)]}' { "log": [ { "commit": "66f03c614c0902ccf7d6160459362a9352f33271", "tree": "b9a8864efe5aa7fc5c96cc5ccbeca41f5cd6f6a7", "parents": [ "34800598b2eebe061445216473b1e4c2ff5cba99", "cdc3df6f44f72c5924a16a47e1663c3fb0e57820" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 27 16:47:35 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 27 16:47:35 2012 -0700" }, "message": "Merge tag \u0027dt\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc\n\nPull \"ARM: device tree work\" from Arnd Bergmann:\n \"Most of these patches convert code from using static platform data to\n describing the hardware in the device tree. This is only the first\n half of the changes for v3.4 because a lot of patches for this topic\n came in the last week before the merge window.\n\n Signed-off-by: Arnd Bergmann \u003carnd@arndb.de\u003e\"\n\nFix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}\n\n* tag \u0027dt\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)\n Document: devicetree: add OF documents for arch-mmp\n ARM: dts: append DTS file of pxa168\n ARM: mmp: append OF support on pxa168\n ARM: mmp: enable rtc clk in pxa168\n i2c: pxa: add OF support\n serial: pxa: add OF support\n arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board\n ARM: OMAP2+: Remove extra ifdefs for board-generic\n ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected\n ASoC: DT: Add digital microphone binding to PAZ00 board.\n ARM: dt: Add ARM PMU to tegra*.dtsi\n ARM: at91: at91sam9x5cm/dt: add leds support\n ARM: at91: usb_a9g20/dt: add gpio-keys support\n ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support\n ARM: at91: at91sam9m10g45ek/dt: add leds support\n ARM: at91: usb_a9g20/dt: add leds support\n ARM: at91/pio: add new PIO3 features\n ARM: at91: add sam9_smc.o to at91sam9x5 build\n ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter\n ARM: at91/tc: add device tree support to atmel_tclib\n ...\n" }, { "commit": "2f6e5f9458646263d3d9ffadd5e11e3d8d15a7d0", "tree": "d7c0e867b5de5a5b94c32c2c66a4e22e934918a7", "parents": [ "2778ebcc09c002cccdbd6b5509b5cbf4161b486d" ], "author": { "name": "Yong Zhang", "email": "yong.zhang0@gmail.com", "time": "Fri Mar 23 15:02:34 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Mar 23 16:58:39 2012 -0700" }, "message": "drivers/rtc: remove IRQF_DISABLED\n\nSince commit e58aa3d2d0cc (\"genirq: run irq handlers with interrupts\ndisabled\") we run all interrupt handlers with interrupts disabled and we\neven check and yell when an interrupt handler returns with interrupts\nenabled - see commit b738a50a2026 (\"genirq: warn when handler enables\ninterrupts\").\n\nSo now this flag is a NOOP and can be removed.\n\nSigned-off-by: Yong Zhang \u003cyong.zhang0@gmail.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nAcked-by: Wan ZongShun \u003cmcuos.com@gmail.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "b3af8b49befdcc53cb5d89e57662c359bc0b6989", "tree": "7c53b06733ae3f00a4971b0a3e7f4deee83169d1", "parents": [ "4e9267f1b42b4f7b66214161b55f1f73365692cd" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed Feb 15 21:24:46 2012 +0800" }, "committer": { "name": "Nicolas Ferre", "email": "nicolas.ferre@atmel.com", "time": "Thu Feb 23 14:57:58 2012 +0100" }, "message": "ARM: at91/rtc-at91sam9: pass the GPBR to use via resources\n\nThe GPBR registers are used for storing RTC values. The GPBR registers\nto use are now provided using standard resource entry. The array is\nfilled in SoC specific code.\nrtc-at91sam9 RTT as RTC driver is modified to retrieve this information.\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\n[nicolas.ferre@atmel.com: rework resources assignment]\nSigned-off-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nReviewed-by: Ryan Mallon \u003crmallon@gmail.com\u003e\n" }, { "commit": "4e9267f1b42b4f7b66214161b55f1f73365692cd", "tree": "d24783345549df8f3fbb12f77ee9fb3a0ca29607", "parents": [ "205056a3ea33f5aca7adffa4584eb6572b1d3273" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Sun Sep 18 10:17:54 2011 +0800" }, "committer": { "name": "Nicolas Ferre", "email": "nicolas.ferre@atmel.com", "time": "Thu Feb 23 14:57:58 2012 +0100" }, "message": "ARM: at91:rtc/rtc-at91sam9: ioremap register bank\n\nInstead of computing virtual address with AT91_VA_BASE_SYS, use the\nappropriate ioremap() call on the driver \"memory\" resource.