)]}'
{
  "log": [
    {
      "commit": "84a442b9a16ee69243ce7fce5d6f6f9c3fbdee68",
      "tree": "332a0c901d8ab2ffb19b8ce14b4b094bf5b08657",
      "parents": [
        "39b6cc668c5ecc66f6f9c9293ffab681cb6f7065",
        "deb88cc3c69975cbd9875ed9fac259b351f6b64d"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sat May 26 12:57:47 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Sat May 26 12:57:47 2012 -0700"
      },
      "message": "Merge tag \u0027dt2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc\n\nPull arm-soc device tree conversions (part 2) from Olof Johansson:\n \"These continue the device tree work from part 1, this set is for the\n  tegra, mxs and imx platforms, all of which have dependencies on clock\n  or pinctrl changes submitted earlier.\"\n\nFix up trivial conflicts due to nearby changes in\ndrivers/{gpio/gpio,i2c/busses/i2c}-mxs.c\n\n* tag \u0027dt2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)\n  ARM: dt: tegra: invert status\u003ddisable vs status\u003dokay\n  ARM: dt: tegra: consistent basic property ordering\n  ARM: dt: tegra: sort nodes based on bus order\n  ARM: dt: tegra: remove duplicate device_type property\n  ARM: dt: tegra: consistenly use lower-case for hex constants\n  ARM: dt: tegra: format regs properties consistently\n  ARM: dt: tegra: gpio comment cleanup\n  ARM: dt: tegra: remove unnecessary unit addresses\n  ARM: dt: tegra: whitespace cleanup\n  ARM: dt: tegra cardhu: fix typo in SDHCI node name\n  ARM: dt: tegra: cardhu: register core regulator tps62361\n  ARM: dt: tegra30.dtsi: Add SMMU node\n  ARM: dt: tegra20.dtsi: Add GART node\n  ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes\n  ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes\n  ARM: dt: tegra: Add device tree support for AHB\n  ARM: dts: enable audio support for imx28-evk\n  ARM: dts: enable i2c device for imx28-evk\n  i2c: mxs: add device tree probe support\n  ARM: dts: enable mmc for imx28-evk\n  ...\n"
    },
    {
      "commit": "785d7fab3eb0c39bcd8086055e7bd144c48158e4",
      "tree": "09acce24a08b86cb4034dd5369dfb1e40a632f65",
      "parents": [
        "ef44180680aafb29f50654f3325cf7791fa5433d"
      ],
      "author": {
        "name": "Dirk Behme",
        "email": "dirk.behme@de.bosch.com",
        "time": "Fri Apr 27 10:15:45 2012 +0200"
      },
      "committer": {
        "name": "Shawn Guo",
        "email": "shawn.guo@linaro.org",
        "time": "Fri May 11 15:17:57 2012 +0800"
      },
      "message": "ARM: imx6: Add UART2 for low-level debug\n\nTo be able to enable early debugging on boards using the UART2 for the\nconsole, add the option for early debugging on UART2.\n\nSigned-off-by: Dirk Behme \u003cdirk.behme@de.bosch.com\u003e\nSigned-off-by: Shawn Guo \u003cshawn.guo@linaro.org\u003e\n"
    },
    {
      "commit": "477099f189101a6675d93782164446015a3633bd",
      "tree": "677b55af560fd901db5c3ab21591eab43cf82b69",
      "parents": [
        "d48b97b403d23f6df0b990cee652bdf9a52337a3"
      ],
      "author": {
        "name": "Uwe Kleine-König",
        "email": "u.kleine-koenig@pengutronix.de",
        "time": "Thu Mar 22 10:29:23 2012 +0100"
      },
      "committer": {
        "name": "Sekhar Nori",
        "email": "nsekhar@ti.com",
        "time": "Wed May 09 17:06:41 2012 +0530"
      },
      "message": "ARM: davinci: implement DEBUG_LL port choice\n\nApart from the necessity to do this change for multi-platform kernels\nthe previous logic depended on the zImage decompressor to write the\nphysical and virtual address to a magic memory location.\nIf the decompressor is unused or not correctly configured for the\ncurrent machid, the addruart macro was an infinite loop. Moreover\ndebugging the early zImage code was not possible either.\n\nSigned-off-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\n[nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch\nerror. Fix debug port choice config dependency for traditional DaVincis.\nModify debug port config names and add help text.]\nSigned-off-by: Sekhar Nori \u003cnsekhar@ti.com\u003e\n"
    },
    {
      "commit": "12679a2d7e3bfbdc7586e3e86d1ca90c46659363",
      "tree": "d9c00f2e599d1c3e04a349229a6a19906d01f99e",
      "parents": [
        "1c036588772d01655d851f75dffc27c971e072e2",
        "b0df89868006517417251e02cc4ce5d4b0165885"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Mar 29 16:53:48 2012 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Mar 29 16:53:48 2012 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.linaro.org/people/rmk/linux-arm\n\nPull more ARM updates from Russell King.\n\nThis got a fair number of conflicts with the \u003casm/system.h\u003e split, but\nalso with some other sparse-irq and header file include cleanups.  They\nall looked pretty trivial, though.\n\n* \u0027for-linus\u0027 of git://git.linaro.org/people/rmk/linux-arm: (59 commits)\n  ARM: fix Kconfig warning for HAVE_BPF_JIT\n  ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds\n  ARM: 7349/1: integrator: convert to sparse irqs\n  ARM: 7259/3: net: JIT compiler for packet filters\n  ARM: 7334/1: add jump label support\n  ARM: 7333/2: jump label: detect %c support for ARM\n  ARM: 7338/1: add support for early console output via semihosting\n  ARM: use set_current_blocked() and block_sigmask()\n  ARM: exec: remove redundant set_fs(USER_DS)\n  ARM: 7332/1: extract out code patch function from kprobes\n  ARM: 7331/1: extract out insn generation code from ftrace\n  ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format\n  ARM: 7351/1: ftrace: remove useless memory checks\n  ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path\n  ARM: Versatile Express: add NO_IOPORT\n  ARM: get rid of asm/irq.h in asm/prom.h\n  ARM: 7319/1: Print debug info for SIGBUS in user faults\n  ARM: 7318/1: gic: refactor irq_start assignment\n  ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop\n  ARM: 7315/1: perf: add support for the Cortex-A7 PMU\n  ...\n"
    },
    {
      "commit": "b0df89868006517417251e02cc4ce5d4b0165885",
      "tree": "6800388c633a13f64fd1f7845ce026ca2606522f",
      "parents": [
        "4ba21e868f4b6e2ce5432055e206edadc6319533",
