)]}' { "log": [ { "commit": "0607d077809014082965061e9e88f38459c070ac", "tree": "600167192feeb50e8e68c9792506b8ca6d78aa77", "parents": [ "0349471bc556d5ecd3e9214af7774fbf2d956931" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed Dec 21 08:27:20 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 31 08:26:29 2011 -0200" }, "message": "[media] dvb_core: estimate bw for all non-terrestial systems\n\nInstead of just estimating the bandwidth for DVB-C annex A/C,\nalso fill it at the core for ATSC and DVB-C annex B. This\nsimplifies the logic inside the tuners, as all non-satellite\ntuners can just use c-\u003ebandwidth_hz for all supported\ndelivery systems.\n\nIt could make sense to latter use it also for satellite\nsystems, as several DVB-S drivers have their own calculus.\nHowever, on DVB-S2 the bw estimation is a little more complex,\nand the existing drivers have some optimized calculus for\nbandwidth. So, let\u0027s not touch on it for now.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "0349471bc556d5ecd3e9214af7774fbf2d956931", "tree": "77821e1fb0c5f95acd2a67c67578320ded5aef27", "parents": [ "7b0962d32362a0d56627a1dfdb4e8229c5f51f94" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Dec 22 18:11:39 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 31 08:26:24 2011 -0200" }, "message": "[media] dvb: replace SYS_DVBC_ANNEX_AC by the right delsys\n\nSYS_DVBC_ANNEX_AC is an alias for SYS_DVBC_ANNEX_A. However,\nthe first one is incorrect, as not all devices support both.\nSo, replace its occurrences by the proper value (either\nSYS_DVBC_ANNEX_A or both SYS_DVBC_ANNEX_A and SYS_DVBC_ANNEX_C).\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f36472da3a6d62ee46ae773bbbf05ddb24cd970c", "tree": "bceca4694ec89f03ba49cf1c93f4df4cdacfa0d8", "parents": [ "a7187c324ff5a879b5b0e6bb947664071c870803" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Dec 11 17:09:46 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 17:22:36 2011 -0200" }, "message": "[media] it913x stop dual frontend attach in warm state with single devices\n\nStop dual frontend attach in warm state with single devices.\n\nSince this is a no reconnect device this occurs only after a warm system\nreboot.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a7187c324ff5a879b5b0e6bb947664071c870803", "tree": "3984802dd7a7e04d8118cff9cf81aa7b89e440b6", "parents": [ "1b7acf0ccd61b814032668d1d21740cfae3304e3" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Dec 11 12:20:28 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 17:22:26 2011 -0200" }, "message": "[media] [BUG] Re: add support for IT9135 9005 devices\n\nRe: [git:v4l-dvb/for_v3.3] [media] it9135: add support for IT9135 9005 devices\nOn Sun, 2011-12-11 at 11:55 +0100, Mauro Carvalho Chehab wrote:\n\u003e This is an automatic generated email to let you know that the following patch were queued at the\n\u003e http://git.linuxtv.org/media_tree.git tree:\n\u003e\n\u003e Subject: [media] it9135: add support for IT9135 9005 devices\n\u003e Author: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\n\u003e Date: Wed Nov 30 17:16:09 2011 -0300\n\u003e\n\u003e Support add for IT9135 9005 devices\n\u003e\n\u003e With this patch IT9135 devices now move to using\n\u003e dvb-usb-it9135-01.fw firmware\n\u003e IT9137 remain on previous firmware.\nHi Mauro,\n\nI have made a small mistake on this patch.\n\nI forgot to increase number of num_device_descs to 4.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b9d5efcceb6b34ee20111b62cf7be61ae79af4e9", "tree": "7a0dc9653474e821ebd2de3ee1d2f6faf9cab75f", "parents": [ "a1dca1e30ac7991d8a90a3377008c850eb466edf" ], "author": { "name": "Andreas Oberritter", "email": "obi@linuxtv.org", "time": "Fri Dec 09 21:37:00 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 17:16:01 2011 -0200" }, "message": "[media] DVB: dvb_frontend: fix delayed thread exit\n\nThere are some issues and miss-behaves at the dvb fe thread:\n\n1) dvb_shutdown_timeout should be dvb_shutdown_timeout * HZ\n instead of (dvb_shutdown_timeout * HZ + 1);\n\n2) add a memory barrier to warrant that all CPU\u0027s will consider the\n new value for release_jiffies;\n\n3) wake up dvb thread also when fepriv-\u003eexit \u003d\u003d DVB_FE_NO_EXIT.\n\nSigned-off-by: Andreas Oberritter \u003cobi@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "54828d19f82be0d62e22fbd5a6354136c50a20eb", "tree": "69bb1f27ed1fc6d217cee0d106dbe530692ed5a6", "parents": [ "26110dac8b3b30a99555d85fc1308a21fba5b746" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Thu Dec 15 10:30:38 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:58:01 2011 -0200" }, "message": "[media] lgdt330x: warn on errors blasting modulation config to the lgdt3303\n\nfix the following build warning:\n\nlgdt330x.c: In function \"lgdt330x_set_parameters\":\nlgdt330x.c:346:6: warning: variable \"err\" set but not used\n[-Wunused-but-set-variable]\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "26110dac8b3b30a99555d85fc1308a21fba5b746", "tree": "5b2225de2991ccc7b4a182bcfa342616638b8413", "parents": [ "7e7b8287af32400daea1e231057b4b75934af347" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Thu Dec 15 10:16:09 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:57:29 2011 -0200" }, "message": "[media] lgdt330x: fix behavior of read errors in lgdt330x_read_ucblocks\n\ninitialize *ucblocks to zero \u0026 fix the following build warning:\n\nlgdt330x.c: In function \"lgdt330x_read_ucblocks\":\nlgdt330x.c:288:6: warning: variable \"err\" set but not used\n[-Wunused-but-set-variable]\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "14c038627e275f7ccec4761350783340a7c1ae2b", "tree": "32446599e6c9d68b5004d3d2a55f5906c9c3ce74", "parents": [ "1ca8dde859844c50e043182060acf14be5288463" ], "author": { "name": "Manu Abraham", "email": "abraham.manu@gmail.com", "time": "Thu Nov 24 11:59:53 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:50:29 2011 -0200" }, "message": "[media] CXD2820r: Query DVB frontend delivery capabilities\n\nOverride default delivery system information provided by FE_GET_INFO,\nso that applications can enumerate delivery systems provided by the\nfrontend.\n\nSigned-off-by: Manu Abraham \u003cabraham.manu@gmail.com\u003e\nAcked-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "1ca8dde859844c50e043182060acf14be5288463", "tree": "48080cd2ca5ca0bc47a997a955c6f7bd95d84000", "parents": [ "f571e004c396c2ed8c2ba6bfc8a229b6bd5ab724" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:34:51 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:34:51 2011 -0200" }, "message": "[media] tda18271c2dd: fix support for DVB-C\n\nAs reported by Hartmut \u003ce9hack@googlemail.com\u003e:\n\n\u003e A break is missing before the default statement. Delivery systems for DVB-C result always\n\u003e in an error.\n\nReported-by: Hartmut \u003ce9hack@googlemail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f571e004c396c2ed8c2ba6bfc8a229b6bd5ab724", "tree": "7c5559319e97d66212ac1cf0ac5281bed75a8cdc", "parents": [ "e90ab840fb826621c8c01cc9e70ca3f0889fa416" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Mon Nov 28 20:58:11 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:31:33 2011 -0200" }, "message": "[media] af9013: rewrite whole driver\n\nRewrite whole af9013 demod driver in order to decrease I2C I/O.\n\nWe need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used)\nseems to have some problems under heavy I2C traffic.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e90ab840fb826621c8c01cc9e70ca3f0889fa416", "tree": "68863d3856baab231f7cd39d762bf20312fbc995", "parents": [ "6cf1056f0a7ecb543d4b523f6c55a5587fc455f2" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Sat Nov 12 22:33:30 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 30 15:30:03 2011 -0200" }, "message": "[media] af9015: limit I2C access to keep FW happy\n\nAF9015 firmware does not like if it gets interrupted by I2C adapter\nrequest on some critical phases. During normal operation I2C adapter\nis used only 2nd demodulator and tuner on dual tuner devices.\n\nOverride demodulator callbacks and use mutex for limit access to\nthose \"critical\" paths to keep AF9015 happy.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "1a5cd29631a6b75e49e6ad8a770ab9d69cda0fa2", "tree": "c946329748384883f0c7215a9c3a9ad7b4ebd2f3", "parents": [ "27d9a5e93842852c198aae9f45fd6c272bf2b374" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 20:37:01 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 14:01:08 2011 -0200" }, "message": "[media] tda10021: Add support for DVB-C Annex C\n\nWhile tda10021 supports both DVB-C Annex A and C, it is currently\nhard-coded to Annex A. Add support for Annex C and re-work the\ncode in order to report the delivery systems, thans to Andreas,\nthat passed us the register settings for the Roll-off factor.