\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "205056a3ea33f5aca7adffa4584eb6572b1d3273", "tree": "1672d459205d815001b097ff951a55c8a1299b86", "parents": [ "b55149529d265718a989b67468c4f03de0d3af7a" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Wed Feb 15 20:51:37 2012 +0800" }, "committer": { "name": "Nicolas Ferre", "email": "nicolas.ferre@atmel.com", "time": "Thu Feb 23 14:57:57 2012 +0100" }, "message": "ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use\n\nFor the RTT as RTC driver rtc-at91sam9, the platform_device structure\nis filled during SoC initialization. This will allow to convert this\nRTC driver as a standard platform driver.\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "2dcc90e6ac06d78433aec682961d9b587a07d4b5", "tree": "f81ba01526d9c31036c9e0b1255d0e52a45c384c", "parents": [ "e8c9dc93e27d891636defbc269f182a83e6abba8" ], "author": { "name": "Jean-Christophe PLAGNIOL-VILLARD", "email": "plagnioj@jcrosoft.com", "time": "Sun Sep 18 10:17:54 2011 +0800" }, "committer": { "name": "Nicolas Ferre", "email": "nicolas.ferre@atmel.com", "time": "Mon Feb 13 18:31:36 2012 +0100" }, "message": "ARM: at91:rtc/rtc-at91sam9: ioremap register bank\n\nInstead of computing virtual address with AT91_VA_BASE_SYS, use the\nappropriate ioremap() call on the driver \"memory\" resource.\n\nSigned-off-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "e428c6a2772bcf6b022baf7c8267cca3634c0c3e", "tree": "e53361c43ae67102e1050361ef432ac0401f8191", "parents": [ "51ba60c5bb3b0f71bee26404ddc22d8e4109e88a" ], "author": { "name": "John Stultz", "email": "john.stultz@linaro.org", "time": "Fri Feb 04 16:16:12 2011 -0800" }, "committer": { "name": "John Stultz", "email": "john.stultz@linaro.org", "time": "Wed Mar 09 11:24:54 2011 -0800" }, "message": "RTC: Clean out UIE icotl implementations\n\nWith the generic RTC rework, the UIE mode irqs are handled\nin the generic layer, and only hardware specific ioctls\nget passed down to the rtc driver layer.\n\nSo this patch removes the UIE mode ioctl handling in the rtc\ndriver layer, which never get used.\n\nCC: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCC: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCC: Marcelo Roberto Jimenez \u003cmroberto@cpti.cetuc.puc-rio.br\u003e\nCC: rtc-linux@googlegroups.com\nSigned-off-by: John Stultz \u003cjohn.stultz@linaro.org\u003e\n" }, { "commit": "d40358509ee862d7e4049187bc05eba1911a2959", "tree": "e3537777906af87541ee2c891c855c16b88b6776", "parents": [ "c1bc3beb0663b4aee97914293b2b4d41ac3a909c" ], "author": { "name": "Jelle Martijn Kok", "email": "jmkok@youcom.nl", "time": "Fri Feb 25 11:13:55 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Feb 25 14:00:56 2011 -0800" }, "message": "RTC: fix typo in drivers/rtc/rtc-at91sam9.c\n\nThe member of the rtc_class_ops struct is called alarm_irq_enable and\nnot alarm_irq_enabled\n\nCC: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nSigned-off-by: Jelle Martijn Kok \u003cjmkok@youcom.nl\u003e\nSigned-off-by: John Stultz \u003cjohn.stultz@linaro.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "16380c153a69c3784d2afaddfe0a22f353046cf6", "tree": "e923f26334d999a1e456ca80c446fbf8b1c2eedd", "parents": [ "ac54cd2bd5b4db4f1c03392d63daf355627ea180" ], "author": { "name": "John Stultz", "email": "john.stultz@linaro.org", "time": "Wed Feb 02 17:02:41 2011 -0800" }, "committer": { "name": "John Stultz", "email": "john.stultz@linaro.org", "time": "Thu Feb 03 13:02:35 2011 -0800" }, "message": "RTC: Convert rtc drivers to use the alarm_irq_enable method\n\nSome rtc drivers use the ioctl method instead of the alarm_irq_enable\nmethod for enabling alarm interupts. With the new virtualized RTC\nrework, its important for drivers to use the alarm_irq_enable instead.\n\nThis patch converts the drivers that use the AIE ioctl method to\nuse the alarm_irq_enable method. Other ioctl cmds are left untouched.