        "6c634726352f0d796a4b5e6aa9849ee5b45712ce"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Mar 27 11:30:31 2012 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Mar 27 11:30:31 2012 +0100"
      },
      "message": "Merge branch \u0027devel-stable\u0027 into for-linus\n\nConflicts:\n\tarch/arm/Kconfig.debug\n\tarch/arm/plat-versatile/Kconfig\nMerge fixes:\n\tarch/arm/mach-integrator/Kconfig\n\tdrivers/clocksource/Kconfig\n"
    },
    {
      "commit": "9b5a146a43db3733c731d47022f4f5259e6b31e6",
      "tree": "3fc6d02c65c3f373d6408f9c332de183be7230b0",
      "parents": [
        "101d9b0dedbc9e560737d3357104bf09db48eb3e"
      ],
      "author": {
        "name": "Nicolas Pitre",
        "email": "nicolas.pitre@linaro.org",
        "time": "Wed Feb 22 21:58:03 2012 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sat Mar 24 09:38:55 2012 +0000"
      },
      "message": "ARM: 7338/1: add support for early console output via semihosting\n\nThis is a very simple method for code running in an emulator, or under\nthe supervision of a debugger, to use I/O facilities on the controlling\nhost.\n\nTested with OpenOCD, and ARM\u0027s Fast Models.\n\nDetails on semihosting can be found in chapter 8 of\nDUI0203I_rvct_developer_guide.pdf from ARM Ltd.\n\nSigned-off-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "e135e4506c6d3e9b196890877a9a2815f71b04ac",
      "tree": "b4f36fdb126eb35a9c7a5632ad1b628bbf11971d",
      "parents": [
        "ee80285e1b79e6a7a6855c8be65bddc61f4d69be",
        "1aa0cf677949dafaaff8cd1a78f1f69a239138ac"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Tue Feb 28 12:23:22 2012 +0000"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Tue Feb 28 12:23:27 2012 +0000"
      },
      "message": "Merge branch \u0027imx/driver\u0027 of git://git.linaro.org/people/shawnguo/linux-2.6 into next/drivers\n\n* \u0027imx/driver\u0027 of git://git.linaro.org/people/shawnguo/linux-2.6: (3 commits)\n  ARM: imx6q: add cko1 clock\n  ARM: mxc: make imx_dma_is_general_purpose more generic for sdma\n  ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4\n"
    },
    {
      "commit": "cdaf29cfd8d76bc6133b1a1d127d029a966df66c",
      "tree": "282e79363e5ce23a9a66a757c8d8f2e85ff9793b",
      "parents": [
        "6b21d18ed50c7d145220b0724ea7f2613abf0f95"
      ],
      "author": {
        "name": "Dirk Behme",
        "email": "dirk.behme@de.bosch.com",
        "time": "Mon Feb 06 13:19:19 2012 +0100"
      },
      "committer": {
        "name": "Shawn Guo",
        "email": "shawn.guo@linaro.org",
        "time": "Mon Feb 27 15:17:32 2012 +0800"
      },
      "message": "ARM: imx6: Rename DEBUG_IMX6Q_UART to UART4\n\nDifferent boards may use differenct UART ports for debugging.\nTo be able to add different debug UART configurations (e.g. UART2),\nrename the existing general DEBUG_IMX6Q_UART to DEBUG_IMX6Q_UART4.\n\nSigned-off-by: Dirk Behme \u003cdirk.behme@de.bosch.com\u003e\nSigned-off-by: Shawn Guo \u003cshawn.guo@linaro.org\u003e\n"
    },
    {
      "commit": "9918ceafd4a9e013572e03983f528017c29bb1cb",
      "tree": "90d7885b26b87d27ed4cdb4026e608908e8a8a4c",
      "parents": [
        "57225b76864210d667b935c54babf22b6c31336b"
      ],
      "author": {
        "name": "Jean-Christophe PLAGNIOL-VILLARD",
        "email": "plagnioj@jcrosoft.com",
        "time": "Thu Jan 26 14:07:09 2012 +0100"
      },
      "committer": {
        "name": "Nicolas Ferre",
        "email": "nicolas.ferre@atmel.com",
        "time": "Fri Feb 03 13:33:05 2012 +0100"
      },
      "message": "ARM: at91: code removal of CAP9 SoC\n\nFollowing removal announce and addition to feature-removal-schedule.txt,\nhere is the actual source code deletion for Atmel CAP9 family.\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n"
    },
    {
      "commit": "e76f4750f4c06c8b891ae7bc4c10074de08a9d41",
      "tree": "8692ad3a7e496efe3eadf7e866546f4265b47f35",
      "parents": [
        "dcd6c92267155e70a94b3927bce681ce74b80d1f"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Wed Nov 23 17:44:05 2011 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Fri Jan 20 10:50:46 2012 +0000"
      },
      "message": "ARM: debug: arrange Kconfig options more logically\n\nArrange the Kconfig options in rough alphabetical order, and place the\ndefault \u0027none\u0027 and \u0027icedcc\u0027 options at the end.  This prefers the\nplatform specific debug option rather than the \u0027none\u0027 option, which is\nwhat we actually want.\n\nAcked-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "8d685b7f4d9c9882442bf1b492558d5f17b694fa",
      "tree": "fcd2cfc985cad3982b5334f3b57054c7279770bc",
      "parents": [
        "1e81799bd62d42bb6d5ec5c74e9b022e7d44f11c",
        "2b222a2971e4d73fc25c09aeb203c16c0c3c142e"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Thu Dec 01 12:34:21 2011 +0000"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Thu Dec 01 12:34:21 2011 +0000"
      },
      "message": "Merge branches \u0027at91/gpio\u0027, \u0027at91/ioremap\u0027, \u0027drivers/macb-gem-cleanup\u0027 and \u0027msm/misc\u0027 into next/cleanup\n"
    },
    {
      "commit": "13079a733313c00ca92fc6716383dd126caa7276",
      "tree": "8052b91a3f42d8f92f9547ca87cf1555d2f834c9",
      "parents": [
        "c1c30a29df7e47310caa979dc48f715ae478de5f"
      ],
      "author": {
        "name": "Jean-Christophe PLAGNIOL-VILLARD",
        "email": "plagnioj@jcrosoft.com",
        "time": "Wed Nov 02 01:43:31 2011 +0800"
      },
      "committer": {
        "name": "Jean-Christophe PLAGNIOL-VILLARD",
        "email": "plagnioj@jcrosoft.com",
        "time": "Mon Nov 28 22:50:39 2011 +0800"
      },
      "message": "ARM: at91: make DBGU soc independent\n\nwe will select now the DBGU used by the soc at Kconfig level\n\nFor the DEBUG_LL and early_printk this will allow to select which DBGU to use\nthis will also allow to select them when multiple SOC are enabled\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n"
    },
    {
      "commit": "a3d3ef9d4fd57cfd407c8d2d0a7daec000468ebf",
      "tree": "4894c7c2c68b9caa9e6842d317cde4800905e03e",
      "parents": [
        "650e3f0d66ade2a614d854765dae3bbc9a87f58d"
