x: claim the port first\n", | 
|  | 497 | minor); | 
|  | 498 | return -EINVAL; | 
|  | 499 | } | 
|  | 500 |  | 
|  | 501 | port = pp->pdev->port; | 
|  | 502 | switch (cmd) { | 
|  | 503 | struct ieee1284_info *info; | 
|  | 504 | unsigned char reg; | 
|  | 505 | unsigned char mask; | 
|  | 506 | int mode; | 
|  | 507 | int ret; | 
|  | 508 | struct timeval par_timeout; | 
|  | 509 | long to_jiffies; | 
|  | 510 |  | 
|  | 511 | case PPRSTATUS: | 
|  | 512 | reg = parport_read_status (port); | 
|  | 513 | if (copy_to_user (argp, ®, sizeof (reg))) | 
|  | 514 | return -EFAULT; | 
|  | 515 | return 0; | 
|  | 516 | case PPRDATA: | 
|  | 517 | reg = parport_read_data (port); | 
|  | 518 | if (copy_to_user (argp, ®, sizeof (reg))) | 
|  | 519 | return -EFAULT; | 
|  | 520 | return 0; | 
|  | 521 | case PPRCONTROL: | 
|  | 522 | reg = parport_read_control (port); | 
|  | 523 | if (copy_to_user (argp, ®, sizeof (reg))) | 
|  | 524 | return -EFAULT; | 
|  | 525 | return 0; | 
|  | 526 | case PPYIELD: | 
|  | 527 | parport_yield_blocking (pp->pdev); | 
|  | 528 | return 0; | 
|  | 529 |  | 
|  | 530 | case PPRELEASE: | 
|  | 531 | /* Save the state machine's state. */ | 
|  | 532 | info = &pp->pdev->port->ieee1284; | 
|  | 533 | pp->state.mode = info->mode; | 
|  | 534 | pp->state.phase = info->phase; | 
|  | 535 | info->mode = pp->saved_state.mode; | 
|  | 536 | info->phase = pp->saved_state.phase; | 
|  | 537 | parport_release (pp->pdev); | 
|  | 538 | pp->flags &= ~PP_CLAIMED; | 
|  | 539 | return 0; | 
|  | 540 |  | 
|  | 541 | case PPWCONTROL: | 
|  | 542 | if (copy_from_user (®, argp, sizeof (reg))) | 
|  | 543 | return -EFAULT; | 
|  | 544 | parport_write_control (port, reg); | 
|  | 545 | return 0; | 
|  | 546 |  | 
|  | 547 | case PPWDATA: | 
|  | 548 | if (copy_from_user (®, argp, sizeof (reg))) | 
|  | 549 | return -EFAULT; | 
|  | 550 | parport_write_data (port, reg); | 
|  | 551 | return 0; | 
|  | 552 |  | 
|  | 553 | case PPFCONTROL: | 
|  | 554 | if (copy_from_user (&mask, argp, | 
|  | 555 | sizeof (mask))) | 
|  | 556 | return -EFAULT; | 
|  | 557 | if (copy_from_user (®, 1 + (unsigned char __user *) arg, | 
|  | 558 | sizeof (reg))) | 
|  | 559 | return -EFAULT; | 
|  | 560 | parport_frob_control (port, mask, reg); | 
|  | 561 | return 0; | 
|  | 562 |  | 
|  | 563 | case PPDATADIR: | 
|  | 564 | if (copy_from_user (&mode, argp, sizeof (mode))) | 
|  | 565 | return -EFAULT; | 
|  | 566 | if (mode) | 
|  | 567 | port->ops->data_reverse (port); | 
|  | 568 | else | 
|  | 569 | port->ops->data_forward (port); | 
|  | 570 | return 0; | 
|  | 571 |  | 
|  | 572 | case PPNEGOT: | 
|  | 573 | if (copy_from_user (&mode, argp, sizeof (mode))) | 
|  | 574 | return -EFAULT; | 
|  | 575 | switch ((ret = parport_negotiate (port, mode))) { | 
|  | 576 | case 0: break; | 
|  | 577 | case -1: /* handshake failed, peripheral not IEEE 1284 */ | 
|  | 578 | ret = -EIO; | 
|  | 579 | break; | 
|  | 580 | case 1:  /* handshake succeeded, peripheral rejected mode */ | 
|  | 581 | ret = -ENXIO; | 
|  | 582 | break; | 
|  | 583 | } | 
|  | 584 | pp_enable_irq (pp); | 
|  | 585 | return ret; | 