\n\nThanks-to: Andreas Oberriter \u003cobi@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "27d9a5e93842852c198aae9f45fd6c272bf2b374", "tree": "6060a9d25dded1936bfc86ccebe8820e1068dee1", "parents": [ "74b4576e63ec4cc765271db8815a42aa8f80ed14" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 13:55:47 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 13:55:47 2011 -0200" }, "message": "[media] tda10021: Don\u0027t use a magic numbers for QAM modulation\n\nConvert the existing data struct to use the QAM modulation macros,\ninstead of assuming that they\u0027re numbered from 0 to 5.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "74b4576e63ec4cc765271db8815a42aa8f80ed14", "tree": "b672bc4d6557e29dde4dd1ed65090ef184fbb5a2", "parents": [ "37c52abd565aa8d10ffd7f31a37792425d1564df" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 20:37:00 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 13:51:51 2011 -0200" }, "message": "[media] tda10023: add support for DVB-C Annex C\n\nThe difference between Annex A and C is the roll-off factor.\nProperly implement it inside the driver, using the information\nprovided by Andreas.\n\nThanks-to: Andreas Oberriter \u003cobi@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "37c52abd565aa8d10ffd7f31a37792425d1564df", "tree": "0aed05d95a97010981607e5d547f5969bf930f54", "parents": [ "0d7d0ac87b7f023a4e76e7ea7a16e904d5a49ca1" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 20:36:59 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 13:27:19 2011 -0200" }, "message": "[media] tda10023: Don\u0027t use a magic numbers for QAM modulation\n\nConvert the existing data struct to use the QAM modulation macros,\ninstead of assuming that they\u0027re numbered from 0 to 5.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "0d7d0ac87b7f023a4e76e7ea7a16e904d5a49ca1", "tree": "570a8079ea6df00c8752e60400b2435b1843aff3", "parents": [ "fd66c45dd51000ff444231a94ac15ccab8cffd3d" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 20:36:58 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 11:50:37 2011 -0200" }, "message": "[media] drx-k: report the supported delivery systems\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "fd66c45dd51000ff444231a94ac15ccab8cffd3d", "tree": "9f54f08e52b38c936329a85a396abd98369be048", "parents": [ "669a4ba44d6054f147ef123b0c9a640e49c518e0" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 20:36:57 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 11:50:23 2011 -0200" }, "message": "[media] Remove Annex A/C selection via roll-off factor\n\nInstead of using a roll-off factor, change DRX-K \u0026 friends to select\nthe bandwidth filter and the Nyquist half roll-off via delivery system.\n\nThis provides a cleaner support for Annex A/C switch.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "0d6ac1f8a58836dcca54a42354ff84c52cc0f49a", "tree": "ae04878d4c4202e2e82a7420d8ce7319ee2b7a1f", "parents": [ "5183c137974da0c8192fc4c5cc5cae5974125b06" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Sun Dec 11 18:51:01 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Dec 20 09:26:53 2011 -0200" }, "message": "[media] mxl111sf: absorb size_of_priv into *_STREAMING_CONFIG macros\n\nabsorb \".size_of_priv \u003d sizeof(struct mxl111sf_adap_state)\"\ninto *_STREAMING_CONFIG macros\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "5183c137974da0c8192fc4c5cc5cae5974125b06", "tree": "c5c8e38179bdc22ead00c29b4ea677afd3254417", "parents": [ "bcc072756e4467dc30e502a311b1c3adec96a0e4" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 09:03:29 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Dec 17 22:15:02 2011 -0200" }, "message": "[media] budget-ci: Fix Hauppauge RC-5 IR support\n\nHauppauge RC-5 tables require the full scancodes. The code at budget-ci\nhandles it right, however, it request the rc-code to mask them with 0xff,\nbreaking support for some remote controllers.\n\nFix it by not selecting a scancode mask when the driver is on full_rc5 mode.\n\nReported-by: Brian May \u003cbrian@microcomaustralia.com.au\u003e\nTested-by: Brian May \u003cbrian@microcomaustralia.com.au\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "bcc072756e4467dc30e502a311b1c3adec96a0e4", "tree": "9e49eb9ab7819d8bc7eeb8918698d354c5bdcb92", "parents": [ "6bad3aeb8cc542b90ae62b35caca44305cd93ef5" ], "author": { "name": "Manu Abraham", "email": "abraham.manu@gmail.com", "time": "Thu Nov 17 05:10:49 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Dec 12 15:04:34 2011 -0200" }, "message": "[media] STV0900: Query DVB frontend delivery capabilities\n\nOverride default delivery system information provided by FE_GET_INFO, so\nthat applications can enumerate delivery systems provided by the frontend.\n\nSigned-off-by: Manu Abraham \u003cabraham.manu@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "6bad3aeb8cc542b90ae62b35caca44305cd93ef5", "tree": "5c66d74345ed9dda85154fd01d92a5e44c66ca13", "parents": [ "61d4f9c918c591e4f7970ef29bafb302664be466" ], "author": { "name": "Manu Abraham", "email": "abraham.manu@gmail.com", "time": "Thu Nov 17 01:37:06 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Dec 12 15:04:22 2011 -0200" }, "message": "[media] STV090x: Query DVB frontend delivery capabilities\n\nOverride default delivery system information provided by FE_GET_INFO, so\nthat applications can enumerate delivery systems provided by the frontend.\n\nSigned-off-by: Manu Abraham \u003cabraham.manu@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "61d4f9c918c591e4f7970ef29bafb302664be466", "tree": "c2bb8614e75d13542f2554fcde952c31a1aced6b", "parents": [ "6c7ef54774a28aec6268ca325abf95c7d6956ee3" ], "author": { "name": "Manu Abraham", "email": "abraham.manu@gmail.com", "time": "Wed Nov 16 22:14:53 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Dec 12 15:04:05 2011 -0200" }, "message": "[media] STB0899: Query DVB frontend delivery capabilities\n\nOverride default delivery system information provided by FE_GET_INFO, so\nthat applications can enumerate delivery systems provided by the frontend.\n\nSigned-off-by: Manu Abraham \u003cabraham.manu@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ba2780c796badfc3741c7cb499a575ca49f17e6d", "tree": "63e5968d4366d97b56441e7a6ae0348b152a7f44", "parents": [ "e79c70e6e59e764fbef2a68a7d7303c3286ea7a8" ], "author": { "name": "Manu Abraham", "email": "abraham.manu@gmail.com", "time": "Sun Nov 13 18:47:44 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Dec 12 15:03:32 2011 -0200" }, "message": "[media] DVB: Query DVB frontend delivery capabilities\n\n Currently, for any multi-standard frontend it is assumed that it just\n has a single standard capability. This is fine in some cases, but\n makes things hard when there are incompatible standards in conjuction.\n Eg: DVB-S can be seen as a subset of DVB-S2, but the same doesn\u0027t hold\n the same for DSS. This is not specific to any driver as it is, but a\n generic issue. This was handled correctly in the multiproto tree,\n while such functionality is missing from the v5 API update.\n\n http://www.linuxtv.org/pipermail/vdr/2008-November/018417.html\n\n Later on a FE_CAN_2G_MODULATION was added as a hack to workaround this\n issue in the v5 API, but that hack is incapable of addressing the\n issue, as it can be used to simply distinguish between DVB-S and\n DVB-S2 alone, or another X vs X2 modulation. If there are more systems,\n then you have a potential issue.\n\n An application needs to query the device capabilities before requesting\n any operation from the device.\n\nSigned-off-by: Manu Abraham \u003cabraham.manu@gmail.com\u003e\nAcked-by: Andreas Oberritter \u003cobi@linuxtv.org\u003e\nAcked-by: Oliver Endriss \u003co.endriss@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "50815707eebc7ce12bfd97933a6e68a482c4d7ab", "tree": "bc0eda56c8113b6786e11fef950aa36adcc9fec3", "parents": [ "c6401af6692bac94b7ae1ff04f1d32c5dd1a38e3" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Dec 04 08:20:37 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 09:24:38 2011 -0200" }, "message": "[media] it913x: multiple devices on system. Copy ite_config to priv area\n\nIf there are two or more different it913x devices on the system they share the same\nite_config and over write its settings.\n\nTo over come this, the ite_config is copied to the priv area.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "15157c506d742b6767edcd486d6c73ea907fb7cf", "tree": "3667eba5c03228a925e9a716e6ad1fba6eb41314", "parents": [ "7330f7c157308166c507da9b9926107d85f960d3" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Thu Dec 01 17:35:48 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 09:12:21 2011 -0200" }, "message": "[media] it913x add retry to USB bulk endpoints and IO\n\nThis a bus repeater for it913x devices. Commands usually fail because of other\nactivity on the USB bus.