      ],
      "author": {
        "name": "Stephen Boyd",
        "email": "sboyd@codeaurora.org",
        "time": "Tue Nov 08 10:33:04 2011 -0800"
      },
      "committer": {
        "name": "David Brown",
        "email": "davidb@codeaurora.org",
        "time": "Thu Nov 10 10:17:06 2011 -0800"
      },
      "message": "msm: Support DEBUG_LL on MSM8660 and MSM8960\n\nAdd support for DEBUG_LL on the 8660 and 8960 development boards.\nWhile we\u0027re here cleanup the uncompress.h code a bit. Avoid\nthe use of readl/writel as those are Linux specific APIs that\naren\u0027t guaranteed to work in the decompressor.\n\nCc: Nicolas Pitre \u003cnico@fluxnic.net\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nAcked-by: Nicolas Pitre \u003cnico@linaro.org\u003e\nSigned-off-by: David Brown \u003cdavidb@codeaurora.org\u003e\n"
    },
    {
      "commit": "650e3f0d66ade2a614d854765dae3bbc9a87f58d",
      "tree": "d849c9687ae7c9a3afcc9e49444eba167ec16394",
      "parents": [
        "1ea6b8f48918282bdca0b32a34095504ee65bab5"
      ],
      "author": {
        "name": "Stephen Boyd",
        "email": "sboyd@codeaurora.org",
        "time": "Tue Nov 08 10:33:03 2011 -0800"
      },
      "committer": {
        "name": "David Brown",
        "email": "davidb@codeaurora.org",
        "time": "Thu Nov 10 10:17:06 2011 -0800"
      },
      "message": "ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice\n\nNow that DEBUG_LL is a choice we can move MSM\u0027s homegrown choice\nmenu to DEBUG_LL.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nSigned-off-by: David Brown \u003cdavidb@codeaurora.org\u003e\n"
    },
    {
      "commit": "994c0e992522c123298b4a91b72f5e67ba2d1123",
      "tree": "411952f844b8e1d5ef2854e44df793529078d3eb",
      "parents": [
        "367069f16e32e188d4687fe2c3e30f2ca583836f",
        "abc3f126ac736280c68db6472eb0040ddf6e1b1f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Nov 01 21:08:03 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Nov 01 21:08:03 2011 -0700"
      },
      "message": "Merge branch \u0027next/soc\u0027 of git://git.linaro.org/people/arnd/arm-soc\n\n* \u0027next/soc\u0027 of git://git.linaro.org/people/arnd/arm-soc: (21 commits)\n  MAINTAINERS: add ARM/FREESCALE IMX6 entry\n  arm/imx: merge i.MX3 and i.MX6\n  arm/imx6q: add suspend/resume support\n  arm/imx6q: add device tree machine support\n  arm/imx6q: add smp and cpu hotplug support\n  arm/imx6q: add core drivers clock, gpc, mmdc and src\n  arm/imx: add gic_handle_irq function\n  arm/imx6q: add core definitions and low-level debug uart\n  arm/imx6q: add device tree source\n  ARM: highbank: add suspend support\n  ARM: highbank: Add cpu hotplug support\n  ARM: highbank: add SMP support\n  MAINTAINERS: add Calxeda Highbank ARM platform\n  ARM: add Highbank core platform support\n  ARM: highbank: add devicetree source\n  ARM: l2x0: add empty l2x0_of_init\n  picoxcell: add a definition of VMALLOC_END\n  picoxcell: remove custom ioremap implementation\n  picoxcell: add the DTS for the PC7302 board\n  picoxcell: add the DTS for pc3x2 and pc3x3 devices\n  ...\n\nFix up trivial conflicts in arch/arm/Kconfig, and some more header file\nconflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge\nby Arnd).\n"
    },
    {
      "commit": "6585dea1f99cc2265582ff2e4cc1727062136e92",
      "tree": "57378ccfe0f9fde73081e1f9355d05dd4131e178",
      "parents": [
        "16ee792e45cf0c97ce061fce03c36cab5551ec72",
        "97c24c1aa403e0d4ef7c1958db8459e488862b46"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Nov 01 20:34:22 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Nov 01 20:34:22 2011 -0700"
      },
      "message": "Merge branch \u0027next/cross-platform\u0027 of git://git.linaro.org/people/arnd/arm-soc\n\n* \u0027next/cross-platform\u0027 of git://git.linaro.org/people/arnd/arm-soc:\n  arm/imx: use Kconfig choice for low-level debug UART selection\n  ARM: realview: use Kconfig choice for debug UART selection\n  ARM: plat-samsung: use Kconfig choice for debug UART selection\n  ARM: versatile: convert logical CPU numbers to physical numbers\n  ARM: ux500: convert logical CPU numbers to physical numbers\n  ARM: shmobile: convert logical CPU numbers to physical numbers\n  ARM: msm: convert logical CPU numbers to physical numbers\n  ARM: exynos4: convert logical CPU numbers to physical numbers\n\nFix up trivial conflict (config DEBUG_S3C_UART move/split vs addition of\nARM_KPROBES_TEST option) in arch/arm/Kconfig.debug\n"
    },
    {
      "commit": "abc3f126ac736280c68db6472eb0040ddf6e1b1f",
      "tree": "4e3333cde6da6c49dcd81920410bf5a33055f03a",
      "parents": [
        "b8df0ea26ac17c9a073f235c7fdfbdd1851b59ea",
        "8bcb97659656042f3132b2814b19709856aa1335"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Wed Nov 02 02:46:55 2011 +0100"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Wed Nov 02 02:46:55 2011 +0100"
      },
      "message": "Merge branch \u0027imx/imx6q\u0027 into next/soc\n\nConflicts:\n\tDocumentation/devicetree/bindings/arm/fsl.txt\n\tarch/arm/Kconfig\n\tarch/arm/Kconfig.debug\n\tarch/arm/plat-mxc/include/mach/common.h\n"
    },
    {
      "commit": "bac89d754ba333453576fd38eb6073d7f89818fe",
      "tree": "b53d79778a231d9cb62cacd97910e03ac93da921",
      "parents": [
        "7d740f87fd0741c00231a4b13074660d526d5630"
      ],
      "author": {
        "name": "Shawn Guo",
        "email": "shawn.guo@linaro.org",
        "time": "Sun Oct 02 15:09:11 2011 +0800"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:26:21 2011 +0100"
      },
      "message": "arm/imx6q: add core definitions and low-level debug uart\n\nIt adds the core definitions and low-level debug uart support\nfor imx6q.\n\nSigned-off-by: Shawn Guo \u003cshawn.guo@linaro.org\u003e\n"
    },
    {
      "commit": "ccfa8b21f20099b950b4f2f75d2330fb149a2012",
      "tree": "60380e1417830f50683c3945e2fb9ee110418cbb",
      "parents": [
        "7e0cac630c7c90f12a78131df9913657fa30243b",
        "f350b86121c7a004a5f866333fa1d23fe30263a6"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:24:41 2011 +0100"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:24:41 2011 +0100"
