| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* Driver for SanDisk SDDR-55 SmartMedia reader | 
 | 2 |  * | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 3 |  * SDDR55 driver v0.1: | 
 | 4 |  * | 
 | 5 |  * First release | 
 | 6 |  * | 
 | 7 |  * Current development and maintenance by: | 
 | 8 |  *   (c) 2002 Simon Munton | 
 | 9 |  * | 
 | 10 |  * This program is free software; you can redistribute it and/or modify it | 
 | 11 |  * under the terms of the GNU General Public License as published by the | 
 | 12 |  * Free Software Foundation; either version 2, or (at your option) any | 
 | 13 |  * later version. | 
 | 14 |  * | 
 | 15 |  * This program is distributed in the hope that it will be useful, but | 
 | 16 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 17 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 | 18 |  * General Public License for more details. | 
 | 19 |  * | 
 | 20 |  * You should have received a copy of the GNU General Public License along | 
 | 21 |  * with this program; if not, write to the Free Software Foundation, Inc., | 
 | 22 |  * 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | 23 |  */ | 
 | 24 |  | 
 | 25 | #include <linux/jiffies.h> | 
 | 26 | #include <linux/errno.h> | 
| Alan Stern | 70fcc00 | 2009-02-12 14:47:59 -0500 | [diff] [blame] | 27 | #include <linux/module.h> | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 28 | #include <linux/slab.h> | 
 | 29 |  | 
 | 30 | #include <scsi/scsi.h> | 
 | 31 | #include <scsi/scsi_cmnd.h> | 
 | 32 |  | 
 | 33 | #include "usb.h" | 
 | 34 | #include "transport.h" | 
 | 35 | #include "protocol.h" | 
 | 36 | #include "debug.h" | 
| Alan Stern | 70fcc00 | 2009-02-12 14:47:59 -0500 | [diff] [blame] | 37 |  | 
| Maciej Grela | 4246b06 | 2009-02-28 12:39:20 -0800 | [diff] [blame] | 38 | MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); | 
 | 39 | MODULE_AUTHOR("Simon Munton"); | 
 | 40 | MODULE_LICENSE("GPL"); | 
| Alan Stern | 70fcc00 | 2009-02-12 14:47:59 -0500 | [diff] [blame] | 41 |  | 
 | 42 | /* | 
 | 43 |  * The table of devices | 
 | 44 |  */ | 
 | 45 | #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ | 
 | 46 | 		    vendorName, productName, useProtocol, useTransport, \ | 
 | 47 | 		    initFunction, flags) \ | 
 | 48 | { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ | 
 | 49 |   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } | 
 | 50 |  | 
 | 51 | struct usb_device_id sddr55_usb_ids[] = { | 
 | 52 | #	include "unusual_sddr55.h" | 
 | 53 | 	{ }		/* Terminating entry */ | 
 | 54 | }; | 
 | 55 | MODULE_DEVICE_TABLE(usb, sddr55_usb_ids); | 
 | 56 |  | 
 | 57 | #undef UNUSUAL_DEV | 
 | 58 |  | 
 | 59 | /* | 
 | 60 |  * The flags table | 
 | 61 |  */ | 
 | 62 | #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ | 
 | 63 | 		    vendor_name, product_name, use_protocol, use_transport, \ | 
 | 64 | 		    init_function, Flags) \ | 
 | 65 | { \ | 
 | 66 | 	.vendorName = vendor_name,	\ | 
 | 67 | 	.productName = product_name,	\ | 
 | 68 | 	.useProtocol = use_protocol,	\ | 
 | 69 | 	.useTransport = use_transport,	\ | 
 | 70 | 	.initFunction = init_function,	\ | 
 | 71 | } | 
 | 72 |  | 
 | 73 | static struct us_unusual_dev sddr55_unusual_dev_list[] = { | 
 | 74 | #	include "unusual_sddr55.h" | 
 | 75 | 	{ }		/* Terminating entry */ | 
 | 76 | }; | 
 | 77 |  | 
 | 78 | #undef UNUSUAL_DEV | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 79 |  | 
 | 80 |  | 
 | 81 | #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) | 
 | 82 | #define LSB_of(s) ((s)&0xFF) | 
 | 83 | #define MSB_of(s) ((s)>>8) | 
 | 84 | #define PAGESIZE  512 | 
 | 85 |  | 
 | 86 | #define set_sense_info(sk, asc, ascq)	\ | 
 | 87 |     do {				\ | 
 | 88 | 	info->sense_data[2] = sk;	\ | 
 | 89 | 	info->sense_data[12] = asc;	\ | 
 | 90 | 	info->sense_data[13] = ascq;	\ | 
 | 91 | 	} while (0) | 
 | 92 |  | 
 | 93 |  | 
 | 94 | struct sddr55_card_info { | 
 | 95 | 	unsigned long	capacity;	/* Size of card in bytes */ | 
 | 96 | 	int		max_log_blks;	/* maximum number of logical blocks */ | 
 | 97 | 	int		pageshift;	/* log2 of pagesize */ | 
 | 98 | 	int		smallpageshift;	/* 1 if pagesize == 256 */ | 
 | 99 | 	int		blocksize;	/* Size of block in pages */ | 
 | 100 | 	int		blockshift;	/* log2 of blocksize */ | 
 | 101 | 	int		blockmask;	/* 2^blockshift - 1 */ | 
 | 102 | 	int		read_only;	/* non zero if card is write protected */ | 
 | 103 | 	int		force_read_only;	/* non zero if we find a map error*/ | 
 | 104 | 	int		*lba_to_pba;	/* logical to physical map */ | 
 | 105 | 	int		*pba_to_lba;	/* physical to logical map */ | 
 | 106 | 	int		fatal_error;	/* set if we detect something nasty */ | 
 | 107 | 	unsigned long 	last_access;	/* number of jiffies since we last talked to device */ | 
 | 108 | 	unsigned char   sense_data[18]; | 
 | 109 | }; | 
 | 110 |  | 
 | 111 |  | 
 | 112 | #define NOT_ALLOCATED		0xffffffff | 
 | 113 | #define BAD_BLOCK		0xffff | 