\n\nBulk failures that report -ETIMEDOUT or -EBUSY are repeated.\n\nEnpoints that return actlen not equal len request -EAGAIN.\n\nThe retry is set at 10.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "5e642c06b561fd95d77d13f41adeb6e906acc31d", "tree": "c3965b653589e45d932126a1c287d2084bfab05c", "parents": [ "b69902914803a8bf93f39f0db642430504c800ba" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Wed Nov 30 17:16:09 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 08:55:29 2011 -0200" }, "message": "[media] it9135: add support for IT9135 9005 devices\n\nSupport add for IT9135 9005 devices\n\nWith this patch IT9135 devices now move to using\ndvb-usb-it9135-01.fw firmware\nIT9137 remain on previous firmware.\n\nIT9135 devices seem more stable on this firmware.\n\nIf the user wishes to remain on it9137 firmware they can change\nback using firmware\u003d1 module option.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b69902914803a8bf93f39f0db642430504c800ba", "tree": "251343004757661268e14c26753fccba3a1c088d", "parents": [ "c725ff69737313647f981813e8f39a372c99b0f0" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Wed Nov 30 17:14:47 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 08:55:27 2011 -0200" }, "message": "[media] dvb-usb/it913x: multi firmware loader\n\nMulti firmware loader\n This uses scatter write firmware headers\n The firmware must start with 03 XX 00\n and be the extract firmware length.\n\n I have tried all available firmwares with this loader.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "c725ff69737313647f981813e8f39a372c99b0f0", "tree": "d457e186dfb09cc427e785c52b8077ae4ab2989b", "parents": [ "990f49af3f564b9a0f572e06f22e2ae34c79c37d" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Mon Nov 28 18:22:41 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 08:14:52 2011 -0200" }, "message": "[media] it913x: support for NEC extended keys\n\nAdd support for NEC extended keys.\n\nThe default remote has now changed to RC_MAP_MSI_DIGIVOX_III\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "990f49af3f564b9a0f572e06f22e2ae34c79c37d", "tree": "87858d195c1cb942dd2269f0cc46d79fe6f3b205", "parents": [ "773ddbd228dc16a4829836e1dc16383e44c8575e" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Mon Nov 28 18:04:21 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 08:13:27 2011 -0200" }, "message": "[media] it913x: support for different tuner regs\n\nThere appears to be differences in the tuner registers\non earlier IT9135 devices.\n\nUsing the current IT9137 settings cause corruptions on\nsome channels\n\nThis patch is in preparation for multi firmware loading and\ncurrent unsupported types.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ed942c507465287777a5342f83af1638ba05a6ac", "tree": "cd54d3880f7c4f6de94aa8bcf827dd719cf8322d", "parents": [ "9c1133c7c89266d4969e36527ce7be958d1b93c6" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Nov 27 18:14:05 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 08:03:29 2011 -0200" }, "message": "[media] it913x-fe: more user and debugging info\n\nMore debugging and user info from it913x-fe.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "9c1133c7c89266d4969e36527ce7be958d1b93c6", "tree": "7944f20eb163a989410cbf7d146ecfb4cfaec334", "parents": [ "48763e2c6e76fbaa64229219593c1a456fd32c67" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Nov 27 17:35:06 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Dec 11 07:58:25 2011 -0200" }, "message": "[media] it913x: endpoint size changes\n\nPreviously endpoint had been aligned to packet size (128)\n\nSome early it9135 devices appear to have problems with this.\n\nThis patch now aligns with mpeg TS size (188)\n\nWith the pid filter off max size is increased to the maxmium\nsize (348 * 188)\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "48763e2c6e76fbaa64229219593c1a456fd32c67", "tree": "8d2716b2ae7d8f62aa9fe953e11a6fa89c366fcf", "parents": [ "0433cd28f3a421e0be708c856c7d0c66d3f60bd7" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 09 08:53:36 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Dec 09 20:49:05 2011 -0200" }, "message": "[media] drxk: Switch the delivery system on FE_SET_PROPERTY\n\nThe DRX-K doesn\u0027t change the delivery system at set_properties,\nbut do it at frontend init. This causes problems on programs like\nw_scan that, by default, opens both frontends.\n\nInstead, explicitly set the format when set_parameters callback is\ncalled.\n\nTested-by: Eddi De Pieri \u003ceddi@depieri.net\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "78bd3dc8dafc48f11fb761bc01b16e045638fec8", "tree": "54c02cfd36ca58917d08f699d15fc30524e159d9", "parents": [ "2bf936290baff2507763a2540cd9029e70ae39e2" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Dec 08 12:58:22 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Dec 08 17:04:38 2011 -0200" }, "message": "[media] xc5000,tda18271c2dd: Fix bandwidth calculus\n\nWhile here, add a debug message, to easy detecting bugs on it.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "68dd9dd4113a7d2bd329590091a3f97fee3fd659", "tree": "d12d9a1c539deb3474a1b3bd2c4ad906413c3e5b", "parents": [ "53090aada474fe10052602ca3f46701591b666a5" ], "author": { "name": "Thomas Meyer", "email": "thomas@m3y3r.de", "time": "Thu Nov 17 18:43:40 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 21:05:59 2011 -0200" }, "message": "[media] dw2102: Use kmemdup rather than duplicating its implementation\n\nThe semantic patch that makes this change is available\nin scripts/coccinelle/api/memdup.cocci.\n\nSigned-off-by: Thomas Meyer \u003cthomas@m3y3r.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "53090aada474fe10052602ca3f46701591b666a5", "tree": "15ea9665c41b0a10f1a636e9f37fbf94556ce67f", "parents": [ "d1190024f0277a225c5926dbeb23306eb55035be" ], "author": { "name": "Thomas Meyer", "email": "thomas@m3y3r.de", "time": "Thu Nov 17 18:43:40 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 21:04:51 2011 -0200" }, "message": "[media] drxd: Use kmemdup rather than duplicating its implementation\n\nThe semantic patch that makes this change is available\nin scripts/coccinelle/api/memdup.cocci.\n\nSigned-off-by: Thomas Meyer \u003cthomas@m3y3r.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "d1190024f0277a225c5926dbeb23306eb55035be", "tree": "26fe6efd166ab170ea3e6e2ec07d62ff17506f9a", "parents": [ "88f3a3584c74af84cd0476ee94af6234b50ce697" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Mon Aug 29 10:58:47 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:56:07 2011 -0200" }, "message": "[media] dib9090: limit the I2C speed\n\nThe intend of this patch is to limit the maximum I2C speed.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "88f3a3584c74af84cd0476ee94af6234b50ce697", "tree": "0ed58554dc9bd81406c301d69f90b58a5b276c2c", "parents": [ "0c32dbd74fa947a922b9df125ac8795ce761fa8a" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Wed Aug 10 05:28:38 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:55:52 2011 -0200" }, "message": "[media] dib8096P: add the reference board TFE8096P\n\nThe intend of this patch is to add the support for the DiBcom reference\nboard TFE8096P.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "0c32dbd74fa947a922b9df125ac8795ce761fa8a", "tree": "1b72fafc5f48284657ed858bbf5b0e576b2867dd", "parents": [ "b293f304c52c4e7a3473dad4d4d0f3bc3c3cd32f" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Wed Aug 10 05:17:18 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:55:20 2011 -0200" }, "message": "[media] add the support for DiBcom dib8096P\n\nThe purpose of this patch is to support the DiBcom chip dib8096P.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b293f304c52c4e7a3473dad4d4d0f3bc3c3cd32f", "tree": "45ad71168657ce20de8dbe8491faf849331018a9", "parents": [ "1f6bfcc752445ea03cb63c0c6bf5ee54d0fa73d5" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Tue Aug 09 04:48:25 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:50:49 2011 -0200" }, "message": "[media] dib7090: add the reference board TFE7790E\n\nThe intend of this patch is to add the support for the DiBcom reference\nboard TFE7790E.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "1f6bfcc752445ea03cb63c0c6bf5ee54d0fa73d5", "tree": "a35274d46c25d35c7bdd6fffaa8013b39f45c63c", "parents": [ "a685dbbc65e1e0f266e69a538dfd65a2f10fcc91" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Mon Jul 04 12:33:54 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:49:33 2011 -0200" }, "message": "[media] DiB8000: improve the tuning and the SNR monitoring\n\nThis patches improves the tuning of the dib8000 and correct the monitoringr\nof the SNR.The patch allows to faster detect that there is no ISDB-T channel\non the wanted frequency.