\n\nI have not been able to test or even compile most of these drivers.\nAny help to make sure this change is correct would be appreciated!\n\nCC: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCC: Thomas Gleixner \u003ctglx@linutronix.de\u003e\nCC: Marcelo Roberto Jimenez \u003cmroberto@cpti.cetuc.puc-rio.br\u003e\nReported-by: Marcelo Roberto Jimenez \u003cmroberto@cpti.cetuc.puc-rio.br\u003e\nTested-by: Marcelo Roberto Jimenez \u003cmroberto@cpti.cetuc.puc-rio.br\u003e\nSigned-off-by: John Stultz \u003cjohn.stultz@linaro.org\u003e\n" }, { "commit": "5a0e3ad6af8660be21ca98a971cd00f331318c05", "tree": "5bfb7be11a03176a87296a43ac6647975c00a1d1", "parents": [ "ed391f4ebf8f701d3566423ce8f17e614cde9806" ], "author": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Wed Mar 24 17:04:11 2010 +0900" }, "committer": { "name": "Tejun Heo", "email": "tj@kernel.org", "time": "Tue Mar 30 22:02:32 2010 +0900" }, "message": "include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h\n\npercpu.h is included by sched.h and module.h and thus ends up being\nincluded when building most .c files. percpu.h includes slab.h which\nin turn includes gfp.h making everything defined by the two files\nuniversally available and complicating inclusion dependencies.\n\npercpu.h -\u003e slab.h dependency is about to be removed. Prepare for\nthis change by updating users of gfp and slab facilities include those\nheaders directly instead of assuming availability. As this conversion\nneeds to touch large number of source files, the following script is\nused as the basis of conversion.\n\n http://userweb.kernel.org/~tj/misc/slabh-sweep.py\n\nThe script does the followings.\n\n* Scan files for gfp and slab usages and update includes such that\n only the necessary includes are there. ie. if only gfp is used,\n gfp.h, if slab is used, slab.h.\n\n* When the script inserts a new include, it looks at the include\n blocks and try to put the new include such that its order conforms\n to its surrounding. It\u0027s put in the include block which contains\n core kernel includes, in the same order that the rest are ordered -\n alphabetical, Christmas tree, rev-Xmas-tree or at the end if there\n doesn\u0027t seem to be any matching order.\n\n* If the script can\u0027t find a place to put a new include (mostly\n because the file doesn\u0027t have fitting include block), it prints out\n an error message indicating which .h file needs to be added to the\n file.\n\nThe conversion was done in the following steps.\n\n1. The initial automatic conversion of all .c files updated slightly\n over 4000 files, deleting around 700 includes and adding ~480 gfp.h\n and ~3000 slab.h inclusions. The script emitted errors for ~400\n files.\n\n2. Each error was manually checked. Some didn\u0027t need the inclusion,\n some needed manual addition while adding it to implementation .h or\n embedding .c file was more appropriate for others. This step added\n inclusions to around 150 files.\n\n3. The script was run again and the output was compared to the edits\n from #2 to make sure no file was left behind.\n\n4. Several build tests were done and a couple of problems were fixed.\n e.g. lib/decompress_*.c used malloc/free() wrappers around slab\n APIs requiring slab.h to be added manually.\n\n5. The script was run on all .h files but without automatically\n editing them as sprinkling gfp.h and slab.h inclusions around .h\n files could easily lead to inclusion dependency hell. Most gfp.h\n inclusion directives were ignored as stuff from gfp.h was usually\n wildly available and often used in preprocessor macros. Each\n slab.h inclusion directive was examined and added manually as\n necessary.\n\n6. percpu.h was updated not to include slab.h.\n\n7. Build test were done on the following configurations and failures\n were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my\n distributed build env didn\u0027t work with gcov compiles) and a few\n more options had to be turned off depending on archs to make things\n build (like ipr on powerpc/64 which failed due to missing writeq).\n\n * x86 and x86_64 UP and SMP allmodconfig and a custom test config.