 | 114 | #define CIS_BLOCK		0x400 | 
 | 115 | #define UNUSED_BLOCK		0x3ff | 
 | 116 |  | 
 | 117 | static int | 
 | 118 | sddr55_bulk_transport(struct us_data *us, int direction, | 
 | 119 | 		      unsigned char *data, unsigned int len) { | 
 | 120 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; | 
 | 121 | 	unsigned int pipe = (direction == DMA_FROM_DEVICE) ? | 
 | 122 | 			us->recv_bulk_pipe : us->send_bulk_pipe; | 
 | 123 |  | 
 | 124 | 	if (!len) | 
 | 125 | 		return USB_STOR_XFER_GOOD; | 
 | 126 | 	info->last_access = jiffies; | 
 | 127 | 	return usb_stor_bulk_transfer_buf(us, pipe, data, len, NULL); | 
 | 128 | } | 
 | 129 |  | 
 | 130 | /* check if card inserted, if there is, update read_only status | 
 | 131 |  * return non zero if no card | 
 | 132 |  */ | 
 | 133 |  | 
 | 134 | static int sddr55_status(struct us_data *us) | 
 | 135 | { | 
 | 136 | 	int result; | 
 | 137 | 	unsigned char *command = us->iobuf; | 
 | 138 | 	unsigned char *status = us->iobuf; | 
 | 139 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; | 
 | 140 |  | 
 | 141 | 	/* send command */ | 
 | 142 | 	memset(command, 0, 8); | 
 | 143 | 	command[5] = 0xB0; | 
 | 144 | 	command[7] = 0x80; | 
 | 145 | 	result = sddr55_bulk_transport(us, | 
 | 146 | 		DMA_TO_DEVICE, command, 8); | 
 | 147 |  | 
 | 148 | 	US_DEBUGP("Result for send_command in status %d\n", | 
 | 149 | 		result); | 
 | 150 |  | 
 | 151 | 	if (result != USB_STOR_XFER_GOOD) { | 
 | 152 | 		set_sense_info (4, 0, 0);	/* hardware error */ | 
 | 153 | 		return USB_STOR_TRANSPORT_ERROR; | 
 | 154 | 	} | 
 | 155 |  | 
 | 156 | 	result = sddr55_bulk_transport(us, | 
 | 157 | 		DMA_FROM_DEVICE, status,	4); | 
 | 158 |  | 
 | 159 | 	/* expect to get short transfer if no card fitted */ | 
 | 160 | 	if (result == USB_STOR_XFER_SHORT || result == USB_STOR_XFER_STALLED) { | 
 | 161 | 		/* had a short transfer, no card inserted, free map memory */ | 
| Jesper Juhl | 1bc3c9e | 2005-04-18 17:39:34 -0700 | [diff] [blame] | 162 | 		kfree(info->lba_to_pba); | 
 | 163 | 		kfree(info->pba_to_lba); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 164 | 		info->lba_to_pba = NULL; | 
 | 165 | 		info->pba_to_lba = NULL; | 
 | 166 |  | 
 | 167 | 		info->fatal_error = 0; | 
 | 168 | 		info->force_read_only = 0; | 
 | 169 |  | 
 | 170 | 		set_sense_info (2, 0x3a, 0);	/* not ready, medium not present */ | 
 | 171 | 		return USB_STOR_TRANSPORT_FAILED; | 
 | 172 | 	} | 
 | 173 |  | 
 | 174 | 	if (result != USB_STOR_XFER_GOOD) { | 
 | 175 | 		set_sense_info (4, 0, 0);	/* hardware error */ | 
 | 176 | 		return USB_STOR_TRANSPORT_FAILED; | 
 | 177 | 	} | 
 | 178 | 	 | 
 | 179 | 	/* check write protect status */ | 
 | 180 | 	info->read_only = (status[0] & 0x20); | 
 | 181 |  | 
 | 182 | 	/* now read status */ | 
 | 183 | 	result = sddr55_bulk_transport(us, | 
 | 184 | 		DMA_FROM_DEVICE, status,	2); | 
 | 185 |  | 
 | 186 | 	if (result != USB_STOR_XFER_GOOD) { | 
 | 187 | 		set_sense_info (4, 0, 0);	/* hardware error */ | 
 | 188 | 	} | 
 | 189 |  | 
 | 190 | 	return (result == USB_STOR_XFER_GOOD ? | 
 | 191 | 			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_FAILED); | 
 | 192 | } | 
 | 193 |  | 
 | 194 |  | 
 | 195 | static int sddr55_read_data(struct us_data *us, | 
 | 196 | 		unsigned int lba, | 
 | 197 | 		unsigned int page, | 
 | 198 | 		unsigned short sectors) { | 
 | 199 |  | 
 | 200 | 	int result = USB_STOR_TRANSPORT_GOOD; | 
 | 201 | 	unsigned char *command = us->iobuf; | 
 | 202 | 	unsigned char *status = us->iobuf; | 
 | 203 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; | 
 | 204 | 	unsigned char *buffer; | 
 | 205 |  | 
 | 206 | 	unsigned int pba; | 
 | 207 | 	unsigned long address; | 
 | 208 |  | 
 | 209 | 	unsigned short pages; | 
| Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 210 | 	unsigned int len, offset; | 
 | 211 | 	struct scatterlist *sg; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 212 |  | 
 | 213 | 	// Since we only read in one block at a time, we have to create | 
 | 214 | 	// a bounce buffer and move the data a piece at a time between the | 
 | 215 | 	// bounce buffer and the actual transfer buffer. | 
 | 216 |  | 
 | 217 | 	len = min((unsigned int) sectors, (unsigned int) info->blocksize >> | 
 | 218 | 			info->smallpageshift) * PAGESIZE; | 
 | 219 | 	buffer = kmalloc(len, GFP_NOIO); | 
 | 220 | 	if (buffer == NULL) | 
 | 221 | 		return USB_STOR_TRANSPORT_ERROR; /* out of memory */ | 
| Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 222 | 	offset = 0; | 
 | 223 | 	sg = NULL; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 224 |  | 
 | 225 | 	while (sectors>0) { | 
 | 226 |  | 
 | 227 | 		/* have we got to end? */ | 
 | 228 | 		if (lba >= info->max_log_blks) | 
 | 229 | 			break; | 
 | 230 |  | 
 | 231 | 		pba = info->lba_to_pba[lba]; | 
 | 232 |  | 
 | 233 | 		// Read as many sectors as possible in this block | 
 | 234 |  | 
 | 235 | 		pages = min((unsigned int) sectors << info->smallpageshift, | 