      },
      "message": "Merge branch \u0027cross-platform/debug_ll\u0027 into imx/imx6q\n\nConflicts:\n\tarch/arm/Kconfig.debug\n"
    },
    {
      "commit": "929f58aeeb46f964d9468ce1addd993f5d92b11d",
      "tree": "95355731bd4d21d221cdc2a5ab073244ff76db65",
      "parents": [
        "fcd467137ea2da46ffe5cbfdb42e8a2b35f13dad",
        "a26bce1220a4c5a7a074a779e6aad3cae63a94f7"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:23:28 2011 +0100"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:23:28 2011 +0100"
      },
      "message": "Merge branch \u0027depends/rmk/devel-stable\u0027 into imx/imx6q\n"
    },
    {
      "commit": "220e6cf7b793d702596506a8c4bf1f4fd4040df1",
      "tree": "ba9f94611ca71799e67a66555c5124a0be975920",
      "parents": [
        "253d7addbcb06acc90eb722f122d32a6ccbf67a7"
      ],
      "author": {
        "name": "Rob Herring",
        "email": "rob.herring@calxeda.com",
        "time": "Tue Jun 07 10:02:55 2011 -0500"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:14:00 2011 +0100"
      },
      "message": "ARM: add Highbank core platform support\n\nThis adds basic support for the Calxeda Highbank platform.\n\nSigned-off-by: Rob Herring \u003crob.herring@calxeda.com\u003e\nReviewed-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nReviewed-by: Shawn Guo \u003cshawn.guo@linaro.org\u003e\n"
    },
    {
      "commit": "09fa31a322c8f03871a741cd1d26e5ca04aacbbd",
      "tree": "acdad13d7c332978a91231c4f34b6320a1c7ceb6",
      "parents": [
        "2b228e8cf33dbdd323dd4a05a973c6bd45c44133",
        "f37a53cc5d8a8fb199e41386d125d8c2ed9e54ef"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:11:34 2011 +0100"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Mon Oct 31 14:11:34 2011 +0100"
      },
      "message": "Merge branch \u0027dt/gic\u0027 into highbank/soc\n\nConflicts:\n\tarch/arm/Kconfig\n"
    },
    {
      "commit": "1fdb24e969110fafea36d3b393bea438f702c87f",
      "tree": "47a1dfef8a259e7922285315f8a02d31b4efe2f1",
      "parents": [
        "f362f98e7c445643d27c610bb7a86b79727b592e",
        "531a6a941745e1e045dd2a6bd09e1dc01247a5f3"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 12:02:27 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Oct 28 12:02:27 2011 -0700"
      },
      "message": "Merge branch \u0027devel-stable\u0027 of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm\n\n* \u0027devel-stable\u0027 of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits)\n  ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET\n  ARM: gic, local timers: use the request_percpu_irq() interface\n  ARM: gic: consolidate PPI handling\n  ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H\n  ARM: mach-s5p64x0: remove mach/memory.h\n  ARM: mach-s3c64xx: remove mach/memory.h\n  ARM: plat-mxc: remove mach/memory.h\n  ARM: mach-prima2: remove mach/memory.h\n  ARM: mach-zynq: remove mach/memory.h\n  ARM: mach-bcmring: remove mach/memory.h\n  ARM: mach-davinci: remove mach/memory.h\n  ARM: mach-pxa: remove mach/memory.h\n  ARM: mach-ixp4xx: remove mach/memory.h\n  ARM: mach-h720x: remove mach/memory.h\n  ARM: mach-vt8500: remove mach/memory.h\n  ARM: mach-s5pc100: remove mach/memory.h\n  ARM: mach-tegra: remove mach/memory.h\n  ARM: plat-tcc: remove mach/memory.h\n  ARM: mach-mmp: remove mach/memory.h\n  ARM: mach-cns3xxx: remove mach/memory.h\n  ...\n\nFix up mostly pretty trivial conflicts in:\n - arch/arm/Kconfig\n - arch/arm/include/asm/localtimer.h\n - arch/arm/kernel/Makefile\n - arch/arm/mach-shmobile/board-ap4evb.c\n - arch/arm/mach-u300/core.c\n - arch/arm/mm/dma-mapping.c\n - arch/arm/mm/proc-v7.S\n - arch/arm/plat-omap/Kconfig\nlargely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -\u003e\nCONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and\naddition of NEED_MACH_MEMORY_H next to HAVE_IDE.\n"
    },
    {
      "commit": "06afb1a087d49ae0f676b2e5b9ffe5f4b3aba355",
      "tree": "5377c063ed07aed23eb9da0bfecfca307f8da0bc",
      "parents": [
        "c3b92c8787367a8bb53d57d9789b558f1295cc96",
        "7816e210a7e4681fb775bbb57bffbef3cc4aa456",
        "f73765fcb8bb79e80af58059441eb931679e68c0",
        "70e5f5efcc933af55a3a18efdb3b2edd3eb510ec",
        "91c2ebb90b1890abc648ba9dec5608cbc97e1cb9",
        "daece59689e76ed55d8863cae04993679a8e844e",
        "d7c5d0dcffb3b5702d9477faceff4b8398e6fed0",
        "a06f916b7a9b57447ceb875eb0a89f1a66b31bca"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Oct 25 08:19:29 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Oct 25 08:19:29 2011 +0100"
      },
      "message": "Merge branches \u0027arnd-randcfg-fixes\u0027, \u0027debug\u0027, \u0027io\u0027 (early part), \u0027l2x0\u0027, \u0027p2v\u0027, \u0027pgt\u0027 (early part) and \u0027smp\u0027 into for-linus\n"
    },
    {
      "commit": "f350b86121c7a004a5f866333fa1d23fe30263a6",
      "tree": "9b8dc0312aaef46faf84f723c7412095dca13326",
      "parents": [
        "1285b8f89a0553695f4ff5f167d8b4afe91af906"
      ],
      "author": {
        "name": "Shawn Guo",
        "email": "shawn.guo@linaro.org",
        "time": "Fri Aug 19 05:56:59 2011 +0100"
      },
      "committer": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Mon Oct 17 10:02:52 2011 +0100"
      },
      "message": "arm/imx: use Kconfig choice for low-level debug UART selection\n\nNow that the DEBUG_LL UART can be selected by a Kconfig choice,\nsimplify the #ifdefery in debug-macro.S and add entries to the\ntop-level Kconfig.debug instead.\n\nSigned-off-by: Shawn Guo \u003cshawn.guo@linaro.org\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\n"
    },
    {
      "commit": "1285b8f89a0553695f4ff5f167d8b4afe91af906",
      "tree": "9991d6413e64e3251557c2bd81c9ccc9454af58b",
      "parents": [
        "952aeeb2880a6fd14e15a0dc402a3ffd25f8e689"
      ],
      "author": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Tue Aug 16 22:30:28 2011 +0100"
      },
      "committer": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Mon Oct 17 10:02:52 2011 +0100"
      },