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a685dbbc65e1e0f266e69a538dfd65a2f10fcc91", "tree": "6cb9900c5e49048010160a89b141af8035042a8b", "parents": [ "6724a2f4f7a6cb9251641a46e1ab06bb85adf1b5" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Fri Aug 05 14:10:40 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:48:29 2011 -0200" }, "message": "[media] DiBcom: correct warnings\n\nThe intend of this patch is to correct some warnings given.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "6724a2f4f7a6cb9251641a46e1ab06bb85adf1b5", "tree": "b924ea227c503e0db722baad647983ce1f16bfb2", "parents": [ "2e802861403c95ad6a566ff6d7a1a1a45d29c30e" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Fri Aug 05 13:49:33 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:48:11 2011 -0200" }, "message": "[media] dib7090: add the reference board TFE7090E\n\nThe intend of this patch is to add the support for the DiBcom reference\nboard TFE7090E.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "2e802861403c95ad6a566ff6d7a1a1a45d29c30e", "tree": "9b4f8454d68a692b9ad248dbddba571c87883643", "parents": [ "dd7aaa4d9d97a8571bcfa498e90b9daf540db1cf" ], "author": { "name": "Olivier Grenie", "email": "olivier.grenie@dibcom.fr", "time": "Fri Aug 05 10:39:15 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 20:47:45 2011 -0200" }, "message": "[media] dib7000p/dib0090: update the driver\n\nThis patch intends to update the dib7000p and dib0090 driver in order to\nimprove the performances.\n\nSigned-off-by: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Patrick Boettcher \u003cpatrick.boettcher@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e50f20e1712bc3ebf9cf4c8fc9e6d743ee54626a", "tree": "c7d7b63afdcdff3f4f0a8e3bfd24f2ea852bcf54", "parents": [ "dc56905fc75cd03aaf05499a93b29755193a159e" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Sun Nov 13 15:55:18 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 17:56:13 2011 -0200" }, "message": "[media] ce168: remove experimental from Kconfig\n\nI have been working many years without problems.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "dc56905fc75cd03aaf05499a93b29755193a159e", "tree": "9396b95afea6792d2b652aec34a84db3f86f69d1", "parents": [ "13d723ba98545c451bb40711e718087d28985b0f" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Sun Nov 13 15:53:04 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 17:56:03 2011 -0200" }, "message": "[media] ce6230: remove experimental from Kconfig\n\nI have been working many years without problems.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "13d723ba98545c451bb40711e718087d28985b0f", "tree": "7d6a5ebc7338581c1f10c7c58cc0a0a2e92cb03c", "parents": [ "fda23faaff3b28a987c22da5f3a17b9f3d4acef8" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Sun Nov 13 15:21:58 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 17:54:35 2011 -0200" }, "message": "[media] cxd2820r: check bandwidth earlier for DVB-T/T2\n\nIt is param that could be potentially unsupported and\ndue to that it is good idea to check it very first.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "fda23faaff3b28a987c22da5f3a17b9f3d4acef8", "tree": "e4dd0371287b0aef94fbd33249181603b11595b5", "parents": [ "8cffcc78996c25a04423e294faa1bb5bba3e420e" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Sun Nov 13 14:41:25 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 17:54:04 2011 -0200" }, "message": "[media] cxd2820r: switch to .get_if_frequency()\n\nAll tuners used with cxd2820r offers IF frequency so switch that.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "6d42b218b43f300d0787df7984c8f789de24c6e7", "tree": "c1309c1b1928d0c0f5d02e6881eee52cec95fe16", "parents": [ "522fdf731946301ab7a5ecf854cbe89462397b81" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Sun Nov 13 00:26:17 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 17:52:39 2011 -0200" }, "message": "[media] af9013: use .get_if_frequency() when possible\n\nGet IF frequency from tuner if tuner provides it.\n\nRemove TDA18271 and TDA18218 IF frequency hacks since both tuners provides .get_if_frequency().\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4a5006f68d6b336564eb1e4cbb1f66d234958889", "tree": "92182e1bb0b9d8defb5caf5f1518d01f40c4972d", "parents": [ "8503232f2e9604d844d8f52ddea2e55ccc6c38f6" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 15:04:18 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 15:04:18 2011 -0200" }, "message": "[media] firedtv-avc: Fix compilation warnings\n\ndrivers/media/dvb/firewire/firedtv-avc.c: In function ‘avc_tuner_tuneqpsk’:\ndrivers/media/dvb/firewire/firedtv-avc.c:394:4: warning: enumeration value ‘ROLLOFF_15’ not handled in switch [-Wswitch]\ndrivers/media/dvb/firewire/firedtv-avc.c:394:4: warning: enumeration value ‘ROLLOFF_13’ not handled in switch [-Wswitch]\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "9369cc96af2d5e093ed7f0ac9671f4b30d30af86", "tree": "0ea5fafaca579eee586994ee309b59a18b7a2452", "parents": [ "a23d9d1227f05cf96d195401fe2af2c14ea44b92" ], "author": { "name": "Dan Carpenter", "email": "dan.carpenter@oracle.com", "time": "Tue Oct 18 02:12:09 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 14:26:02 2011 -0200" }, "message": "[media] av7110: wrong limiter in av7110_start_feed()\n\nSmatch complains that the wrong limiter is used here:\ndrivers/media/dvb/ttpci/av7110.c +906 dvb_feed_start_pid(12)\n\terror: buffer overflow \u0027npids\u0027 5 \u003c\u003d 19\n\nHere is the problem code:\n 905 i \u003d dvbdmxfeed-\u003epes_type;\n 906 npids[i] \u003d (pid[i]\u00260x8000) ? 0 : pid[i];\n\n\"npids\" is a 5 element array declared on the stack. If\ndvbdmxfeed-\u003epes_type is more than 4 we probably put a (u16)0 past\nthe end of the array.\n\nIf dvbdmxfeed-\u003epes_type is over 4 the rest of the function doesn\u0027t\ndo anything. dvbdmxfeed-\u003epes_type is capped at less than\nDMX_TS_PES_OTHER (20) in the caller function, but I changed it to\nless than or equal to DMX_TS_PES_PCR (4).\n\nSigned-off-by: Dan Carpenter \u003cdan.carpenter@oracle.com\u003e\nAcked-by: Oliver Endriss \u003co.endriss@gmx.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a23d9d1227f05cf96d195401fe2af2c14ea44b92", "tree": "3ebdf35eaac18cf40dbda4ff3f9b4b2f79d211ac", "parents": [ "2e962f4efa944d47bbfacdd7f93fb21a99272357" ], "author": { "name": "Jose Alberto Reguero", "email": "jareguero@telefonica.net", "time": "Sun Oct 16 07:36:57 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 24 14:25:17 2011 -0200" }, "message": "[media] TT CT-3650 i2c fix\n\nThis patch fix a bug in the i2c code of ttusb2 driver.\n\nSigned-off-by: Jose Alberto Reguero \u003cjareguero@telefonica.net\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "12cbfd0a3c52a52c2948c91b9e62e73c468d1572", "tree": "9252b3929159a83fc81ca0a48706bfa959660967", "parents": [ "b32e724308300a6ecead0f4895f0452a06a4291d", "cfcfc9eca2bcbd26a8e206baeb005b055dbf8e37" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed Nov 23 19:42:09 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed Nov 23 19:42:09 2011 -0200" }, "message": "Merge tag \u0027v3.2-rc2\u0027 into staging/for_v3.3\n\n* tag \u0027v3.2-rc2\u0027: (3068 commits)\n Linux 3.2-rc2\n hfs: add sanity check for file name length\n fsl-rio: fix compile error\n blackfin: Fixup export.h includes\n Blackfin: add serial TX IRQ in individual platform resource\n virtio-pci: fix use after free\n ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression)\n drm/radeon/kms/combios: fix dynamic allocation of PM clock modes\n [CPUFREQ] db8500: fix build error due to undeclared i variable\n bma023: Add SFI translation for this device\n vrtc: change its year offset from 1960 to 1972\n ce4100: fix a build error\n arm/imx: fix imx6q mmc error when mounting rootfs\n arm/imx: fix AUTO_ZRELADDR selection\n arm/imx: fix the references to ARCH_MX3\n ARM: mx51/53: set pwm clock parent to ipg_perclk\n btrfs: rename the option to nospace_cache\n drm/radeon/kms/pm: switch to dynamically allocating clock mode array\n drm/radeon/kms: optimize r600_pm_profile_init\n drm/radeon/kms/pm: add a proper pm profile init function for fusion\n ...\n\nConflicts:\n\tdrivers/media/radio/Kconfig\n" }, { "commit": "de72405f6fc1aaedc0412f88cf681ed33519c49a", "tree": "8ac83a13f2067b95c72a408c4470c2ff8e353a29", "parents": [ "82e7dbbd4a16274b0a7038978734fc11bbf9f4b6" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Nov 20 11:23:24 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Nov 20 11:32:34 2011 -0200" }, "message": "[media] em28xx: Fix CodingStyle issues introduced by changeset 82e7dbb\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "82e7dbbd4a16274b0a7038978734fc11bbf9f4b6", "tree": "34ff839a8bb00c75d319c9b0f0216fb7c766783b", "parents": [ "35621030c0bd5cb4f1a345cf2b4a97e290bc244a" ], "author": { "name": "Eddi De Pieri", "email": "eddi@depieri.net", "time": "Sat Nov 19 11:37:14 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Nov 20 11:24:20 2011 -0200" }, "message": "[media] em28xx: initial support for HAUPPAUGE HVR-930C again\n\nWith this patch I try again to add initial support for HVR930C.