 | 236 | 				info->blocksize - page); | 
 | 237 | 		len = pages << info->pageshift; | 
 | 238 |  | 
 | 239 | 		US_DEBUGP("Read %02X pages, from PBA %04X" | 
 | 240 | 			" (LBA %04X) page %02X\n", | 
 | 241 | 			pages, pba, lba, page); | 
 | 242 |  | 
 | 243 | 		if (pba == NOT_ALLOCATED) { | 
 | 244 | 			/* no pba for this lba, fill with zeroes */ | 
 | 245 | 			memset (buffer, 0, len); | 
 | 246 | 		} else { | 
 | 247 |  | 
 | 248 | 			address = (pba << info->blockshift) + page; | 
 | 249 |  | 
 | 250 | 			command[0] = 0; | 
 | 251 | 			command[1] = LSB_of(address>>16); | 
 | 252 | 			command[2] = LSB_of(address>>8); | 
 | 253 | 			command[3] = LSB_of(address); | 
 | 254 |  | 
 | 255 | 			command[4] = 0; | 
 | 256 | 			command[5] = 0xB0; | 
 | 257 | 			command[6] = LSB_of(pages << (1 - info->smallpageshift)); | 
 | 258 | 			command[7] = 0x85; | 
 | 259 |  | 
 | 260 | 			/* send command */ | 
 | 261 | 			result = sddr55_bulk_transport(us, | 
 | 262 | 				DMA_TO_DEVICE, command, 8); | 
 | 263 |  | 
 | 264 | 			US_DEBUGP("Result for send_command in read_data %d\n", | 
 | 265 | 				result); | 
 | 266 |  | 
 | 267 | 			if (result != USB_STOR_XFER_GOOD) { | 
 | 268 | 				result = USB_STOR_TRANSPORT_ERROR; | 
 | 269 | 				goto leave; | 
 | 270 | 			} | 
 | 271 |  | 
 | 272 | 			/* read data */ | 
 | 273 | 			result = sddr55_bulk_transport(us, | 
 | 274 | 				DMA_FROM_DEVICE, buffer, len); | 
 | 275 |  | 
 | 276 | 			if (result != USB_STOR_XFER_GOOD) { | 
 | 277 | 				result = USB_STOR_TRANSPORT_ERROR; | 
 | 278 | 				goto leave; | 
 | 279 | 			} | 
 | 280 |  | 
 | 281 | 			/* now read status */ | 
 | 282 | 			result = sddr55_bulk_transport(us, | 
 | 283 | 				DMA_FROM_DEVICE, status, 2); | 
 | 284 |  | 
 | 285 | 			if (result != USB_STOR_XFER_GOOD) { | 
 | 286 | 				result = USB_STOR_TRANSPORT_ERROR; | 
 | 287 | 				goto leave; | 
 | 288 | 			} | 
 | 289 |  | 
 | 290 | 			/* check status for error */ | 
 | 291 | 			if (status[0] == 0xff && status[1] == 0x4) { | 
 | 292 | 				set_sense_info (3, 0x11, 0); | 
 | 293 | 				result = USB_STOR_TRANSPORT_FAILED; | 
 | 294 | 				goto leave; | 
 | 295 | 			} | 
 | 296 | 		} | 
 | 297 |  | 
 | 298 | 		// Store the data in the transfer buffer | 
 | 299 | 		usb_stor_access_xfer_buf(buffer, len, us->srb, | 
| Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 300 | 				&sg, &offset, TO_XFER_BUF); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 301 |  | 
 | 302 | 		page = 0; | 
 | 303 | 		lba++; | 
 | 304 | 		sectors -= pages >> info->smallpageshift; | 
 | 305 | 	} | 
 | 306 |  | 
 | 307 | 	result = USB_STOR_TRANSPORT_GOOD; | 
 | 308 |  | 
 | 309 | leave: | 
 | 310 | 	kfree(buffer); | 
 | 311 |  | 
 | 312 | 	return result; | 
 | 313 | } | 
 | 314 |  | 
 | 315 | static int sddr55_write_data(struct us_data *us, | 
 | 316 | 		unsigned int lba, | 
 | 317 | 		unsigned int page, | 
 | 318 | 		unsigned short sectors) { | 
 | 319 |  | 
 | 320 | 	int result = USB_STOR_TRANSPORT_GOOD; | 
 | 321 | 	unsigned char *command = us->iobuf; | 
 | 322 | 	unsigned char *status = us->iobuf; | 
 | 323 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; | 
 | 324 | 	unsigned char *buffer; | 
 | 325 |  | 
 | 326 | 	unsigned int pba; | 
 | 327 | 	unsigned int new_pba; | 
 | 328 | 	unsigned long address; | 
 | 329 |  | 
 | 330 | 	unsigned short pages; | 
 | 331 | 	int i; | 
| Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 332 | 	unsigned int len, offset; | 
 | 333 | 	struct scatterlist *sg; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 334 |  | 
 | 335 | 	/* check if we are allowed to write */ | 
 | 336 | 	if (info->read_only || info->force_read_only) { | 
 | 337 | 		set_sense_info (7, 0x27, 0);	/* read only */ | 
 | 338 | 		return USB_STOR_TRANSPORT_FAILED; | 
 | 339 | 	} | 
 | 340 |  | 
 | 341 | 	// Since we only write one block at a time, we have to create | 
 | 342 | 	// a bounce buffer and move the data a piece at a time between the | 
 | 343 | 	// bounce buffer and the actual transfer buffer. | 
 | 344 |  | 
 | 345 | 	len = min((unsigned int) sectors, (unsigned int) info->blocksize >> | 
 | 346 | 			info->smallpageshift) * PAGESIZE; | 
 | 347 | 	buffer = kmalloc(len, GFP_NOIO); | 
 | 348 | 	if (buffer == NULL) | 
 | 349 | 		return USB_STOR_TRANSPORT_ERROR; | 
| Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 350 | 	offset = 0; | 
 | 351 | 	sg = NULL; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 352 |  | 
 | 353 | 	while (sectors > 0) { | 
 | 354 |  | 
 | 355 | 		/* have we got to end? */ | 
 | 356 | 		if (lba >= info->max_log_blks) | 
 | 357 | 			break; | 
 | 358 |  | 
 | 359 | 		pba = info->lba_to_pba[lba]; | 
 | 360 |  | 
 | 361 | 		// Write as many sectors as possible in this block | 
 | 362 |  | 
 | 363 | 		pages = min((unsigned int) sectors << info->smallpageshift, | 
 | 364 | 				info->blocksize - page); | 
 | 365 | 		len = pages << info->pageshift; | 
 | 366 |  | 
 | 367 | 		// Get the data from the transfer buffer | 