|  | 586 |  | 
|  | 587 | case PPWCTLONIRQ: | 
|  | 588 | if (copy_from_user (®, argp, sizeof (reg))) | 
|  | 589 | return -EFAULT; | 
|  | 590 |  | 
|  | 591 | /* Remember what to set the control lines to, for next | 
|  | 592 | * time we get an interrupt. */ | 
|  | 593 | pp->irqctl = reg; | 
|  | 594 | pp->irqresponse = 1; | 
|  | 595 | return 0; | 
|  | 596 |  | 
|  | 597 | case PPCLRIRQ: | 
|  | 598 | ret = atomic_read (&pp->irqc); | 
|  | 599 | if (copy_to_user (argp, &ret, sizeof (ret))) | 
|  | 600 | return -EFAULT; | 
|  | 601 | atomic_sub (ret, &pp->irqc); | 
|  | 602 | return 0; | 
|  | 603 |  | 
|  | 604 | case PPSETTIME: | 
|  | 605 | if (copy_from_user (&par_timeout, argp, sizeof(struct timeval))) { | 
|  | 606 | return -EFAULT; | 
|  | 607 | } | 
|  | 608 | /* Convert to jiffies, place in pp->pdev->timeout */ | 
|  | 609 | if ((par_timeout.tv_sec < 0) || (par_timeout.tv_usec < 0)) { | 
|  | 610 | return -EINVAL; | 
|  | 611 | } | 
|  | 612 | to_jiffies = ROUND_UP(par_timeout.tv_usec, 1000000/HZ); | 
|  | 613 | to_jiffies += par_timeout.tv_sec * (long)HZ; | 
|  | 614 | if (to_jiffies <= 0) { | 
|  | 615 | return -EINVAL; | 
|  | 616 | } | 
|  | 617 | pp->pdev->timeout = to_jiffies; | 
|  | 618 | return 0; | 
|  | 619 |  | 
|  | 620 | case PPGETTIME: | 
|  | 621 | to_jiffies = pp->pdev->timeout; | 
|  | 622 | par_timeout.tv_sec = to_jiffies / HZ; | 
|  | 623 | par_timeout.tv_usec = (to_jiffies % (long)HZ) * (1000000/HZ); | 
|  | 624 | if (copy_to_user (argp, &par_timeout, sizeof(struct timeval))) | 
|  | 625 | return -EFAULT; | 
|  | 626 | return 0; | 
|  | 627 |  | 
|  | 628 | default: | 
|  | 629 | printk (KERN_DEBUG CHRDEV "%x: What? (cmd=0x%x)\n", minor, | 
|  | 630 | cmd); | 
|  | 631 | return -EINVAL; | 
|  | 632 | } | 
|  | 633 |  | 
|  | 634 | /* Keep the compiler happy */ | 
|  | 635 | return 0; | 
|  | 636 | } | 
|  | 637 |  | 
|  | 638 | static int pp_open (struct inode * inode, struct file * file) | 
|  | 639 | { | 
|  | 640 | unsigned int minor = iminor(inode); | 
|  | 641 | struct pp_struct *pp; | 
|  | 642 |  | 
|  | 643 | if (minor >= PARPORT_MAX) | 
|  | 644 | return -ENXIO; | 
|  | 645 |  | 
|  | 646 | pp = kmalloc (sizeof (struct pp_struct), GFP_KERNEL); | 
|  | 647 | if (!pp) | 
|  | 648 | return -ENOMEM; | 
|  | 649 |  | 
|  | 650 | pp->state.mode = IEEE1284_MODE_COMPAT; | 
|  | 651 | pp->state.phase = init_phase (pp->state.mode); | 
|  | 652 | pp->flags = 0; | 
|  | 653 | pp->irqresponse = 0; | 
|  | 654 | atomic_set (&pp->irqc, 0); | 
|  | 655 | init_waitqueue_head (&pp->irq_wait); | 
|  | 656 |  | 
|  | 657 | /* Defer the actual device registration until the first claim. | 
|  | 658 | * That way, we know whether or not the driver wants to have | 
|  | 659 | * exclusive access to the port (PPEXCL). | 
|  | 660 | */ | 
|  | 661 | pp->pdev = NULL; | 
|  | 662 | file->private_data = pp; | 
|  | 663 |  | 
|  | 664 | return 0; | 
|  | 665 | } | 
|  | 666 |  | 
|  | 667 | static int pp_release (struct inode * inode, struct file * file) | 
|  | 668 | { | 
|  | 669 | unsigned int minor = iminor(inode); | 