\n\nTested only DVB-T, since in Italy Analog service is stopped.\n\nActually \"scan -a0 -f1\", find only about 50 channel while 400 should\nbe available.\n\n[mchehab@redhat.com: Tested with DVB-C and fixed a few whitespace issues]\nTested-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\nSigned-off-by: Eddi De Pieri \u003ceddi@depieri.net\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e6f1227e8bc8a2ea2d76d09e19c89fa66c2f3a4c", "tree": "4f0f965bd2a4a544811190c22cdb9c3dd82d1db2", "parents": [ "3455229fd6a51978439f9c6256d677b745fad06b", "1249a3a82d08d73ece65ae79e0553cd0f3407a15" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Nov 12 00:03:50 2011 -0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Nov 12 00:03:50 2011 -0200" }, "message": "Merge branch \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media\n\n* \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:\n [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls\n [media] v4l2-event: Don\u0027t set sev-\u003efh to NULL on unsubscribe\n [media] v4l2-event: Remove pending events from fh event queue when unsubscribing\n [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL\n [media] MAINTAINERS: add a maintainer for s5p-mfc driver\n [media] v4l: s5p-mfc: fix reported capabilities\n [media] media: vb2: reset queued list on REQBUFS(0) call\n [media] media: vb2: set buffer length correctly for all buffer types\n [media] media: vb2: add a check for uninitialized buffer\n [media] mxl111sf: fix build warning\n [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi\n [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config\n [media] mxl111sf: fix return value of mxl111sf_idac_config\n [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls\n" }, { "commit": "2440f7aff46af4187d0518e92adaddf475aa82b0", "tree": "c01e1ec4c8845c0704d0d6699418f8b7f386fa52", "parents": [ "39ce61a846c8e1fa00cb57ad5af021542e6e8403" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Nov 11 20:26:03 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Nov 11 20:26:03 2011 -0200" }, "message": "[media] Properly implement ITU-T J.88 Annex C support\n\nThe Annex C support were broken with the previous implementation,\nas, at xc5000 and tda18271c2dd, it were choosing the wrong bandwidth\nfor some symbol rates.\n\nAt DRX-J, it were always selecting Annex A, even having Annex C\nsupport coded there.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "39ce61a846c8e1fa00cb57ad5af021542e6e8403", "tree": "fc2ece73b3c54a805f9ac85d390f2388f741b46c", "parents": [ "e9eb0dadba932940f721f9d27544a7818b2fa1c5" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Nov 11 12:46:23 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Nov 11 12:46:23 2011 -0200" }, "message": "[media] dvb: Allow select between DVB-C Annex A and Annex C\n\nDVB-C, as defined by ITU-T J.83 has 3 annexes. The differences between\nAnnex A and Annex C is that Annex C uses a subset of the modulation\ntypes, and uses a different rolloff factor. A different rolloff means\nthat the bandwidth required is slicely different, and may affect the\nsaw filter configuration at the tuners. Also, some demods have different\nconfigurations, depending on using Annex A or Annex C.\n\nSo, allow userspace to specify it, by changing the rolloff factor.\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "fdb5a9111ef77d537efb86e90e8073ebfd0b553e", "tree": "5e6a51fb1a6d2882c5428655df53854ce6aa7b0d", "parents": [ "34490a0a3dfd9c048abc5b9a3ce86fb0fbf881cf" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Nov 06 18:30:26 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Nov 08 11:37:41 2011 -0200" }, "message": "[media] Support for Sveon STV22 (IT9137)\n\nThis indeed a clone of Kworld UB499 2T\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "3339a5b165c2769a84346cac342ade67d7b7a510", "tree": "54c6996243790a4618f365e5f0d2fb716bafc233", "parents": [ "c540d9f13d1f0f6913434b0b8241bb6270818769" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Nov 06 11:19:14 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Nov 08 11:23:03 2011 -0200" }, "message": "[media] it913x-fe ver 1.10 correct SNR reading from frontend\n\nCorrection of reading from frontend and represents\na SNR nonlinear scale of minimum signal to full signal.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "3822c7cef7b422833f1b58949a01bd87b822d280", "tree": "3571d74d19bd82616b0a3908367db6c8fcb78ad9", "parents": [ "2da12fcbea0a2faa94a5d4e58eb2f0f79f9739db" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sun Nov 06 10:24:30 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Nov 08 10:45:19 2011 -0200" }, "message": "[media] it913x ver 1.09 support for USB 1 devices (IT9135)\n\nIT9135 devices do support USB 1.\nSupport added with restricton on pid count to 5.\nIT9137 devices wil not connect in USB 1 mode.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "f7901f9b4ae06d65537ff3db8605e657f6d4afce", "tree": "15c5c3971eb4388a9d9b631ff14f29c21559ecf6", "parents": [ "ff17999184ed13829bc14c3be412d980173dff40" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Thu Nov 03 08:39:12 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Nov 08 08:23:22 2011 -0200" }, "message": "[media] mxl111sf: add mxl111sf_tuner_get_if_frequency\n\nReported-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ff17999184ed13829bc14c3be412d980173dff40", "tree": "1a9b48ead56fb056eb98d89f82351355dadb5330", "parents": [ "2b3c13ecce3bc0fbdeb5ef0596b350dc702d01d5" ], "author": { "name": "Josh Boyer", "email": "jwboyer@redhat.com", "time": "Wed Nov 02 16:39:58 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:48:18 2011 -0200" }, "message": "[media] ttusb2: Don\u0027t use stack variables for DMA\n\nThe ttusb2_msg function uses on-stack variables to submit commands to\ndvb_usb_generic. This eventually gets to the DMA api layer and will throw a\ntraceback if the debugging options are set.\n\nThis allocates the temporary buffer variables with kzalloc instead.\n\nFixes https://bugzilla.redhat.com/show_bug.cgi?id\u003d734506\n\nSigned-off-by: Josh Boyer \u003cjwboyer@redhat.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e836a1c078e230dd5a94bb086b186c2be3ec6a84", "tree": "d8f3a184d5edcb73f4f4004f5368b7eb98b2f220", "parents": [ "cd834fa693160914029fee128f52e87a79d3e480" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 23:46:46 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:37:43 2011 -0200" }, "message": "[media] mxl111sf: fix build warning\n\nfix build warning:\n\tvariable ‘ret’ set but not used in function ‘mxl111sf_i2c_readagain’\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "cd834fa693160914029fee128f52e87a79d3e480", "tree": "54137606ae6cf190b265f2c44f3373891c1af224", "parents": [ "2f4133de28edafcaac3ce6b57faf8f40ed2ff1b9" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 23:31:04 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:36:36 2011 -0200" }, "message": "[media] mxl111sf: remove pointless if condition in mxl111sf_config_spi\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "2f4133de28edafcaac3ce6b57faf8f40ed2ff1b9", "tree": "46c67cace85887bef3af32fabcd34fb65aa8d65e", "parents": [ "a9380ba11fc384a52bcee0884ca6dd069deb6b1b" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 23:29:17 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:36:07 2011 -0200" }, "message": "[media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "a9380ba11fc384a52bcee0884ca6dd069deb6b1b", "tree": "ccfde7aba1d245d2502bc1b8eb8b9b27a63795d4", "parents": [ "241fa6e42f5462a82f00ddf5169628a8c3976548" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 23:20:41 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:29:46 2011 -0200" }, "message": "[media] mxl111sf: fix return value of mxl111sf_idac_config\n\nmxl111sf_idac_config was incorrectly returning val instead of ret\n\nSigned-off-by: Michael Krufky \u003cmkrufky@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "2b3c13ecce3bc0fbdeb5ef0596b350dc702d01d5", "tree": "f7e5abec3e8d046064fa710126f01d5520ad2dd0", "parents": [ "b7d425d39179e125604cbf451a06d3204d2e1398" ], "author": { "name": "tvboxspy", "email": "tvboxspy@gmail.com", "time": "Mon Oct 31 12:06:34 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:25:41 2011 -0200" }, "message": "[media] it913x-fe ver 1.09 amend adc table entries\n\nAmend adc table entries and size.