 | 368 | 		usb_stor_access_xfer_buf(buffer, len, us->srb, | 
| Jens Axboe | 1f6f31a | 2007-05-11 12:33:09 +0200 | [diff] [blame] | 369 | 				&sg, &offset, FROM_XFER_BUF); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 370 |  | 
 | 371 | 		US_DEBUGP("Write %02X pages, to PBA %04X" | 
 | 372 | 			" (LBA %04X) page %02X\n", | 
 | 373 | 			pages, pba, lba, page); | 
 | 374 | 			 | 
 | 375 | 		command[4] = 0; | 
 | 376 |  | 
 | 377 | 		if (pba == NOT_ALLOCATED) { | 
 | 378 | 			/* no pba allocated for this lba, find a free pba to use */ | 
 | 379 |  | 
 | 380 | 			int max_pba = (info->max_log_blks / 250 ) * 256; | 
 | 381 | 			int found_count = 0; | 
 | 382 | 			int found_pba = -1; | 
 | 383 |  | 
 | 384 | 			/* set pba to first block in zone lba is in */ | 
 | 385 | 			pba = (lba / 1000) * 1024; | 
 | 386 |  | 
 | 387 | 			US_DEBUGP("No PBA for LBA %04X\n",lba); | 
 | 388 |  | 
 | 389 | 			if (max_pba > 1024) | 
 | 390 | 				max_pba = 1024; | 
 | 391 |  | 
 | 392 | 			/* | 
 | 393 | 			 * Scan through the map looking for an unused block | 
 | 394 | 			 * leave 16 unused blocks at start (or as many as | 
 | 395 | 			 * possible) since the sddr55 seems to reuse a used | 
 | 396 | 			 * block when it shouldn't if we don't leave space. | 
 | 397 | 			 */ | 
 | 398 | 			for (i = 0; i < max_pba; i++, pba++) { | 
 | 399 | 				if (info->pba_to_lba[pba] == UNUSED_BLOCK) { | 
 | 400 | 					found_pba = pba; | 
 | 401 | 					if (found_count++ > 16) | 
 | 402 | 						break; | 
 | 403 | 				} | 
 | 404 | 			} | 
 | 405 |  | 
 | 406 | 			pba = found_pba; | 
 | 407 |  | 
 | 408 | 			if (pba == -1) { | 
 | 409 | 				/* oh dear */ | 
 | 410 | 				US_DEBUGP("Couldn't find unallocated block\n"); | 
 | 411 |  | 
 | 412 | 				set_sense_info (3, 0x31, 0);	/* medium error */ | 
 | 413 | 				result = USB_STOR_TRANSPORT_FAILED; | 
 | 414 | 				goto leave; | 
 | 415 | 			} | 
 | 416 |  | 
 | 417 | 			US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba); | 
 | 418 |  | 
 | 419 | 			/* set writing to unallocated block flag */ | 
 | 420 | 			command[4] = 0x40; | 
 | 421 | 		} | 
 | 422 |  | 
 | 423 | 		address = (pba << info->blockshift) + page; | 
 | 424 |  | 
 | 425 | 		command[1] = LSB_of(address>>16); | 
 | 426 | 		command[2] = LSB_of(address>>8);  | 
 | 427 | 		command[3] = LSB_of(address); | 
 | 428 |  | 
 | 429 | 		/* set the lba into the command, modulo 1000 */ | 
 | 430 | 		command[0] = LSB_of(lba % 1000); | 
 | 431 | 		command[6] = MSB_of(lba % 1000); | 
 | 432 |  | 
 | 433 | 		command[4] |= LSB_of(pages >> info->smallpageshift); | 
 | 434 | 		command[5] = 0xB0; | 
 | 435 | 		command[7] = 0x86; | 
 | 436 |  | 
 | 437 | 		/* send command */ | 
 | 438 | 		result = sddr55_bulk_transport(us, | 
 | 439 | 			DMA_TO_DEVICE, command, 8); | 
 | 440 |  | 
 | 441 | 		if (result != USB_STOR_XFER_GOOD) { | 
 | 442 | 			US_DEBUGP("Result for send_command in write_data %d\n", | 
 | 443 | 			result); | 
 | 444 |  | 
 | 445 | 			/* set_sense_info is superfluous here? */ | 
 | 446 | 			set_sense_info (3, 0x3, 0);/* peripheral write error */ | 
 | 447 | 			result = USB_STOR_TRANSPORT_FAILED; | 
 | 448 | 			goto leave; | 
 | 449 | 		} | 
 | 450 |  | 
 | 451 | 		/* send the data */ | 
 | 452 | 		result = sddr55_bulk_transport(us, | 
 | 453 | 			DMA_TO_DEVICE, buffer, len); | 
 | 454 |  | 
 | 455 | 		if (result != USB_STOR_XFER_GOOD) { | 
 | 456 | 			US_DEBUGP("Result for send_data in write_data %d\n", | 
 | 457 | 				  result); | 
 | 458 |  | 
 | 459 | 			/* set_sense_info is superfluous here? */ | 
 | 460 | 			set_sense_info (3, 0x3, 0);/* peripheral write error */ | 
 | 461 | 			result = USB_STOR_TRANSPORT_FAILED; | 
 | 462 | 			goto leave; | 
 | 463 | 		} | 
 | 464 |  | 
 | 465 | 		/* now read status */ | 
 | 466 | 		result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6); | 
 | 467 |  | 
 | 468 | 		if (result != USB_STOR_XFER_GOOD) { | 
 | 469 | 			US_DEBUGP("Result for get_status in write_data %d\n", | 
 | 470 | 				  result); | 
 | 471 |  | 
 | 472 | 			/* set_sense_info is superfluous here? */ | 
 | 473 | 			set_sense_info (3, 0x3, 0);/* peripheral write error */ | 
 | 474 | 			result = USB_STOR_TRANSPORT_FAILED; | 
 | 475 | 			goto leave; | 
 | 476 | 		} | 
 | 477 |  | 
 | 478 | 		new_pba = (status[3] + (status[4] << 8) + (status[5] << 16)) | 
 | 479 | 						  >> info->blockshift; | 
 | 480 |  | 
 | 481 | 		/* check status for error */ | 
 | 482 | 		if (status[0] == 0xff && status[1] == 0x4) { | 
 | 483 | 			info->pba_to_lba[new_pba] = BAD_BLOCK; | 
 | 484 |  | 
 | 485 | 			set_sense_info (3, 0x0c, 0); | 
 | 486 | 			result = USB_STOR_TRANSPORT_FAILED; | 
 | 487 | 			goto leave; | 
 | 488 | 		} | 
 | 489 |  | 
 | 490 | 		US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", | 
 | 491 | 			lba, pba, new_pba); | 
 | 492 |  | 
 | 493 | 		/* update the lba<->pba maps, note new_pba might be the same as pba */ | 
 | 494 | 		info->lba_to_pba[lba] = new_pba; | 