      "message": "ARM: realview: use Kconfig choice for debug UART selection\n\nNow that the DEBUG_LL UART can be selected by a Kconfig choice, simplify\nthe #ifdefery in debug-macro.S and add entries to the top-level\nKconfig.debug instead.\n\nAcked-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\n"
    },
    {
      "commit": "952aeeb2880a6fd14e15a0dc402a3ffd25f8e689",
      "tree": "8c9194d5ad0283e890f911e3cd02c2c46f43b2d6",
      "parents": [
        "f73765fcb8bb79e80af58059441eb931679e68c0"
      ],
      "author": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Tue Aug 16 22:28:54 2011 +0100"
      },
      "committer": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Mon Oct 17 10:02:52 2011 +0100"
      },
      "message": "ARM: plat-samsung: use Kconfig choice for debug UART selection\n\nNow that the DEBUG_LL UART can be selected by a Kconfig choice, convert\nthe Samsung UART selection to use a set of bools rather than an int.\n\nAcked-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\n"
    },
    {
      "commit": "f73765fcb8bb79e80af58059441eb931679e68c0",
      "tree": "80ccf1b56155904432390b00e4a0870b511547cc",
      "parents": [
        "6996f425e57d58a6f1884b7fd4bfc3ed3dd10c2d"
      ],
      "author": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Mon Oct 03 18:29:03 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:03:03 2011 +0100"
      },
      "message": "ARM: 7116/1: debug: provide dummy default option for DEBUG_LL UART choice\n\nDefaulting to DEBUG_ICEDCC will cause systems to hang during boot unless\na hardware debugger is listening to the debug comms. channel.\n\nThis patch adds a dummy UART option as the default DEBUG_LL choice which\nrequires the platform to do the right thing.\n\nAcked-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nTested-by: Marc Zyngier \u003cmarc.zyngier@arm.com\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "6996f425e57d58a6f1884b7fd4bfc3ed3dd10c2d",
      "tree": "ff6d3c5bf4da87f06881432ac5b7c8de3777e0f7",
      "parents": [
        "164acf96a979deae3cf04f8eebcc66567fb8a520"
      ],
      "author": {
        "name": "Stephen Boyd",
        "email": "sboyd@codeaurora.org",
        "time": "Thu Sep 22 20:28:36 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:03:03 2011 +0100"
      },
      "message": "ARM: 7097/1: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice\n\nDEBUG_ICEDCC support is just another DEBUG_LL choice and\nselecting it along with other DEBUG_LL options doesn\u0027t make\nmuch sense. Put it into the DEBUG_LL choice to avoid confusion.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nAcked-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "164acf96a979deae3cf04f8eebcc66567fb8a520",
      "tree": "df0d1c69bb8c7cbf22ebaea34f41d9a3b30437ef",
      "parents": [
        "4f5ef9226afab7c9920f1e6c560f046f6aaba89c"
      ],
      "author": {
        "name": "Stephen Boyd",
        "email": "sboyd@codeaurora.org",
        "time": "Thu Sep 22 20:28:35 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:03:03 2011 +0100"
      },
      "message": "ARM: 7096/1: debug: Add UART1 config choices\n\nARM patch 7072/1 (debug: use kconfig choice for selecting\nDEBUG_LL UART) didn\u0027t notice that the Kconfigs relied on being\nunselected to configure a different serial port. Since there is\nno NONE option in a choice menu, explicitly add the other option\nso that both serial ports can be selected.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nAcked-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "4f5ef9226afab7c9920f1e6c560f046f6aaba89c",
      "tree": "ad8f15a9c1ecbad8a7a4e1127b18e2998cbec872",
      "parents": [
        "17916b284e6afea210484e4c2688debb8c9641c2"
      ],
      "author": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Thu Sep 01 19:04:44 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:03:03 2011 +0100"
      },
      "message": "ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour\n\nEnabled DEBUG_LL hardcodes the UART address into the kernel and results\nin a non-portable kernel image. Since this option is only intended for\nuse when debugging early boot failures, supporting multiple platforms\nin such a configuration is not the intended use-case.\n\nThis patch documents this limitation in the DEBUG_LL Kconfig help text,\nso that users are aware of the portability restrictions that are associated\nwith enabling low-level debugging support.\n\nReported-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "17916b284e6afea210484e4c2688debb8c9641c2",
      "tree": "87a508ef18008e96239b2208bf00d9d41beec1f2",
      "parents": [
        "d0a77454c70d0449a5f87087deb8f0cb15145e90"
      ],
      "author": {
        "name": "Will Deacon",
        "email": "will.deacon@arm.com",
        "time": "Thu Sep 01 18:58:51 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Mon Oct 17 09:03:03 2011 +0100"
      },
      "message": "ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART\n\nEnabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires\nthe debug UART address into the kernel, so that we can print before the\nplatform is initialised.\n\nIf the user inadvertently selects multiple platforms with DEBUG_LL\nenabled, the UART address may not be correct and will likely cause the\nkernel to hang in the very early stages of boot.\n\nThis patch, based on a skeleton from Russell, uses a Kconfig choice for\nselecting the DEBUG_LL UART, therefore allowing the user to make a\nchoice about the supported platform when DEBUG_LL is enabled.\n\nAcked-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\nSigned-off-by: Will Deacon \u003cwill.deacon@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "53eebb0df85e4005006920ae12150e8d6d31b132",
      "tree": "dda550d7f7a3602ae107c8b20705d4496241bc6b",
      "parents": [
        "b214bea525c5b62f6f8984557022e4593c441205"
      ],
      "author": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Wed Sep 07 10:02:35 2011 +0200"
      },
      "committer": {
        "name": "Arnd Bergmann",
        "email": "arnd@arndb.de",
        "time": "Sat Oct 01 21:11:29 2011 +0200"
      },