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "b7d425d39179e125604cbf451a06d3204d2e1398", "tree": "694e59a80de14465372cfe3da31ce0f14b1a7a15", "parents": [ "ead32d5357e4aae732ccd7427073ab4bf30d3068" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Mon Oct 31 12:02:08 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:24:38 2011 -0200" }, "message": "[media] it913x Support it9135 Verions 2 chip\n\nSupport for version 2 type chips and other LNA versions of version 1\n\nScripts may be compressed slightly at a later stage.\n\nTODO\nFirmware loader\nHowever, things are a little confusing, it is not clear that\ndvb-usb-it9137-01.fw does not work with version 2 chips\nas in recent files both firmwares are the same.\n\nShould be applied to: 8133 Support for single ITE 9135 device.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "ead32d5357e4aae732ccd7427073ab4bf30d3068", "tree": "7607112de5d1b690751442b2d3cf5aebcb5f324a", "parents": [ "19661c08fe11590e04832ed8b3cabe5e4bf11e48" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 08:12:54 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:20:17 2011 -0200" }, "message": "[media] s5h1411: Calculate signal strength shown as percentage from SNR up to 35dB\n\nAs done first in lgdt330x.c, calculate signal strength from SNR up to 35dB\nEven though the SNR can go higher than 35dB, there is some comfort factor\nin having a range of strong signals that can show at 100%\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Devin Heitmueller \u003cdheitmueller@kernellabs.com\u003e\nSigned-off-by: Steven Toth \u003cstoth@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "19661c08fe11590e04832ed8b3cabe5e4bf11e48", "tree": "d5b451a31eff23314ffc116000ddab2cd1c0c659", "parents": [ "5279b1ff3699153a53d7ca030b5fb95950001c36" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 08:12:18 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:19:51 2011 -0200" }, "message": "[media] s5h1409: Calculate signal strength shown as percentage from SNR up to 35dB\n\nAs done first in lgdt330x.c, calculate signal strength from SNR up to 35dB\nEven though the SNR can go higher than 35dB, there is some comfort factor\nin having a range of strong signals that can show at 100%\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Devin Heitmueller \u003cdheitmueller@kernellabs.com\u003e\nSigned-off-by: Steven Toth \u003cstoth@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "5279b1ff3699153a53d7ca030b5fb95950001c36", "tree": "cc56ed39e76abc728b117dc46d8a464ef5037e70", "parents": [ "49a0513c1fca2c43b14416f3f40220fa01ab5e39" ], "author": { "name": "Michael Krufky", "email": "mkrufky@linuxtv.org", "time": "Mon Oct 31 08:11:00 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 13:19:13 2011 -0200" }, "message": "[media] au8522: Calculate signal strength shown as percentage from SNR up to 35dB\n\nAs done first in lgdt330x.c, calculate signal strength from SNR up to 35dB\nEven though the SNR can go higher than 35dB, there is some comfort factor\nin having a range of strong signals that can show at 100%\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Devin Heitmueller \u003cdheitmueller@kernellabs.com\u003e\nSigned-off-by: Steven Toth \u003cstoth@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "8f4ffb1d4752ebce153e88266ac1164e8ecc5854", "tree": "2c19619ec1f2eef52f0f66b0b8554611a16bf76d", "parents": [ "4048da2fa3c8c5088901d2adc4f7b5b5ccc05e79" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Thu Sep 29 20:36:33 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 10:34:19 2011 -0200" }, "message": "[media] anysee: fix style issues\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4048da2fa3c8c5088901d2adc4f7b5b5ccc05e79", "tree": "6e6a9c379a58d14ff6361ef073284a1a9a10f400", "parents": [ "05cd37def5e697e158470d826cb75c5607c04bd1" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Thu Sep 29 20:28:53 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 10:33:53 2011 -0200" }, "message": "[media] anysee: add control message debugs\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "05cd37def5e697e158470d826cb75c5607c04bd1", "tree": "73e068946c2bea65be8756c80c31a698dca8865b", "parents": [ "be94351e592cb71fb61aa8eeed7bf3f877dc6fff" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Mon Sep 05 23:33:04 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 10:33:15 2011 -0200" }, "message": "[media] anysee: CI/CAM support\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "be94351e592cb71fb61aa8eeed7bf3f877dc6fff", "tree": "a6140a60b0a71842ee0005c75c51a4eaaffde80a", "parents": [ "608add85decc7a13194072fbb0c6aadc89d394e5" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Mon Sep 05 22:10:05 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 10:33:13 2011 -0200" }, "message": "[media] anysee: I2C gate control DNOD44CDH086A tuner module\n\nDNOD44CDH086A (NXP TDA18212) tuner module is not connected to\ndemodulator I2C gate. Instead demodulator gate it uses external\nGPIO driven gate. Override demodulator I2C gate control with\nown in that case.\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "608add85decc7a13194072fbb0c6aadc89d394e5", "tree": "18928114b8a7d7271d95fc8f6b4753cbcce5424e", "parents": [ "b682ad1d178d1686a4db07535d1e611342cde012" ], "author": { "name": "Antti Palosaari", "email": "crope@iki.fi", "time": "Fri Aug 12 18:29:46 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Nov 07 10:26:57 2011 -0200" }, "message": "[media] anysee: add support for Anysee E7 T2C\n\nSigned-off-by: Antti Palosaari \u003ccrope@iki.fi\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "32aaeffbd4a7457bf2f7448b33b5946ff2a960eb", "tree": "faf7ad871d87176423ff9ed1d1ba4d9c688fc23f", "parents": [ "208bca0860406d16398145ddd950036a737c3c9d", "67b84999b1a8b1af5625b1eabe92146c5eb42932" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Nov 06 19:44:47 2011 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Nov 06 19:44:47 2011 -0800" }, "message": "Merge branch \u0027modsplit-Oct31_2011\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux\n\n* \u0027modsplit-Oct31_2011\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)\n Revert \"tracing: Include module.h in define_trace.h\"\n irq: don\u0027t put module.h into irq.h for tracking irqgen modules.\n bluetooth: macroize two small inlines to avoid module.h\n ip_vs.h: fix implicit use of module_get/module_put from module.h\n nf_conntrack.h: fix up fallout from implicit moduleparam.h presence\n include: replace linux/module.h with \"struct module\" wherever possible\n include: convert various register fcns to macros to avoid include chaining\n crypto.h: remove unused crypto_tfm_alg_modname() inline\n uwb.h: fix implicit use of asm/page.h for PAGE_SIZE\n pm_runtime.h: explicitly requires notifier.h\n linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h\n miscdevice.h: fix up implicit use of lists and types\n stop_machine.h: fix implicit use of smp.h for smp_processor_id\n of: fix implicit use of errno.h in include/linux/of.h\n of_platform.h: delete needless include \u003clinux/module.h\u003e\n acpi: remove module.h include from platform/aclinux.h\n miscdevice.h: delete unnecessary inclusion of module.h\n device_cgroup.h: delete needless include \u003clinux/module.h\u003e\n net: sch_generic remove redundant use of \u003clinux/module.h\u003e\n net: inet_timewait_sock doesnt need \u003clinux/module.h\u003e\n ...\n\nFix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in\n - drivers/media/dvb/frontends/dibx000_common.c\n - drivers/media/video/{mt9m111.c,ov6650.c}\n - drivers/mfd/ab3550-core.c\n - include/linux/dmaengine.h\n" }, { "commit": "bc54919f83df61860c7a183016bbced054f9e474", "tree": "fe099dd8f5381d0e2ec57bbba9ef85fc94d380d2", "parents": [ "efabaaf38a6cac929650943151e679f2b5cdae8b" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Fri Oct 14 19:54:11 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 03 18:33:58 2011 -0200" }, "message": "[media] it913x [VER 1.07] Support for single ITE 9135 devices\n\nSupport for single ITE 9135 device.\n\nOnly single devices have been tested. Dual ITE 9135 devices\nshould work, but have not been tested.\n\nTODOs\nsupport for ver 2 chip\nconfig for other tuner types.\nrework of firmware file.\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4860c73804c6e7ef8e69f98958489bb2bea6f6d2", "tree": "6d8dc4ca7794478274e011e5fae4fd1005cf6877", "parents": [ "d6ce55de3abcc4910fef1d79212a17480c154704" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Nov 01 22:23:55 2011 -0200" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 03 07:59:03 2011 -0200" }, "message": "staging: Move media drivers to staging/media\n\nIn practice, it is being hard to distinguish when a patch\nshould go to staging tree or to the media tree. Better\nto distinguish it, by putting the media drivers at a\nseparate staging directory. Newer staging drivers that include\nanything with \"dvb*.h\", \"v4l2*.h\" or \"videodev2.h\" should\ngo to the drivers/staging/media tree.