 | 495 | 		info->pba_to_lba[pba] = UNUSED_BLOCK; | 
 | 496 |  | 
 | 497 | 		/* check that new_pba wasn't already being used */ | 
 | 498 | 		if (info->pba_to_lba[new_pba] != UNUSED_BLOCK) { | 
 | 499 | 			printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n", | 
 | 500 | 				new_pba, info->pba_to_lba[new_pba]); | 
 | 501 | 			info->fatal_error = 1; | 
 | 502 | 			set_sense_info (3, 0x31, 0); | 
 | 503 | 			result = USB_STOR_TRANSPORT_FAILED; | 
 | 504 | 			goto leave; | 
 | 505 | 		} | 
 | 506 |  | 
 | 507 | 		/* update the pba<->lba maps for new_pba */ | 
 | 508 | 		info->pba_to_lba[new_pba] = lba % 1000; | 
 | 509 |  | 
 | 510 | 		page = 0; | 
 | 511 | 		lba++; | 
 | 512 | 		sectors -= pages >> info->smallpageshift; | 
 | 513 | 	} | 
 | 514 | 	result = USB_STOR_TRANSPORT_GOOD; | 
 | 515 |  | 
 | 516 |  leave: | 
 | 517 | 	kfree(buffer); | 
 | 518 | 	return result; | 
 | 519 | } | 
 | 520 |  | 
 | 521 | static int sddr55_read_deviceID(struct us_data *us, | 
 | 522 | 		unsigned char *manufacturerID, | 
 | 523 | 		unsigned char *deviceID) { | 
 | 524 |  | 
 | 525 | 	int result; | 
 | 526 | 	unsigned char *command = us->iobuf; | 
 | 527 | 	unsigned char *content = us->iobuf; | 
 | 528 |  | 
 | 529 | 	memset(command, 0, 8); | 
 | 530 | 	command[5] = 0xB0; | 
 | 531 | 	command[7] = 0x84; | 
 | 532 | 	result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); | 
 | 533 |  | 
 | 534 | 	US_DEBUGP("Result of send_control for device ID is %d\n", | 
 | 535 | 		result); | 
 | 536 |  | 
 | 537 | 	if (result != USB_STOR_XFER_GOOD) | 
 | 538 | 		return USB_STOR_TRANSPORT_ERROR; | 
 | 539 |  | 
 | 540 | 	result = sddr55_bulk_transport(us, | 
 | 541 | 		DMA_FROM_DEVICE, content, 4); | 
 | 542 |  | 
 | 543 | 	if (result != USB_STOR_XFER_GOOD) | 
 | 544 | 		return USB_STOR_TRANSPORT_ERROR; | 
 | 545 |  | 
 | 546 | 	*manufacturerID = content[0]; | 
 | 547 | 	*deviceID = content[1]; | 
 | 548 |  | 
 | 549 | 	if (content[0] != 0xff)	{ | 
 | 550 |     		result = sddr55_bulk_transport(us, | 
 | 551 | 			DMA_FROM_DEVICE, content, 2); | 
 | 552 | 	} | 
 | 553 |  | 
 | 554 | 	return USB_STOR_TRANSPORT_GOOD; | 
 | 555 | } | 
 | 556 |  | 
 | 557 |  | 
| Alan Stern | 70fcc00 | 2009-02-12 14:47:59 -0500 | [diff] [blame] | 558 | static int sddr55_reset(struct us_data *us) | 
 | 559 | { | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 560 | 	return 0; | 
 | 561 | } | 
 | 562 |  | 
 | 563 |  | 
 | 564 | static unsigned long sddr55_get_capacity(struct us_data *us) { | 
 | 565 |  | 
| Andrew Morton | 8a20acc | 2008-03-04 15:25:08 -0800 | [diff] [blame] | 566 | 	unsigned char uninitialized_var(manufacturerID); | 
 | 567 | 	unsigned char uninitialized_var(deviceID); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 568 | 	int result; | 
 | 569 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; | 
 | 570 |  | 
 | 571 | 	US_DEBUGP("Reading capacity...\n"); | 
 | 572 |  | 
 | 573 | 	result = sddr55_read_deviceID(us, | 
 | 574 | 		&manufacturerID, | 
 | 575 | 		&deviceID); | 
 | 576 |  | 
 | 577 | 	US_DEBUGP("Result of read_deviceID is %d\n", | 
 | 578 | 		result); | 
 | 579 |  | 
 | 580 | 	if (result != USB_STOR_XFER_GOOD) | 
 | 581 | 		return 0; | 
 | 582 |  | 
 | 583 | 	US_DEBUGP("Device ID = %02X\n", deviceID); | 
 | 584 | 	US_DEBUGP("Manuf  ID = %02X\n", manufacturerID); | 
 | 585 |  | 
 | 586 | 	info->pageshift = 9; | 
 | 587 | 	info->smallpageshift = 0; | 
 | 588 | 	info->blocksize = 16; | 
 | 589 | 	info->blockshift = 4; | 
 | 590 | 	info->blockmask = 15; | 
 | 591 |  | 
 | 592 | 	switch (deviceID) { | 
 | 593 |  | 
 | 594 | 	case 0x6e: // 1MB | 
 | 595 | 	case 0xe8: | 
 | 596 | 	case 0xec: | 
 | 597 | 		info->pageshift = 8; | 
 | 598 | 		info->smallpageshift = 1; | 
 | 599 | 		return 0x00100000; | 
 | 600 |  | 
 | 601 | 	case 0xea: // 2MB | 
 | 602 | 	case 0x64: | 
 | 603 | 		info->pageshift = 8; | 
 | 604 | 		info->smallpageshift = 1; | 
 | 605 | 	case 0x5d: // 5d is a ROM card with pagesize 512. | 
 | 606 | 		return 0x00200000; | 
 | 607 |  | 
 | 608 | 	case 0xe3: // 4MB | 
 | 609 | 	case 0xe5: | 
 | 610 | 	case 0x6b: | 
 | 611 | 	case 0xd5: | 
 | 612 | 		return 0x00400000; | 
 | 613 |  | 
 | 614 | 	case 0xe6: // 8MB | 
 | 615 | 	case 0xd6: | 
 | 616 | 		return 0x00800000; | 
 | 617 |  | 
 | 618 | 	case 0x73: // 16MB | 
 | 619 | 		info->blocksize = 32; | 
 | 620 | 		info->blockshift = 5; | 
 | 621 | 		info->blockmask = 31; | 
 | 622 | 		return 0x01000000; | 
 | 623 |  | 
 | 624 | 	case 0x75: // 32MB | 
 | 625 | 		info->blocksize = 32; | 
 | 626 | 		info->blockshift = 5; | 
 | 627 | 		info->blockmask = 31; | 
 | 628 | 		return 0x02000000; | 
 | 629 |  | 
 | 630 | 	case 0x76: // 64MB | 
 | 631 | 		info->blocksize = 32; | 
 | 632 | 		info->blockshift = 5; | 
 | 633 | 		info->blockmask = 31; | 
 | 634 | 		return 0x04000000; | 
 | 635 |  | 
 | 636 | 	case 0x79: // 128MB | 
 | 637 | 		info->blocksize = 32; | 
 | 638 | 		info->blockshift = 5; | 
 | 639 | 		info->blockmask = 31; | 