      "message": "ARM: OC_ETM should not select ARM_AMBA\n\nThe CONFIG_ARM_AMBA symbol is selected by the platforms that support\nAMBA, and the other platforms (e.g. orion) might not be able to\nbuild that code at all when they do not support the clk API.\n\nInstead, make sure that OC_ETM is only built on platforms that\ndo support the amba subsystem already.\n\nSigned-off-by: Arnd Bergmann \u003carnd@arndb.de\u003e\n"
    },
    {
      "commit": "4189bc71ff2cd3c1920b69a01f6796caf3f1edb3",
      "tree": "e99982bcfecbb24881db5833d0cf512736a9459b",
      "parents": [
        "b6fd41e29dea9c6753b1843a77e50433e6123bcb"
      ],
      "author": {
        "name": "Jon Medhurst",
        "email": "tixy@yxit.co.uk",
        "time": "Sat Aug 27 12:36:58 2011 +0100"
      },
      "committer": {
        "name": "Jon Medhurst",
        "email": "tixy@yxit.co.uk",
        "time": "Tue Sep 20 18:17:42 2011 +0000"
      },
      "message": "ARM: kprobes: Add config option for selecting the ARM kprobes tests\n\nSigned-off-by: Jon Medhurst \u003ctixy@yxit.co.uk\u003e\nAcked-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\n"
    },
    {
      "commit": "5ca43f6c3b365024d889bc77064bb331f5a72a45",
      "tree": "c22cf20dc33d85770b88c117fd67b33c7bd7099d",
      "parents": [
        "c84598bbfa756b7d042da31aa4e198ae866a6c7d"
      ],
      "author": {
        "name": "Stephen Boyd",
        "email": "sboyd@codeaurora.org",
        "time": "Tue May 24 17:13:36 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed May 25 08:39:54 2011 -0700"
      },
      "message": "lib: consolidate DEBUG_STACK_USAGE option\n\nMost arches define CONFIG_DEBUG_STACK_USAGE exactly the same way.  Move it\nto lib/Kconfig.debug so each arch doesn\u0027t have to define it.  This\nobviously makes the option generic, but that\u0027s fine because the config is\nalready used in generic code.\n\nIt\u0027s not obvious to me that sysrq-P actually does anything caution by\nkeeping the most inclusive wording.\n\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nCc: Chris Metcalf \u003ccmetcalf@tilera.com\u003e\nAcked-by: David S. Miller \u003cdavem@davemloft.net\u003e\nAcked-by: Richard Weinberger \u003crichard@nod.at\u003e\nAcked-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nCc: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nAcked-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nCc: Paul Mackerras \u003cpaulus@samba.org\u003e\nAcked-by: Benjamin Herrenschmidt \u003cbenh@kernel.crashing.org\u003e\nCc: Chen Liqin \u003cliqin.chen@sunplusct.com\u003e\nCc: Lennox Wu \u003clennox.wu@gmail.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: \"H. Peter Anvin\" \u003chpa@zytor.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "b025a3f836d1e8785ae65b59282a4befef9892bb",
      "tree": "9b608de1a99181bc70a29a2865517fd949a828b6",
      "parents": [
        "a84bd2ee81ea1bdbd238cd1c380ec25f50a876c5"
      ],
      "author": {
        "name": "Stephen Boyd",
        "email": "sboyd@codeaurora.org",
        "time": "Mon Apr 11 19:06:26 2011 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Apr 14 09:15:24 2011 +0100"
      },
      "message": "ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS\n\nThis config option isn\u0027t actually used anywhere and can be safely\nremoved. The last user was traps.c before commit 082f47a ([ARM]\nalways allow dump_stack() to produce a backtrace, 2007-07-05).\n\nReviewed-by: Jesper Juhl \u003cjj@chaosbits.net\u003e\nSigned-off-by: Stephen Boyd \u003csboyd@codeaurora.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "4073723acb9cdcdbe4df9c0e0c376c65d1697e43",
      "tree": "f41c17eac157b1223ce104845cf9b1e5a9e6a83d",
      "parents": [
        "58daf18cdcab550262a5f4681e1f1e073e21965a",
        "4ec3eb13634529c0bc7466658d84d0bbe3244aea"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Jan 06 22:32:52 2011 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Jan 06 22:32:52 2011 +0000"
      },
      "message": "Merge branch \u0027misc\u0027 into devel\n\nConflicts:\n\tarch/arm/Kconfig\n\tarch/arm/common/Makefile\n\tarch/arm/kernel/Makefile\n\tarch/arm/kernel/smp.c\n"
    },
    {
      "commit": "4a50bfe365a977f634311504484342fbfffe855c",
      "tree": "bbe92d0aef2062feea7ea26d46d409e16aaf2669",
      "parents": [
        "0385ebc0c9b16fc2d8262c082843165313f7b1e4"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Dec 05 23:06:22 2010 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Dec 05 23:06:22 2010 +0000"
      },
      "message": "ARM: Ensure experimental options are so marked\n\nIt is kernel-wide policy that options depending on EXPERIMENTAL should\nalso have \u0027(EXPERIMENTAL)\u0027 in their option text, and options with\n\u0027(EXPERIMENTAL)\u0027 depend on EXPERIMENTAL.\n\nEnsure that all ARM options comply with this.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "0e341af835fdf553820a1fa98341b93ab32ce466",
      "tree": "633b4088fdf119931a5a3039e6b83bc1b9245a42",
      "parents": [
        "dd686eb13959e49a1112fd608c124ab711050582"
      ],
      "author": {
        "name": "Rabin Vincent",
        "email": "rabin@rab.in",
        "time": "Sat Nov 06 23:03:53 2010 +0530"
      },
      "committer": {
        "name": "Rabin Vincent",
        "email": "rabin@rab.in",
        "time": "Fri Nov 19 21:43:28 2010 +0530"
      },
      "message": "ARM: ftrace: enable function graph tracer\n\nAdd the options to enable the function graph tracer on ARM.  Function\ngraph tracer support requires frame pointers, so exclude Thumb-2 and\nalso make sure FRAME_POINTER gets enabled when FUNCTION_GRAPH_TRACER is\nused, since FUNCTION_TRACER doesn\u0027t \"select FRAME_POINTER\" when\nARM_UNWIND is used.  Therefore, with GCC 4.4.0+, you get plain function\ntracing without frame pointers, but you\u0027ll need them if you want\nfunction graph tracing.\n\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSigned-off-by: Rabin Vincent \u003crabin@rab.in\u003e\n"
    },
    {
      "commit": "809b4e00baf006a990a73329ba381d536c6fa277",
      "tree": "e949e0efd019d6f932537aba762792b07a84351c",
      "parents": [
        "a0a55682b83fd5f012afadcf415b030d7424ae68",