\n\nAcked-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "539b469518b45c0b5915bec3e258e21e03667084", "tree": "772232abbcb94f0037f3933c749faec509e81b1b", "parents": [ "7e8d8f6df3e8f26547b3b986c3946b1f8a6bd6c1" ], "author": { "name": "Michael Krufky", "email": "mkrufky@kernellabs.com", "time": "Sun Oct 23 10:46:13 2011 +0100" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 03 07:42:46 2011 -0200" }, "message": "[media] mxl111sf: update demod_ops.info.name to \"MaxLinear MxL111SF DVB-T demodulator\"\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "7e8d8f6df3e8f26547b3b986c3946b1f8a6bd6c1", "tree": "df4e0591f0f8fcb760636c3fefc116ba5afd0e50", "parents": [ "4f98480f32fb11af40de3947cc5d500ec9691726" ], "author": { "name": "Michael Krufky", "email": "mkrufky@kernellabs.com", "time": "Thu Oct 20 15:42:34 2011 +0100" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 03 07:42:43 2011 -0200" }, "message": "[media] mxl111sf: disable snr / ber calculations for DVB-T\n\nLeaving this code enabled breaks the build on some architectures,\nand we shouldn\u0027t have any floating point math in the kernel, anyway.\n\nThese macros need to be re-written, but it\u0027s harmless to simply\nreturn zero for now.\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4f98480f32fb11af40de3947cc5d500ec9691726", "tree": "444758763bc3f9a4d715d4edb4bf2e8f0ac4675b", "parents": [ "e92f9a56815d8566dcb6f98aa0ed118d66881a59" ], "author": { "name": "Michael Krufky", "email": "mkrufky@kernellabs.com", "time": "Sat Oct 15 23:10:15 2011 +0100" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 03 07:42:36 2011 -0200" }, "message": "[media] mxl111sf: add DVB-T support\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e92f9a56815d8566dcb6f98aa0ed118d66881a59", "tree": "da5d3c5c6fd4f5fe81fb391d737a9dab80a7318a", "parents": [ "c8c741b6eeb7c5c514a3177fd28225bff454b08f" ], "author": { "name": "Michael Krufky", "email": "mkrufky@hauppauge.com", "time": "Thu Sep 08 07:44:15 2011 +0100" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Thu Nov 03 07:42:30 2011 -0200" }, "message": "[media] DVB: add MaxLinear MxL111SF DVB-T demodulator driver\n\nSigned-off-by: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "7a707b89202f905bd9f9fbde326933c59a81214c", "tree": "dbac5d56de8e3a14ca3306d3bdaffb13138def9b", "parents": [ "35a246363ec41e7b19f7887a97ef3d01ab41356a" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Sun Jul 03 14:03:12 2011 -0400" }, "committer": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Mon Oct 31 19:31:51 2011 -0400" }, "message": "drivers/media: Add module.h to all files using it implicitly\n\nA pending cleanup will mean that module.h won\u0027t be implicitly\neverywhere anymore. Make sure the modular drivers in clocksource\nare actually calling out for \u003cmodule.h\u003e explicitly in advance.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\n" }, { "commit": "35a246363ec41e7b19f7887a97ef3d01ab41356a", "tree": "c0b78d95fd89408c5213f23169804d16704b9ac6", "parents": [ "dff65de26ba8128f051799fd6c3660c7162eefc1" ], "author": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Mon Aug 01 15:26:38 2011 -0400" }, "committer": { "name": "Paul Gortmaker", "email": "paul.gortmaker@windriver.com", "time": "Mon Oct 31 19:31:51 2011 -0400" }, "message": "drivers/media: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required\n\nThese two macros were in module.h but now module.h is no longer\nsprayed across every source file imaginable, so the users need\nto expicitly call out their use of them.\n\nSigned-off-by: Paul Gortmaker \u003cpaul.gortmaker@windriver.com\u003e\n" }, { "commit": "1eb63378354ac37b7e27d256bbf84684751bac32", "tree": "0775591a2dced778d1ba0bd8a946831e424d02d7", "parents": [ "1a4ceab195e66bce9c1638fdded6d92988100ba4", "bac2dacd5fb9ddad093d7a2dc5ab44e764874821" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 31 15:42:54 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Mon Oct 31 15:42:54 2011 -0700" }, "message": "Merge branch \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media\n\n* \u0027v4l_for_linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits)\n [media] pctv452e: Remove bogus code\n [media] adv7175: Make use of media bus pixel codes\n [media] media: vb2: fix incorrect return value\n [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES\n [media] cx23885: Stop the risc video fifo before reconfiguring it\n [media] cx23885: Avoid incorrect error handling and reporting\n [media] cx23885: Avoid stopping the risc engine during buffer timeout\n [media] cx23885: Removed a spurious function cx23885_set_scale()\n [media] cx23885: v4l2 api compliance, set the audioset field correctly\n [media] cx23885: hook the audio selection functions into the main driver\n [media] cx23885: add generic functions for dealing with audio input selection\n [media] cx23885: fixes related to maximum number of inputs and range checking\n [media] cx23885: Initial support for the MPX-885 mini-card\n [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use\n [media] cx23885: Enable audio line in support from the back panel\n [media] cx23885: Allow the audio mux config to be specified on a per input basis\n [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs\n [media] cx23885: Name an internal i2c part and declare a bitfield by name\n [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming\n [media] cx23885: remove channel dump diagnostics when a vbi buffer times out\n ...\n\nFix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header\nfile rename vs add)\n" }, { "commit": "8a9ea3237e7eb5c25f09e429ad242ae5a3d5ea22", "tree": "a0a63398a9983667d52cbbbf4e2405b4f22b1d83", "parents": [ "1be025d3cb40cd295123af2c394f7229ef9b30ca", "8b3408f8ee994973869d8ba32c5bf482bc4ddca4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 25 13:25:22 2011 +0200" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 25 13:25:22 2011 +0200" }, "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)\n dp83640: free packet queues on remove\n dp83640: use proper function to free transmit time stamping packets\n ipv6: Do not use routes from locally generated RAs\n |PATCH net-next] tg3: add tx_dropped counter\n be2net: don\u0027t create multiple RX/TX rings in multi channel mode\n be2net: don\u0027t create multiple TXQs in BE2\n be2net: refactor VF setup/teardown code into be_vf_setup/clear()\n be2net: add vlan/rx-mode/flow-control config to be_setup()\n net_sched: cls_flow: use skb_header_pointer()\n ipv4: avoid useless call of the function check_peer_pmtu\n TCP: remove TCP_DEBUG\n net: Fix driver name for mdio-gpio.c\n ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT\n rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces\n ipv4: fix ipsec forward performance regression\n jme: fix irq storm after suspend/resume\n route: fix ICMP redirect validation\n net: hold sock reference while processing tx timestamps\n tcp: md5: add more const attributes\n Add ethtool -g support to virtio_net\n ...\n\nFix up conflicts in:\n - drivers/net/Kconfig:\n\tThe split-up generated a trivial conflict with removal of a\n\tstale reference to Documentation/networking/net-modules.txt.\n\tRemove it from the new location instead.\n - fs/sysfs/dir.c:\n\tFairly nasty conflicts with the sysfs rb-tree usage, conflicting\n\twith Eric Biederman\u0027s changes for tagged directories.\n" }, { "commit": "bac2dacd5fb9ddad093d7a2dc5ab44e764874821", "tree": "1b90615cbde40aae1d3aab18735f7f47992338ff", "parents": [ "f1a84c9b0a962a940a1f8b9202d84842e54e8d7c" ], "author": { "name": "Igor M. Liplianin", "email": "liplianin@me.by", "time": "Thu Oct 06 05:15:22 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Wed Oct 19 08:04:06 2011 -0200" }, "message": "[media] pctv452e: Remove bogus code\n\nCurrently, usb_register calls two times with cloned structures, but for\ndifferent driver names. Let\u0027s remove it.\n\nSigned-off-by: Igor M. Liplianin \u003cliplianin@me.by\u003e\nAcked-by: André Weidemann\u003cAndre.Weidemann@web.de\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "39342dbb27323f174b286c9e19b9687d492b2d1a", "tree": "41d4aa97140c5206481c83163b1410c5e977a0cb", "parents": [ "06bd801c23939952bc6e1cf65f0e8c0fff09d2d7" ], "author": { "name": "Lutz Sammer", "email": "johns98@gmx.net", "time": "Fri Oct 07 16:11:37 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Tue Oct 11 18:02:57 2011 -0300" }, "message": "[media] stb0899: Fix slow and not locking DVB-S transponder(s)\n\nIn stb0899_status stb0899_check_data the first read of STB0899_VSTATUS\ncould read old (from previous search) LOOP status bit and the search\nfails on a good frequency.