\n * powerpc and powerpc64 SMP allmodconfig\n * sparc and sparc64 SMP allmodconfig\n * ia64 SMP allmodconfig\n * s390 SMP allmodconfig\n * alpha SMP allmodconfig\n * um on x86_64 SMP allmodconfig\n\n8. percpu.h modifications were reverted so that it could be applied as\n a separate patch and serve as bisection point.\n\nGiven the fact that I had only a couple of failures from tests on step\n6, I\u0027m fairly confident about the coverage of this conversion patch.\nIf there is a breakage, it\u0027s likely to be something in one of the arch\nheaders which should be easily discoverable easily on most builds of\nthe specific arch.\n\nSigned-off-by: Tejun Heo \u003ctj@kernel.org\u003e\nGuess-its-ok-by: Christoph Lameter \u003ccl@linux-foundation.org\u003e\nCc: Ingo Molnar \u003cmingo@redhat.com\u003e\nCc: Lee Schermerhorn \u003cLee.Schermerhorn@hp.com\u003e\n" }, { "commit": "870a2761a8df7dea7449b4225c9babcf22c6ead4", "tree": "6cec2579973aad15acfad14f48733585be7a85f2", "parents": [ "b51e8293182764ca7b1a1bdb28a5c5dc60152c76" ], "author": { "name": "Julia Lawall", "email": "julia@diku.dk", "time": "Fri Mar 05 13:44:23 2010 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 06 11:26:47 2010 -0800" }, "message": "rtc-at91sam9: Correct size given to memset\n\nMemset should be given the size of the structure, not the size of the\npointer.\n\nThe semantic patch that makes this change is as follows:\n(http://coccinelle.lip6.fr/)\n\n// \u003csmpl\u003e\n@@\ntype T;\nT *x;\nexpression E;\n@@\n\nmemset(x, E, sizeof(\n+ *\n x))\n// \u003c/smpl\u003e\n\nSigned-off-by: Julia Lawall \u003cjulia@diku.dk\u003e\nSigned-off-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "744bcb13d376b38ff1df3bbcc810493e1b999502", "tree": "b5b1788d19c315fa88256745473ad159a315061e", "parents": [ "f2fecec51ad593cce1b07a2b54830a8412a441ea" ], "author": { "name": "Kay Sievers", "email": "kay.sievers@vrfy.org", "time": "Tue Mar 24 16:38:22 2009 -0700" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Tue Mar 24 16:38:22 2009 -0700" }, "message": "rtc: struct device - replace bus_id with dev_name(), dev_set_name()\n\nCc: a.zummo@towertech.it\nCc: rtc-linux@googlegroups.com\nSigned-off-by: Kay Sievers \u003ckay.sievers@vrfy.org\u003e\nSigned-off-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n" }, { "commit": "7be90a6ba996e43902fc89704b60a57fd4659a63", "tree": "6f6b1b0d0c08d91455d850bdac01086ea38c355f", "parents": [ "ffc63b7d30370e23d7e052df2c1c2c4526464ba6" ], "author": { "name": "Stelian Pop", "email": "stelian@popies.net", "time": "Wed Oct 22 13:52:08 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Mon Dec 01 17:22:07 2008 +0000" }, "message": "[ARM] 5319/1: AT91: support AT91CAP9 revC CPUs\n\nThe AT91CAP9 revC CPU has a few differences over the previous,\nrevB CPU which was distributed in small quantities only (revA was\nan internal Atmel product only).\n\nThis patch adds the detection routines to recognize the different\nAT91CAP9 revisions (based on the PMC subsystem version number), and\nuses them to:\n\t- activate a workaround for the external interrupts levels\n\t (on revB CPUs)\n\t- set the UDPHS_BYPASS bit (on revB CPUs)\n\t- set AT91_GPBR register address to the correct offset\n\t (0xfffffd50 on revB, 0xfffffd60 on revC)\n\nFor debugging usage, the CPU revision can be found in /proc/cpuinfo\non the \u0027Revision\u0027 line.\n\nThis patch is extracted from Andrew Victor\u0027s -at91 patch (2.6.27-at91.patch)\nwhere it has been tested for the last 6 months.\n\nSigned-off-by: Stelian Pop \u003cstelian@popies.net\u003e\nSigned-off-by: Andrew Victor \u003clinux@maxim.org.za\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "a09e64fbc0094e3073dbb09c3b4bfe4ab669244b", "tree": "69689f467179891b498bd7423fcf61925173db31", "parents": [ "a1b81a84fff05dbfef45b7012c26e1fee9973e5d" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Tue Aug 05 16:14:15 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu Aug 07 09:55:48 2008 +0100" }, "message": "[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach\n\nThis just leaves include/asm-arm/plat-* to deal with.