        "79a94c3538bda6869d7bb150b5e02dd3a72314dd"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Oct 19 22:06:36 2010 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Tue Oct 19 22:06:36 2010 +0100"
      },
      "message": "Merge branch \u0027devel-stable\u0027 into devel\n"
    },
    {
      "commit": "087aaffcdf9c91667c93923fbc05fa8fb6bc7d3a",
      "tree": "ec94d9fd07baa4802ff0a3a2811ef3c3e1c7f3f3",
      "parents": [
        "7c63984b86f96c71c541132c74c4b56fe2a13e1a"
      ],
      "author": {
        "name": "Nicolas Pitre",
        "email": "nico@fluxnic.net",
        "time": "Wed Sep 22 18:34:36 2010 -0400"
      },
      "committer": {
        "name": "Nicolas Pitre",
        "email": "nicolas.pitre@linaro.org",
        "time": "Fri Oct 01 22:31:34 2010 -0400"
      },
      "message": "ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem\n\nThere are very few legitimate use cases, if any, for directly accessing\nsystem RAM through /dev/mem.  So let\u0027s mimic what they do on x86 and\nforbid it when CONFIG_STRICT_DEVMEM is turned on.\n\nSigned-off-by: Nicolas Pitre \u003cnicolas.pitre@linaro.org\u003e\n"
    },
    {
      "commit": "09bfafac3e237415cc4b6adde49f9f28b3a42659",
      "tree": "980006ad889a1395140dba2a3718ead537975df3",
      "parents": [
        "7e9501fdecdee8151938e624b41978307cadddd2"
      ],
      "author": {
        "name": "Rabin Vincent",
        "email": "rabin@rab.in",
        "time": "Tue Aug 10 19:32:37 2010 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Sep 02 15:24:53 2010 +0100"
      },
      "message": "ARM: 6314/1: ftrace: allow build without frame pointers on ARM\n\nWith a new enough GCC, ARM function tracing can be supported without the\nneed for frame pointers.  This is essential for Thumb-2 support, since\nframe pointers aren\u0027t available then.\n\nAcked-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nAcked-by: Steven Rostedt \u003crostedt@goodmis.org\u003e\nSigned-off-by: Rabin Vincent \u003crabin@rab.in\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "89f1fa080b5dca259c9779bcf81b95a409fdbf5b",
      "tree": "1d8246f9974cabf37239af909b6dc5f7be620c86",
      "parents": [
        "6c6971dc4e8c23bb61bf309898e1693f9c5c8c24"
      ],
      "author": {
        "name": "Ben Dooks",
        "email": "ben-linux@fluff.org",
        "time": "Fri Jan 29 09:02:17 2010 +0000"
      },
      "committer": {
        "name": "Ben Dooks",
        "email": "ben-linux@fluff.org",
        "time": "Wed Feb 24 01:52:06 2010 +0000"
      },
      "message": "ARM: SAMSUNG: Move plat-s3c Kconfig entries to plat-samsung and plat-s3c24xx\n\nMove the Kconfig entries from plat-s3c to plat-samsung and plat-s3c24xx\nas necessary. The S3C_BOOT entries and the DMA configuration can go to\nplat-samsung. The low-level UART configurations are currently S3C2XX\nspecific and can go to plat-s3c24xx.\n\nEliminating plat-s3c from the build process will be submitted seperately.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n"
    },
    {
      "commit": "bc7ecbcbc2c0ff235382077b55de7896775afc16",
      "tree": "9918b2f3fdeebd9c99a308af94d86bc13c80d0c8",
      "parents": [
        "c52854018ad123c9ef83867462457b75bb56d452",
        "285eae0a4ba0f467341476fd4c6981e5cdafc6be"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Dec 13 16:35:09 2009 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Dec 13 16:35:09 2009 +0000"
      },
      "message": "Merge branch \u0027devel\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel\n"
    },
    {
      "commit": "93fd03a8c6728b58879f8af20ffd55d9c32a778b",
      "tree": "7a12c9c6b4fa0b7b734ab7a8104636203c98b9a8",
      "parents": [
        "22763c5cf3690a681551162c15d34d935308c8d7"
      ],
      "author": {
        "name": "Catalin Marinas",
        "email": "catalin.marinas@arm.com",
        "time": "Wed Dec 09 10:02:18 2009 +0000"
      },
      "committer": {
        "name": "Catalin Marinas",
        "email": "catalin.marinas@arm.com",
        "time": "Wed Dec 09 10:02:18 2009 +0000"
      },
      "message": "ARM: Add an earlyprintk debug console\n\nThis patch allows an earlyprintk console if CONFIG_DEBUG_LL is enabled,\nusing the printch asm function.\n\nThe patch is based on the original work by Sascha Hauer.\n\nSigned-off-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nCc: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nAcked-by: Uwe Kleine-König \u003cu.kleine-koenig@pengutronix.de\u003e\nAcked-by: Pavel Machek \u003cpavel@ucw.cz\u003e\n"
    },
    {
      "commit": "c5d6c7708c3e58015b2e4e13e6cea02c8567a94e",
      "tree": "2ea9eb6d16be3de06d1172ed83e6bfe2c1c7d376",
      "parents": [
        "29e553631b2a0d4eebd23db630572e1027a9967a"
      ],
      "author": {
        "name": "Alexander Shishkin",
        "email": "virtuoso@slind.org",
        "time": "Tue Dec 01 14:00:51 2009 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Wed Dec 02 10:25:22 2009 +0000"
      },
      "message": "ARM: 5841/1: a driver for on-chip ETM and ETB\n\nThis driver implements support for on-chip Embedded Tracing Macrocell and\nEmbedded Trace Buffer. It allows to trigger tracing of kernel execution flow\nand exporting trace output to userspace via character device and a sysrq\ncombo.\n\nTrace output can then be decoded by a fairly simple open source tool [1]\nwhich is already sufficient to get the idea of what the kernel is doing.\n\n[1]: http://github.com/virtuoso/etm2human\n\nSigned-off-by: Alexander Shishkin \u003cvirtuoso@slind.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "16c79651a5ee1ad7e4fca65a7c5309dfca89ed28",
      "tree": "d34470a098ee2d2aa6af7e111547f9c6599395b5",
      "parents": [
        "e2ed3be7319f2734fcd9c7638888501934c22751"
      ],
      "author": {
        "name": "Catalin Marinas",
        "email": "catalin.marinas@arm.com",
        "time": "Fri Jul 24 12:33:02 2009 +0100"
      },
      "committer": {
        "name": "Catalin Marinas",
        "email": "catalin.marinas@arm.com",
        "time": "Fri Jul 24 12:33:02 2009 +0100"
      },
      "message": "Thumb-2: Add Thumb-2 support to the build files\n\nThis patch adds the necessary entries to the Makefile and Kconfig\nfiles for building the Thumb-2 kernel.\n\nSigned-off-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\n\n\n\n\n\n\n\n\n"
