)]}'
{
  "log": [
    {
      "commit": "44e1e9f8e70506728b02a18e6d03599a6485d67f",
      "tree": "cb50e9faaf6017d44faf6bd5224e209df42aa9d8",
      "parents": [
        "49dca5aebfdeadd4bf27b6cb4c60392147dc35a4"
      ],
      "author": {
        "name": "Shuah Khan",
        "email": "shuahkhan@gmail.com",
        "time": "Tue May 29 15:07:30 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue May 29 16:22:32 2012 -0700"
      },
      "message": "leds: add new transient trigger for one shot timer activation\n\nThe leds timer trigger does not currently have an interface to activate a\none shot timer.  The current support allows for setting two timers, one\nfor specifying how long a state to be on, and the second for how long the\nstate to be off.  The delay_on value specifies the time period an LED\nshould stay in on state, followed by a delay_off value that specifies how\nlong the LED should stay in off state.  The on and off cycle repeats until\nthe trigger gets deactivated.  There is no provision for one time\nactivation to implement features that require an on or off state to be\nheld just once and then stay in the original state forever.\n\nWithout one shot timer interface, user space can still use timer trigger\nto set a timer to hold a state, however when user space application\ncrashes or goes away without deactivating the timer, the hardware will be\nleft in that state permanently.\n\nAs a specific example of this use-case, let\u0027s look at vibrate feature on\nphones.  Vibrate function on phones is implemented using PWM pins on SoC\nor PMIC.  There is a need to activate one shot timer to control the\nvibrate feature, to prevent user space crashes leaving the phone in\nvibrate mode permanently causing the battery to drain.\n\nThis trigger exports three properties, activate, state, and duration When\ntransient trigger is activated these properties are set to default values.\n\n- duration allows setting timer value in msecs. The initial value is 0.\n- activate allows activating and deactivating the timer specified by\n  duration as needed. The initial and default value is 0.  This will allow\n  duration to be set after trigger activation.\n- state allows user to specify a transient state to be held for the specified\n  duration.\n\nSigned-off-by: Shuah Khan \u003cshuahkhan@gmail.com\u003e\nCc: Jonas Bonn \u003cjonas@southpole.se\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nCc: NeilBrown \u003cneilb@suse.de\u003e\nCc: Bryan Wu \u003cbryan.wu@canonical.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "011af7bc7cd188a0310e2d26cdc2cc5d90148b0c",
      "tree": "3f3aa08b555bdcb4c4dfe6e8d4bec9c4205ccd79",
      "parents": [
        "3b49aacd0e56d5bf1b511f6554f17cd65eb8da64"
      ],
      "author": {
        "name": "Kim, Milo",
        "email": "Milo.Kim@ti.com",
        "time": "Fri Mar 23 15:02:09 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Mar 23 16:58:34 2012 -0700"
      },
      "message": "drivers/leds/leds-lp5521.c: support led pattern data\n\nThe lp5521 has autonomous operation mode without external control.\nUsing lp5521_platform_data, various led patterns can be configurable.\nFor supporting this feature, new functions and device attribute are\nadded.\n\nStructure of lp5521_led_pattern: 3 channels are supported - red, green\nand blue.  Pattern(s) of each channel and numbers of pattern(s) are\ndefined in the pla\u003d tform data.  Pattern data are hexa codes which\ninclude pattern commands such like set pwm, wait, ramp up/down, branch\nand so on.\n\nPattern mode functions:\n * lp5521_clear_program_memory\n\tBefore running new led pattern, program memory should be cleared.\n * lp5521_write_program_memory\n\tPattern data updated in the program memory via the i2c.\n * lp5521_get_pattern\n\tGet pattern from predefined in the platform data.\n * lp5521_run_led_pattern\n\tStop current pattern or run new pattern.\n\tTransition time is required between different operation mode.\n\nDevice attribute - \u0027led_pattern\u0027: To load specific led pattern, new device\nattribute is added.\n\nWhen the lp5521 driver is unloaded, stop current led pattern mode.\n\nDocumentation updated : description about how to define the led patterns\nand example.\n\n[akpm@linux-foundation.org: checkpatch fixes]\nSigned-off-by: Milo(Woogyom) Kim \u003cmilo.kim@ti.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nCc: Arun MURTHY \u003carun.murthy@stericsson.com\u003e\nCc: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "3b49aacd0e56d5bf1b511f6554f17cd65eb8da64",
