)]}'
{
  "commit": "da6b2d01d6bd2e79fd4f7a08acd37dc4e8fcdce8",
  "tree": "8cc7fcfa31f2d439545ff8d16ef188c1b1b7614c",
  "parents": [
    "91aa9fb573fcc50bc74d5ee64c7e9b36131f1804"
  ],
  "author": {
    "name": "Michael Chan",
    "email": "mchan@broadcom.com",
    "time": "Fri Aug 19 12:54:29 2005 -0700"
  },
  "committer": {
    "name": "David S. Miller",
    "email": "davem@davemloft.net",
    "time": "Fri Aug 19 12:54:29 2005 -0700"
  },
  "message": "[TG3]: Fix SerDes detection\n\nA problem was reported by Grant Grundler on an HP rx8620 using IOX\nCore LAN partno(A7109-6) 5701 copper NIC. The tg3 driver mistakenly\ndetects this NIC as having a SerDes PHY and link does not come up as a\nresult.\n\nThe problem was caused by an incorrectly programmed eeprom that set the\nNIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit in the NIC_SRAM_DATA_CFG location.\n\nThis patch will override the NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit if a\nvalid PHY ID is read from the MII registers on older 570x chips where\nthe MII interface is not used on SerDes chips. On newer chips such as\nthe 5780 that use MII for both copper and SerDes, SerDes detection must\nrely on the eeprom.\n\nThis patch will make the SerDes detection identical to versions 3.25 and\nolder.\n\nSigned-off-by: Michael Chan \u003cmchan@broadcom.com\u003e\nAcked-by: Grant Grundler \u003ciod00d@hp.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "368b8fb140234e130baebca89121d1d47f7e43cb",
      "old_mode": 33188,
      "old_path": "drivers/net/tg3.c",
      "new_id": "d75c96de96e4feb51c5b9a9026a1ab2cf8b29fab",
      "new_mode": 33188,
      "new_path": "drivers/net/tg3.c"
    }
  ]
}