    },
    {
      "commit": "a18327f35a879a6467c3e901da7f68944b191732",
      "tree": "5acc314f227141876c362fee27af3e8ffebd4797",
      "parents": [
        "291e99a112f9bf34c027031de7ef8b94a2692937"
      ],
      "author": {
        "name": "Ben Dooks",
        "email": "ben-linux@fluff.org",
        "time": "Mon May 04 09:53:12 2009 +0100"
      },
      "committer": {
        "name": "Ben Dooks",
        "email": "ben-linux@fluff.org",
        "time": "Tue Jun 23 12:24:07 2009 +0100"
      },
      "message": "[ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT\n\nRemove the unused CONFIG_DEBUG_S3C_PORT as we currently only have\nsupport for using the S3C UARTs via the low-level debug code.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n"
    },
    {
      "commit": "c633c3cfcf41efe720020553aa3d4782fa0b9bd5",
      "tree": "b7de4fc54682dcbf1c89ca8374a55ce3851be685",
      "parents": [
        "22b61a11fd4e6d7a48d694ce350331bebc0394ed"
      ],
      "author": {
        "name": "Jean-Christop PLAGNIOL-VILLARD",
        "email": "plagnioj@jcrosoft.com",
        "time": "Wed Feb 25 04:20:40 2009 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Fri Feb 27 20:57:46 2009 +0000"
      },
      "message": "[ARM] 5412/1: XSCALE: add ice dcc support\n\nSCALE: add ice dcc support\n\nTested on the ixp425 with the ice PEEDI\n\nAck-by: Eric Miao \u003ceric.miao@marvell.com\u003e\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "adf8b37bafc1495393201a2ae4235846371870d0",
      "tree": "b1f8a3df5ec6c94b1a90fecc28894a1d6241163d",
      "parents": [
        "c4c5716e16c4ee971dec446a7e4801fbb8a1066b"
      ],
      "author": {
        "name": "Catalin Marinas",
        "email": "catalin.marinas@arm.com",
        "time": "Thu Feb 12 13:56:34 2009 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Feb 19 11:30:18 2009 +0000"
      },
      "message": "[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding\n\nThis patch also makes the frame pointer default to y only if\n!ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is\nenabled.\n\nSigned-off-by: Catalin Marinas \u003ccatalin.marinas@arm.com\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "ddf4e42c6a109392851d8843e2699bffd3c476bf",
      "tree": "153ed706231ad760fa489b30ff05e19d0dad54f1",
      "parents": [
        "70b6f2b4af709bded5220bcd8f3b4e255de20411"
      ],
      "author": {
        "name": "Sascha Hauer",
        "email": "s.hauer@pengutronix.de",
        "time": "Tue Jul 24 18:37:01 2007 +0200"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sat Jan 26 14:50:06 2008 +0000"
      },
      "message": "[ARM] CONFIG_DEBUG_STACK_USAGE\n\nIn early 2.6 days stack utilization instrumentation was made\nconfigurable. Seems that arm misses the DEBUG_STACK_USAGE option.\n\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "3ec20520ddfb654b1e60f51ff5e4769afde51b36",
      "tree": "14cfa39e87344c7ee33cb6033cab3860d625b49b",
      "parents": [
        "c76578460f1a0c4b77c33b2e8e295ccdfa893cdc"
      ],
      "author": {
        "name": "Ben Dooks",
        "email": "ben-linux@fluff.org",
        "time": "Sun Jul 22 16:12:04 2007 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Jul 22 16:44:33 2007 +0100"
      },
      "message": "[ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART\n\nRename DEBUG_S3C2410_PORT to DEBUG_S3C_PORT as well as\nDEBUG_S3C2410_UART to DEBUG_S3C_UART as part of the updates\nto moving to plat-s3c for S3C base support.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "c76578460f1a0c4b77c33b2e8e295ccdfa893cdc",
      "tree": "7bbc2afbffea1cee400c4dee843af766877e95a4",
      "parents": [
        "cbc4dbffc89fbaada94ae7873ad6631a701fd00e"
      ],
      "author": {
        "name": "Ben Dooks",
        "email": "ben-linux@fluff.org",
        "time": "Sun Jul 22 16:11:20 2007 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Jul 22 16:44:32 2007 +0100"
      },
      "message": "[ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT\n\nRename CONFIG_S3C2410_LOWLEVEL_UART_PORT to be\nCONFIG_S3C_LOWLEVEL_UART_PORT as we move to using\nplat-s3c for base of S3C operations.\n\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "eb8b0afc3a228cf6e0e1f9045127da3e72a6866b",
      "tree": "6292e622b778f2ba510dbe3a6d981cfaceb1cec0",
      "parents": [
        "80bcddc19d08a6eee99fb1bf3470ad6257af8721"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk@dyn-67.arm.linux.org.uk",
        "time": "Thu Nov 09 15:16:16 2006 +0000"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Thu Nov 30 12:24:47 2006 +0000"
      },
      "message": "[ARM] Remove DEBUG_WAITQ\n\nDEBUG_WAITQ appears to have been removed by others, but no one\nremoved the configuration option from ARM.  Remote it from both\nKconfig.debug and all default configurations.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "c41045a43a08f898ef5490036f761c87a43dcddc",
      "tree": "6cbdd1dd9a80d2bc16842be66d51b7e41fdf1554",
      "parents": [
        "672c6108a51bf559d19595d9f8193dfd81f0f752"
      ],
      "author": {
        "name": "Egry Gabor",
        "email": "gaboregry@t-online.hu",
        "time": "Sun Jun 04 21:22:11 2006 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Sun Jun 04 21:22:11 2006 +0100"
      },
      "message": "[ARM] Trivial typo fixes\n\nTrivial typo fixes in Kconfig files (ARM).\n\nSigned-off-by: Egry Gabor \u003cgaboregry@t-online.hu\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "35efb606e544403835df48cd240441a8e089c80b",
      "tree": "2ce3c8ff4cf0f865f823de95eeafff41fc88562d",
      "parents": [
        "9c2c389307c03a35672c80725ccf7968656d87ef"
      ],
      "author": {
        "name": "Russell King",
        "email": "rmk@dyn-67.arm.linux.org.uk",
        "time": "Fri Sep 09 15:57:17 2005 +0100"
      },
      "committer": {
        "name": "Russell King",
        "email": "rmk+kernel@arm.linux.org.uk",
        "time": "Fri Sep 09 15:57:17 2005 +0100"
      },
      "message": "[ARM] Fix typo in arch/arm/Kconfig.debug\n\nIt\u0027s called printch, not printchar\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}