drivers/ide/q40ide.c

/*
 *  Q40 I/O port IDE Driver
 *
 *     (c) Richard Zidlicky
 *
 *  This file is subject to the terms and conditions of the GNU General Public
 *  License.  See the file COPYING in the main directory of this archive for
 *  more details.
 *
 *
 */

#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/ide.h>

    /*
     *  Bases of the IDE interfaces
     */

#define Q40IDE_NUM_HWIFS	2

#define PCIDE_BASE1	0x1f0
#define PCIDE_BASE2	0x170
#define PCIDE_BASE3	0x1e8
#define PCIDE_BASE4	0x168
#define PCIDE_BASE5	0x1e0
#define PCIDE_BASE6	0x160

static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = {
    PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4  , PCIDE_BASE5,
    PCIDE_BASE6 */
};

static int q40ide_default_irq(unsigned long base)
{
           switch (base) {
	            case 0x1f0: return 14;
		    case 0x170: return 15;
		    case 0x1e8: return 11;
		    default:
			return 0;
	   }
}


/*
 * Addresses are pretranslated for Q40 ISA access.
 */
static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base,
			ide_ack_intr_t *ack_intr,
			int irq)
{
	memset(hw, 0, sizeof(hw_regs_t));
	/* BIG FAT WARNING: 
	   assumption: only DATA port is ever used in 16 bit mode */
	hw->io_ports.data_addr = Q40_ISA_IO_W(base);
	hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1);
	hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2);
	hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3);
	hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4);
	hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5);
	hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6);
	hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7);
	hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206);

	hw->irq = irq;
	hw->ack_intr = ack_intr;

	hw->chipset = ide_generic;
}

static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
			      void *buf, unsigned int len)
{
	unsigned long data_addr = drive->hwif->io_ports.data_addr;

	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
		return insw(data_addr, buf, (len + 1) / 2);

	insw_swapw(data_addr, buf, (len + 1) / 2);
}

static void q40ide_output_data(ide_drive_t *drive, struct request *rq,
			       void *buf, unsigned int len)
{
	unsigned long data_addr = drive->hwif->io_ports.data_addr;

	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
		return outsw(data_addr, buf, (len + 1) / 2);

	outsw_swapw(data_addr, buf, (len + 1) / 2);
}

/* Q40 has a byte-swapped IDE interface */
static const struct ide_tp_ops q40ide_tp_ops = {
	.exec_command		= ide_exec_command,
	.read_status		= ide_read_status,
	.read_altstatus		= ide_read_altstatus,

	.set_irq		= ide_set_irq,

	.tf_load		= ide_tf_load,
	.tf_read		= ide_tf_read,

	.input_data		= q40ide_input_data,
	.output_data		= q40ide_output_data,
};

static const struct ide_port_info q40ide_port_info = {
	.tp_ops			= &q40ide_tp_ops,
	.host_flags		= IDE_HFLAG_NO_DMA,
};

/* 
 * the static array is needed to have the name reported in /proc/ioports,
 * hwif->name unfortunately isn't available yet
 */
static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
	"ide0", "ide1"
};

/*
 *  Probe for Q40 IDE interfaces
 */

static int __init q40ide_init(void)
{
    int i;
    hw_regs_t hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };

    if (!MACH_IS_Q40)
      return -ENODEV;

    printk(KERN_INFO "ide: Q40 IDE controller\n");

    for (i = 0; i < Q40IDE_NUM_HWIFS; i++) {
	const char *name = q40_ide_names[i];

	if (!request_region(pcide_bases[i], 8, name)) {
		printk("could not reserve ports %lx-%lx for %s\n",
		       pcide_bases[i],pcide_bases[i]+8,name);
		continue;
	}
	if (!request_region(pcide_bases[i]+0x206, 1, name)) {
		printk("could not reserve port %lx for %s\n",
		       pcide_bases[i]+0x206,name);
		release_region(pcide_bases[i], 8);
		continue;
	}
	q40_ide_setup_ports(&hw[i], pcide_bases[i], NULL,
			q40ide_default_irq(pcide_bases[i]));

	hws[i] = &hw[i];
    }

    return ide_host_add(&q40ide_port_info, hws, NULL);
}

module_init(q40ide_init);

MODULE_LICENSE("GPL");