\n\nWith the patch more transponder could be locked and locks about 2*\nfaster.\n\nSigned-off-by: Lutz Sammer\u003cjohns98@gmx.net\u003e\nReviewed-by: Manu Abraham\u003cmanu@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "e30528854797f057aa6ffb6dc9f890e923c467fd", "tree": "ed64c534f443b42fb61a0902e18be6b11385fd44", "parents": [ "64933337e3cb61ca555969a35ab68b477db34ee2" ], "author": { "name": "Malcolm Priestley", "email": "tvboxspy@gmail.com", "time": "Sat Oct 01 09:24:16 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Oct 08 08:03:27 2011 -0300" }, "message": "[media] it913x-fe changes to power up and down of tuner\n\nCurrently the tuner is constantly powered causing these effects.\n1. Remembering last tune channel causing corruptions of changing channel.\n2. Causing corruption on other frontend.\n3. Higher current in standby of demodulator with clock running.\n\nPower sequence now follows;\nPower Up\nTuner on -\u003e Frontend suspend off -\u003e Tuner clk on\nPower Down\nFrontend suspend on -\u003e Tuner clk off -\u003e Tuner off\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "2f4cf2c3a971c4d5154def8ef9ce4811d702852d", "tree": "79cb1bdc2fdf018b31e1fc733e3b11fc0864f354", "parents": [ "4c4364e022f8422e602edbb97a2d873dc0b6c769" ], "author": { "name": "Dan Carpenter", "email": "dan.carpenter@oracle.com", "time": "Thu Sep 29 02:10:06 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Sep 30 13:32:56 2011 -0300" }, "message": "[media] dib9000: release a lock on error\n\nThis lock should be released as well on the error path.\n\nSigned-off-by: Dan Carpenter \u003cdan.carpenter@oracle.com\u003e\nCc: Patrick Boettcher \u003cPatrick.Boettcher@dibcom.fr\u003e\nCc: Olivier Grenie \u003colivier.grenie@dibcom.fr\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4c4364e022f8422e602edbb97a2d873dc0b6c769", "tree": "664c96efee5d6e5d83c0e788a40b68bc71e606c7", "parents": [ "446b792c6bd87de4565ba200b75a708b4c575a06" ], "author": { "name": "Dan Carpenter", "email": "dan.carpenter@oracle.com", "time": "Thu Sep 29 02:09:42 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Sep 30 13:32:00 2011 -0300" }, "message": "[media] mxl111sf: fix a couple precedence bugs\n\nNegate has higher precedence than bitwise AND. I2C_M_RD is 0x1 so\nthe original code is equivelent to just checking if (!msg-\u003eflags).\n\nSigned-off-by: Dan Carpenter \u003cdan.carpenter@oracle.com\u003e\nCc: Steven Toth \u003cstoth@kernellabs.com\u003e\nCc: Michael Krufky \u003cmkrufky@kernellabs.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "395cf9691d72173d8cdaa613c5f0255f993af94b", "tree": "813be524794fe1c0850805d7faca90e45fd0e60b", "parents": [ "e060c38434b2caa78efe7cedaff4191040b65a15" ], "author": { "name": "Paul Bolle", "email": "pebolle@tiscali.nl", "time": "Mon Aug 15 02:02:26 2011 +0200" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Tue Sep 27 18:08:04 2011 +0200" }, "message": "doc: fix broken references\n\nThere are numerous broken references to Documentation files (in other\nDocumentation files, in comments, etc.). These broken references are\ncaused by typo\u0027s in the references, and by renames or removals of the\nDocumentation files. Some broken references are simply odd.\n\nFix these broken references, sometimes by dropping the irrelevant text\nthey were part of.\n\nSigned-off-by: Paul Bolle \u003cpebolle@tiscali.nl\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "9e83b3e434f29d71f923035a6001870d185581ec", "tree": "fa3a819c95ee280148966223d1e2022dafad8394", "parents": [ "0f910bf0008c54b33da5691278c8ee8e8700ac48" ], "author": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Sep 26 16:49:01 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Mon Sep 26 16:50:14 2011 -0300" }, "message": "Revert \"[media] siano: apply debug flag to module level\"\n\nThis reverts commit ea3709435c7f2da8852c3d676874cd727253fc60.\n\nAs reported by Stephen Rothwell:\n\nAfter merging the v4l-dvb tree, today\u0027s linux-next build (x86_64\nallmodconfig) failed like this:\n\nERROR: \"sms_dbg\" [drivers/media/dvb/siano/smsusb.ko] undefined!\nERROR: \"sms_dbg\" [drivers/media/dvb/siano/smsdvb.ko] undefined!\n\nCaused by commit ea3709435c7f (\"[media] siano: apply debug flag to module\nlevel\").\n\nRelevant config:\nCONFIG_SMS_SIANO_MDTV\u003dm\nCONFIG_SMS_USB_DRV\u003dm\nCONFIG_SMS_SDIO_DRV\u003dm\n\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4a6c4a9567aed23cf7e8134c63f3176a57e5572b", "tree": "2176b46417c7e8ba93373f67bfb7d62427df57ee", "parents": [ "aad04c774331890befcd7a77406c2b6f273ab7a9" ], "author": { "name": "Guy Martin", "email": "gmsoft@tuxicoman.be", "time": "Wed Jun 01 11:25:16 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Sep 25 08:45:18 2011 -0300" }, "message": "[media] stv090x: set status bits when there is no lock\n\nCurrently, the stv090x driver only set the status bits to SCVYL when\nthere is a lock. This patch set the right bits even if there is no lock.\n\nSigned-off-by: Guy Martin \u003cgmsoft@tuxicoman.be\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "aad04c774331890befcd7a77406c2b6f273ab7a9", "tree": "75589698af664000f5997802ad884f65efe5e580", "parents": [ "79d06d4dff733ee472e1f8933a33317a18195c0c" ], "author": { "name": "Hans Petter Selasky", "email": "hselasky@c2i.net", "time": "Mon May 23 11:21:47 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Sep 25 08:44:10 2011 -0300" }, "message": "[media] Increase a timeout, so that bad scheduling does not accidentially cause a timeout\n\n--HPS\n\n\u003eFrom 18faaafc9cbbe478bb49023bbeae490149048560 Mon Sep 17 00:00:00 2001\n\nSigned-off-by: Hans Petter Selasky \u003chselasky@c2i.net\u003e\nAcked-by: Manu Abraham \u003cmanu@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "79d06d4dff733ee472e1f8933a33317a18195c0c", "tree": "dfede2845ccd5d1505e5fd5f60a0ad92be4e64a2", "parents": [ "fa0d11873943b29d6c8f57a7d54f77d0439acfd9" ], "author": { "name": "Marko Ristola", "email": "marko.ristola@kolumbus.fi", "time": "Sat Aug 07 08:16:15 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Sep 25 08:43:06 2011 -0300" }, "message": "[media] Refactor Mantis DMA transfer to deliver 16Kb TS data per interrupt\n\nWith VDR streaming HDTV into network, generating an interrupt once per 16kb,\nimplemented in this patch, seems to support more robust throughput with HDTV.\n\nFix leaking almost 64kb data from the previous TS after changing the TS.\nOne effect of the old version was, that the DMA transfer and driver\u0027s\nDMA buffer access might happen at the same time - a race condition.\n\nSigned-off-by: Marko M. Ristola \u003cmarko.ristola@kolumbus.fi\u003e\nReviewed-by: Manu Abraham \u003cmanu@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "fa0d11873943b29d6c8f57a7d54f77d0439acfd9", "tree": "12cd226febadde3be28ef9ca7277df3b289a7366", "parents": [ "d7222e7d6fb06ca3e7aa7a1ab07f8e6c6adb1d22" ], "author": { "name": "Florent AUDEBERT", "email": "florent.audebert@anevia.com", "time": "Fri Jun 11 12:01:25 2010 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sun Sep 25 08:41:23 2011 -0300" }, "message": "[media] stb0899: Removed an extra byte sent at init on DiSEqC bus\n\nI noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC\ntool analyzer.\n\nI removed the register from initialization table and all seem to go well\n(at least for my KNC board).\n\nSigned-off-by: Florent Audebert \u003cflorent.audebert@anevia.com\u003e\nAcked-by: Manu Abraham \u003cmanu@linuxtv.org\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "4e2c53fde651be6225d9f940c02b2eabc2f9591c", "tree": "7427afe586aed591065cae6c6737be6f8df932b3", "parents": [ "600836cc7b049f3eb47e9b39f379aa4b0926188a" ], "author": { "name": "Igor M. Liplianin", "email": "liplianin@me.by", "time": "Fri Sep 23 18:33:50 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Sat Sep 24 00:07:42 2011 -0300" }, "message": "[media] dvb: Add support for pctv452e\n\nSigned-off-by: Igor M. Liplianin \u003cliplianin@me.by\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" }, { "commit": "7c2808e2fd4c30a19268215c2958d4a340f057c5", "tree": "1f2e94c1cbcf0fe1af2a07c5d00c8a971582fb8a", "parents": [ "2ba0f94796febc26bbb12095f6ad15c2397de474" ], "author": { "name": "tvboxspy", "email": "tvboxspy@gmail.com", "time": "Wed Sep 21 19:06:58 2011 -0300" }, "committer": { "name": "Mauro Carvalho Chehab", "email": "mchehab@redhat.com", "time": "Fri Sep 23 23:08:17 2011 -0300" }, "message": "[media] it913x-fe: correct tuner settings\n\nCorrect tuner settings for more accuracy. This now makes the tuner\n section more compatible with other versions of the IT913X\n series.\n\nTODOs\nVersion 2 chip\n\nSigned-off-by: Malcolm Priestley \u003ctvboxspy@gmail.com\u003e\nSigned-off-by: Mauro Carvalho Chehab \u003cmchehab@redhat.com\u003e\n" } ], "next": "2ba0f94796febc26bbb12095f6ad15c2397de474" }