| Virupax Sadashivpetimath | 0af62f4 | 2010-05-26 14:42:14 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * Copyright (C) ST-Ericsson SA 2010 | 
 | 3 |  * | 
 | 4 |  * License terms: GNU General Public License (GPL) version 2 | 
 | 5 |  * Author: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> | 
 | 6 |  * | 
 | 7 |  * RTC clock driver for the RTC part of the AB8500 Power management chip. | 
 | 8 |  * Based on RTC clock driver for the AB3100 Analog Baseband Chip by | 
 | 9 |  * Linus Walleij <linus.walleij@stericsson.com> | 
 | 10 |  */ | 
 | 11 |  | 
 | 12 | #include <linux/module.h> | 
 | 13 | #include <linux/kernel.h> | 
 | 14 | #include <linux/init.h> | 
 | 15 | #include <linux/platform_device.h> | 
 | 16 | #include <linux/rtc.h> | 
 | 17 | #include <linux/mfd/ab8500.h> | 
 | 18 | #include <linux/delay.h> | 
 | 19 |  | 
 | 20 | #define AB8500_RTC_SOFF_STAT_REG	0x0F00 | 
 | 21 | #define AB8500_RTC_CC_CONF_REG		0x0F01 | 
 | 22 | #define AB8500_RTC_READ_REQ_REG		0x0F02 | 
 | 23 | #define AB8500_RTC_WATCH_TSECMID_REG	0x0F03 | 
 | 24 | #define AB8500_RTC_WATCH_TSECHI_REG	0x0F04 | 
 | 25 | #define AB8500_RTC_WATCH_TMIN_LOW_REG	0x0F05 | 
 | 26 | #define AB8500_RTC_WATCH_TMIN_MID_REG	0x0F06 | 
 | 27 | #define AB8500_RTC_WATCH_TMIN_HI_REG	0x0F07 | 
 | 28 | #define AB8500_RTC_ALRM_MIN_LOW_REG	0x0F08 | 
 | 29 | #define AB8500_RTC_ALRM_MIN_MID_REG	0x0F09 | 
 | 30 | #define AB8500_RTC_ALRM_MIN_HI_REG	0x0F0A | 
 | 31 | #define AB8500_RTC_STAT_REG		0x0F0B | 
 | 32 | #define AB8500_RTC_BKUP_CHG_REG		0x0F0C | 
 | 33 | #define AB8500_RTC_FORCE_BKUP_REG	0x0F0D | 
 | 34 | #define AB8500_RTC_CALIB_REG		0x0F0E | 
 | 35 | #define AB8500_RTC_SWITCH_STAT_REG	0x0F0F | 
 | 36 | #define AB8500_REV_REG			0x1080 | 
 | 37 |  | 
 | 38 | /* RtcReadRequest bits */ | 
 | 39 | #define RTC_READ_REQUEST		0x01 | 
 | 40 | #define RTC_WRITE_REQUEST		0x02 | 
 | 41 |  | 
 | 42 | /* RtcCtrl bits */ | 
 | 43 | #define RTC_ALARM_ENA			0x04 | 
 | 44 | #define RTC_STATUS_DATA			0x01 | 
 | 45 |  | 
 | 46 | #define COUNTS_PER_SEC			(0xF000 / 60) | 
 | 47 | #define AB8500_RTC_EPOCH		2000 | 
 | 48 |  | 
 | 49 | static const unsigned long ab8500_rtc_time_regs[] = { | 
 | 50 | 	AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG, | 
 | 51 | 	AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG, | 
 | 52 | 	AB8500_RTC_WATCH_TSECMID_REG | 
 | 53 | }; | 
 | 54 |  | 
 | 55 | static const unsigned long ab8500_rtc_alarm_regs[] = { | 
 | 56 | 	AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG, | 
 | 57 | 	AB8500_RTC_ALRM_MIN_LOW_REG | 
 | 58 | }; | 
 | 59 |  | 
 | 60 | /* Calculate the seconds from 1970 to 01-01-2000 00:00:00 */ | 
 | 61 | static unsigned long get_elapsed_seconds(int year) | 
 | 62 | { | 