 | 640 | 		return 0x08000000; | 
 | 641 |  | 
 | 642 | 	default: // unknown | 
 | 643 | 		return 0; | 
 | 644 |  | 
 | 645 | 	} | 
 | 646 | } | 
 | 647 |  | 
 | 648 | static int sddr55_read_map(struct us_data *us) { | 
 | 649 |  | 
 | 650 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)(us->extra); | 
 | 651 | 	int numblocks; | 
 | 652 | 	unsigned char *buffer; | 
 | 653 | 	unsigned char *command = us->iobuf; | 
 | 654 | 	int i; | 
 | 655 | 	unsigned short lba; | 
 | 656 | 	unsigned short max_lba; | 
 | 657 | 	int result; | 
 | 658 |  | 
 | 659 | 	if (!info->capacity) | 
 | 660 | 		return -1; | 
 | 661 |  | 
 | 662 | 	numblocks = info->capacity >> (info->blockshift + info->pageshift); | 
 | 663 | 	 | 
 | 664 | 	buffer = kmalloc( numblocks * 2, GFP_NOIO ); | 
 | 665 | 	 | 
 | 666 | 	if (!buffer) | 
 | 667 | 		return -1; | 
 | 668 |  | 
 | 669 | 	memset(command, 0, 8); | 
 | 670 | 	command[5] = 0xB0; | 
 | 671 | 	command[6] = numblocks * 2 / 256; | 
 | 672 | 	command[7] = 0x8A; | 
 | 673 |  | 
 | 674 | 	result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); | 
 | 675 |  | 
 | 676 | 	if ( result != USB_STOR_XFER_GOOD) { | 
 | 677 | 		kfree (buffer); | 
 | 678 | 		return -1; | 
 | 679 | 	} | 
 | 680 |  | 
 | 681 | 	result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, buffer, numblocks * 2); | 
 | 682 |  | 
 | 683 | 	if ( result != USB_STOR_XFER_GOOD) { | 
 | 684 | 		kfree (buffer); | 
 | 685 | 		return -1; | 
 | 686 | 	} | 
 | 687 |  | 
 | 688 | 	result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, command, 2); | 
 | 689 |  | 
 | 690 | 	if ( result != USB_STOR_XFER_GOOD) { | 
 | 691 | 		kfree (buffer); | 
 | 692 | 		return -1; | 
 | 693 | 	} | 
 | 694 |  | 
| Jesper Juhl | 1bc3c9e | 2005-04-18 17:39:34 -0700 | [diff] [blame] | 695 | 	kfree(info->lba_to_pba); | 
 | 696 | 	kfree(info->pba_to_lba); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 697 | 	info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO); | 
 | 698 | 	info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); | 
 | 699 |  | 
 | 700 | 	if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { | 
| Jesper Juhl | 1bc3c9e | 2005-04-18 17:39:34 -0700 | [diff] [blame] | 701 | 		kfree(info->lba_to_pba); | 
 | 702 | 		kfree(info->pba_to_lba); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 703 | 		info->lba_to_pba = NULL; | 
 | 704 | 		info->pba_to_lba = NULL; | 
 | 705 | 		kfree(buffer); | 
 | 706 | 		return -1; | 
 | 707 | 	} | 
 | 708 |  | 
 | 709 | 	memset(info->lba_to_pba, 0xff, numblocks*sizeof(int)); | 
 | 710 | 	memset(info->pba_to_lba, 0xff, numblocks*sizeof(int)); | 
 | 711 |  | 
 | 712 | 	/* set maximum lba */ | 
 | 713 | 	max_lba = info->max_log_blks; | 
 | 714 | 	if (max_lba > 1000) | 
 | 715 | 		max_lba = 1000; | 
 | 716 |  | 
 | 717 | 	// Each block is 64 bytes of control data, so block i is located in | 
 | 718 | 	// scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11) | 
 | 719 |  | 
 | 720 | 	for (i=0; i<numblocks; i++) { | 
 | 721 | 		int zone = i / 1024; | 
 | 722 |  | 
 | 723 | 		lba = short_pack(buffer[i * 2], buffer[i * 2 + 1]); | 
 | 724 |  | 
 | 725 | 			/* Every 1024 physical blocks ("zone"), the LBA numbers | 
 | 726 | 			 * go back to zero, but are within a higher | 
 | 727 | 			 * block of LBA's. Also, there is a maximum of | 
 | 728 | 			 * 1000 LBA's per zone. In other words, in PBA | 
 | 729 | 			 * 1024-2047 you will find LBA 0-999 which are | 
 | 730 | 			 * really LBA 1000-1999. Yes, this wastes 24 | 
 | 731 | 			 * physical blocks per zone. Go figure.  | 
 | 732 | 			 * These devices can have blocks go bad, so there | 
 | 733 | 			 * are 24 spare blocks to use when blocks do go bad. | 
 | 734 | 			 */ | 
 | 735 |  | 
 | 736 | 			/* SDDR55 returns 0xffff for a bad block, and 0x400 for the  | 
 | 737 | 			 * CIS block. (Is this true for cards 8MB or less??) | 
 | 738 | 			 * Record these in the physical to logical map | 
 | 739 | 			 */  | 
 | 740 |  | 
 | 741 | 		info->pba_to_lba[i] = lba; | 
 | 742 |  | 
 | 743 | 		if (lba >= max_lba) { | 
 | 744 | 			continue; | 
 | 745 | 		} | 
 | 746 | 		 | 
 | 747 | 		if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED && | 
 | 748 | 		    !info->force_read_only) { | 
| Frank Seidel | 6f8aa65 | 2009-02-05 16:16:24 +0100 | [diff] [blame] | 749 | 			printk(KERN_WARNING | 
 | 750 | 			       "sddr55: map inconsistency at LBA %04X\n", | 
 | 751 | 			       lba + zone * 1000); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 752 | 			info->force_read_only = 1; | 
 | 753 | 		} | 
 | 754 |  | 
 | 755 | 		if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF)) | 
 | 756 | 			US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i); | 
 | 757 |  | 
 | 758 | 		info->lba_to_pba[lba + zone * 1000] = i; | 
 | 759 | 	} | 
 | 760 |  | 
 | 761 | 	kfree(buffer); | 
 | 762 | 	return 0; | 
 | 763 | } | 
 | 764 |  | 
 | 765 |  | 
 | 766 | static void sddr55_card_info_destructor(void *extra) { | 