|  | 670 | struct pp_struct *pp = file->private_data; | 
|  | 671 | int compat_negot; | 
|  | 672 |  | 
|  | 673 | compat_negot = 0; | 
|  | 674 | if (!(pp->flags & PP_CLAIMED) && pp->pdev && | 
|  | 675 | (pp->state.mode != IEEE1284_MODE_COMPAT)) { | 
|  | 676 | struct ieee1284_info *info; | 
|  | 677 |  | 
|  | 678 | /* parport released, but not in compatibility mode */ | 
|  | 679 | parport_claim_or_block (pp->pdev); | 
|  | 680 | pp->flags |= PP_CLAIMED; | 
|  | 681 | info = &pp->pdev->port->ieee1284; | 
|  | 682 | pp->saved_state.mode = info->mode; | 
|  | 683 | pp->saved_state.phase = info->phase; | 
|  | 684 | info->mode = pp->state.mode; | 
|  | 685 | info->phase = pp->state.phase; | 
|  | 686 | compat_negot = 1; | 
|  | 687 | } else if ((pp->flags & PP_CLAIMED) && pp->pdev && | 
|  | 688 | (pp->pdev->port->ieee1284.mode != IEEE1284_MODE_COMPAT)) { | 
|  | 689 | compat_negot = 2; | 
|  | 690 | } | 
|  | 691 | if (compat_negot) { | 
|  | 692 | parport_negotiate (pp->pdev->port, IEEE1284_MODE_COMPAT); | 
|  | 693 | printk (KERN_DEBUG CHRDEV | 
|  | 694 | "%x: negotiated back to compatibility mode because " | 
|  | 695 | "user-space forgot\n", minor); | 
|  | 696 | } | 
|  | 697 |  | 
|  | 698 | if (pp->flags & PP_CLAIMED) { | 
|  | 699 | struct ieee1284_info *info; | 
|  | 700 |  | 
|  | 701 | info = &pp->pdev->port->ieee1284; | 
|  | 702 | pp->state.mode = info->mode; | 
|  | 703 | pp->state.phase = info->phase; | 
|  | 704 | info->mode = pp->saved_state.mode; | 
|  | 705 | info->phase = pp->saved_state.phase; | 
|  | 706 | parport_release (pp->pdev); | 
|  | 707 | if (compat_negot != 1) { | 
|  | 708 | printk (KERN_DEBUG CHRDEV "%x: released pardevice " | 
|  | 709 | "because user-space forgot\n", minor); | 
|  | 710 | } | 
|  | 711 | } | 
|  | 712 |  | 
|  | 713 | if (pp->pdev) { | 
|  | 714 | const char *name = pp->pdev->name; | 
|  | 715 | parport_unregister_device (pp->pdev); | 
|  | 716 | kfree (name); | 
|  | 717 | pp->pdev = NULL; | 
|  | 718 | printk (KERN_DEBUG CHRDEV "%x: unregistered pardevice\n", | 
|  | 719 | minor); | 
|  | 720 | } | 
|  | 721 |  | 
|  | 722 | kfree (pp); | 
|  | 723 |  | 
|  | 724 | return 0; | 
|  | 725 | } | 
|  | 726 |  | 
|  | 727 | /* No kernel lock held - fine */ | 
|  | 728 | static unsigned int pp_poll (struct file * file, poll_table * wait) | 
|  | 729 | { | 
|  | 730 | struct pp_struct *pp = file->private_data; | 
|  | 731 | unsigned int mask = 0; | 
|  | 732 |  | 
|  | 733 | poll_wait (file, &pp->irq_wait, wait); | 
|  | 734 | if (atomic_read (&pp->irqc)) | 
|  | 735 | mask |= POLLIN | POLLRDNORM; | 
|  | 736 |  | 
|  | 737 | return mask; | 
|  | 738 | } | 
|  | 739 |  | 
| gregkh@suse.de | ca8eca6 | 2005-03-23 09:53:09 -0800 | [diff] [blame] | 740 | static struct class *ppdev_class; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 741 |  | 
|  | 742 | static struct file_operations pp_fops = { | 
|  | 743 | .owner		= THIS_MODULE, | 
|  | 744 | .llseek		= no_llseek, | 
|  | 745 | .read		= pp_read, | 
|  | 746 | .write		= pp_write, | 
|  | 747 | .poll		= pp_poll, | 
|  | 748 | .ioctl		= pp_ioctl, | 
|  | 749 | .open		= pp_open, | 