 | 63 | 	unsigned long secs; | 
 | 64 | 	struct rtc_time tm = { | 
 | 65 | 		.tm_year = year - 1900, | 
 | 66 | 		.tm_mday = 1, | 
 | 67 | 	}; | 
 | 68 |  | 
 | 69 | 	/* | 
 | 70 | 	 * This function calculates secs from 1970 and not from | 
 | 71 | 	 * 1900, even if we supply the offset from year 1900. | 
 | 72 | 	 */ | 
 | 73 | 	rtc_tm_to_time(&tm, &secs); | 
 | 74 | 	return secs; | 
 | 75 | } | 
 | 76 |  | 
 | 77 | static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
 | 78 | { | 
 | 79 | 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); | 
 | 80 | 	unsigned long timeout = jiffies + HZ; | 
 | 81 | 	int retval, i; | 
 | 82 | 	unsigned long mins, secs; | 
 | 83 | 	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)]; | 
 | 84 |  | 
 | 85 | 	/* Request a data read */ | 
 | 86 | 	retval = ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, | 
 | 87 | 			      RTC_READ_REQUEST); | 
 | 88 | 	if (retval < 0) | 
 | 89 | 		return retval; | 
 | 90 |  | 
 | 91 | 	/* Early AB8500 chips will not clear the rtc read request bit */ | 
 | 92 | 	if (ab8500->revision == 0) { | 
 | 93 | 		msleep(1); | 
 | 94 | 	} else { | 
 | 95 | 		/* Wait for some cycles after enabling the rtc read in ab8500 */ | 
 | 96 | 		while (time_before(jiffies, timeout)) { | 
 | 97 | 			retval = ab8500_read(ab8500, AB8500_RTC_READ_REQ_REG); | 
 | 98 | 			if (retval < 0) | 
 | 99 | 				return retval; | 
 | 100 |  | 
 | 101 | 			if (!(retval & RTC_READ_REQUEST)) | 
 | 102 | 				break; | 
 | 103 |  | 
 | 104 | 			msleep(1); | 
 | 105 | 		} | 
 | 106 | 	} | 
 | 107 |  | 
 | 108 | 	/* Read the Watchtime registers */ | 
 | 109 | 	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) { | 
 | 110 | 		retval = ab8500_read(ab8500, ab8500_rtc_time_regs[i]); | 
 | 111 | 		if (retval < 0) | 
 | 112 | 			return retval; | 
 | 113 | 		buf[i] = retval; | 
 | 114 | 	} | 
 | 115 |  | 
 | 116 | 	mins = (buf[0] << 16) | (buf[1] << 8) | buf[2]; | 
 | 117 |  | 
 | 118 | 	secs =	(buf[3] << 8) | buf[4]; | 
 | 119 | 	secs =	secs / COUNTS_PER_SEC; | 
 | 120 | 	secs =	secs + (mins * 60); | 
 | 121 |  | 
 | 122 | 	/* Add back the initially subtracted number of seconds */ | 
 | 123 | 	secs += get_elapsed_seconds(AB8500_RTC_EPOCH); | 
 | 124 |  | 
 | 125 | 	rtc_time_to_tm(secs, tm); | 
 | 126 | 	return rtc_valid_tm(tm); | 
 | 127 | } | 
 | 128 |  | 
 | 129 | static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
 | 130 | { | 
 | 131 | 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); | 
 | 132 | 	int retval, i; | 
 | 133 | 	unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)]; | 
 | 134 | 	unsigned long no_secs, no_mins, secs = 0; | 
 | 135 |  | 
 | 136 | 	if (tm->tm_year < (AB8500_RTC_EPOCH - 1900)) { | 