 | 767 | 	struct sddr55_card_info *info = (struct sddr55_card_info *)extra; | 
 | 768 |  | 
 | 769 | 	if (!extra) | 
 | 770 | 		return; | 
 | 771 |  | 
| Jesper Juhl | 1bc3c9e | 2005-04-18 17:39:34 -0700 | [diff] [blame] | 772 | 	kfree(info->lba_to_pba); | 
 | 773 | 	kfree(info->pba_to_lba); | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 774 | } | 
 | 775 |  | 
 | 776 |  | 
 | 777 | /* | 
 | 778 |  * Transport for the Sandisk SDDR-55 | 
 | 779 |  */ | 
| Alan Stern | 70fcc00 | 2009-02-12 14:47:59 -0500 | [diff] [blame] | 780 | static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 781 | { | 
 | 782 | 	int result; | 
 | 783 | 	static unsigned char inquiry_response[8] = { | 
 | 784 | 		0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00 | 
 | 785 | 	}; | 
 | 786 |  	// write-protected for now, no block descriptor support | 
 | 787 | 	static unsigned char mode_page_01[20] = { | 
 | 788 | 		0x0, 0x12, 0x00, 0x80, 0x0, 0x0, 0x0, 0x0, | 
 | 789 | 		0x01, 0x0A, | 
 | 790 | 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | 
 | 791 | 	}; | 
 | 792 | 	unsigned char *ptr = us->iobuf; | 
 | 793 | 	unsigned long capacity; | 
 | 794 | 	unsigned int lba; | 
 | 795 | 	unsigned int pba; | 
 | 796 | 	unsigned int page; | 
 | 797 | 	unsigned short pages; | 
 | 798 | 	struct sddr55_card_info *info; | 
 | 799 |  | 
 | 800 | 	if (!us->extra) { | 
| Oliver Neukum | 887c256 | 2006-01-08 12:33:45 +0100 | [diff] [blame] | 801 | 		us->extra = kzalloc( | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 802 | 			sizeof(struct sddr55_card_info), GFP_NOIO); | 
 | 803 | 		if (!us->extra) | 
 | 804 | 			return USB_STOR_TRANSPORT_ERROR; | 
| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 805 | 		us->extra_destructor = sddr55_card_info_destructor; | 
 | 806 | 	} | 
 | 807 |  | 
 | 808 | 	info = (struct sddr55_card_info *)(us->extra); | 
 | 809 |  | 
 | 810 | 	if (srb->cmnd[0] == REQUEST_SENSE) { | 
 | 811 | 		US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]); | 
 | 812 |  | 
 | 813 | 		memcpy (ptr, info->sense_data, sizeof info->sense_data); | 
 | 814 | 		ptr[0] = 0x70; | 
 | 815 | 		ptr[7] = 11; | 
 | 816 | 		usb_stor_set_xfer_buf (ptr, sizeof info->sense_data, srb); | 
 | 817 | 		memset (info->sense_data, 0, sizeof info->sense_data); | 
 | 818 |  | 
 | 819 | 		return USB_STOR_TRANSPORT_GOOD; | 
 | 820 | 	} | 
 | 821 |  | 
 | 822 | 	memset (info->sense_data, 0, sizeof info->sense_data); | 
 | 823 |  | 
 | 824 | 	/* Dummy up a response for INQUIRY since SDDR55 doesn't | 
 | 825 | 	   respond to INQUIRY commands */ | 
 | 826 |  | 
 | 827 | 	if (srb->cmnd[0] == INQUIRY) { | 
 | 828 | 		memcpy(ptr, inquiry_response, 8); | 
 | 829 | 		fill_inquiry_response(us, ptr, 36); | 
 | 830 | 		return USB_STOR_TRANSPORT_GOOD; | 
 | 831 | 	} | 
 | 832 |  | 
 | 833 | 	/* only check card status if the map isn't allocated, ie no card seen yet | 
 | 834 | 	 * or if it's been over half a second since we last accessed it | 
 | 835 | 	 */ | 
 | 836 | 	if (info->lba_to_pba == NULL || time_after(jiffies, info->last_access + HZ/2)) { | 
 | 837 |  | 
 | 838 | 		/* check to see if a card is fitted */ | 
 | 839 | 		result = sddr55_status (us); | 
 | 840 | 		if (result) { | 
 | 841 | 			result = sddr55_status (us); | 
 | 842 | 			if (!result) { | 
 | 843 | 			set_sense_info (6, 0x28, 0);	/* new media, set unit attention, not ready to ready */ | 
 | 844 | 			} | 
 | 845 | 			return USB_STOR_TRANSPORT_FAILED; | 
 | 846 | 		} | 
 | 847 | 	} | 
 | 848 |  | 
 | 849 | 	/* if we detected a problem with the map when writing, | 
 | 850 | 	   don't allow any more access */ | 
 | 851 | 	if (info->fatal_error) { | 
 | 852 |  | 
 | 853 | 		set_sense_info (3, 0x31, 0); | 
 | 854 | 		return USB_STOR_TRANSPORT_FAILED; | 
 | 855 | 	} | 
 | 856 |  | 
 | 857 | 	if (srb->cmnd[0] == READ_CAPACITY) { | 
 | 858 |  | 
 | 859 | 		capacity = sddr55_get_capacity(us); | 
 | 860 |  | 
 | 861 | 		if (!capacity) { | 
 | 862 | 			set_sense_info (3, 0x30, 0); /* incompatible medium */ | 
 | 863 | 			return USB_STOR_TRANSPORT_FAILED; | 
 | 864 | 		} | 
 | 865 |  | 
 | 866 | 		info->capacity = capacity; | 
 | 867 |  | 
 | 868 | 		/* figure out the maximum logical block number, allowing for | 
 | 869 | 		 * the fact that only 250 out of every 256 are used */ | 
 | 870 | 		info->max_log_blks = ((info->capacity >> (info->pageshift + info->blockshift)) / 256) * 250; | 
 | 871 |  | 
 | 872 | 		/* Last page in the card, adjust as we only use 250 out of | 
 | 873 | 		 * every 256 pages */ | 
 | 874 | 		capacity = (capacity / 256) * 250; | 
 | 875 |  | 
 | 876 | 		capacity /= PAGESIZE; | 
 | 877 | 		capacity--; | 
 | 878 |  | 
 | 879 | 		((__be32 *) ptr)[0] = cpu_to_be32(capacity); | 
 | 880 | 		((__be32 *) ptr)[1] = cpu_to_be32(PAGESIZE); | 
 | 881 | 		usb_stor_set_xfer_buf(ptr, 8, srb); | 
 | 882 |  | 
 | 883 | 		sddr55_read_map(us); | 
 | 884 |  | 
 | 885 | 		return USB_STOR_TRANSPORT_GOOD; | 
 | 886 | 	} | 