\n\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "f70c5253b41444fd2779e1f76bfe25811d9b8c23", "tree": "e7baa4133bc84b56c7ffcdff9feefa356595d71a", "parents": [ "b8291ad07a7f3b5b990900f0001198ac23ba893e" ], "author": { "name": "Russell King", "email": "rmk@dyn-67.arm.linux.org.uk", "time": "Sun Apr 20 12:22:36 2008 +0100" }, "committer": { "name": "Russell King", "email": "rmk+kernel@arm.linux.org.uk", "time": "Thu May 22 14:56:35 2008 +0100" }, "message": "[RTC] remove references to asm/mach/time.h\n\nasm/mach/time.h is the ARM header file for setting up kernel ticker\ntimekeeping (be that the old jiffy interrupt or the new clocksource.)\nRTC drivers have no business using this header file, and in fact do\nnot require it.\n\nBuild tested on at91sam9rl, omap and s3c2410 configurations.\n\nAcked-by: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nAcked-by: Andrew Victor \u003clinux@maxim.org.za\u003e\nSigned-off-by: Russell King \u003crmk+kernel@arm.linux.org.uk\u003e\n" }, { "commit": "2a4e2b8780c6df42b19c053243dada7fa4d311ee", "tree": "4970af3a9ee9c2a8b3e4861ac552cb9262acbaa0", "parents": [ "dca03a51549bc645685fb8a77efa64df531666c3" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Mon Apr 28 02:12:00 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Apr 28 08:58:17 2008 -0700" }, "message": "rtc: replace remaining __FUNCTION__ occurrences\n\n__FUNCTION__ is gcc-specific, use __func__\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nCc: David Brownell \u003cdavid-b@pacbell.net\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9fedc9f1b18f6b931c3b695d7280f17fc308309b", "tree": "17c5ed06d8ac23e5bf14111d8d28aa662a83879c", "parents": [ "3150e63df41450a795bbd0bd98a8e70da74e0285" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Mar 19 17:01:09 2008 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 19 18:53:37 2008 -0700" }, "message": "rtc-at91sam9 fixes\n\nUpdates to the at91sam9 rtt-as-rtc driver:\n\n - Bugfix: IRQ enable bits need shifting before masking with status\n - Platform code to initialize wakeup bits didn\u0027t get merged; cope\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Justin Waters \u003cjustin.waters@timesys.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "4cdf854f7d60498bbda436068a118b95059b244b", "tree": "e7d5169176a48a9b5dd980baa42c9083244736e7", "parents": [ "f618258ad8af0413f08af60bd0eb050562e700fa" ], "author": { "name": "David Brownell", "email": "david-b@pacbell.net", "time": "Wed Feb 06 01:38:59 2008 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@woody.linux-foundation.org", "time": "Wed Feb 06 10:41:14 2008 -0800" }, "message": "rtc: at91sam9 RTC support (RTT and/or RTC)\n\nAT91sam9 RTC support, primarily in the form of an RTT-as-RTC driver that was\nextracted from 2.6.23-at91 patch and updated:\n\n - Relies on now-merged platform updates, which associate the RTT\n hardware address with each RTT and use the \"at91_rtt\" name.\n\n - RTC framework related fixes and cleanups, notably:\n * removed now-needless suspend/resume clock offset logic\n * alarm read/write now respects the \"enabled\" flag\n * suspend always disables update irqs\n * shutdown (and startup) disables all irqs\n\n - Misc cleanup:\n * use dev_*() messaging\n * add comments\n * remove globals,\n * ... etc\n\n - Don\u0027t force use of RTT0 and GPBR0. Either resource may need\n to be used for other purposes (like NO_HZ support).\n\n - Update \"AT91RM9200 RTC\" Kconfig to allow it on SAM9RL chips\n (it has both RTT and RTC).\n\nDriver binding uses bus_find_device() to avoid needing any kind of \"timer\nlibrary\" code when there\u0027s more than one RTT module. (This timer can be used\nas an RTC, to support NO_HZ operation, or potentially for other stuff. The\nchoice is a per-system policy.)\n\nSigned-off-by: David Brownell \u003cdbrownell@users.sourceforge.net\u003e\nCc: Michel Benoit \u003cmurpme@gmail.com\u003e\nCc: Nicolas Ferre \u003cnicolas.ferre@rfo.atmel.com\u003e\nCc: Andrew Victor \u003clinux@maxim.org.za\u003e\nCc: Russell King \u003crmk@arm.linux.org.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" } ] }