|  | 750 | .release	= pp_release, | 
|  | 751 | }; | 
|  | 752 |  | 
|  | 753 | static void pp_attach(struct parport *port) | 
|  | 754 | { | 
| Greg Kroah-Hartman | 53f4654 | 2005-10-27 22:25:43 -0700 | [diff] [blame] | 755 | class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 756 | NULL, "parport%d", port->number); | 
|  | 757 | } | 
|  | 758 |  | 
|  | 759 | static void pp_detach(struct parport *port) | 
|  | 760 | { | 
| gregkh@suse.de | ca8eca6 | 2005-03-23 09:53:09 -0800 | [diff] [blame] | 761 | class_device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 762 | } | 
|  | 763 |  | 
|  | 764 | static struct parport_driver pp_driver = { | 
|  | 765 | .name		= CHRDEV, | 
|  | 766 | .attach		= pp_attach, | 
|  | 767 | .detach		= pp_detach, | 
|  | 768 | }; | 
|  | 769 |  | 
|  | 770 | static int __init ppdev_init (void) | 
|  | 771 | { | 
|  | 772 | int i, err = 0; | 
|  | 773 |  | 
|  | 774 | if (register_chrdev (PP_MAJOR, CHRDEV, &pp_fops)) { | 
|  | 775 | printk (KERN_WARNING CHRDEV ": unable to get major %d\n", | 
|  | 776 | PP_MAJOR); | 
|  | 777 | return -EIO; | 
|  | 778 | } | 
| gregkh@suse.de | ca8eca6 | 2005-03-23 09:53:09 -0800 | [diff] [blame] | 779 | ppdev_class = class_create(THIS_MODULE, CHRDEV); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 780 | if (IS_ERR(ppdev_class)) { | 
|  | 781 | err = PTR_ERR(ppdev_class); | 
|  | 782 | goto out_chrdev; | 
|  | 783 | } | 
|  | 784 | devfs_mk_dir("parports"); | 
|  | 785 | for (i = 0; i < PARPORT_MAX; i++) { | 
|  | 786 | devfs_mk_cdev(MKDEV(PP_MAJOR, i), | 
|  | 787 | S_IFCHR | S_IRUGO | S_IWUGO, "parports/%d", i); | 
|  | 788 | } | 
|  | 789 | if (parport_register_driver(&pp_driver)) { | 
|  | 790 | printk (KERN_WARNING CHRDEV ": unable to register with parport\n"); | 
|  | 791 | goto out_class; | 
|  | 792 | } | 
|  | 793 |  | 
|  | 794 | printk (KERN_INFO PP_VERSION "\n"); | 
|  | 795 | goto out; | 
|  | 796 |  | 
|  | 797 | out_class: | 
|  | 798 | for (i = 0; i < PARPORT_MAX; i++) | 
|  | 799 | devfs_remove("parports/%d", i); | 
|  | 800 | devfs_remove("parports"); | 
| gregkh@suse.de | ca8eca6 | 2005-03-23 09:53:09 -0800 | [diff] [blame] | 801 | class_destroy(ppdev_class); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 802 | out_chrdev: | 
|  | 803 | unregister_chrdev(PP_MAJOR, CHRDEV); | 
|  | 804 | out: | 
|  | 805 | return err; | 
|  | 806 | } | 
|  | 807 |  | 
|  | 808 | static void __exit ppdev_cleanup (void) | 
|  | 809 | { | 
|  | 810 | int i; | 
|  | 811 | /* Clean up all parport stuff */ | 
|  | 812 | for (i = 0; i < PARPORT_MAX; i++) | 
|  | 813 | devfs_remove("parports/%d", i); | 
|  | 814 | parport_unregister_driver(&pp_driver); | 
|  | 815 | devfs_remove("parports"); | 
| gregkh@suse.de | ca8eca6 | 2005-03-23 09:53:09 -0800 | [diff] [blame] | 816 | class_destroy(ppdev_class); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 817 | unregister_chrdev (PP_MAJOR, CHRDEV); | 
|  | 818 | } | 
|  | 819 |  | 
|  | 820 | module_init(ppdev_init); | 
|  | 821 | module_exit(ppdev_cleanup); | 
|  | 822 |  | 
|  | 823 | MODULE_LICENSE("GPL"); | 
|  | 824 | MODULE_ALIAS_CHARDEV_MAJOR(PP_MAJOR); |