 | 137 | 		dev_dbg(dev, "year should be equal to or greater than %d\n", | 
 | 138 | 				AB8500_RTC_EPOCH); | 
 | 139 | 		return -EINVAL; | 
 | 140 | 	} | 
 | 141 |  | 
 | 142 | 	/* Get the number of seconds since 1970 */ | 
 | 143 | 	rtc_tm_to_time(tm, &secs); | 
 | 144 |  | 
 | 145 | 	/* | 
 | 146 | 	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since | 
 | 147 | 	 * we only have a small counter in the RTC. | 
 | 148 | 	 */ | 
 | 149 | 	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH); | 
 | 150 |  | 
 | 151 | 	no_mins = secs / 60; | 
 | 152 |  | 
 | 153 | 	no_secs = secs % 60; | 
 | 154 | 	/* Make the seconds count as per the RTC resolution */ | 
 | 155 | 	no_secs = no_secs * COUNTS_PER_SEC; | 
 | 156 |  | 
 | 157 | 	buf[4] = no_secs & 0xFF; | 
 | 158 | 	buf[3] = (no_secs >> 8) & 0xFF; | 
 | 159 |  | 
 | 160 | 	buf[2] = no_mins & 0xFF; | 
 | 161 | 	buf[1] = (no_mins >> 8) & 0xFF; | 
 | 162 | 	buf[0] = (no_mins >> 16) & 0xFF; | 
 | 163 |  | 
 | 164 | 	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) { | 
 | 165 | 		retval = ab8500_write(ab8500, ab8500_rtc_time_regs[i], buf[i]); | 
 | 166 | 		if (retval < 0) | 
 | 167 | 			return retval; | 
 | 168 | 	} | 
 | 169 |  | 
 | 170 | 	/* Request a data write */ | 
 | 171 | 	return ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST); | 
 | 172 | } | 
 | 173 |  | 
 | 174 | static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) | 
 | 175 | { | 
 | 176 | 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); | 
 | 177 | 	int retval, i; | 
 | 178 | 	int rtc_ctrl; | 
 | 179 | 	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)]; | 
 | 180 | 	unsigned long secs, mins; | 
 | 181 |  | 
 | 182 | 	/* Check if the alarm is enabled or not */ | 
 | 183 | 	rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG); | 
 | 184 | 	if (rtc_ctrl < 0) | 
 | 185 | 		return rtc_ctrl; | 
 | 186 |  | 
 | 187 | 	if (rtc_ctrl & RTC_ALARM_ENA) | 
 | 188 | 		alarm->enabled = 1; | 
 | 189 | 	else | 
 | 190 | 		alarm->enabled = 0; | 
 | 191 |  | 
 | 192 | 	alarm->pending = 0; | 
 | 193 |  | 
 | 194 | 	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) { | 
 | 195 | 		retval = ab8500_read(ab8500, ab8500_rtc_alarm_regs[i]); | 
 | 196 | 		if (retval < 0) | 
 | 197 | 			return retval; | 
 | 198 | 		buf[i] = retval; | 
 | 199 | 	} | 
 | 200 |  | 
 | 201 | 	mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]); | 
 | 202 | 	secs = mins * 60; | 
 | 203 |  | 
 | 204 | 	/* Add back the initially subtracted number of seconds */ | 
 | 205 | 	secs += get_elapsed_seconds(AB8500_RTC_EPOCH); | 
 | 206 |  | 
 | 207 | 	rtc_time_to_tm(secs, &alarm->time); | 
 | 208 |  | 
 | 209 | 	return rtc_valid_tm(&alarm->time); | 
 | 210 | } | 
 | 211 |  | 
 | 212 | static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled) | 