 | 887 |  | 
 | 888 | 	if (srb->cmnd[0] == MODE_SENSE_10) { | 
 | 889 |  | 
 | 890 | 		memcpy(ptr, mode_page_01, sizeof mode_page_01); | 
 | 891 | 		ptr[3] = (info->read_only || info->force_read_only) ? 0x80 : 0; | 
 | 892 | 		usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); | 
 | 893 |  | 
 | 894 | 		if ( (srb->cmnd[2] & 0x3F) == 0x01 ) { | 
 | 895 | 			US_DEBUGP( | 
 | 896 | 			  "SDDR55: Dummy up request for mode page 1\n"); | 
 | 897 | 			return USB_STOR_TRANSPORT_GOOD; | 
 | 898 |  | 
 | 899 | 		} else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) { | 
 | 900 | 			US_DEBUGP( | 
 | 901 | 			  "SDDR55: Dummy up request for all mode pages\n"); | 
 | 902 | 			return USB_STOR_TRANSPORT_GOOD; | 
 | 903 | 		} | 
 | 904 |  | 
 | 905 | 		set_sense_info (5, 0x24, 0);	/* invalid field in command */ | 
 | 906 | 		return USB_STOR_TRANSPORT_FAILED; | 
 | 907 | 	} | 
 | 908 |  | 
 | 909 | 	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { | 
 | 910 |  | 
 | 911 | 		US_DEBUGP( | 
 | 912 | 		  "SDDR55: %s medium removal. Not that I can do" | 
 | 913 | 		  " anything about it...\n", | 
 | 914 | 		  (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); | 
 | 915 |  | 
 | 916 | 		return USB_STOR_TRANSPORT_GOOD; | 
 | 917 |  | 
 | 918 | 	} | 
 | 919 |  | 
 | 920 | 	if (srb->cmnd[0] == READ_10 || srb->cmnd[0] == WRITE_10) { | 
 | 921 |  | 
 | 922 | 		page = short_pack(srb->cmnd[3], srb->cmnd[2]); | 
 | 923 | 		page <<= 16; | 
 | 924 | 		page |= short_pack(srb->cmnd[5], srb->cmnd[4]); | 
 | 925 | 		pages = short_pack(srb->cmnd[8], srb->cmnd[7]); | 
 | 926 |  | 
 | 927 | 		page <<= info->smallpageshift; | 
 | 928 |  | 
 | 929 | 		// convert page to block and page-within-block | 
 | 930 |  | 
 | 931 | 		lba = page >> info->blockshift; | 
 | 932 | 		page = page & info->blockmask; | 
 | 933 |  | 
 | 934 | 		// locate physical block corresponding to logical block | 
 | 935 |  | 
 | 936 | 		if (lba >= info->max_log_blks) { | 
 | 937 |  | 
 | 938 | 			US_DEBUGP("Error: Requested LBA %04X exceeds maximum " | 
 | 939 | 			  "block %04X\n", lba, info->max_log_blks-1); | 
 | 940 |  | 
 | 941 | 			set_sense_info (5, 0x24, 0);	/* invalid field in command */ | 
 | 942 |  | 
 | 943 | 			return USB_STOR_TRANSPORT_FAILED; | 
 | 944 | 		} | 
 | 945 |  | 
 | 946 | 		pba = info->lba_to_pba[lba]; | 
 | 947 |  | 
 | 948 | 		if (srb->cmnd[0] == WRITE_10) { | 
 | 949 | 			US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X" | 
 | 950 | 				" pages %d\n", | 
 | 951 | 				pba, lba, page, pages); | 
 | 952 |  | 
 | 953 | 			return sddr55_write_data(us, lba, page, pages); | 
 | 954 | 		} else { | 
 | 955 | 			US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X" | 
 | 956 | 				" pages %d\n", | 
 | 957 | 				pba, lba, page, pages); | 
 | 958 |  | 
 | 959 | 			return sddr55_read_data(us, lba, page, pages); | 
 | 960 | 		} | 
 | 961 | 	} | 
 | 962 |  | 
 | 963 |  | 
 | 964 | 	if (srb->cmnd[0] == TEST_UNIT_READY) { | 
 | 965 | 		return USB_STOR_TRANSPORT_GOOD; | 
 | 966 | 	} | 
 | 967 |  | 
 | 968 | 	if (srb->cmnd[0] == START_STOP) { | 
 | 969 | 		return USB_STOR_TRANSPORT_GOOD; | 
 | 970 | 	} | 
 | 971 |  | 
 | 972 | 	set_sense_info (5, 0x20, 0);	/* illegal command */ | 
 | 973 |  | 
 | 974 | 	return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? | 
 | 975 | } | 
 | 976 |  | 
| Alan Stern | 70fcc00 | 2009-02-12 14:47:59 -0500 | [diff] [blame] | 977 |  | 
 | 978 | static int sddr55_probe(struct usb_interface *intf, | 
 | 979 | 			 const struct usb_device_id *id) | 
 | 980 | { | 
 | 981 | 	struct us_data *us; | 
 | 982 | 	int result; | 
 | 983 |  | 
 | 984 | 	result = usb_stor_probe1(&us, intf, id, | 
 | 985 | 			(id - sddr55_usb_ids) + sddr55_unusual_dev_list); | 
 | 986 | 	if (result) | 
 | 987 | 		return result; | 
 | 988 |  | 
 | 989 | 	us->transport_name = "SDDR55"; | 
 | 990 | 	us->transport = sddr55_transport; | 
 | 991 | 	us->transport_reset = sddr55_reset; | 
 | 992 | 	us->max_lun = 0; | 
 | 993 |  | 
 | 994 | 	result = usb_stor_probe2(us); | 
 | 995 | 	return result; | 
 | 996 | } | 
 | 997 |  | 
 | 998 | static struct usb_driver sddr55_driver = { | 
 | 999 | 	.name =		"ums-sddr55", | 
 | 1000 | 	.probe =	sddr55_probe, | 
 | 1001 | 	.disconnect =	usb_stor_disconnect, | 
 | 1002 | 	.suspend =	usb_stor_suspend, | 
 | 1003 | 	.resume =	usb_stor_resume, | 
 | 1004 | 	.reset_resume =	usb_stor_reset_resume, | 
 | 1005 | 	.pre_reset =	usb_stor_pre_reset, | 
 | 1006 | 	.post_reset =	usb_stor_post_reset, | 
 | 1007 | 	.id_table =	sddr55_usb_ids, | 
 | 1008 | 	.soft_unbind =	1, | 
 | 1009 | }; | 
 | 1010 |  | 
 | 1011 | static int __init sddr55_init(void) | 
 | 1012 | { | 
 | 1013 | 	return usb_register(&sddr55_driver); | 
 | 1014 | } | 
 | 1015 |  | 
 | 1016 | static void __exit sddr55_exit(void) | 
 | 1017 | { | 
 | 1018 | 	usb_deregister(&sddr55_driver); | 
 | 1019 | } | 
 | 1020 |  | 
 | 1021 | module_init(sddr55_init); | 
 | 1022 | module_exit(sddr55_exit); |