      "tree": "22da84acf260e760e68006afa03346342a518f84",
      "parents": [
        "5ae4e8a77dc82afcfe8460168ec0b94f4b79a54a"
      ],
      "author": {
        "name": "Kim, Milo",
        "email": "Milo.Kim@ti.com",
        "time": "Fri Mar 23 15:02:08 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Mar 23 16:58:34 2012 -0700"
      },
      "message": "drivers/leds/leds-lp5521.c: add \u0027update_config\u0027 in the lp5521_platform_data\n\nThe value of CONFIG register(Addr 08h) is configurable.  For supporting\nthis feature, update_config is added in the platform data.  If\n\u0027update_config\u0027 is not defined, the default value is \u0027LP5521_PWRSAVE_EN |\nLP5521_CP_MODE_AUTO | LP5521_R_TO_BATT\u0027.\n\nTo define CONFIG register in the platform data, the bit definitions were\nmo\u003d ved to the header file.\n\nDocumentation updated : description about \u0027update_config\u0027 and example.\n\nSigned-off-by: Milo(Woogyom) Kim \u003cmilo.kim@ti.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nCc: Arun MURTHY \u003carun.murthy@stericsson.com\u003e\nCc: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "5ae4e8a77dc82afcfe8460168ec0b94f4b79a54a",
      "tree": "563eb3978832bff9e989b9cc7aa12b3da3f2fa20",
      "parents": [
        "c5bd2a712a0c7299b61b0e02404b1376f794d251"
      ],
      "author": {
        "name": "Kim, Milo",
        "email": "Milo.Kim@ti.com",
        "time": "Fri Mar 23 15:02:08 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Mar 23 16:58:34 2012 -0700"
      },
      "message": "drivers/leds/leds-lp5521.c: add \u0027name\u0027 in the lp5521_led_config\n\nThe name of each led channel can be configurable.  For the compatibility,\nthe name is set to default value(xx:channelN) when \u0027name\u0027 is not defined.\n\nSigned-off-by: Milo(Woogyom) Kim \u003cmilo.kim@ti.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nCc: Arun MURTHY \u003carun.murthy@stericsson.com\u003e\nCc: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "ee31892aaf47f1b5fd1323c9397db5d3f22d8b9e",
      "tree": "621b26de426aefa1e2f882dec05d222dc644a402",
      "parents": [
        "b670722009d52c79aea8ff7ed561365ee21ff58c"
      ],
      "author": {
        "name": "Bryan Wu",
        "email": "bryan.wu@canonical.com",
        "time": "Fri Nov 04 11:22:29 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Nov 04 12:01:48 2011 -0700"
      },
      "message": "Documentation: fix leds-class.txt duplicated word\n\nFix a typo (duplicated word) in Documentation/leds/leds-class.txt\n\nSigned-off-by: Bryan Wu \u003cbryan.wu@canonical.com\u003e\nAcked-by: Richard Purdie \u003crchard.purdie@linuxfoundation.org\u003e\nSigned-off-by: Randy Dunlap \u003crdunlap@xenotime.net\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "9a684e19afc630e0763246ee79c0578c1a8eaee8",
      "tree": "46637b603516deb789051f52a09cdf5830b5ac2a",
      "parents": [
        "9718269a7f5f6f3d723dd34e05269579a3ccfc1e"
      ],
      "author": {
        "name": "Antonio Ospite",
        "email": "ospite@studenti.unina.it",
        "time": "Mon Apr 04 15:08:46 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Mon Apr 04 17:51:47 2011 -0700"
      },
      "message": "Documentation: consolidate leds files to leds/ subdir\n\nleds: move leds-class documentation under the leds/ subdir.\nAdd also a leds/00-INDEX file describing the files under leds/\n\nSigned-off-by: Antonio Ospite \u003cospite@studenti.unina.it\u003e\nAcked-by: Richard Purdie \u003crichard.purdie@linuxfoundation.org\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "5991e154b2d09ad28af9dc7d3226b35dbbc052c3",
      "tree": "ad716cded512e81c2b0a3beacff5dfb2a1f64e0e",
      "parents": [
        "f4920f673c4260de966b5f72c5524de0dabb7ffe"
      ],
      "author": {
        "name": "Samu Onkalo",
        "email": "samu.p.onkalo@nokia.com",
        "time": "Thu Nov 11 14:05:23 2010 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Nov 12 07:55:32 2010 -0800"
      },
      "message": "Documentation: led drivers lp5521 and lp5523\n\nCreate sub directory Documentation/leds and add short documentation for\nLP5521 and LP5523 drivers.\n\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nCc: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    }
  ]
}