 | 213 | { | 
 | 214 | 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); | 
 | 215 |  | 
 | 216 | 	return ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_ALARM_ENA, | 
 | 217 | 			       enabled ? RTC_ALARM_ENA : 0); | 
 | 218 | } | 
 | 219 |  | 
 | 220 | static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) | 
 | 221 | { | 
 | 222 | 	struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); | 
 | 223 | 	int retval, i; | 
 | 224 | 	unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)]; | 
 | 225 | 	unsigned long mins, secs = 0; | 
 | 226 |  | 
 | 227 | 	if (alarm->time.tm_year < (AB8500_RTC_EPOCH - 1900)) { | 
 | 228 | 		dev_dbg(dev, "year should be equal to or greater than %d\n", | 
 | 229 | 				AB8500_RTC_EPOCH); | 
 | 230 | 		return -EINVAL; | 
 | 231 | 	} | 
 | 232 |  | 
 | 233 | 	/* Get the number of seconds since 1970 */ | 
 | 234 | 	rtc_tm_to_time(&alarm->time, &secs); | 
 | 235 |  | 
 | 236 | 	/* | 
 | 237 | 	 * Convert it to the number of seconds since 01-01-2000 00:00:00, since | 
 | 238 | 	 * we only have a small counter in the RTC. | 
 | 239 | 	 */ | 
 | 240 | 	secs -= get_elapsed_seconds(AB8500_RTC_EPOCH); | 
 | 241 |  | 
 | 242 | 	mins = secs / 60; | 
 | 243 |  | 
 | 244 | 	buf[2] = mins & 0xFF; | 
 | 245 | 	buf[1] = (mins >> 8) & 0xFF; | 
 | 246 | 	buf[0] = (mins >> 16) & 0xFF; | 
 | 247 |  | 
 | 248 | 	/* Set the alarm time */ | 
 | 249 | 	for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) { | 
 | 250 | 		retval = ab8500_write(ab8500, ab8500_rtc_alarm_regs[i], buf[i]); | 
 | 251 | 		if (retval < 0) | 
 | 252 | 			return retval; | 
 | 253 | 	} | 
 | 254 |  | 
 | 255 | 	return ab8500_rtc_irq_enable(dev, alarm->enabled); | 
 | 256 | } | 
 | 257 |  | 
 | 258 | static irqreturn_t rtc_alarm_handler(int irq, void *data) | 
 | 259 | { | 
 | 260 | 	struct rtc_device *rtc = data; | 
 | 261 | 	unsigned long events = RTC_IRQF | RTC_AF; | 
 | 262 |  | 
 | 263 | 	dev_dbg(&rtc->dev, "%s\n", __func__); | 
 | 264 | 	rtc_update_irq(rtc, 1, events); | 
 | 265 |  | 
 | 266 | 	return IRQ_HANDLED; | 
 | 267 | } | 
 | 268 |  | 
 | 269 | static const struct rtc_class_ops ab8500_rtc_ops = { | 
 | 270 | 	.read_time		= ab8500_rtc_read_time, | 
 | 271 | 	.set_time		= ab8500_rtc_set_time, | 
 | 272 | 	.read_alarm		= ab8500_rtc_read_alarm, | 
 | 273 | 	.set_alarm		= ab8500_rtc_set_alarm, | 
 | 274 | 	.alarm_irq_enable	= ab8500_rtc_irq_enable, | 
 | 275 | }; | 
 | 276 |  | 
 | 277 | static int __devinit ab8500_rtc_probe(struct platform_device *pdev) | 
 | 278 | { | 
 | 279 | 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); | 
 | 280 | 	int err; | 
 | 281 | 	struct rtc_device *rtc; | 
 | 282 | 	int rtc_ctrl; | 
 | 283 | 	int irq; | 
 | 284 |  | 
 | 285 | 	irq = platform_get_irq_byname(pdev, "ALARM"); | 
 | 286 | 	if (irq < 0) | 
 | 287 | 		return irq; | 
 | 288 |  | 
 | 289 | 	/* For RTC supply test */ | 
 | 290 | 	err = ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_STATUS_DATA, | 
 | 291 | 			RTC_STATUS_DATA); | 
 | 292 | 	if (err < 0) | 
 | 293 | 		return err; | 
 | 294 |  | 
 | 295 | 	/* Wait for reset by the PorRtc */ | 
 | 296 | 	msleep(1); | 
 | 297 |  | 
 | 298 | 	rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG); | 
 | 299 | 	if (rtc_ctrl < 0) | 
 | 300 | 		return rtc_ctrl; | 
 | 301 |  | 
 | 302 | 	/* Check if the RTC Supply fails */ | 
 | 303 | 	if (!(rtc_ctrl & RTC_STATUS_DATA)) { | 
 | 304 | 		dev_err(&pdev->dev, "RTC supply failure\n"); | 
 | 305 | 		return -ENODEV; | 
 | 306 | 	} | 
 | 307 |  | 
 | 308 | 	rtc = rtc_device_register("ab8500-rtc", &pdev->dev, &ab8500_rtc_ops, | 
 | 309 | 			THIS_MODULE); | 
 | 310 | 	if (IS_ERR(rtc)) { | 
 | 311 | 		dev_err(&pdev->dev, "Registration failed\n"); | 
 | 312 | 		err = PTR_ERR(rtc); | 
 | 313 | 		return err; | 
 | 314 | 	} | 
 | 315 |  | 
 | 316 | 	err = request_threaded_irq(irq, NULL, rtc_alarm_handler, 0, | 
 | 317 | 				   "ab8500-rtc", rtc); | 
 | 318 | 	if (err < 0) { | 
 | 319 | 		rtc_device_unregister(rtc); | 
 | 320 | 		return err; | 
 | 321 | 	} | 
 | 322 |  | 
 | 323 | 	platform_set_drvdata(pdev, rtc); | 
 | 324 |  | 
 | 325 | 	return 0; | 
 | 326 | } | 
 | 327 |  | 
 | 328 | static int __devexit ab8500_rtc_remove(struct platform_device *pdev) | 
 | 329 | { | 
 | 330 | 	struct rtc_device *rtc = platform_get_drvdata(pdev); | 
 | 331 | 	int irq = platform_get_irq_byname(pdev, "ALARM"); | 
 | 332 |  | 
 | 333 | 	free_irq(irq, rtc); | 
 | 334 | 	rtc_device_unregister(rtc); | 
 | 335 | 	platform_set_drvdata(pdev, NULL); | 
 | 336 |  | 
 | 337 | 	return 0; | 
 | 338 | } | 
 | 339 |  | 
 | 340 | static struct platform_driver ab8500_rtc_driver = { | 
 | 341 | 	.driver = { | 
 | 342 | 		.name = "ab8500-rtc", | 
 | 343 | 		.owner = THIS_MODULE, | 
 | 344 | 	}, | 
 | 345 | 	.probe	= ab8500_rtc_probe, | 
 | 346 | 	.remove = __devexit_p(ab8500_rtc_remove), | 
 | 347 | }; | 
 | 348 |  | 
 | 349 | static int __init ab8500_rtc_init(void) | 
 | 350 | { | 
 | 351 | 	return platform_driver_register(&ab8500_rtc_driver); | 
 | 352 | } | 
 | 353 |  | 
 | 354 | static void __exit ab8500_rtc_exit(void) | 
 | 355 | { | 
 | 356 | 	platform_driver_unregister(&ab8500_rtc_driver); | 
 | 357 | } | 
 | 358 |  | 
 | 359 | module_init(ab8500_rtc_init); | 
 | 360 | module_exit(ab8500_rtc_exit); | 
 | 361 | MODULE_AUTHOR("Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>"); | 
 | 362 | MODULE_DESCRIPTION("AB8500 RTC Driver"); | 
 | 363 | MODULE_LICENSE("GPL v2"); |